Low profile plastic hook on one side and velour loop on the other.
Perfect for cable & cord management.
Cut To Required Length On Site
Low Profile Hook & Loop Fasteners
Easy, adjustable and re-usable.
Shurtape Console Tape is a premium paper tape that is printable and removes cleanly.
Is ideal for use on sound and lighting boards.
Easily tearable by hand this tape also leaves minimal to no residue when peeling off and can be used for writing on without any fuss.
Features:
Can write on it.
Low/No Residue
Tearable by hand
Flexible
Resistant to water, oil, and solvents
Provides excellent adhesion
Meets LHAMA requirements for use in arts and crafts
Ash Blonde – light brown, slightly golden sandy colour. Medium density and dries fast. When washed, leaves yellow/green stains on fabric. Very popular colour. Try using with Dark and Mid brown for a shading effect. Start with Dark Brown and shade into Ash Blonde.
Ash Blonde ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty red/brown colour. A lighter shade of brown than Dark Brown. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly.
Usage Instructions:
Ensure surfaces are dry and grease free.
Mask areas not to be sprayed.
Shake can before use.
Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied.
Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed.
For small patches, spray through holes cut in a piece of paper.
For dark patches, spray closer to the surface.
Heavy spraying may drip or puddle.
Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces.
May not adhere to some polished surfaces.
Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining.
Do not use outside in wet weather.
Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.
Compact Versatility.
Our unique design provides essential tool storage in an ultra-compact space. Simply attach it to your belt and you’ll almost instantly forget it’s there. This clenched-fist sized pouch utilises every millimetre of space with heavy duty elastic technology which constantly contracts to make the bag no bigger than it ever needs to be. With 6 screw-driver slots, 3 layered pockets and one expandable centre pocket, you’d be amazed just how much you can get in.
Compact expandable storage
Shape-mantaining structure
Magnetic closure flap
4 external open-bottomed screwdriver pockets
2 internal screwdriver pockets
1 internal back pocket – 8cm(H) x 6cm(W)*
1 internal central storage pocket – 8cm(H) x 6cm(W) x 5cm(D)*
2 front mounted pockets – 7cm(H) x 7cm(W)*
Belt loop attachment
Ultra-durable 600×600 denier material
Unloaded size 14cm(H) x 9.5cm (W) x 5cm (D)*
Pouch contents not included. Measurements are approximate*Pockets may be more narrow at the base/edge.
Ensure tools remain securely held in place at all times.If using this item while working at height you should ensure tools are adequately secured and could not become a ‘falling object’ hazard.
The Hirshman tool for insertion and removal of ground glasses. This tool is commonly used for Ground Glass Extraction in Arri cameras.
Clamping range: 4 mm
aka Hirschmann, Hirshman Tweezers
Upright Holder for Clapperboards and Smartphones
Presentation Clapperboard and Slate Stand, with insert groove for smartphones and tablets.
Wooden Block with two insert grooves, 3.2mm and 12mm, to allow the Slate and Smartphone/Tablet to stand on a table or flat surface
Wooden Presentation Stand with Filmsticks Logo on the Smartphone/Tablet side
Flippable to allow for mounting a smartphone or tablet for viewing on a flat surface
Allows the user to engrave or fix a plaque on the Stand Slate side for a presentation gift
Neutral wood colour to suit most shelves and tables
Weight and Dimensions:
L 80mm (3.15") x H 70mm (2.76") x D 20mm (0.79")
66g (2.33 oz) net weight
*Clapperboard and accessories not included. This is for the stand only.
Grips can use this to lubricate track. Or you can use it to lubricate a bunch of other stuff.
Also useful for cleaning and removing sticky residue.
Features:
Gets under dirt, marks and grease, making it easy to wipe them away
Protects metal surfaces with corrosion-resistant ingredients
Loosens rust-to-metal bonds and frees stuck, frozen or rusted metal parts
It quickly dries out electrical systems to eliminate moisture-induced short circuits
Smart Straw: This option has a permanently attached spray mechanism, it offers a quick and simple action for precision and wide area spray.
Scapa 3130 is a high quality 80 mesh, polyethylene coated waterproof cloth tape, coated with a pressure sensitive natural rubber resin adhesive and a superior matte finish. Scapa 3130 is available in Chromakey blue and green for the entertainment industry.
Good all round performance.
Can be written on.
Peels off cleanly after use, even after 6 weeks.
Very easy tear by hand.
Easy unwind for ease of use.
Good initial tack and ultimate adhesion.
Highly flexible and conformable to support use in difficult and uneven surfaces.
Can be removed cleanly from surfaces after being in situ temporarily.
Good strength and durability.
Excellent waterproof properties.
Excellent matt finish prevents the reflection of light.
FEATURES & BENEFITS
All keys stored in a size marked and colour coded plastic holder for easy selection.
Standard hex keys in high tensile steel for long life
STANLEY® 8-PIECE HEX KEY SET - 1.5mm - 6mm
It's all about the base.
An abrasion and puncture-resistant 4mm rubber base helps prevent pointed tools from piercing through the bottom of the pouch. Keep your equipment organised with a 2.5ltr master pocket and 5 slip-in pockets positioned around the inner walls. Instantly access your most commonly used tools from four open-topped pockets on the bag s outer edges and a built in pass-through for a long handle screwdriver** gives even more versatility.
2.5ltr main storage pocket 17cm(W) x 8cm(D) x 19cm(H)*
5 slip-in inner pockets various sizes
2 instant access outer pockets (sides) 7cm(W) x 2.5cm(D) x 13.5cm(H)*
2 instant access outer pockets (front) 7cm(W) x 2.5cm(D) x 10cm(H)*
Screwdriver pass-through**
4 steel d-rings for additional attachments
Side mounted grab handle
50mm belt loop
Rugged 600 600 denier nylon construction
Overall dimensions 23cm(W) x 12cm(D) x 20cm(H)
Pouch contents not included. Measurements are approximate
*Pockets may be more narrow at the base.
**Tool must be sufficiently wide inside of the pass-through in order for it to be retained in the pocket. Tools must be individually inspected to ensure they are held securely in place.
MOUNTING A LavALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER.
The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings.
These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style.
It can also be sewn into costumes by the costume department for daily repeated use.
Compatible with Sanken Cos-11 lavalier microphone.
Lav CONCEALER FEATURES
CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner.
SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule.
COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding.
WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule.
EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it.
CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets.
ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring.
The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule.
It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer.
WHAT’S INCLUDED:
1x Rubber Lav Concealer (Black/White)
1x Metal Clothing Clip (Black/Silver)
1x Wire Fabric Guard (Black/Silver)
1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models)
6x Lav Concealer Tape
MOUNTING A LAVALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER.
The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings.
These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style.
It can also be sewn into costumes by the costume department for daily repeated use.
The Lav Concealer for Sony ECM-V1 lav mic is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. The Sony ECM-V1 microphone comes included as standard in their UWP-D range of wireless radio mic kits (UWP-D21, UWP-D26 and UWP-D27).
Lav CONCEALER FEATURES
CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner.
SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule.
COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding.
WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule.
EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it.
CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets.
ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring.
The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule.
It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer.
WHAT’S INCLUDED:
1x Rubber Lav Concealer (Black/White)
1x Metal Clothing Clip (Black/Silver)
1x Wire Fabric Guard (Black/Silver)
1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models)
6x Lav Concealer Tape
Microfibre Polyester and Polyamide Cloth Strips with Adhesive Tape for Marker Pen
The Cloth Strip has a layer of 3M tape on the underside, allowing for it to be easily applied to the top of the marker pen, to erase non-permanent ink off the Filmsticks Slate and other surfaces. The Cloths are re-useable and can behand or machine washed.
The Cloth Strip comes in a pack of 5, measuring 100mm x100mm individually, 110mmx115mm x 5mm in a pack of 5.
*pen sold separately.
Black with Orange Trim
Tilt function
This also features a secondary position for the pole at the back of the umbrella which grants extra space and stability.
Fully taped seams
100% waterproof
Has an extendable spiked extension pole and a carry bag.
Dimensions*:
Closed: 50in/127cm long
Opened:
Width: 83in/210cm.
Height: 50in/127cm with no extension. 79in/200cm using the extension pole.
*Approximations.
Clamp-on matte boxes are the most common type of matte box now used in the industry.
To make sure you are not accidentally dropping it while changing filters or lenses a matte box safety chain is critical.
The KONDOR BLUE Matte Box system features a built-in loop to use safety chains made from nylon paracord to secure your matte box to your cage or rig to prevent accidents or when filming in precarious scenarios.
Features:
12-Inch-Long Matte Box Safety Chain
Ultra-Durable: Nylon Paracord
Stainless Steel Hardware
1/4-20" Screw & Swiveling Spring Loaded Clip
Weight: 2 oz
Length: 12"
Thickness: OD 12.75mm
Shurtape Console Tape is a premium paper tape that is printable and removes cleanly.
Is ideal for use on sound and lighting boards.
Easily tearable by hand this tape also leaves minimal to no residue when peeling off and can be used for writing on without any fuss.
Features:
Can write on it.
Low/No Residue
Tearable by hand
Flexible
Resistant to water, oil, and solvents
Provides excellent adhesion
Meets LHAMA requirements for use in arts and crafts
Speciality grade, photographic black masking tape for use in photo studios, film processing labs and darkrooms. Also recommended as a chart tape, for quality photographic reproduction work, cropping and edging negative for contact printing, and sealing camera bellow and film holders against light leaks.
Designed with an opaque black matte surface that ensures light-free masking, CP 743 is versatile, reliable and considered to be the "photographer's masking tape."
Features & Benefits
Speciality grade photographic black masking tape
Very high adhesion
Light-free masking
Good quick stick
Highly conformable
aka, shuretape, shure tape,
ShurTape (Permacel) - Black - 48mm (2") x 27m
On a small core for easier carrying
Constructed of padded, hook and loop knit with a non-scratch nylon backing, these squares can be wrapped around lenses, tools, or anything else that will fit inside. Hook and loop tabs on all four corners let you wrap and stick them in any shape.
Features:
19 inch from corner to corner
Hook and loop for sealing off the corners
Ideal for colour co-ordinating
Non scratch nylon backing
Available in Black, Blue, Red, Yellow & Grey
These are available in three sizes: 11", 15" and 19"
These Emergency Blankets can be used as camera covers that are perfect for keeping dust and light rain off your camera and head when they are not in use.
Silver inside to help reflect heat/sun. Available in red or blue
aka spaceblanket. space blanket
The Kimtech Science Precision 7557 are light duty 2-ply wipes that are effective in cleaning glassware, Lenses, slides, sensitive surfaces and equipment. Made of 100% pure fibre and having a high absorbency rate makes these wipes ideal to use in working environments that need delicate cleaning applications, Also contains an anti-static dispensing to reduce lint and antistatic discharge.
Features :
24 cartons x 100 white 2 ply sheets = 2400 sheets
Light duty, white-coloured wipes made from 100% pure fibre
Provided in a hygienic, user-friendly pop-up box
Low-lint absorbency for delicate applications and surfaces
GIVE A GIFT CARD - Gift cards are the perfect present for anyone working in the Screen Industry.
A CineStore Gift Card is a perfect gift for people working in the Screen industry. Very popular for gifting trainees or assistants at the end of production, your future film maker for their next shoot or just anyone who has a production up and coming.
You can buy e-gift cards to be used as part or full payment on our website cinestore.co.uk.
Gift Cards are Valid for up to 5 years.
Gift Card Terms & Conditions
URSA Plush Circles reduce wind and clothing noise on lav mics. Their super-soft, low-profile 5mm length plush fur protects the mic from light wind and provides camouflage to help hide it.
Each circle is 25mm in diameter, re-useable and low-profile, and can be stuck onto URSA's range of 25mm Sticky Circles and applied directly to skin or costumes.
What's Included
Standard pack: 9x Plush Circles plus 30x Sticky Circles.
Single-colour 100-packs also available.
Key Features
5mm plush fur - light wind protection and camouflage in a low-profile cover.
25mm diameter, super-soft to the touch and re-useable.
Compatible with URSA Sticky Circles, Premium Sticky Circles & Sticky Zeros.
Available in Black, Beige, White & Brown, plus a mixed Multipack.
Made in the UK.
URSA MiniMounts are slim, low-profile lav mic mounts designed to be rigged where larger square or round mounts cannot be hidden effectively.
Each mount is made from hardened plastic that does not deform or snap under pressure, and is hand-finished for the smoothest possible surface, allowing fabric to glide silently over the mic.
Microphone Compatibility
MiniMounts are microphone-specific - select the model to match your lav mic:
Brand
Compatible Models
DPA
4060 Core+, 2061, 406X, 606X, 4660HD
Sanken / Deity
COS11 / W.Lav Pro
RODE
LAV Mic Go & LAV Mic II
Sennheiser
MKE1, MKE2 & ME2
Shure
Twinplex
Sony
ECM-V1 / D11
URSA makes two mount shapes for the DPA 606X: a regular rectangular shape and a super-small 15mm circular model (the Circular MiniMount).
What's Included
1x MiniMount for your chosen microphone.
5x MiniMount Stickies.
Key Features
Slim, low-profile design for rigging where larger mounts cannot be hidden.
Hardened plastic that does not deform or snap under pressure.
Hand-finished smooth surface so fabric glides silently.
Available in Beige, Black, Brown & White (colour range varies by mic model).
