Plush Circles are a brand new 5mm length short fur LAV covers. Designed to use under costumes to help disguise mics, reduce clothing noise and protect the mic from light wind. 25mm diameter, super soft, re-useable lav mic covers. More About URSA Plush Circles Multipacks contain 3x White, 3x Black, 3x Beige & 30 Stickies. Single Colour Packs contain 9 of one colour & 30 Stickies. Available in 4 colours : Black, White, Beige & Brown. 25mm diameter, re-useable & super soft Low profile lav cover creates less of a lump under costumes.

Read more less

URSA MiniMounts are a slim, low-profile mount designed to be rigged where larger mounts cannot go. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. This MiniMount is deigned to fit the Works with Sanken COS11 MiniMounts are are available in four colours. Black, Brown, Beige, White. There are seven models available, They are designed specifically for the Deity W.Lav Pro, DPA 4060, 4071, 6060, 4660HD, RODE LAV/LAVii, Sanken COS11, Sennheiser MKE1 & MKE2, ME2, Shure Twinplex and Sony ECM-V1. More About URSA MiniMounts Easy to rig beside buttons on shirts where larger mounts will not fit! Their thin shape makes them perfect mounts for rigging on the skin in the cleavage or onto the bra. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. MiniMounts are moulded from hardened plastic. They won't snap under pressure or deform under heat. Each MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11 x 22mm and are designed specifically for MiniMounts. MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 11m wide x 22mm long x 6mm tall. Our 6060 & MKE1 measure 9.5m wide, 20mm long x 5mm tall. The DPA 4060 model also fits a CountryMan B3 with a Cap. The MKE1 model also fits a Countryman B6. The MKE1 & MKE2 models are designed to be used WITHOUT caps on the mics. This allows the mount to be as small as possible. Made for: Sanken COS11 Dimension: 22 x 11 x 6mm Notes: Works with Deity W.Lav Pro

Read more less

Pro Gaff is a matte cloth tape with a rubber based adhesive system. Available in a range of colours. Strong tape but easy to tear. 2" in size (in metric that's 48mm roughly) 50 yards long. (yes they measure in yards) These tapes are used for such things as: Labelling boxes Using different colours to differentiate between units Making actor marks Anything that needs to be highlighted with a brighter coloured tape Also can be used for: Temporary holding of light fixtures, wire and cable hold down, marking and labelling equipment cases. High visibility colours for marking of stairs, exits or sets. Dance floor splicing and bundling of cables. Benefits: High strength, high-performance adhesive system. Highly conformable to irregular surfaces. Weather resistant. High thread count. Abrasion resistant. Hand Tearable. Smooth, controlled unwind. Features: Printable, Quick Stick, Good Adhesion, Good Tensile Strength, Clean Removal, Outdoor Use, Highly Conformable, Hand Tearable, Easy Unwind, Good Abrasion Resistance, Weather Resistant *We cannot guarantee the colour you see on your screen is that of what the tape looks like. Its difficult to accurately display the true colours of these tapes on a monitor.

Read more less

The 1050 comes with a rubber liner as standard and is also available with pick 'n' pluck foam. The case can be bought in black, yellow or clear (with a black or yellow liner), depending on your preference. The Micro Cases are designed to protect small, valuable items such as mobiles phone and digital cameras.

Read more less

Manufacturers description: Gorilla Tape has taken duct tape to a new level. This double thick adhesive tape surpasses ordinary duct tapes, making the list of uses virtually endless. Made with double thick adhesive, strong reinforced backing, and a tough all-weather shell, it's the biggest, strongest, toughest thing ever to happen to duct tape. It sticks to rough and uneven surfaces, including wood, stone, stucco and brick, that ordinary duct tapes cant hold. To us, it's made the way tape should be: The Toughest on Planet Earth. Product Features: Double-Thick Adhesive: Grips smooth, rough and uneven surfaces Tough, Reinforced Backing: The tight weave contributes to the heft, but Gorilla Tape can still be ripped by hand. Rugged, Weather-Resistant Shell: Withstands moisture, UV rays and temperature extremes

Read more less

Shurtape Console Tape is a premium paper tape that is printable and removes cleanly. Is ideal for use on sound and lighting boards. Easily tearable by hand this tape also leaves minimal to no residue when peeling off and can be used for writing on without any fuss. Features: Can write on it. Low/No Residue Tearable by hand Flexible Resistant to water, oil, and solvents Provides excellent adhesion Meets LHAMA requirements for use in arts and crafts

Read more less

No messing about anymore in a camera prep with loose cables, this secure option will give you peace of mind wherever the camera goes. Whether you are doing handheld, Steadicam or a car rig going 60Mph, these cables will always stay where you put them. 5 x 13mm Screws and Cable Clamps Available in Blue, Red or Yellow Knurled thumb screws offer quick and easy tool-less adjustment.

Read more less

The BIC Cristal - probably the best-known ballpoint in the world. It's inexpensive, it's reliable, it writes really smoothly and it's safe to say there can't be many households without at least one Cristal stuffed into a kitchen drawer. It's available in the good old basic colours of black and blue; if you want something a bit fancier, try the Cristal Fun (same pen, just funkier ink colours). Nothing more to say, really. Clear barrel; cap denotes ink colour. This is for 1 pen.

Read more less

3M™ Durapore™ Tape is a strong, silk-like cloth tape which resists stretching and provides additional support. Our tapes have a high adhesive strength. Strong, silk-like fabric backing provides additional support and resists stretching Very high adhesive strength allows for use on challenging applications Ideal for securing Lav mics ad concealers *Supplied as non-sterile due to nature of our storage. Our stock is not intended for medical use.

Read more less

THE INVISIBLE Lav COVERS FUR OUTDOOR THESE FUR PADS ELIMINATE RUSTLING AND WIND NOISES FROM YOUR Lav MIC The Invisible Lav Covers FUR OUTDOOR allow you to easily mount and hide your Lavalier microphones directly on the skin or on clothes.  Each package of Invisible Lav Covers FUR OUTDOOR consists of 9 pieces of fur fabric in 3 colors: Black, Beige and White together with 30 pieces of Bubblebee Industries’ high quality Invisible Lav Tape. FEATURES Designed to be Used Under Clothes Eliminate Rustling and Wind Noises Stick Directly to the Skin or Clothes Hypo Allergic / Allergy Tested 3 Black, 3 Beige and 3 White Reusable Fur Pads 30 Pieces of High Quality Tape Designed in Denmark by Sound Lovers, for Sound Lovers The transparent double-sided Invisible Lav Tape keeps your microphone and fur fabric solid in place on one side and sticks directly to the skin or to clothes on the other side allowing the microphone to be safely and securely mounted almost anywhere. It’s all about being creative: under the collar, next to a buttonhole, or under the clothes in the chest area. The tape also has a small piece cut out in the middle of the tape, which is to be saved and used for fixing. While the fur fabric can be used up to four times, the tape must be replaced after each use. Since the Invisible Lav Covers FUR OUTDOOR package comes with 30 pieces of tape, you will be able to do 30 mounts per pack.

Read more less

WHERE SIMPLICITY MEETS EFFECTIVENESS The Cable Saver is an ingenious invention that adds strain relief and removes cable noise from your lav mic at the same time. The Cable Saver saves your cable from breaking at the combiner, reduces cable friction noise and adds elasticity to your microphone cable. Designed in Denmark by sound lovers, for sound lovers. THE CABLE SAVER'S MAIN FEATURES Saves your cable from breaking at the combiner Reduces cable friction noises Adds elasticity to your microphone cable Pack of 4 pieces Designed in Denmark by sound lovers, for sound lovers The Cable Saver is an original invention and design by Bubblebee Industries that dramatically reduces the cost of repairs of Lavalier microphone cables, connectors and transmitters while at the same time reducing cable friction noise to a very minimum. SO HOW DOES IT WORK? Put your Lavalier microphone cable through one of the rubber eyes of the Cable Saver. Wind the cable tight around the middle 3-4 times and through the rubber eye in the other end of the Cable Saver. That’s it. Now, if you drop the transmitter or the microphone cable gets caught in something, the cable saver will act as a spring allowing for a soft fall that will relieve the strain on your cable and save your equipment. An added benefit is that the Cable Saver reduces the cable friction noise so drastically that the noise almost disappears. That means no more scratching and rattling noises when someone accidentally touches the microphone cable. WHAT'S INCLUDED Each package comes with four Cable Savers – enough to save 2-4 microphones. They are made of durable black rubber that always comes back to its’ original form. We suggest you mount The Cable Saver indoors and under calm conditions since it is a rather small object. SPECIFICATIONS: Measurements: 2.5 cm x 0.5 cm (0.9” x 0.19”). Weight: 2,5g (incl. packaging) Item code: BBI-LCS-4BK NB: We do not recommend you to use The Cable Saver with a Countryman B6.We have experienced that the microphone/cable is too small and fragile.

Read more less

Orange Sticks (18cm) Pack of 10.

Read more less

100 x Anti-Static AF Screen-Clene Wipes in Resealable Tub Pack Qty: 100 Tub Removes bacterial, dirt, dust and grease Can be used on mobile phones, monitors and touch screens.

Read more less

#1 longest-lasting AA battery Superior performance in extreme temperatures from -40 to 140 degrees Fahrenheit – great for use in all seasons Holds power in storage for up to 20 years (AA/AAA) 33% lighter than alkaline batteries (AA/AAA) Guaranteed leak-proof (based on standard use) Energizer Ultimate 1.5V AA or LR6 batteries are capable of lasting up to eight times longer than standard equivalents. Renowned for durability, the Ultimate lithium range is a top choice for devices with occasional high current demands.  A popular battery size, some frequent applications include photography equipment, radio mics compact flashlights, portable radios and larger remote controls. This sealed pack of ten new cells is ideal for home or office use or a workshop spares drawer. Leak-resistant and boasting a shelf life of as long as twenty years at room temperature, Ultimate AA/LR6 Energizer cells deliver reliable power. They continue working in extreme heat and cold: the manufacturer-recommended temperature limits are -40°C (minimum) and 60 degrees Centigrade (maximum). Especially useful in portable appliances, the battery weight of 100 grammes is around 30 per cent less than typical alkaline cells.  Each LR6/AA cylindrical cell measures 51 millimetres (height) by 15 millimetres (diameter). Ultimate AA batteries are direct replacements for size codes AM3, E91, FR6, L91, KAA, MIGNON, MN1500, ND62S, R6, UM3 and 4006. These batteries conform to the international standard of IEC 60086-4.

Read more less

Sticky Circles for extremely sticky situations! URSA Very Stickies are available in packs of 90. They are 24mm diameter pre-cut stickies with peel-off tabs. URSA Very Stickies are also sold with the URSA WireRig for securing this rig onto almost any surface. As the name suggests these stickies are incredibly sticky! Good for when you need as much stick as possible. Warning: Very Stickies are so strong they can damage delicate fabric. They can leave residue and are not rated hypoallergenic. URSA Sticky Circles (Pack of 90) Each 24mm diameter URSA Very Sticky Circle has been pre-cut and has a small peel-off tab for easy & fast use. They are compatible with a variety of mic mounts including RM11s, DPA Concealers and can also be used with URSA MiniMounts. (You get 20 of these stickies with the URSA WireRig.)

Read more less

Lumocolor Whiteboard Pen- Perfect for using on Clapperboards/slates STAEDTLER Lumocolour whiteboard markers have a bullet tip that can produce a drawing line of 2 mm. The ink can be dry-wiped from whiteboards and surfaces such as glass and porcelain without leaving a trace. Can be dry-wiped from whiteboards without leaving a trace Fast-drying, low odour Drysafe - can be left uncapped for days without drying up Improved colour density Locked tip - prevents the tip from being pushed into the barrel. 351-9

Read more less

Rust ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty rusty red colour. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly. Rust- rusty red / brown colour with shades of orange and yellow. Medium density and dries fast. When washed, leaves yellow/brown stains on fabric. Very good when used for shading. Good “reddish” dirt / rust effect. Usage Instructions: Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather. Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.    

Read more less

Ratchet Strap - endless - 4.5m

Read more less

Speciality grade, photographic black masking tape for use in photo studios, film processing labs and darkrooms. Also recommended as a chart tape, for quality photographic reproduction work, cropping and edging negative for contact printing, and sealing camera bellow and film holders against light leaks. Designed with an opaque black matte surface that ensures light-free masking, CP 743 is versatile, reliable and considered to be the "photographer's masking tape." Features & Benefits Speciality grade photographic black masking tape Very high adhesion Light-free masking Good quick stick Highly conformable aka, shuretape, shure tape, ShurTape (Permacel) - Black - 48mm (2") x 27m On a small core for easier carrying

Read more less

Multi-purpose, extremely versatile and built-to-last, this 16mm female tripod adaptor is an indispensable addition to any photographer’s kit. Small and lightweight, it’s the easiest way to get more from you next shoot. Perfect for adding a wide range of accessories to you light stand or turning it into a tripod. Features: Female tripod adaptor with standard 6.4mm screw for versatility Universally compatible 16mm socket Made from lightweight and durable aluminium Supports heavy equipment with ease A portable solution for any kit

Read more less

This lollipop antenna has a RP-SMA Male connector and is compatible with FPV Goggles and Drones. The polarization is RHCP and features an omnidirectional antenna to help maximize the transmission range  Specification: Material - Polycarbonate + ABS Frequency - 5.8 GHz Bandwidth - 500 Mhz (5.5 - 6.0 GHz) Axial ratio - < 1 Gain - 2.8 dBi Radiation efficiency - 98% Polarization - RHCP Weight - 10g Antenna length - 150mm Connector - SMA / RP-SMA

Read more less

MOUNTING A LAVALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. The Lav Concealer for Sony ECM-V1 lav mic is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. The Sony ECM-V1 microphone comes included as standard in their UWP-D range of wireless radio mic kits (UWP-D21, UWP-D26 and UWP-D27). Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape

Read more less

SOFT MINI FOAM MOUNTS WITH FLAT SIDES URSA Mini Foamies have been designed specifically for smaller diameter microphones. These include the DPA 6060, Sennheiser MKE1, Countryman B6 however they also fit well onto Sanken COS11 mics. They are also best suited to be rigged onto the tip of an antennae of your transmitter, this can help reduce the RF loss you can get when an antennae is pressed against the body. Designed with flat sides so they can be stuck directly to skin or costume. The foam provides a soft, quiet buffer to reduce clothing noise. Made from the highest quality sponge. Available in Packs of 12 in Black, Brown, Beige or White. More About URSA Mini Foamies URSA Mini Foamies are compatible with microphones which measure 2-4mm diameter. These include DPA 6060, Sennheiser MKE1, Countryman B6. However they also fit well onto Sanken COS11 mics. Can be rigged on to aerial tips to help reduce RF loss. URSA Mini Foamies measure 22mm length, 14mm width and 7mm tall with a 1.5mm diameter hole that stretches up to 4mm. (Regular URSA Foamies measure 24mm length, 17mm width and 9mm tall with a 2.5mm diameter hole that stretches up to 6mm) Mini Foamies 22 x 14 x 7 mm (LxWxH)1.5 mm Diameter holeStretches to up to 4 mm Sanken COS11,DPA 6060/6061,Countryman B6,Sennheiser MKE1 Regular Foamies 24 x 17 x 9 mm (LxWxH)2.5 mm Diameter holeStretches to up to 6 mm Sanken COS11,DPA 4060/4071Countryman B3,Sennheiser MKE2 & ME2R DE Lavalier

Read more less

This URSA Back Strap allows you to securely rig microphone or IEM packs to the centre of back, between the shoulder blades. Medium size fits a 36-40 inch chest and Large fits a 41-45 inch chest. Adjustable velcro straps Available now in Black & Beige and Small, Medium and Large Transmitter can be rigged with the aerial facing down or up. Fits all transmitter/receiver sizes Rigs pack between the shoulder blades Machine Washable with detergent at 40 Degrees. Hang dry or Tumble Dry. URSA Straps use certified OEKO-TEX hypoallergenic fabric and gripper. URSA Back Strap Demo Product Specifications Strap Type Leg Strap Size Comparison Medium Size 36-40 inch Chest Large Size 41-45 inch Chest     Pouch Size Transmitter Compatibility Universal Pouch Audio Ltd 2040, Mini TX, A10, EN2 Shure PSM 1000, 900, 300, QLX, ULX, AD1, AXT Tascam DR-10L Sony UWP-D11 Saramonic UWMIC9 TX9 Lectrosonics LMb, WM, UM400a, DCHT, SMDB, SMB, LT & SSM Wisycom MPT40 / 41 Zaxcom TRX & ZFR, TRX LA2 & LT2, ZFR 200 & 300 Sennheiser G2, G3, G4, AVX, SK2000, SK5212, SK9000, SK 5212, SK 9000 Micron TX700B, Shure UR1M, ADX 1M, Q5X PlayerMic S

Read more less