URSA Belts measure 5cm wide x 115cm long and can be cut with scissors to suit smaller waists. The Velcro end grips to any point along the exterior of the belt.
They are designed for use with URSA's range of Belt Pouches & Performance Pouches to suit all TX units. URSA developed a special double-bonded fabric specifically for these belts, giving them more strength and a robust 2mm thickness that stops the belt stringing up under the weight of transmitters.
Key Features
5cm x 115cm – trim to length with scissors for smaller waists.
Velcro end grips anywhere along the belt's exterior.
Strong 2mm double-bonded fabric holds its shape under transmitter weight.
Ideal for theatre & live performance, where artists often rig two transmitters onto one belt.
Can also be used with AquaPacs, or as a strap to clip transmitters onto.
Two colours: Beige & Black.
Machine washable at 40 degrees, tumble dry on low heat.
Designed by sound professionals. Made in the UK.
Filter Tabs are perfect for attaching to the side of your camera for quick and easy identification of what filter is currently fitted.
Our filter tabs are made in house out of a acrylic laminate material to ensure they are robust and can endure life on set.
The assistant set comes with a range of Filter Tabs that covers the most common filters. From this you can supplement with additional sets or individual tabs.
This Set comes with:
2x blank (Opaque clapperboard material so you can write your own filter on it)
OP FLAT
POLA
TRUE POLA
ND 0.3
ND 0.6
ND 0.9
ND 1.2
IRND 0.3
IRND 0.6
IRND 0.9
IRND 1.2
IRND 1.5
IRND 1.8
IRND 2.1
S/E 0.3
S/E 0.6
S/E 0.9
S/E 1.2
H/E 0.3
H/E 0.6
H/E 0.9
H/E 1.2
+1/2 DIO
+1 DIO
+2 DIO
+3 DIO
*The set also comes with a 2x blank Tabs made out of white acrylic that you can write on. This is perfect for when you have another random filter you need to identify.
Supplied with Hook material (Velcro) pre applied to the rear so they are ready to go.
This is a build to order item - Please allow a working day for them to be produced.
Individual Tabs or custom sets are also available, please contact us.
Available in the following Colours:
Black/White
White/Black
Red/White
Blue/White
White/Red
White/Blue
Yellow/Black
If you require another colour please contact us.
Compatible with a wide range of Brother's P-touch printers. Genuine laminated TZe labelling tape cassette.
24mm wide, 8m long
High quality genuine Brother cassette
Ensure durable, easily readable results
FEATURES & BENEFITS
Blade snapper included in handle for safety
Multi-position push button for quick, easy use
Two part moulded body that allows rapid blade changing.
BRAG Box dispenser: Sheet size: 42 x 33cm. Sheet colour: blue. Sheets per box: 280.
1 BRAG Box x 2 Clips x 140 Sheets = 280 Sheets, 2 ply
A portable dispensing system with a large capacity for holding the L20 wipe. Easy to handle and to store the strong fast-absorbing L20 wipes suitable for general purpose use.
These are a must on all shoots to help keep your equipment clean and dry.
Combined with Foam Cleaner these are perfect for all-round cleaning on set.
Manufacturer model: 7400 Wypall L20 Wipers 2ply Blue
Also known as Kimwipes, Kim Wipes. kimwipe, kim wipe
High matt rust paint that simulates atmospheric oxidisation of aged metals. Water soluble to easily tone back effects for the perfect result.
Click here for Usage Instructions
Low profile plastic hook on one side and velour loop on the other.
Perfect for cable & cord management.
Cut To Required Length On Site
Low Profile Hook & Loop Fasteners
Easy, adjustable and re-usable.
SOFT MINI FOAM MOUNTS WITH FLAT SIDES
URSA Mini Foamies have been designed specifically for smaller diameter microphones. These include the DPA 6060, Sennheiser MKE1, Countryman B6 however they also fit well onto Sanken COS11 mics. They are also best suited to be rigged onto the tip of an antennae of your transmitter, this can help reduce the RF loss you can get when an antennae is pressed against the body.
Designed with flat sides so they can be stuck directly to skin or costume. The foam provides a soft, quiet buffer to reduce clothing noise. Made from the highest quality sponge.
Available in Packs of 12 in Black, Brown, Beige or White.
More About URSA Mini Foamies
URSA Mini Foamies are compatible with microphones which measure 2-4mm diameter. These include DPA 6060, Sennheiser MKE1, Countryman B6. However they also fit well onto Sanken COS11 mics.
Can be rigged on to aerial tips to help reduce RF loss.
URSA Mini Foamies measure 22mm length, 14mm width and 7mm tall with a 1.5mm diameter hole that stretches up to 4mm. (Regular URSA Foamies measure 24mm length, 17mm width and 9mm tall with a 2.5mm diameter hole that stretches up to 6mm)
Mini Foamies
22 x 14 x 7 mm (LxWxH)1.5 mm Diameter holeStretches to up to 4 mm
Sanken COS11,DPA 6060/6061,Countryman B6,Sennheiser MKE1
Regular Foamies
24 x 17 x 9 mm (LxWxH)2.5 mm Diameter holeStretches to up to 6 mm
Sanken COS11,DPA 4060/4071Countryman B3,Sennheiser MKE2 & ME2R DE Lavalier
Hook and loop tape comes on a sticky-back self-adhesive liner, making it simple to cut to your desired size.
Ideal for endless projects. Strong adhesion offering an instant bond to most surfaces.
Offered in 50mm width.
Sold by the Metre or pack of 25 Metre Rolls
Aka: Velcro
Stickies Advanced are double-sided, hypoallergenic, adhesive pads used to affix lavalier microphones directly onto skin or on top of clothing. The soft fabric sandwiched between the two adhesive pads prevents the adhered mic from creaking due to skin or clothing movement. Stickies Advanced are designed to remain secure when attached to a dry surface and are intended to be discarded after use.
Stickier hypoallergenic adhesive on both sides
Supplied loose with easy peel-o tabs to make use easier
Round Larger diameter means perfect for use with the ever-popular DPA Concealers
O s allow wind protection on DPA Concealers, or folded-over with Overcovers
Squared perfect for use with Sanken RM-11 (the rubber mount produced for the ubiquitous Sanken COS-11 mic) & for general cable management on radio mics
Available in Packs of 25 & Bags of 100.
3M™ Durapore™ Tape is a strong, silk-like cloth tape which resists stretching and provides additional support. Our tapes have a high adhesive strength.
Strong, silk-like fabric backing provides additional support and resists stretching
Very high adhesive strength allows for use on challenging applications
Ideal for securing Lav mics ad concealers
*Supplied as non-sterile due to nature of our storage. Our stock is not intended for medical use.
100 x Anti-Static AF Screen-Clene Wipes in Resealable Tub
Pack Qty: 100 Tub
Removes bacterial, dirt, dust and grease
Can be used on mobile phones, monitors and touch screens.
Grey ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty faint light grey colour. A much lighter shade than Black. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly.
Grey – light grey colour. Very light shade, low density, subtle colour. Good for mixing with others or very light shading to just make things look slightly dirty. Several coats looks like one coat of Black (above). It is perfect for its use in TV or films, when the ageing effect needs to be washed completely. Makes a good “sweat” stain effect.
Usage Instructions:
Ensure surfaces are dry and grease free.
Mask areas not to be sprayed.
Shake can before use.
Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied.
Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed.
For small patches, spray through holes cut in a piece of paper.
For dark patches, spray closer to the surface.
Heavy spraying may drip or puddle.
Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces.
May not adhere to some polished surfaces.
Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining.
Do not use outside in wet weather.
Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.
How can you work in Film & TV and not have an industry-related keyring? This is where this mini clapper board keyring comes in. You could also use it for macro shots.
41mm x 26mm, 3mm Thick.
Comes with Keychain.
Made out of the same material and in the same way as Standard Engraved Clapperboards.
Made in Scotland.
Features:
3mm Plastic.
Opaque so that they can be back-lit.
Deep Engraved and infilled for durability.
Letters are Black infilled.
*Keys not included.
aka; clapperboard, slate, clapper board, macro board, Keyring clapperboard
Dulling / Anti-Flare spray can be applied to mirrors or glass, metal, gloss paint and ceramics etc. Easy to remove; the water soluble spray can be wiped off non-porous surfaces by rubbing with a damp or wet cloth. It is both fast drying and ozone friendly.
Tip: You can apply ageing spray over the top of dulling spray to create a matt finish ageing spray.
Dulling / Anti-Flare spray looks like a fine layer of dirt on glass and can be smeared using a damp/wet cloth to create a patchy effect.
Instructions for Use:
The spray can must be at room temperature to work properly. For best results, store overnight at room temperature before use.
Shake the spray can with the ball bearing rattling before every use. Use sparingly, apply several fine coats, not one heavy coat. Over application will reduce the dulling effect and may cause puddles. Best results are achieved when fine coats are applied.
Ensure surfaces are dry & grease free.
Mask areas not to be sprayed.
Dulling spray may stain/damage some surfaces.
Hold can upright 30cm (300mm) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated spray may appear if the button is only partially depressed.
For small patches, spray through a hole cut in a piece of paper.
Dulling spray is water soluble. The effects of spraying will be lost by washing in water.
Do not use outside in wet weather.
Practice your spraying technique on a disposable item before final use. Test before use on off-cuts or hidden surfaces/ off cuts for compatibility and adhesion.
Available in 400ml sized spray.
These Reversible Camera covers are perfect for keeping dust and light rain off your camera and head when they are not in use.
With a pull cord at the bottom to secure the cover in place.
It comes with an elastic strap for hand storage and quick deployment.
Silver inside to help reflect heat/sun. Available in a selection of colours. Reversible and colour will still show at the bottom when in the reversed setup.
Measure 140cm wide x 90cm tall.
Comes with a small black bag for easy storage and carrying.
YOUR LAVALIER MIC'S BEST FRIEND ON WINDY DAYS
The Bubblebee Windbubble consists of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing. And this 'nothing' is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside.
So instead of the wind hammering on the microphone and making those horrible, “I’m in the middle of a hurricane,” sounds, the capsule is kept in a calm space and allowed to perform at its best.
WINDBUBBLE FEATURES:
WORLD-RENOWNED PROTECTION FROM WINDBest in the industry wind protection thanks to the bubble-effect in the design. The construction of the Windbubble holds a quiet space around the mic capsule, allowing it to perform its duties in the best way possible and delivering detailed and natural sound to your transmitter or recorder.
WINDBUBBLES WON'T FALL OFFThey are built to stay safe and secure on your Lavalier microphone, with a tight fitting opening aperture - hence the four available sizes.
CHOOSE YOUR SIZEAvailable in four different sizes for over 50 popular lavalier mics. Please consult our Size Guide to check this.
CHOOSE YOUR COLOURAvailable in six different colours of high quality Bubblebee fur to make it easier to find a Windbubble for every occasion.
NATURAL SOUNDOur fur and mesh construction makes The Windbubble acoustically transparent to keep the sound very close to the microphones natural frequency response.
MULTI-PILE FURThe short, dense hair of the fur gives the Windbubble a rounded and organic shape while the longer fur slows wind down gradually for quieter wind protection.
NATURAL COLOURSThe Bubblebee fur is less shiny to blend better with skin, clothes and other surrounding materials.
QUALITY YOU CAN TRUSTDesigned in Denmark by sound lovers, for sound lovers!
MOUNT THE WINDBUBBLE WITH CONFIDENCE
The Windbubbles are specially constructed to be mounted quickly and easily on your specified type of microphones and to not fall off during use. To this end, the fit can be fairly tight around the base of the capsule. The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphone, by locating the hole easily. If the lav capsule is on the larger side, you can practise mounting the Windbubble on the tapered end of a ball-point pen as this helps get a feel for it.
WHAT'S INCLUDED: Each package contains 1x Windbubble
It is important that you check the correct size(s) suitable for your lavalier microphone. Please consult our Size Guide to check this.
Size 1 - Built for microphones with a diameter of 3,0-4,0 mmElastic opening circumference: 28 mm (1.10”)For Example: Sanken COS-11 (without metal windscreen)Countryman B6, B2D, E6Sennheiser MKE 1Sony ECM-90DPA 6060
Size 2 - Built for microphones with a diameter of 5,0-8,0 mm:Elastic opening circumference: 35 mm (1.38”)For Example: Sanken COS-11 (without metal windscreen)Countryman B3DPA 4060Sennheiser MKE 2, ME2, ME2-US (without windscreen), ME2-IILOM Mikro Uši
Size 3 - Built for microphones with a diameter of 5,0-9,0 mm:Elastic opening circumference: 40 mm (1.57”)For Example: Sanken COS-11 (with metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II
Size 4 - Built for microphones with a diameter of 8,0-13,0 mm:Elastic opening circumference: 42 mm (1.65”)For Example:Sanken COS-11 (with large metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)LOM Uši Pro
Kenair Anti-Reflect spray reduces reflections and glare in product photography.The Full Matt product is ideal for use when photographing silver, glass or other similar products with highly reflective surfaces. Safe for use on most surfaces (if in doubt we recommend you test on a small part of the surface prior to use). Easy to wipe off after use with a soft, dry cloth.
Super-Light Touch Screen Compatibility.
Almost unnoticeable at only 40g per glove* the Comfort Fit 0.5 allows you to work comfortably with an incredibly light and flexible barrier. Feel through the glove with incredible dexterity and virtually unrestricted movement thanks to a durable one-piece synthetic leather palm. Fully equipped with Dirty Rigger double-stitched seams, Airprene knuckle padding and breathable glove back, the 0.5 provides exceptional performance for general tasks.
Lightweight high-dexterity glove
Durable one-piece synthetic leather palm
Low profile black-out design
Interact touch-screen compatible technology
Airprene knuckle padding
Double-stitched seams
*Weight per glove in Medium size. Weights may vary for other sizes.
This glove is intended for general use. If your work is more demanding or requires a specific PPE rating, a glove from our Heavy Duty range may be more suitable.
True 75 Ω design meets the stringent HDTV / DVD requirements
“rearTWIST Principle” locking/unlocking
Excellent cable protection and retention
Guarantees a lifetime of min. 1000 mating cycles
Precise Swiss machined brass parts for outstanding durability
Cam Buckle 2pcs (250KG), Black
• 250kg rated strength with a minimum break strain of 125 DAN• Used for securing loads.• Conform to EN12195-2:2001 safety performance requirements.• Quick release buckle mechanism for easy use with grips on the buckle to prevent slipping.• Produced from 100% polyester material.• 250kg Cam Buckles have a 25mm webbing width.• Each part of the Cam Buckle is marked with manufacturers mark, size, length and ID mark.• Individual certification can be supplied.• Measured from bearing point to bearing point.
