THE CUB Build for the Sanken CUB-01 Mounts easily with elastic band Comes in black and in grey Designed in Denmark by sound lovers, for sound lovers A great microphone deserves great wind protection. That is why we developed and designed The Cub to fit just one microphone, the Sanken CUB-01. The Cub has a wide elastic area that allows it to easily slide over the flat construction of the CUB-01 microphone. The elastic is topped with a “hat” made from the carefully chosen faux-fur that is also used for our well-known Windbubbles. Each CUB comes in a practical metal box. Height: 3.5 cm (1.3”), Diameter: 5 cm (1,9”).

Read more less

THE SOLUTION FOR YOUR HANDHELD MIC IN HEAVY WINDS... • Fits all standard handheld microphones• For heavy wind• Stays in place on the microphone• Built with Imitation Fur• Reduces Wind Noise• Easy to Mount on Microphone• Designed in Denmark by sound lovers, for sound lovers The Big Windbubble provides some of the best wind protection for handheld microphones on the market. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside. So instead of the wind hammering on the microphone and making those horrible “ I’m in the middle of a hurricane”- sounds, it passes right through. The outside consists of carefully chosen black faux-fur that is soft, fluffy and even, and help make sure that you get the best possible results when recording outdoors.There is a smooth mesh lining underneath the fur and an elastic mount at the bottom, which makes it easy and secure to fit the Big Windbubble on all standard handheld microphones. Height: 10 cm (3.9”). Diameter: 5.2 cm (2.0”) Weight: 100g (incl. packaging) Long Haired Item code: BBI-BWB-BK Short Haired Item code: BBI-BWB-BKS

Read more less

Designed for use with Lavalier microphones worn on the outside of clothing, the Lavalier Windjammer (or Furry) is the most heavy-duty of Rycote's subminiature Lavalier microphone products. It is suitable for use in windy outdoor interview conditions and greatly reduces microphone noise and clothes rustle, while also providing effective wind protection. Features: High-level protection against wind noise for lavalier mics in the open air Reduces lavalier microphone noise and clothes rustle The Lavalier Windjammer comes in a range of black, grey, and white as standard. Other colours are also available on request to allow you to select the right match for your chosen piece of clothing. Rycote Codes: Black Single: 065514 Grey Single: 065515 White Single: 065516 Black Pair: 065501 Grey Pair: 065502 White Pair: 065503

Read more less

Filter Tabs are perfect for attaching to the side of your camera for quick and easy identification of what filter is currently fitted. Our filter tabs are made in house out of a acrylic laminate material to ensure they are robust and can endure life on set. This Set comes with: SFX 1/4 SFX 1/2 SFX 1 SFX 2 SFX 3 SFX 4 SFX 5 Supplied with the pack is a length of Hook material (Velcro) for applying to the Tabs. This is a build to order item - Please allow a working day for them to be produced. Individual Tabs or custom sets are also available, please contact us. Available in the following Colors: Black/White White/Black Red/White Blue/White White/Red White/Blue Yellow/Black If you require another colour please contact us.

Read more less

Filter Tabs are perfect for attaching to the side of your camera for quick and easy identification of what filter is currently fitted. Our filter tabs are made in house out of a acrylic laminate material to ensure they are robust and can endure life on set. This ND Grad set is covers both Soft Edge and Hard Edge. This Set comes with: S/E 0.3 S/E 0.6 S/E 0.9 S/E 1.2 H/E 0.3 H/E 0.6 H/E 0.9 H/E 1.2 Supplied with the pack is a length of Hook material (Velcro) for applying to the Tabs. This is a build to order item - Please allow a working day for them to be produced. Individual Tabs or custom sets are also available, please contact us. Available in the following Colours: Black/White White/Black Red/White Blue/White White/Red White/Blue Yellow/Black If you require another colour please contact us.

Read more less

Filter Tabs are perfect for attaching to the side of your camera for quick and easy identification of what filter is currently fitted. Our filter tabs are made in house out of a acrylic laminate material to ensure they are robust and can endure life on set. This Set comes with: 1/8 BPM 1/4 BPM 1/2 BPM 1 BPM 2 BPM Supplied with the pack is a length of Hook material (Velcro) for applying to the Tabs. This is a build to order item - Please allow a working day for them to be produced. Individual Tabs or custom sets are also available, please contact us. Available in the following Colours: Black/White White/Black Red/White Blue/White White/Red White/Blue Yellow/Black If you require another colour please contact us.

Read more less

Dymo (12mm) Plastic Tape for Dymo LetraTAG Series Supplied in fiddle-proof cassette system in low cost paper, colourful plastic or weatherproof metallic labels for a wide range of applications. Size: 12mm x 4m. Features: Supplied in fiddle-proof cassette system in low cost paper, colourful plastic or weatherproof metallic labels for a wide range of applications Size: 12mmx4m

Read more less

Concord (A4) Classic Lever Arch File Printed Lining Capacity 70mm. A range of paper over board lever arch files from Concord. Metal finger pull for easy shelf retrieval. Spine label for easy identification. Reinforced edge for extra stability. Printed lining incorporating useful index panel. Features A new range of paper over board lever arch files from Concord Metal finger pull for easy shelf retrieval Spine label for easy identification Reinforced edge for extra stability Printed lining incorporating useful index panel 70mm spine Size: A4

Read more less

Compatible with a wide range of Brother's P-touch printers. Genuine laminated TZe labelling tape cassette. 9mm wide, 8m long High quality genuine Brother cassette Ensure durable, easily readable results

Read more less

The Windkiller SE (Special Edition) uses Bubblebees finest imitation fur to effectively protect your DPA 4018G or 4018E mic against wind noise. The outer layer of The Windkiller SE for DPA 4018G features a high-density, soft, multi-pile fur to gradually slow the wind down before reaching your mic. Inside, The Windkiller SE uses a super soft and smooth, open material. This allows your mic to sound as transparent as possible, whilst protecting your recordings against harmful wind noises. The black elastic band and press stud keeps The Windkiller SE firmly attached to your mic, whilst seamlessly blending into the windshield to remain discreet. When fitted correctly, The Windkiller SE holds a bubble of dead air around the front of the mic capsule, allowing the microphone to function as naturally as possible and keeping wind interference at bay. FEATURES: Designed to fit the DPA 4018G and DPA 4018E low profile supercardioid microphones. Uses the much-loved, multi-pile fur for the ultimate protection against wind noise. Transparent inner fabric maintains a very natural frequency response, on or off-axis. Manufactured in Denmark with quality and comfort in mind by sound lovers, for sound lovers. WHAT’S INCLUDED: 1 x The Windkiller SE for DPA 4018G  

Read more less

The Windkiller SE (Special Edition) uses Bubblebees finest imitation fur to effectively protect your DPA 4097 or 4099 mic against wind noise. On the outside, The Windkiller SE for DPA 4097 features a high-density, soft, multi-pile fur to gradually slow the wind down before reaching your mic. Inside, The Windkiller SE uses a soft and smooth, open material. This allows your mic to sound as transparent as possible, whilst protecting your recordings against harmful wind noises. The black elastic tab and press stud keeps The Windkiller SE firmly attached to your microphone, whilst seamlessly blending into the windshield to remain discreet. When fitted correctly, The Windkiller SE holds a bubble of dead air around the front of the mic capsule, allowing the microphone to function as naturally as possible and keeping wind interference at bay. FEATURES: Designed to fit the DPA 4097 Micro Shotgun and DPA 4099 Instrument microphones. Uses the much-loved, multi-pile fur for the ultimate protection against wind noise. Transparent inner fabric maintains a very natural frequency response, on or off-axis. Manufactured in Denmark with quality and comfort in mind by sound lovers, for sound lovers.

Read more less

Exposure 18% Grey Balance for Photo and Video from Capture to Edit A portable A7-sized grey balance (18%) target Ideal for setting correct exposure for all types of users The ColorChecker Grey Balance Mini is the smaller version of the standard-sized grey balance card, measuring only 63.5 x 109.0mm. Using the ColorChecker Grey Balance Mini for reflective spot exposure metering will give you the confidence that your images will be exposed as accurately as possible. The ColorChecker Grey Balance Mini is a pocket-size version of the 18% grey reference square in the standard 24-patch ColorChecker. The grey is scientifically engineered to provide a precise uniform surface that is spectrally neutral, meaning it reflects equal amounts of red, blue and green in all types of light conditions. The ColorChecker Grey Balance target can be used for a variety of applications: Cinematography (Television and Video): Verify grey balance is produced through the configuration of cameras, lights and film. Digital Photography: Exposure metering and grey balance. Adjusts your digital camera’s colour sensitivity to exactly match the ambient lighting conditions Traditional Photography: Check films, lights, filters and paper. It’s portable enough to take wherever you go!

Read more less

These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Peli cases have survived. Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware. FEAURES:  Interior: 21.1 × 14.7 × 9.5 cm Pick N Pluck™ with convoluted lid foam Watertight, crushproof, and dustproof Open cell core with solid wall design - strong, light weight Automatic Pressure Equalization Valve - balances interior pressure, keeps water out O-ring seal

Read more less

This refill canister is for use with the Falcon Dust-Off Plus 360° Vector Valve. Specially created for hard to dust areas, the Dust-Off Plus was designed with an innovative 360° Vector Valve which allows the user to blast dust, dirt and lint out of even the most impossible to reach places. Provides amazing range and versatility Ideal for use on keyboards, photographic equipment, workstations etc. 100% ozone safe Contains bitterant to dissuade solvent abuse 300ml * Only for use with the Falcon Dust-Off Plus 360° Vector Valve (not included with this product)

Read more less

105x130mm Duplicate Book Ruled, 100 Sets Taped Card Cover Duplicate Book: Taped binding making the product stronger and durable Perforated: Top copy perforated for easy removal, bottom copy stays in book Carbonless: No carbon sheet required Quality 60GSM Paper

Read more less

The Regular Spares Set for The Lav Concealer contains 6 full sets of metalwork replacements for your regular 'square' format Lav Concealers; ie. Like the Lav Concealer for Cos-11, DPA 4060, 4071 or RØDE Lavalier, B3, MKE 2, W.Lav Pro, ECM-77 etc. A 'set' of metalwork consists of a Fabric Guard, Fabric Guard Extreme and a Clothing Clip. The Spares Set has 3 x silver sets (for white Lav Concealers) and 3 x black sets (for Black Lav Concealers), making 6 full sets in total.

Read more less

The Tiny Spares Set for The Lav Concealer contains 6 full sets of metalwork replacements for your tiny 'subminiature' format Lav Concealers; ie. Like the Lav Concealer for DPA 6060. MKE1, B6, W.Lav Micro A 'set' of metalwork consists of one big metal Fabric Guard, one small metal Fabric Guard and a metal Lock piece. The Spares Set has 3 x silver sets (for white Lav Concealers) and 3 x black sets (for Black Lav Concealers), making 6 sets (18pcs) in total.

Read more less

SPECIALLY DESIGNED DOUBLE-SIDED HYPOALLERGENIC TAPE FOR MOUNTING THE TINY Lav CONCEALERS TO CLOTHING OR DIRECTLY ON SKIN. The new tape features a small recessed area in the sticky tab, to prevent the build up of adhesive residue around your mics capsule. Similar in principle to existing Lav Concealer Tape, the new tiny version includes a handy thumb tab to help you affix the tape to the tiny Lav Concealers. The hypoallergenic tape itself is super sticky, allowing you to mount your tiny Lav Concealer on a number of different surfaces with the confidence that it will stay in place throughout your recording. To apply The Lav Concealer Tiny Tape, simply lift the tape from the backing tape using the thumb-tab. Then line up and press the glue-side firmly onto The Lav Concealer. Then, use the thumb-tab to remove the guard paper, leaving the double sided tape on the concealer. Fit directly to clothing, skin or other surfaces without worry! PERFECT FIT FOR: The Lav Concealer for DPA6060, Sennheiser MKE1, Countryman B6 and Deity W.Lav Micro.

Read more less

The Rycote Modular Windshield Kit includes: 1 x Connbox CB1 (XLR-3F) Product Code: 016901 1 x XLR Holder MK II Product Code: 048493 1 x Boom Poles Adaptor Product Code: 048402 1 x Pistol Grip Handle with Lever Product Code: 048401 1 x Windjammer WJ 4 Product Code: 021504 1 x Windshield WS 4 Product Code: 010604 1 x Suspension Medium (XLR-3F) 68 Duo Product Code: 040146 2x Duo-Lyre 68 (19/34) 2x Single Lyre 72 (19/25) Brush Hex head key The Modular Windshield Kit is the professionals' choice when maximum isolation from wind and handling noise is required. This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of wind shielding.  Model Number  RYC086007 WS7

Read more less

Really useful boxes are perfect for storing consumables, accessories and other equipment for transport to and from set. Additionally it can keep your camera truck organised. Additional Suggested uses: Tape  Stationery supplies Dimensions: External: 340 x 200 x 70 Internal: 290 x 160 x 50(length x width x depth in mm) Weight: 365g  

Read more less