The LNK is a patent pending quick-release connector composed of two identical halves. Designed and machined with minimal tolerances, every LNK is hand assembled, adjusted and inspected to ensure smooth connectivity, operation and a solid fit.
Two Identical HalvesThe LNK solves a common problem that standard film industry connectors struggle with: male and female "gendered" halves.
Need three female connectors on your camera to provide options for the position of the operator's monitor but only one male for the monitor's Noga arm? With standard connectors, you would need to purchase three sets to provide the needed three female halves, while the two unused male halves get lost in an AKS at the back of the truck.
With the LNK you would only need two sets. Three of the halves go on the camera body and the remaining LNK on the Noga. Connect any LNK to any LNK.
All the versatility you needEach half of the LNK system offers a through-hole and threaded-hole for both 3/8-16 and 1/4-20 with the hardware provided. Ever try to attach a transmitter with a threaded-hole to a monitor that only has threaded-holes? Industry standard connectors struggle with that. Since LNKs have through-holes, connecting two threaded-holes is a cinch.
Every kit also comes with two 3/8 to 1/4-20 step-downs giving each LNK all the versatility required for use on set.
Many anti-twist optionsTwisting quick releases have long been a problem of standard film industry connectors. However, the LNK comes with three native anti-twist solutions.
The 8-32 hole directly next to the 3/8 tapped hole of the LNK is for the included 8-32 set screws. This system is ideal for use with Noga arms where they can be tightened after threading the LNK onto the threaded noga to bind and lock the LNK into place.
The two small threaded holes flanking the large through-hole are for the included M1.6 screws. The small holes are set at ARRI anti-twist spacing and the 3mm heads of the screws acts as removable anti-twist pins.
The 3/8 threaded hole on the LNK is flanked by two female ARRI anti-twist holes for use with male anti-twist accessories. The SHD-AT SmallHD Anti-twist is sold separately.
The LNK Quick-Release Kit includes:
2x LNK identical halves
2x 3/8-16 low-profile camera screw
2x 1/4-20 low-profile camera screw
2x 3/8 to 1/4-20 adapter
2x 8-32 anti-twist set screw
4x M1.6 screws for ARRI anti-twist
Weight:
Per pair without screws/hardware: 33g
Dimensions:
Length: 44mm
Width including button: 26.5mm
Width not including button: 22mm
Height of half: 13mm
Height of pair: 19mm
Material:
Nickel plated machined aluminum
The LNKcine SHD-AT is a SmallHD anti-twist step-down for the LNK. It uses the ARRI anti-twist spacing M1.6 threads on the underside of the LNK to affix the SHD-AT and LNK together.
The SHD-AT is fully compatible with old pattern LNKs (2 ARRI anti-twist spaced threads on the underside) and new pattern LNKs (4 ARRI anti-twist spaced threads on the underside). Old and new pattern LNKs can utilise the SHD-AT with both 90° and 180° pin orientation.
Includes:
1x SHD-AT Anti-twist Attachment
1x 1/4-20 low-profile camera screw
2x M1.6 screws for mounting
Weight:
Per SHD-AT without screws/hardware: 2g
Dimensions:
Diameter: 21mm
Total height including pins: 4.5mm
Pin height: 2mm
Material:
Black anodised aluminium