Fits: 1510 Mobility Case 1510 Protector Case Dimensions: Int. Length (mm) 494 Int. Width (mm) 268 Int. Depth (mm) 136

Read more less

#1 longest-lasting AA battery Superior performance in extreme temperatures from -40 to 140 degrees Fahrenheit – great for use in all seasons Holds power in storage for up to 20 years (AA/AAA) 33% lighter than alkaline batteries (AA/AAA) Guaranteed leak-proof (based on standard use) Energizer Ultimate 1.5V AA or LR6 batteries are capable of lasting up to eight times longer than standard equivalents. Renowned for durability, the Ultimate lithium range is a top choice for devices with occasional high current demands.  A popular battery size, some frequent applications include photography equipment, radio mics compact flashlights, portable radios and larger remote controls. This sealed pack of ten new cells is ideal for home or office use or a workshop spares drawer. Leak-resistant and boasting a shelf life of as long as twenty years at room temperature, Ultimate AA/LR6 Energizer cells deliver reliable power. They continue working in extreme heat and cold: the manufacturer-recommended temperature limits are -40°C (minimum) and 60 degrees Centigrade (maximum). Especially useful in portable appliances, the battery weight of 100 grammes is around 30 per cent less than typical alkaline cells.  Each LR6/AA cylindrical cell measures 51 millimetres (height) by 15 millimetres (diameter). Ultimate AA batteries are direct replacements for size codes AM3, E91, FR6, L91, KAA, MIGNON, MN1500, ND62S, R6, UM3 and 4006. These batteries conform to the international standard of IEC 60086-4.

Read more less

Rust ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty rusty red colour. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly. Rust- rusty red / brown colour with shades of orange and yellow. Medium density and dries fast. When washed, leaves yellow/brown stains on fabric. Very good when used for shading. Good “reddish” dirt / rust effect. Usage Instructions: Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather. Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.    

Read more less

Ratchet Strap - endless - 4.5m

Read more less

Aluminium Form Holder A4 by Westcott With separating device, laterally-Opening, versatile and practically usable Inner page clip holder Retention tray with attachment strip E-17004 00 aka: Sheet Tin, Form Holder, Neg Report Holder.

Read more less

Filmsticks T-Handle Slotted Screwdriver (10mm) A must for anyone working with cameras, this incredibly handy T-Driver makes tightening those tripod screws easy!  Say goodbye to 'making do' with the wrong tool! No more chewing up your camera screws. No more bashing your knuckles when tightening. This Professional 10mm Slotted Screwdriver with T-Handle Grip makes it easy to work quickly to ensure your screws are tight and your camera is secure Specifications: T-handle: ABS (Acrylonitrile Butadiene Styrene) Plastic Metal part: Carbon Steel 10mm Slotted Driver, 100mm (3.94in) shaft; 136mm (5.35in) Total Length Head Style: Flat (2mm width) Weight and Dimensions: 95mm x 136mm x 21mm (3.74" x 5.35" x 0.87") Approx 101g (3.56oz) net weight A popular alternative to the Facom T-Bar.

Read more less

MOUNTING A LavALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. Compatible with DPA 4060 lavalier microphone. Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape

Read more less

These Market Stall Clips are used for clamping and securing Tarpaulin or any sheet of your choice in place, These clips come in a size of 6 inches / 15cm and made from galvanised steel with a heavy duty coil spring which is strong and durable. Features 6 inches / 15cm long Made from Galvanised Steel 2 inch / 5cm grip opening Strong heavy duty coil spring Ribbed Handles for a better grip aka Swiss Clips

Read more less

FOR ULTIMATE TRANSPARENCY AND INVISIBILITY... The Invisible Lav Covers - Original allow you to easily mount and hide your lavalier microphones directly on the skin or on clothing, whilst protecting your audio against clothing rustle. Each package of The Invisible Lav Covers Big Bag - Original consists of 40 pieces of mesh fabric, each reusable 3-4 times, for at least 120 mounts (choose from black/beige/white). FEATURES: Optimal for use under clothing Provides you with ultimate transparency and invisibility when mounting your lavalier mics Available in black, beige or white Stick directly to the skin or clothing 40 pieces of reusable aerated mesh fabric Each piece can be used at least 3 times, giving you 120 mounts per bag Comes in a useful reusable zip-lock storage pouch Designed in Denmark by Sound Lovers, for Sound Lovers While the fabric can be used many times, you will be able to do a minimum of 120 mounts per pack. Use their transparent, double-sided Invisible Lav Tape (sold separately) to keep your microphone and Invisible Lav Cover firmly in place whilst sticking directly to the skin or to clothing allowing the microphone to be safely and securely mounted almost anywhere. It’s all about being creative: under the collar, next to a buttonhole, or under the clothing in the chest area. Not sure which colour to use? The Invisible Lav Covers - Original are also available in a smaller multipack, that also includes our Invisible Lav Tape. SPECIFICATIONS Each piece of fabric and tape measures 2.2 cm x 2.2 cm (0.86” x 0.86”), and comes in a handy reusable zip-lock storage pouch. Item codes: BBI-ILC-O-40BK/BE/WH Product warranty: This product is covered by their two-year warranty securing against defects in material, design and workmanship. The full-length warranty is available for download here. Also available: Invisible Lav Covers, Big Bag - Fur Outdoor: For ultimate wind protection and fabric noise reductionInvisible Lav Covers, Big Bag - Moleskin: For ultimate invisibility and fabric noise reduction

Read more less

Hook and loop tape comes on a sticky-back self-adhesive liner, making it simple to cut to your desired size. Ideal for endless projects. Strong adhesion offering an instant bond to most surfaces. Offered in 25mm width. Sold by the Metre or pack of 25 Metre Rolls Aka: Velcro

Read more less

Hands-on Heat Protection. World class DuPont Nomex lining encases your hands in a heat and flame resistant barricade throughout the glove. Rated to 250 C for up to 15 seconds, the Phoenix provides a skin-protecting barrier when working with high-temperature items. Specially selected double-layered leather additionally defends the palm and key wear areas against abrasions. A one-piece leather layer on the palm is enhanced with an articulated second layer to allow exceptional freedom of movement as you work. All combined with DuPont Kevlar double stitched seams to brace an incredibly durable glove. EN407: 2004 Clause 2 Contact Heat Performance Level 2 Rated to 250 C for up to 15 seconds Abrasion resistant, double layered leather palm Articulated second layer for exceptional freedom of movement (palm side) DuPont Kevlar double stitched seams Snug fit to minimise snagging Write-on ID Tag

Read more less

Micro Windjammer Rycote has been making Windjammers for professional broadcasters and film-makers for over four decades and are recognised as the industry-standard for wind protection products. These days even the smallest compact cameras allow you to shoot great, high-quality video but if you've ever tried filming outdoors on even a mildly blustery day, you'll know that the wind can wreck your perfectly composed soundtrack in a matter of seconds!Our fantastic Micro Windjammer is easy to fit and provides all-in-one wind protection for your camera's built-in microphone helping you to capture great sounding audio, even outdoors. Designed to help prevent wind noise from destroying the audio recording from your HDSLR camera, camcorder or compact digital camera, the Rycote Micro Windjammer is also compatible with the IPhone, IPad and most other mobile phones. This invaluable piece of kit for all your outdoors recordings is handy, easy to fit and leaves no residue on removal.Made by Rycote in the UK. Each individual pack contains 30 Stickies and 6 reusable grey fur discs. Main Benefits: Micro Windjammer provides versatile wind protection for the built-in microphones on a range of devices Fits over the built-in microphone on HDSLR cameras, camcorders and compact cameras Compatible with iPhone, iPad and most other mobile phones and tablets Greatly reduces wind noise, to help you to capture great audio, to go with your video An invaluable piece of kit for your outdoor recordings great for improving the sound quality of vlogs and YouTube videos Handy, easy to fit, easy to remove and leaves no residue Each individual pack contains 30 Stickies and 6 reusable grey fur discs

Read more less

Lumocolor Whiteboard Pen- Perfect for using on Clapperboards/slates STAEDTLER Lumocolour whiteboard markers have a bullet tip that can produce a drawing line of 2 mm. The ink can be dry-wiped from whiteboards and surfaces such as glass and porcelain without leaving a trace. Can be dry-wiped from whiteboards without leaving a trace Fast-drying, low odour Drysafe - can be left uncapped for days without drying up Improved colour density Locked tip - prevents the tip from being pushed into the barrel. 351-9

Read more less

Nicotine Yellow ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty yellow colour. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly. Nicotine yellow – Light dirty Yellow/Brown colour. Very light density. When washed, leaves yellow stains on fabric. Looks just like the stain from cigarette smoke. (When sprayed on white paper it makes it look just like parchment). This light shade works well as a highlight when used with the other darker brown colours. Usage Instructions: Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather. Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.    

Read more less

Khaki ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty green/brown colour. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly. Khaki – green/brown colour. More dense, harder to wash. When washed, leaves yellow/green stains on fabric. Excellent for shading and blending with other brown and yellowish sprays. Usage Instructions: Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather. Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.

Read more less

Low profile, light weight and extremely durable. The Pro-Pocket 2.0 has a unique layout design which enables it to hold a professional’s must-have tools and necessities with minimal bulk. Increased durability with 1200 denier nylon polyester (previously 600). Wider phone pocket, 10cm(h) x 7.5cm(w) x 2cm(d) now fits most larger smart phones. 1 x Side mounted D-rings 1 x Detachable 26cm accessory loop Single-handed tool access Low profile, unobtrusive design Easy on/off belt flap (allowing independent removal from belt) Integrated accessory loop with snap hook included 1 x internal tool pocket: 10cm(h) x 3cm(w) x 2.5cm(d) 1 x open-bottomed tool pocket (2.5cm diameter) 1 x open-bottomed tool pocket (3cm diameter) 1 x open-bottomed tool pocket (2cm diameter) 1 x open-bottomed pen pocket 1 x side-mounted podger pocket (2cm diameter) Hook & loop closure flap Overall pouch size 20cm(h) x 14cm (w) x 4.5cm (d) – Main structure only (excludes snap hook and accessory loop) Tool bag contents not included. Measurements are approximate. Ensure tools remain securely held in place at all times. If using this item while working at height you should ensure tools are adequately secured and could not become a ‘falling object’ hazard.

Read more less

14 tools in one hand. So simple yet it’s indispensable. Cut from 4mm hardened steel it’s one of the toughest multi-tools of its kind on the market. 14 separate tools remain instantly available, with every one designed around some of the most common needs in the professional rigging industry. Finished in a durable matt black powder coat and if you were ever in doubt, it has got a bottle opener too. 3/8″, 1/2″, 3/4″ nut tools 7mm (M6) square nut tool 18mm (M10), 20mm (M12), 24mm (M14) nut tools 4mm and 6mm eyelets Wire Stripper (x2) Wingnut tool Barndoor tool Bottle opener

Read more less

Standard A4 sized sheets.

Read more less

The 16x9 Inc. CineLock is a convenient quick-release mounting device designed to work with all Noga Articulating Arms. INGENIOUS DESIGN16x9 Inc.'s Cine Lock enables fast and easy non-thread mounting and removal of the arm and its cargo through an ingenious dove tail design. The device is made up of two parts, a male and female wedge/dove tail plate. The male plate is fitted onto the top and bottom of a Noga articulating arm. The female piece is attached both to the surface where the arm will be anchored, and onto whatever object the arm will hold. Once all pieces of the device are in place, the arm can easily be mounted onto a camera handle or tripod, for example — and a monitor or light can easily be mounted onto the arm itself. SIMPLE & EASY TO USEBy sliding the dove-tail to the wedge plates, the unit is locked into place. Simple and easy to use, the Cine Link speeds up camera set ups and break downs on set by eliminating laborious and time consuming threading. The system mounts quickly and effortlessly onto virtually all 1/4" - 20 and 3/8" threaded female threaded surfaces. Includes: Male Mount Female Receiver 1/4"-20 Screw 1/4"-20 Socket Set Screw 3/8" Socket Set Screw Washer  Features: Lightweight Secure Mount Rugged Construction Allows for Fast Mounting/Removal Mounts onto virtually all 1/4" & 3/8" threaded female surfaces Weight:51g (1.8 oz)    cine lock, cineloc, cine loc

Read more less

Foamclene is a non-flammable and anti-static multi-surface foam cleaner. A powerful formulation that lifts grease and dirt from general external surfaces to leave a fresh result. Spray directly onto surface and remove with an AF cleaning cloth for best results. Do not use on any type of screen including TFT, LCD, Smart TVs or screen filters. This product is not suitable for polished wood. Avoid electrical contactsKeypoints: Non flammable anti static pleasant fragrance

Read more less

Shurtape Console Tape is a premium paper tape that is printable and removes cleanly. Is ideal for use on sound and lighting boards. Easily tearable by hand this tape also leaves minimal to no residue when peeling off and can be used for writing on without any fuss. Features: Can write on it. Low/No Residue Tearable by hand Flexible Resistant to water, oil, and solvents Provides excellent adhesion Meets LHAMA requirements for use in arts and crafts

Read more less

These mini rolls come on a small core and are the perfect pocket size. This super high quality Matt Non Reflective Gaffer tape comes with 100% cotton cloth content (120 mesh) and 100% natural rubber adhesive, with zero release coating. This makes the product our most environmentally conscious gaffer tape to date. Most inks used are plant based and ethically sourced. 100% natural cotton cloth 100% natural rubber adhesive Plant based dyes FSC approved packaging No harmful chemicals used in making this product Reduces your carbon footprint This product adheres to any clean, dry surface and removes residue free. It’s ‘write on’ absorbent surface is ideal for the TV, film and entertainment business. With this bundle, you will receive a Fluorescent Yellow, Fluorescent Pink, Fluorescent Green, and Fluorescent Orange mini tape. Each roll is 5m long.

Read more less