The Windkiller SE (Special Edition) combines Bubblebees finest quality fur, design and manufacturing standards to effectively protect your portable recorder mic(s) against wind noise.
On the outside, The Windkiller SE features a high-density, soft, multi-pile fur to gradually slow the wind down before reaching your mic.
Inside, The Windkiller SE uses a soft and smooth, open material, allowing the mic to sound as transparent as possible, while protecting your recordings against harmful wind noises.
The Windkiller SE can be affixed to the base of your portable recorders mic capsule(s) using an elasticated drawstring, while the leather band securely grips your portable/handheld recorder to keep the windshield in place and prevent wind from entering through the base.
The Windkiller SE has been designed with an elasticated drawstring, encased in a soft leather band to securely grip your portable recorder to keep the windshield firmly in place and prevent wind from entering through the base. The base of The Windkiller SE should sit at the top of your recorder, allowing clear visibility of your recorders LCD display and accessibility to any controls or buttons on the side of your portable recorder.
FEATURES
Available in three sizes to fit the most widely available portable recorders on the market.
Uses the much-loved, multi-pile fur for the ultimate protection against wind noise.
Transparent inner fabric maintains a very natural frequency response.
Includes an aerated mesh carry case.
Manufactured in Denmark with quality and comfort in mind by sound lovers, for sound lovers.
HOW TO FIT:
Loosen the drawstring all the way and pull The Windkiller SE over the top part of the body of your portable recorder. Then tighten the drawstring to ensure the leather band is seated snugly around the body, below the built-in microphone diaphragm(s). When fitted correctly, The Windkiller SE holds a bubble of dead air around the mic capsule, allowing the microphone to function as naturally as possible and minimising wind interference in your recordings.
SIZE GUIDE:
XS - ∅ 32mm - 46mm (BBI-WKSE-PR-XS)
M - ∅ 52mm - 65mm (BBI-WKSE-PR-M)
L - ∅ 55mm - 71mm (BBI-WKSE-PR-L)
Compatibility Chart
The Spacer Bubble, is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions.
The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A short-haired fur cover is available separately if you need it.
Each component of this Spacer Bubble is PMS colour 2035 (Red).
The Spacer Bubble is available in red, black, green and blue.
FEATURES:
Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh' and wind.
Specially designed rubber base for super easy and secure mounting.
Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible.
Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection.
Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally.
Available in seven different sizes - to ensure you find a size that perfectly fits your favourite shotgun mic.
Save valuable time while getting the best quality.
Practical mesh bag included for easy storage and fast mounting.
Designed in Denmark by sound lovers, for sound lovers.
The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom.
The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds.
When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready!
The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you're working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency.
WHAT’S INCLUDED:
1x The Spacer Bubble
1x The Long-Haired Spacer Cover
1x Mesh Storage Bag
WHICH SPACER BUBBLE SIZE?We offer five different lengths and two different mount sizes:
Weight XS:Mesh base: 40g (1,4oz)Long-haired slip on fur: 20g (0,7oz) Full weight w/ packaging: 260g (9,1oz)
Weight S:Mesh base: 50g (1,7oz)Long-haired slip on fur: 25g (0,8oz)Full weight w/ packaging: 275g (9,7oz)
Weight M:Mesh base: 55g (1,9oz) Long-haired slip on fur: 30g (1oz)Full weight w/ packaging: 290g (10,2oz)
Weight L:Mesh base: 60g (2,1oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 300g (10,5oz)
Weight XL:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging:305g (10,7oz)
Big Mount:
Weight XS Big Mount:Mesh base: 40g (1,4oz) Long-haired slip on fur: 20g (0,7oz)Full weight w/ packaging: 260g (9,1oz)
Weight XL Big Mount:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 305g1 (0,7oz)
The Spacer Bubble, is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions.
The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A short-haired fur cover is available separately if you need it.
Each component of this Spacer Bubble is PMS colour 354c (chroma green), the perfect tool to allow you to get your microphone closer to the sound source in green screen environments.
The Spacer Bubble is available in red, black, green and blue.
FEATURES:
Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh' and wind.
Specially designed rubber base for super easy and secure mounting.
Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible.
Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection.
Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally.
Available in seven different sizes - to ensure you find a size that perfectly fits your favourite shotgun mic.
Save valuable time while getting the best quality.
Practical mesh bag included for easy storage and fast mounting.
Designed in Denmark by sound lovers, for sound lovers.
The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom.
The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds.
When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready!
The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you're working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency.
WHAT’S INCLUDED:
1x The Spacer Bubble
1x The Long-Haired Spacer Cover
1x Mesh Storage Bag
WHICH SPACER BUBBLE SIZE?We offer five different lengths and two different mount sizes:
Weight XS:Mesh base: 40g (1,4oz)Long-haired slip on fur: 20g (0,7oz) Full weight w/ packaging: 260g (9,1oz)
Weight S:Mesh base: 50g (1,7oz)Long-haired slip on fur: 25g (0,8oz)Full weight w/ packaging: 275g (9,7oz)
Weight M:Mesh base: 55g (1,9oz) Long-haired slip on fur: 30g (1oz)Full weight w/ packaging: 290g (10,2oz)
Weight L:Mesh base: 60g (2,1oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 300g (10,5oz)
Weight XL:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging:305g (10,7oz)
Big Mount:
Weight XS Big Mount:Mesh base: 40g (1,4oz) Long-haired slip on fur: 20g (0,7oz)Full weight w/ packaging: 260g (9,1oz)
Weight XL Big Mount:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 305g1 (0,7oz)
The Spacer Bubble, is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions.
The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A short-haired fur cover is available separately if you need it.
Each component of this Spacer Bubble is PMS colour 2728c (chroma blue), the perfect tool to allow you to get your microphone closer to the sound source in blue screen environments.
The Spacer Bubble is available in red, black, green and blue.
FEATURES:
Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh' and wind.
Specially designed rubber base for super easy and secure mounting.
Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible.
Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection.
Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally.
Available in seven different sizes - to ensure you find a size that perfectly fits your favourite shotgun mic.
Save valuable time while getting the best quality.
Practical mesh bag included for easy storage and fast mounting.
Designed in Denmark by sound lovers, for sound lovers.
The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom.
The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds.
When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready!
The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you're working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency.
WHAT’S INCLUDED:
1x The Spacer Bubble
1x The Long-Haired Spacer Cover
1x Mesh Storage Bag
WHICH SPACER BUBBLE SIZE?We offer five different lengths and two different mount sizes:
Weight XS:Mesh base: 40g (1,4oz)Long-haired slip on fur: 20g (0,7oz) Full weight w/ packaging: 260g (9,1oz)
Weight S:Mesh base: 50g (1,7oz)Long-haired slip on fur: 25g (0,8oz)Full weight w/ packaging: 275g (9,7oz)
Weight M:Mesh base: 55g (1,9oz) Long-haired slip on fur: 30g (1oz)Full weight w/ packaging: 290g (10,2oz)
Weight L:Mesh base: 60g (2,1oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 300g (10,5oz)
Weight XL:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging:305g (10,7oz)
Big Mount:
Weight XS Big Mount:Mesh base: 40g (1,4oz) Long-haired slip on fur: 20g (0,7oz)Full weight w/ packaging: 260g (9,1oz)
Weight XL Big Mount:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 305g1 (0,7oz)
FOR ULTIMATE INVISIBILITY AND NOISE REDUCTION...
The Invisible Lav Covers - Moleskin offers a low-profile option to easily mount and hide your lavalier microphones directly on the skin or on clothing, drastically reducing friction noise whilst maintaining a high level of frequency transparency.
The Invisible Lav Covers - Moleskin is made from sustainably sourced bamboo, making it significantly quieter and more eco-friendly compared to alternatives.
Each package of The Invisible Lav Covers Big Bag - Moleskin consists of 120 pieces of moleskin squares in one colour (choose from black/beige/white).
FEATURES
Optimal for use under clothing
Provides you ultimate noise reduction when mounting your lavalier mics
Available in black, beige or white
Stick directly to the skin or clothing
120 pieces of super soft, sustainably sourced fabric made from bamboo fibers
Low-profile, discreet design offers ultimate invisibility
Comes in a useful reusable zip-lock storage pouch
Designed in Denmark by Sound Lovers, for Sound Lovers
Moleskin pieces can be used 1-2 times, so you will be able to do a minimum of 120 mounts per pack.
Use their transparent, double-sided Invisible Lav Tape (sold separately) to keep your microphone and Invisible Lav Cover firmly in place whilst sticking directly to the skin or to clothing allowing the microphone to be safely and securely mounted almost anywhere. It’s all about being creative: under the collar, next to a buttonhole, or under the clothing in the chest area.
Not sure which colour to use? The Invisible Lav Covers - Moleskin are also available in a smaller multipack, that also includes their Invisible Lav Tape.
SPECIFICATIONS
Each piece of moleskin measures 2.2 cm x 2.2 cm (0.86” x 0.86”) and comes in a handy reusable zip-lock storage pouch.
Item codes: BBI-ILC-M-120BK/BE/WH
Product warranty: This product is covered by their two-year warranty securing against defects in material, design and workmanship. The full-length warranty is available for download here.
Also available:
Invisible Lav Covers, Big Bag - Original: For ultimate transparency and invisibilityInvisible Lav Covers, Big Bag - Fur Outdoor: For ultimate wind protection and fabric noise reduction
THE CUB
Build for the Sanken CUB-01
Mounts easily with elastic band
Comes in black and in grey
Designed in Denmark by sound lovers, for sound lovers
A great microphone deserves great wind protection. That is why we developed and designed The Cub to fit just one microphone, the Sanken CUB-01.
The Cub has a wide elastic area that allows it to easily slide over the flat construction of the CUB-01 microphone. The elastic is topped with a “hat” made from the carefully chosen faux-fur that is also used for our well-known Windbubbles.
Each CUB comes in a practical metal box.
Height: 3.5 cm (1.3”), Diameter: 5 cm (1,9”).
THE SOLUTION FOR YOUR HANDHELD MIC IN HEAVY WINDS...
• Fits all standard handheld microphones• For heavy wind• Stays in place on the microphone• Built with Imitation Fur• Reduces Wind Noise• Easy to Mount on Microphone• Designed in Denmark by sound lovers, for sound lovers
The Big Windbubble provides some of the best wind protection for handheld microphones on the market.
The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside. So instead of the wind hammering on the microphone and making those horrible “ I’m in the middle of a hurricane”- sounds, it passes right through.
The outside consists of carefully chosen black faux-fur that is soft, fluffy and even, and help make sure that you get the best possible results when recording outdoors.There is a smooth mesh lining underneath the fur and an elastic mount at the bottom, which makes it easy and secure to fit the Big Windbubble on all standard handheld microphones.
Height: 10 cm (3.9”). Diameter: 5.2 cm (2.0”) Weight: 100g (incl. packaging)
Long Haired Item code: BBI-BWB-BK
Short Haired Item code: BBI-BWB-BKS
Suitable for Lavalier mics of 2.8 mm in diameter and up to 15 mm length
The Lavalier Foam is a discreet, slip-on foam windshield, designed to protect personal microphones against light wind and pop noise. Made of durable, high quality open-cell acoustic foam, Lavalier Foam windshields offer up to 20dB of pop and wind noise attenuation, whilst avoiding concurrent high frequency loss. Engineered exclusively for Rycote, this high quality foam also provides excellent resistance against the damaging effects of moisture and UV light. An effective, low profile windshield solution for personal microphones, the Lavalier Foam is available in a range of Black, Beige and Brown colours.Additionally, you can now also benefit from a further 12dB of wind noise attenuation with Rycote's Lavalier Windjammer™ (Furry). Specifically designed for windier conditions, the Lavalier Windjammer™ fits on top of the Lavalier Foam and comes in a range of black, grey, and white as standard. These are sold seperatly. Other colours are also available on request to allow you to select the right match for your chosen piece of clothing.
Main Benefits:
Up to 20 dB wind and pop noise attenuation with minimal high-frequency loss from this slip-on foam windshield.
Excellent resistance to moisture and UV light from the durable, high quality open-cell acoustic foam.
Minature available in Black only.
Rycote Codes:
Pack of 2: 105504
Pack of 10: 105514
Designed for use with Lavalier microphones worn on the outside of clothing, the Lavalier Windjammer (or Furry) is the most heavy-duty of Rycote's subminiature Lavalier microphone products.
It is suitable for use in windy outdoor interview conditions and greatly reduces microphone noise and clothes rustle, while also providing effective wind protection.
Features:
High-level protection against wind noise for lavalier mics in the open air
Reduces lavalier microphone noise and clothes rustle
The Lavalier Windjammer comes in a range of black, grey, and white as standard.
Other colours are also available on request to allow you to select the right match for your chosen piece of clothing.
Rycote Codes:
Black Single: 065514
Grey Single: 065515
White Single: 065516
Black Pair: 065501
Grey Pair: 065502
White Pair: 065503
Filter Tabs are perfect for attaching to the side of your camera for quick and easy identification of what filter is currently fitted.
Our filter tabs are made in house out of a acrylic laminate material to ensure they are robust and can endure life on set.
This Set comes with:
SFX 1/4
SFX 1/2
SFX 1
SFX 2
SFX 3
SFX 4
SFX 5
Supplied with the pack is a length of Hook material (Velcro) for applying to the Tabs.
This is a build to order item - Please allow a working day for them to be produced.
Individual Tabs or custom sets are also available, please contact us.
Available in the following Colors:
Black/White
White/Black
Red/White
Blue/White
White/Red
White/Blue
Yellow/Black
If you require another colour please contact us.
Filter Tabs are perfect for attaching to the side of your camera for quick and easy identification of what filter is currently fitted.
Our filter tabs are made in house out of a acrylic laminate material to ensure they are robust and can endure life on set.
This ND Grad set is covers both Soft Edge and Hard Edge.
This Set comes with:
S/E 0.3
S/E 0.6
S/E 0.9
S/E 1.2
H/E 0.3
H/E 0.6
H/E 0.9
H/E 1.2
Supplied with the pack is a length of Hook material (Velcro) for applying to the Tabs.
This is a build to order item - Please allow a working day for them to be produced.
Individual Tabs or custom sets are also available, please contact us.
Available in the following Colours:
Black/White
White/Black
Red/White
Blue/White
White/Red
White/Blue
Yellow/Black
If you require another colour please contact us.
Dymo (12mm) Plastic Tape for Dymo LetraTAG Series
Supplied in fiddle-proof cassette system in low cost paper, colourful plastic or weatherproof metallic labels for a wide range of applications. Size: 12mm x 4m.
Features:
Supplied in fiddle-proof cassette system in low cost paper, colourful plastic or weatherproof metallic labels for a wide range of applications
Size: 12mmx4m
Concord (A4) Classic Lever Arch File Printed Lining Capacity 70mm.
A range of paper over board lever arch files from Concord. Metal finger pull for easy shelf retrieval. Spine label for easy identification. Reinforced edge for extra stability. Printed lining incorporating useful index panel.
Features
A new range of paper over board lever arch files from Concord
Metal finger pull for easy shelf retrieval
Spine label for easy identification
Reinforced edge for extra stability
Printed lining incorporating useful index panel
70mm spine
Size: A4
Exposure 18% Grey Balance for Photo and Video from Capture to Edit
A portable A7-sized grey balance (18%) target
Ideal for setting correct exposure for all types of users
The ColorChecker Grey Balance Mini is the smaller version of the standard-sized grey balance card, measuring only 63.5 x 109.0mm.
Using the ColorChecker Grey Balance Mini for reflective spot exposure metering will give you the confidence that your images will be exposed as accurately as possible. The ColorChecker Grey Balance Mini is a pocket-size version of the 18% grey reference square in the standard 24-patch ColorChecker. The grey is scientifically engineered to provide a precise uniform surface that is spectrally neutral, meaning it reflects equal amounts of red, blue and green in all types of light conditions.
The ColorChecker Grey Balance target can be used for a variety of applications:
Cinematography (Television and Video): Verify grey balance is produced through the configuration of cameras, lights and film.
Digital Photography: Exposure metering and grey balance. Adjusts your digital camera’s colour sensitivity to exactly match the ambient lighting conditions
Traditional Photography: Check films, lights, filters and paper.
It’s portable enough to take wherever you go!
105x130mm Duplicate Book Ruled, 100 Sets
Taped Card Cover Duplicate Book: Taped binding making the product stronger and durable
Perforated: Top copy perforated for easy removal, bottom copy stays in book
Carbonless: No carbon sheet required
Quality 60GSM Paper
The Regular Spares Set for The Lav Concealer contains 6 full sets of metalwork replacements for your regular 'square' format Lav Concealers; ie. Like the Lav Concealer for Cos-11, DPA 4060, 4071 or RØDE Lavalier, B3, MKE 2, W.Lav Pro, ECM-77 etc.
A 'set' of metalwork consists of a Fabric Guard, Fabric Guard Extreme and a Clothing Clip. The Spares Set has 3 x silver sets (for white Lav Concealers) and 3 x black sets (for Black Lav Concealers), making 6 full sets in total.
The Tiny Spares Set for The Lav Concealer contains 6 full sets of metalwork replacements for your tiny 'subminiature' format Lav Concealers; ie. Like the Lav Concealer for DPA 6060. MKE1, B6, W.Lav Micro
A 'set' of metalwork consists of one big metal Fabric Guard, one small metal Fabric Guard and a metal Lock piece.
The Spares Set has 3 x silver sets (for white Lav Concealers) and 3 x black sets (for Black Lav Concealers), making 6 sets (18pcs) in total.
The Rycote Modular Windshield Kit includes:
1 x Connbox CB1 (XLR-3F) Product Code: 016901
1 x XLR Holder MK II Product Code: 048493
1 x Boom Poles Adaptor Product Code: 048402
1 x Pistol Grip Handle with Lever Product Code: 048401
1 x Windjammer WJ 4 Product Code: 021504
1 x Windshield WS 4 Product Code: 010604
1 x Suspension Medium (XLR-3F) 68 Duo Product Code: 040146
2x Duo-Lyre 68 (19/34)
2x Single Lyre 72 (19/25)
Brush
Hex head key
The Modular Windshield Kit is the professionals' choice when maximum isolation from wind and handling noise is required. This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of wind shielding.
Model Number
RYC086007
WS7
Really useful boxes are perfect for storing consumables, accessories and other equipment for transport to and from set. Additionally it can keep your camera truck organised.
Additional Suggested uses:
Tape
Stationery supplies
Dimensions:
External: 340 x 200 x 70
Internal: 290 x 160 x 50(length x width x depth in mm)
Weight: 365g
Every tool on the ultra-useful Charge Plus makes it adventure-worthy. The scissors slice through anything, the wire cutters are made in a durable material and are replaceable, and the knife blade is made in a strong, corrosion-resistant 154CM steel. Need an extra hand? No problem. Every tool can be opened and locked with just one hand.
SPECIFICATIONS:
Product Type:
Multi-Tool
Colour:
Black
Sheath:
Black MOLLE
Primary Blade Length:
2.9 in | 7.37 cm
Closed Length:
4 in | 10 cm
Weight:
8.3 oz | 235 g
19 TOOLS INCLUDE:
Needlenose Pliers
Perfect for holding small objects or using the pliers in tight, narrow spaces.
Regular Pliers
Conveniently hold and manipulate items.
Premium Replaceable Wire Cutters
Easily cut through regular and light-gauge wire with this replaceable, edge-retaining tool.
Premium Replaceable Hard-wire Cutters
Easily cut through electrical hard wires with this replaceable, edge-retaining tool.
Electrical Crimper
Found in the jaw of the tool and used for general purpose crimping of electrical connectors.
Wire Stripper
Safely strip multiple gauges and types of wire.
154CM Knife
This blade’s high-end, super strong steel stays sharp longer and resists rust.
420HC Serrated Knife
A toothed blade crafted from 420HC stainless steel. Serrations grab and cut materials easily, making this style of blade exceptionally useful for cutting through rope or fibre.
Saw
Quickly and easily saw through tough materials with this open-toothed tool.
Spring-action Scissors
Use one hand to quickly and easily cut through thin materials.
Cutting Hook
Safely cut tape, cord, seatbelts, and other materials.
Ruler (8 in | 19 cm)
A precise measuring guide for determining length in inches or centimetres, up to 8 inches or 19 centimetres.
Can Opener
Safely and easily open canned goods in wilderness situations.
Bottle Opener
A tool that allows the user to pop the top on a favourite beverage.
Wood/Metal File
Precisely file and smooth edges on wood and metal surfaces.
Diamond-coated File
Precisely sharpen hard steel blades.
Large Bit Driver
Easily switch out full-size bits to customize your multi-tool.
Small Bit Driver
Easily switch out small double-sided bits to customize your multi-tool.
Medium Screwdriver
Tighten and loosen medium-size flathead screws.
FEATURES:
All Locking Features
All locking features means that every tool and knife on the body of the handle, with the exception of the plier head, will lock into place. Note that the Crunch; however, does feature both all locking tools and plier head. The all locking design enables the user to operate individual tools safely and effectively. By locking them into place when fully open, the user can put pressure on the implement while safely completing the job, before manually unlocking the tool to stow it away.
Lanyard Ring
This secure ring is for attaching the tool safely and securely to a lanyard. Often people who work near water or on scaffolding attach their tool to a lanyard on their person to avoid losing the tool if it's dropped.
Replaceable Pocket Clip & Quick-release Lanyard Ring
An accessory set that includes a removable clip, which allows the user to wear their multi-tool attached to a pocket or belt loop, and a removable quick-release lanyard ring, which allows for attachment to a lanyard. Often people who work near water or on scaffolding attach their tool to a lanyard on their person to avoid losing the tool if it's dropped.
Outside-accessible Features
This multi-tool features tools that are accessible while the tool is in its folded or closed position, mimicking the functionality of a pocket knife.
One-hand Operable Features
Every feature on this tool can be opened and operated with one hand. This enables the user to keep the other hand free for situations that require multi-tasking or a free hand.
*Age Restricted 18+, checks will be carried out before the sale is completed. Please remind yourself of knife laws Using & Carrying Knives
This knifeless Rebar features all-locking tools, removable premium wire cutters and more.
The EDC knifeless Rebar is perfect for environments and job sites that need a handy set of tools, yet don’t allow for knife blades. Built for tough jobs and the hands that do them, the EDC Rebar features scissors instead of a traditional knife blade. Other essential features include a file, screwdrivers, replaceable wire cutters, a saw and more.
SPECIFICATIONS:
Product Type:
Multi-Tool
Colour:
Stainless Steel
Sheath:
Black Nylon
Closed Length:
4 in | 10.16 cm
Weight:
6.7 oz | 189.94 g
16 TOOLS INCLUDE:
Needlenose Pliers
Perfect for holding small objects or using the pliers in tight, narrow spaces.
Regular Pliers
Conveniently hold and manipulate items.
Premium Replaceable Wire Cutters
Easily cut through regular and light-gauge wire with this replaceable, edge-retaining tool.
Premium Replaceable Hard-wire Cutters
Easily cut through electrical hard wires with this replaceable, edge-retaining tool.
Electrical Crimper
Found in the jaw of the tool and used for general purpose crimping of electrical connectors.
Wire Stripper
Safely strip multiple gauges and types of wire.
Saw
Quickly and easily saw through tough materials with this open-toothed tool.
Spring-action Scissors
Use one hand to quickly and easily cut through thin materials.
Awl w/ Thread Loop
Puncture tough materials to create or enlarge holes and sew with the loop.
Ruler (8 in | 19 cm)
A precise measuring guide for determining length in inches or centimetres, up to 8 inches or 19 centimetres.
Can Opener
Safely and easily open canned goods in wilderness situations.
Bottle Opener
A tool that allows the user to pop the top on a favourite beverage.
Wood/Metal File
Precisely file and smooth edges on wood and metal surfaces.
Phillips Screwdriver
Tighten or loosen Phillips head screws.
Large Screwdriver
Tighten and loosen larger flat-headed screws.
Small Screwdriver
Tighten and loosen small flathead screws.
FEATURES:
All Locking Features
All locking features means that every tool and knife on the body of the handle, with the exception of the plier head, will lock into place. Note that the Crunch; however, does feature both all locking tools and plier head. The all locking design enables the user to operate individual tools safely and effectively. By locking them into place when fully open, the user can put pressure on the implement while safely completing the job, before manually unlocking the tool to stow it away.
Lanyard Ring
This secure ring is for attaching the tool safely and securely to a lanyard. Often people who work near water or on scaffolding attach their tool to a lanyard on their person to avoid losing the tool if it's dropped.
*Age Restricted 18+, checks will be carried out before the sale is completed. Please remind yourself of knife laws Using & Carrying Knives
Cathedral (A4) Laminating Pouch 150 Microns (2x75) (Pack 20)
A4 laminating pouches for use with heated laminating machines. The high quality transparent pouches bond to both sides of your document, sealing and protecting, as well as enhancing the contrast and colour of your artwork.
Features
Suitable for A4 size paper
160 micron (2 x 75µ) thickness
Ideal for certificates, instruction sheets, posters, notices, signs, menus, etc
Seals and protects
Water-proof and Tear-proof
Improves contrast and colours
Supplied in packs of 20
