The BST-BNC 5 is a Boot for use with the rear twist BNC 75R connectors.

Read more less

The BST-BNC 4 is a Boot for use with the rear twist BNC 75R connectors.

Read more less

The BST-BNC 2 is a Boot for use with the rear twist BNC 75R connectors.

Read more less

Save money and lower your carbon footprint with Varta’s Accu rechargeable AAA batteries. These high-quality NiMH cells are economical, eco-friendly and are an excellent choice for high-demand applications like cameras and photo strobes. State-of-the-art NiMH technology delivers a battery with the highest possible capacity in a pre-charged cell. These rechargeable batteries also have a very low self-discharge rate, enabling them to retain up to 70% of their charge after 2 full years in storage. Unlike NiCd batteries, these cells don’t exhibit memory effects, so you can recharge them at any stage. No special charger is required; any standard NiMH charger will work. This economical pack contains 4 rechargeable AAA batteries.

Read more less

Pack of 140 presaturated wipes These IPA 70/30 wipes are ideal for cleaning electronics, grease and getting rid of any adhesive residue. Comes in a resealable bag Easy to use on plastics without causing damage  

Read more less

4 Pack of heavy duty straps for securing large object such as lighting, curtains, rods, power or speaker cables on set. FEATURES: Manufactured using Stainless Steel, Polypropylene webbing and Nylon Hook and Loop High load bearing capacity: up to 25 lb. Keeps large, cumbersome cables neat and tidy, Helping to avoid falls or entanglement on set. Size: 1.0 x 7.25 x 0.3" Weight and Dimensions: FHDCS-5S: 25mm x 184mm x 8mm (1" x 7.25" x 0.3") (8.3g x 5) Diameter: 1.6"/41mm

Read more less

URSA MiniMounts are a slim, low-profile mount designed to be rigged where larger mounts cannot go. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. This MiniMount is deigned to fit the Sennheiser MKE1 MiniMounts are are available in four colours. Black, Brown, Beige, White. There are seven models available, They are designed specifically for the Deity W.Lav Pro, DPA 4060, 4071, 6060, 4660HD, RODE LAV/LAVii, Sanken COS11, Sennheiser MKE1 & MKE2, ME2, Shure Twinplex and Sony ECM-V1. More About URSA MiniMounts Easy to rig beside buttons on shirts where larger mounts will not fit! Their thin shape makes them perfect mounts for rigging on the skin in the cleavage or onto the bra. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. MiniMounts are moulded from hardened plastic. They won t snap under pressure or deform under heat. Each MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11 x 22mm and are designed specifically for MiniMounts. Our MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 11m wide x 22mm long x 6mm tall. Our 6060 & MKE1 measure 9.5m wide, 20mm long x 5mm tall. The DPA 4060 model also fits a CountryMan B3 with a Cap. The MKE1 model also fits a Countryman B6. The MKE1 & MKE2 models are designed to be used WITHOUT caps on the mics. This allows the mount to be as small as possible. Made for: Sennheiser MKE1 Dimension: 20 x 9.5 x 5mm Notes: Use without a cap. Works with: Countryman B6, Deity W.Lav Micro

Read more less

The URSA MiniMounts are a slim, low-profile mount designed to be rigged where larger mounts cannot go. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. This MiniMount is deigned to fit the DPA 4071. MiniMounts are are available in four colours. Black, Brown, Beige, White. There are seven models available, They are designed specifically for the Deity W.Lav Pro, DPA 4060, 4071, 6060, 4660HD, RODE LAV/LAVii, Sanken COS11, Sennheiser MKE1 & MKE2, ME2, Shure Twinplex and Sony ECM-V1. More About URSA MiniMounts Easy to rig beside buttons on shirts where larger mounts will not fit! Their thin shape makes them perfect mounts for rigging on the skin in the cleavage or onto the bra. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. MiniMounts are moulded from hardened plastic. They won t snap under pressure or deform under heat. Each MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11 x 22mm and are designed specifically for MiniMounts. Our MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 11m wide x 22mm long x 6mm tall. Our 6060 & MKE1 measure 9.5m wide, 20mm long x 5mm tall. The DPA 4060 model also fits a CountryMan B3 with a Cap. The MKE1 model also fits a Countryman B6. The MKE1 & MKE2 models are designed to be used WITHOUT caps on the mics. This allows the mount to be as small as possible. Made for: DPA 4071 Dimension: 22 x 11 x 6mm

Read more less

The URSA Calf Strap measures 47cm. Has Gripper to keep it from slipping around the Calf & Ankle. URSA Straps are 1mm thick, comfortable, low-profile straps. Using New Fabric Technology to create a unique bonded fabric which hook Velcro can grip to at any point. Calf Straps are available in: 3 Colours : Caramel, Beige or Black Big Pouch to suit all units. More About URSA Calf Straps Unique oval of Gripper is fitted inside the Pouch to keep the transmitter in place. Big Pouches measure 10cm tall x 8cm wide Strap measures: 47 x 10 cm Integrated cable pocket allow the mic cable to be looped and secured on the strap without the need for sticky tape. Colour Coded labels allow quick identification of strap size. URSA Straps are Machine Washable at 40 degrees Hang dry or Tumble dry at a low temperature. All their straps are manufactured by hand in the United Kingdom. URSA Straps use certified OEKO-TEX hypoallergenic fabric and gripper.

Read more less

The Windkiller SE (Special Edition) combines Bubblebees finest quality fur, design and manufacturing standards to effectively protect your portable recorder mic(s) against wind noise. On the outside, The Windkiller SE features a high-density, soft, multi-pile fur to gradually slow the wind down before reaching your mic. Inside, The Windkiller SE uses a soft and smooth, open material, allowing the mic to sound as transparent as possible, while protecting your recordings against harmful wind noises. The Windkiller SE can be affixed to the base of your portable recorders mic capsule(s) using an elasticated drawstring, while the leather band securely grips your portable/handheld recorder to keep the windshield in place and prevent wind from entering through the base. The Windkiller SE has been designed with an elasticated drawstring, encased in a soft leather band to securely grip your portable recorder to keep the windshield firmly in place and prevent wind from entering through the base. The base of The Windkiller SE should sit at the top of your recorder, allowing clear visibility of your recorders LCD display and accessibility to any controls or buttons on the side of your portable recorder. FEATURES Available in three sizes to fit the most widely available portable recorders on the market. Uses the much-loved, multi-pile fur for the ultimate protection against wind noise. Transparent inner fabric maintains a very natural frequency response. Includes an aerated mesh carry case. Manufactured in Denmark with quality and comfort in mind by sound lovers, for sound lovers. HOW TO FIT: Loosen the drawstring all the way and pull The Windkiller SE over the top part of the body of your portable recorder. Then tighten the drawstring to ensure the leather band is seated snugly around the body, below the built-in microphone diaphragm(s). When fitted correctly, The Windkiller SE holds a bubble of dead air around the mic capsule, allowing the microphone to function as naturally as possible and minimising wind interference in your recordings. SIZE GUIDE: XS - ∅ 32mm - 46mm (BBI-WKSE-PR-XS) M - ∅ 52mm - 65mm (BBI-WKSE-PR-M) L - ∅ 55mm - 71mm (BBI-WKSE-PR-L) Compatibility Chart

Read more less

THE ANSWER TO YOUR PRAYERS IN COMPACT WIND PROTECTION...  Made for your boom or camera microphone. Handles medium to mild wind. Made from the best imitation fur (high amount of hair pieces per cm2) which allows for optimal wind protection versus frequency transparency. Specially designed rubber base for super easy and secure mounting. When wet, simply dry it up and shake the fur back into a perfect shape.  Designed in Denmark by sound lovers, for sound lovers.  The Windkiller is a short-haired wind protector that fits shotgun microphones from Audio-Technica, Audix, DPA, JVC, Neumann, Røde, Sanken, Schoeps, Sennheiser, Sony and others. See Chart. The core of the Windkiller consists of high quality coarse foam with Bubblebee’s carefully chosen soft and fluffy imitation fur on top. This faux-fur is highly durable, works excellent to block the wind and is aesthetically pleasing for the eye. In the bottom, The Windkiller is constructed with our specially designed rubber mount that grips unto your microphone while still making it perfectly easy to slide the Windkiller on and off. The Windkiller comes in five different sizes, from XS to XL, all with an rubber opening in the bottom that fits shotgun microphones with a diameter of 18-24 mm (0.7”-0.9”). THE BIG MOUNT These come in XS and XL sizes with a rubber opening in the bottom that fits microphones with a wider diameter of 23-26 mm (0.9"-1,02"). There is 5 sizes and two big mount versions to cover all major variants of shotgun microphone: Big Mount:

Read more less

The Spacer Bubble, is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions. The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A short-haired fur cover is available separately if you need it. Each component of this Spacer Bubble is PMS colour 2035 (Red). The Spacer Bubble is available in red, black, green and blue. FEATURES: Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh' and wind. Specially designed rubber base for super easy and secure mounting. Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible. Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection. Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally. Available in seven different sizes - to ensure you find a size that perfectly fits your favourite shotgun mic. Save valuable time while getting the best quality. Practical mesh bag included for easy storage and fast mounting. Designed in Denmark by sound lovers, for sound lovers. The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom. The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds. When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready! The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you're working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency. WHAT’S INCLUDED: 1x The Spacer Bubble 1x The Long-Haired Spacer Cover 1x Mesh Storage Bag   WHICH SPACER BUBBLE SIZE?We offer five different lengths and two different mount sizes: Weight XS:Mesh base: 40g (1,4oz)Long-haired slip on fur: 20g (0,7oz) Full weight w/ packaging: 260g (9,1oz) Weight S:Mesh base: 50g (1,7oz)Long-haired slip on fur: 25g (0,8oz)Full weight w/ packaging: 275g (9,7oz)   Weight M:Mesh base: 55g (1,9oz) Long-haired slip on fur: 30g (1oz)Full weight w/ packaging: 290g (10,2oz) Weight L:Mesh base: 60g (2,1oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 300g (10,5oz) Weight XL:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging:305g (10,7oz) Big Mount: Weight XS Big Mount:Mesh base: 40g (1,4oz) Long-haired slip on fur: 20g (0,7oz)Full weight w/ packaging: 260g (9,1oz) Weight XL Big Mount:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 305g1 (0,7oz)

Read more less

The Spacer Bubble, is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions. The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A short-haired fur cover is available separately if you need it. Each component of this Spacer Bubble is PMS colour 354c (chroma green), the perfect tool to allow you to get your microphone closer to the sound source in green screen environments. The Spacer Bubble is available in red, black, green and blue. FEATURES: Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh' and wind. Specially designed rubber base for super easy and secure mounting. Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible. Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection. Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally. Available in seven different sizes - to ensure you find a size that perfectly fits your favourite shotgun mic. Save valuable time while getting the best quality. Practical mesh bag included for easy storage and fast mounting. Designed in Denmark by sound lovers, for sound lovers. The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom. The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds. When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready! The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you're working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency. WHAT’S INCLUDED: 1x The Spacer Bubble 1x The Long-Haired Spacer Cover 1x Mesh Storage Bag   WHICH SPACER BUBBLE SIZE?We offer five different lengths and two different mount sizes: Weight XS:Mesh base: 40g (1,4oz)Long-haired slip on fur: 20g (0,7oz) Full weight w/ packaging: 260g (9,1oz) Weight S:Mesh base: 50g (1,7oz)Long-haired slip on fur: 25g (0,8oz)Full weight w/ packaging: 275g (9,7oz)   Weight M:Mesh base: 55g (1,9oz) Long-haired slip on fur: 30g (1oz)Full weight w/ packaging: 290g (10,2oz) Weight L:Mesh base: 60g (2,1oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 300g (10,5oz) Weight XL:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging:305g (10,7oz) Big Mount: Weight XS Big Mount:Mesh base: 40g (1,4oz) Long-haired slip on fur: 20g (0,7oz)Full weight w/ packaging: 260g (9,1oz) Weight XL Big Mount:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 305g1 (0,7oz)

Read more less

The Spacer Bubble, is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions. The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A short-haired fur cover is available separately if you need it. Each component of this Spacer Bubble is PMS colour 2728c (chroma blue), the perfect tool to allow you to get your microphone closer to the sound source in blue screen environments. The Spacer Bubble is available in red, black, green and blue. FEATURES: Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh' and wind. Specially designed rubber base for super easy and secure mounting. Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible. Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection. Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally. Available in seven different sizes - to ensure you find a size that perfectly fits your favourite shotgun mic. Save valuable time while getting the best quality. Practical mesh bag included for easy storage and fast mounting. Designed in Denmark by sound lovers, for sound lovers. The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom. The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds. When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready! The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you're working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency. WHAT’S INCLUDED: 1x The Spacer Bubble 1x The Long-Haired Spacer Cover 1x Mesh Storage Bag   WHICH SPACER BUBBLE SIZE?We offer five different lengths and two different mount sizes: Weight XS:Mesh base: 40g (1,4oz)Long-haired slip on fur: 20g (0,7oz) Full weight w/ packaging: 260g (9,1oz) Weight S:Mesh base: 50g (1,7oz)Long-haired slip on fur: 25g (0,8oz)Full weight w/ packaging: 275g (9,7oz)   Weight M:Mesh base: 55g (1,9oz) Long-haired slip on fur: 30g (1oz)Full weight w/ packaging: 290g (10,2oz) Weight L:Mesh base: 60g (2,1oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 300g (10,5oz) Weight XL:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging:305g (10,7oz) Big Mount: Weight XS Big Mount:Mesh base: 40g (1,4oz) Long-haired slip on fur: 20g (0,7oz)Full weight w/ packaging: 260g (9,1oz) Weight XL Big Mount:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 305g1 (0,7oz)

Read more less

The Spacer Bubble, is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions. The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A short-haired fur cover is available separately if you need it. The Spacer Bubble is available in red, black, green and blue. FEATURES: Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh' and wind. Specially designed rubber base for super easy and secure mounting. Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible. Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection. Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally. Available in seven different sizes - to ensure you find a size that perfectly fits your favourite shotgun mic. Save valuable time while getting the best quality. Practical mesh bag included for easy storage and fast mounting. Designed in Denmark by sound lovers, for sound lovers. The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom. The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds. When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready! The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you're working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency. WHAT’S INCLUDED: 1x The Spacer Bubble 1x The Long-Haired Spacer Cover 1x Mesh Storage Bag   WHICH SPACER BUBBLE SIZE?We offer five different lengths and two different mount sizes: Weight XS:Mesh base: 40g (1,4oz)Long-haired slip on fur: 20g (0,7oz) Full weight w/ packaging: 260g (9,1oz) Weight S:Mesh base: 50g (1,7oz)Long-haired slip on fur: 25g (0,8oz)Full weight w/ packaging: 275g (9,7oz)   Weight M:Mesh base: 55g (1,9oz) Long-haired slip on fur: 30g (1oz)Full weight w/ packaging: 290g (10,2oz) Weight L:Mesh base: 60g (2,1oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 300g (10,5oz) Weight XL:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging:305g (10,7oz) Big Mount: Weight XS Big Mount:Mesh base: 40g (1,4oz) Long-haired slip on fur: 20g (0,7oz)Full weight w/ packaging: 260g (9,1oz) Weight XL Big Mount:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 305g1 (0,7oz)

Read more less

FOR ULTIMATE INVISIBILITY AND NOISE REDUCTION... The Invisible Lav Covers - Moleskin offers a low-profile option to easily mount and hide your lavalier microphones directly on the skin or on clothing, drastically reducing friction noise whilst maintaining a high level of frequency transparency. The Invisible Lav Covers - Moleskin is made from sustainably sourced bamboo, making it significantly quieter and more eco-friendly compared to alternatives. Each package of The Invisible Lav Covers Big Bag - Moleskin consists of 120 pieces of moleskin squares in one colour (choose from black/beige/white). FEATURES Optimal for use under clothing Provides you ultimate noise reduction when mounting your lavalier mics Available in black, beige or white Stick directly to the skin or clothing 120 pieces of super soft, sustainably sourced fabric made from bamboo fibers Low-profile, discreet design offers ultimate invisibility Comes in a useful reusable zip-lock storage pouch Designed in Denmark by Sound Lovers, for Sound Lovers Moleskin pieces can be used 1-2 times, so you will be able to do a minimum of 120 mounts per pack. Use their transparent, double-sided Invisible Lav Tape (sold separately) to keep your microphone and Invisible Lav Cover firmly in place whilst sticking directly to the skin or to clothing allowing the microphone to be safely and securely mounted almost anywhere. It’s all about being creative: under the collar, next to a buttonhole, or under the clothing in the chest area. Not sure which colour to use? The Invisible Lav Covers - Moleskin are also available in a smaller multipack, that also includes their Invisible Lav Tape. SPECIFICATIONS Each piece of moleskin measures 2.2 cm x 2.2 cm (0.86” x 0.86”) and comes in a handy reusable zip-lock storage pouch. Item codes: BBI-ILC-M-120BK/BE/WH Product warranty: This product is covered by their two-year warranty securing against defects in material, design and workmanship. The full-length warranty is available for download here. Also available: Invisible Lav Covers, Big Bag - Original: For ultimate transparency and invisibilityInvisible Lav Covers, Big Bag - Fur Outdoor: For ultimate wind protection and fabric noise reduction

Read more less

The Invisible Lav Covers - Fur Outdoor allow you to easily mount and hide your lavalier microphones directly on the skin or on clothing, whilst protecting your audio against clothing rustle. Each package of The Invisible Lav Covers Big Bag - Fur Outdoor consists of 40 pieces of fur squares, each reusable 3-4 times, for at least 120 mounts (choose from black/beige/white). Features: Optimal for use under clothing Provides you with ultimate transparency and invisibility when mounting your lavalier mics Available in black, beige or white Stick directly to the skin or clothing 40 pieces of reusable fur squares Each piece can be used 3-4 times, giving you at least 120 mounts per bag Comes in a useful reusable zip-lock storage pouch Designed in Denmark by Sound Lovers, for Sound Lovers While the fur can be used many times, you will be able to do a minimum of 120 mounts per pack. Use the transparent, double-sided Invisible Lav Tape (sold separately) to keep your microphone and Invisible Lav Cover firmly in place whilst sticking directly to the skin or to clothing allowing the microphone to be safely and securely mounted almost anywhere. It’s all about being creative: under the collar, next to a buttonhole, or under the clothing in the chest area. Not sure which colour to use? The Invisible Lav Covers - Fur Outdoor are also available in a smaller multipack, that also includes our, that also includes our Invisible Lav Tape

Read more less

THE CUB Build for the Sanken CUB-01 Mounts easily with elastic band Comes in black and in grey Designed in Denmark by sound lovers, for sound lovers A great microphone deserves great wind protection. That is why we developed and designed The Cub to fit just one microphone, the Sanken CUB-01. The Cub has a wide elastic area that allows it to easily slide over the flat construction of the CUB-01 microphone. The elastic is topped with a “hat” made from the carefully chosen faux-fur that is also used for our well-known Windbubbles. Each CUB comes in a practical metal box. Height: 3.5 cm (1.3”), Diameter: 5 cm (1,9”).

Read more less

THE SOLUTION FOR YOUR HANDHELD MIC IN HEAVY WINDS... • Fits all standard handheld microphones• For heavy wind• Stays in place on the microphone• Built with Imitation Fur• Reduces Wind Noise• Easy to Mount on Microphone• Designed in Denmark by sound lovers, for sound lovers The Big Windbubble provides some of the best wind protection for handheld microphones on the market. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside. So instead of the wind hammering on the microphone and making those horrible “ I’m in the middle of a hurricane”- sounds, it passes right through. The outside consists of carefully chosen black faux-fur that is soft, fluffy and even, and help make sure that you get the best possible results when recording outdoors.There is a smooth mesh lining underneath the fur and an elastic mount at the bottom, which makes it easy and secure to fit the Big Windbubble on all standard handheld microphones. Height: 10 cm (3.9”). Diameter: 5.2 cm (2.0”) Weight: 100g (incl. packaging) Long Haired Item code: BBI-BWB-BK Short Haired Item code: BBI-BWB-BKS

Read more less

Designed for use with Lavalier microphones worn on the outside of clothing, the Lavalier Windjammer (or Furry) is the most heavy-duty of Rycote's subminiature Lavalier microphone products. It is suitable for use in windy outdoor interview conditions and greatly reduces microphone noise and clothes rustle, while also providing effective wind protection. Features: High-level protection against wind noise for lavalier mics in the open air Reduces lavalier microphone noise and clothes rustle The Lavalier Windjammer comes in a range of black, grey, and white as standard. Other colours are also available on request to allow you to select the right match for your chosen piece of clothing. Rycote Codes: Black Single: 065514 Grey Single: 065515 White Single: 065516 Black Pair: 065501 Grey Pair: 065502 White Pair: 065503

Read more less

Duracell Procell Constant 9V PP3 6LR61 PC1604 batteries are specifically designed to meet the demands of modern industrial and manufacturing environments. Each battery is crafted for devices requiring a consistent 9V power supply, ensuring operational continuity and reliability. The Procell Constant line stands out for its ability to deliver steady performance over extended periods, which is important in critical settings. These batteries are engineered for a long shelf life, which translates to less frequent replacements and better inventory control for businesses. Dependable Power: Reliable energy delivery for devices essential to business operations. Enhanced Longevity: Specially designed for a longer service life in industrial applications. Stable Operation: Maintains consistent output, even in varying environmental conditions. Professional Grade: Trusted by professionals for high-demand equipment and safety devices. The Duracell Procell Constant 9V PP3 6LR61 PC1604 batteries are each built to provide a high-quality power source for demanding applications. These batteries boast a specialized construction that ensures a stable 9V output, which is crucial for devices that require a consistent and uninterrupted power supply. They are particularly suited for professional use, Duracell Procell Constant 9V batteries are ideal for hospitals, schools, TV & Film production, sound and vision, safety & security companies. The Procell Constant series emphasizes durability and performance, which is reflected in the robust design of the 6LR61 PC1604 model. With a focus on providing sustainable performance, these Procell 9V batteries support the continuous operation of essential equipment, thereby contributing to the safety and efficiency of industrial environments. Their bulk packaging is convenient for facilities management, ensuring that a sufficient supply of high-quality batteries is always on hand.

Read more less