Made from high tensile steel with a self colour finish, meaning these are uncoated. Angular lifts will significantly lower working load limits and should be avoided. Hardened/Tempered. Thread length approx 20mm. When using these for some applications such as on camera top handles, the thread may need cut down. This will jepordise the integrity of the eyebolt and to what they are rated to. Therefor we sell them in their original condition.

Read more less

3/8" Camera Screw

Read more less

1/4in Camera Screw 

Read more less

High quality and versatile clamp Fits with a range of Super Clamp pins, hooks and studs Supports up to 15 Kg Can clamp onto a variety of round and square surfaces Awarded TÜV safety certification  aka K-Clamp, K Clamp

Read more less

The Original ColorChecker for Colour Control from Capture to Edit The standard 24-patch target, A4 sized, for all users where colour control is key 6 grayscale patches; RGB and CMYK colours and a mix of everyday colours for great results Can be used with the ColorChecker Camera Calibration software to create ACR or ICC profiles The colour Checker Classic target is designed to deliver true-to-life colour reproduction so photographers and filmmakers can predict and control how colour will look under any illumination. The target is an ideal size of 215.9 x 279.4mm, which is perfect for photographers and filmmakers. The ColorChecker Classic can be used for a variety of applications, including: Digital Photography: Create camera profiles, check images, correct white balance and perform colour correction Film Photography: Check films, lights, filters and paper Filmmaking: Use for colour grading; check cameras and lights Graphic Arts: Check any printing or proofing process ColorChecker targets are ideal for creating custom camera profiles (DNG and ICC), correcting neutral balance and exposure, and provides a standard for colour corrections. The targets provide a non-subjective standard of comparison to help determine the true colour balance of any colour rendition system. It provides the needed standard for comparing, measuring and analyzing differences in colour reproduction in various processes-avoiding costly mistakes. Features The ColorChecker target is an array of 24 scientifically formulated colours that has been the leading industry colour reference target for more than 40 years. It is designed to deliver true-to-life colour reproduction so that photographers and filmmakers can predict and control how colour will look under any illumination. Each of the 24 colours found on a ColorChecker target represents the actual colour of natural objects, such as human skin tone, foliage and blue sky, and reflects light just like its real-world counterpart. Since these colours exemplify the colour of their counterparts in the natural world and reflect light the same way in all parts of the visible spectrum, the squares will match the colours of representative samples of natural objects under any illumination, and with any colour reproduction process. Each solid patch is formulated individually to produce a pure, flat, rich colour. ColorChecker targets have been used by colour perfectionists for the past decade to create custom DNG profiles for Adobe Lightroom® and Photoshop® workflows. You can also build custom ICC camera profiles for use in Capture One® (or other ICC compatible software) when you combine ColorChecker targets with Calibrite ColorChecker Camera Calibration software. You’ll get accurate colour at capture based on specific lighting, camera and lens combination during any given shoot, saving valuable time in edit. Taking advantage of a ColorChecker target is easy. Simply include the ColorChecker in your photo or video capture and then later, while editing use it to compare, measure and analyse differences in colour reproduction in any colour rendition system. The ColorChecker can help you make global corrections based on accurate information. If you shoot a large number of images that all require the same colour correction, you know that editing a few key photos and applying your changes can sometimes change colours you didn’t intend to be changed. A shot of the ColorChecker captured under the same lighting as your images will provide a point of reference, so you can see exactly how changes will affect the rest of your colours before you apply them. This objective standard will help you avoid costly mistakes and trial-and-error colour adjustments while editing your images or colour grading. 3rd Party Software Support: Adobe Photoshop and Adobe Lightroom via a free plugin Color Finale Black Magic DaVinci Resolve for colour grading in a video editing workflow Hasselblad Phocus for ICC camera profiling 3DLUT Creator DxO Photolab 4 Technical Specifications Number of Targets: 1 Number of Colour Patches: 24 Target Size: 215.9 x 279.4mmHumidity Range: 85% or less, non-condensing Aka, Macbeth chart, mcbeth chart, colour chart. The Calibrite Camera Calibration Software is a supporting application and Lightroom plug-in to enable you to get the most of the target. For more information click here.

Read more less

Standard 1/4-20 inch thread mount for cameras Replacement camera platform for the Magic Arm Made of aluminium Standard 1/4 thread for cameras

Read more less

The original Sprig for 1/4" Whitworth threaded holes. Made from a flexible material and features a flexible thread for fast installation with a secure hold. A perfect accessory for securing and cleaning up the cables on your camera or monitors. Cable management device for filmmakers! Includes: 6 Sprigs Also Available is the Sprig Holder (sold separately). Perfect for helping keep your Sprigs organised and safe.

Read more less

The original Sprig for 3/8" Whitworth threaded holes. Made from a flexible material and features a flexible thread for fast installation with a secure hold. A perfect accessory for securing and cleaning up the cables on your camera or monitors. Cable management device for filmmakers! Includes: 3 Sprigs

Read more less

  Reducing Bushing Set, from female 3/8'' to 1/4'' male screw Female adapter 3/8'' to 1/4'' Made from Nickel plated Steel

Read more less

This brass Manfrotto 013 Double-ended Spigot is compatible with a variety of stands and grip gear including the 2940, 2941, 3077, 308, and 3095. It has a 5/8" (16 mm) diameter with 1/4"-20 and 3/8" threaded ends. Essential, top-quality, and extremely versatile, this adapter spigot is a necessary addition to any photographer’s or videographer’s toolkit. With a sleek and professional look, it is made with durable and lightweight brass that won't rust or deteriorate over time. Pair it with a wide variety of stands and grip gear for great versatility during your next shoot. It's two-sided design lets you attach two accessories at once to make shooting easier. Rest assured that your camera, monitor, or any other piece of equipment is completely secure thanks to the adapter spigot’s tight hold. you can even use it with an adjustable arm to mount cameras and capture new perspectives. It's ridged centre makes setup and removal quick and easy. What’s more, it weighs a mere 70g, so you won't even notice it’s there as you take it from location to location. Designed with a universally compatible 16mm diameter, it has a double male thread end with 6.4mm and 9.5mm attachments. This means that you can attach almost anything to it to take your shooting to the next level. Robust and built-to-last, this simple addition to your kit will save you time and energy and suits a variety of purposes. Ideal for use with a variety of stands and grip gear Tripod adapter spigot with universal 16mm diameter Standard 6.4mm and 9.5mm threaded ends for compatibility Weighs a mere 70g for great portability High-quality and durable brass body Weight: 0.07 kg Attachment (Bottom): 3/8″ screw, 5/8″ (16mm) stud Top Attachment:1/4″ screw, 5/8″ (16mm) stud Colour: Brass Superclamp Compatible: Yes Material: Brass Height: 6.8 cm

Read more less

Made from high tensile steel with a self colour finish, meaning these are uncoated. Angular lifts will significantly lower working load limits and should be avoided. Hardened/Tempered. Thread length approx 20mm. When using these for some applications such as on camera top handles, the thread may need cut down. This will jepordise the integrity of the eyebolt and to what they are rated to. Therefor we sell them in their original condition.

Read more less

Spigot with 1/4'' and 3/8'' screws Versatile use 3/8'' to 1/4'' screw attachments Made of Brass

Read more less

The Kondor Blue Anti-Twist Spacer for mini quick release plates is compatible with SmallHD Monitors featuring the locator pins and will keep your accessories from twisting or unscrewing while on the job. The thin aluminium plate slides over the thread on the separately available quick release plate, allowing you to attach the monitor securely. Dimensions: Dimensions: 5" x 3" x 0.2" Weight: 0.3 oz

Read more less

The original Sprig for 1/4" and 3/8" Whitworth threaded holes. Made from a flexible material and features a flexible thread for fast installation with a secure hold. A perfect accessory for securing and cleaning up the cables on your camera or monitors. Cable management device for filmmakers! Includes: 10 of 1/4" & 5 of 3/8" sprigs  

Read more less

3/8'' screw 5/8'' (16mm) socket Aluminium

Read more less

Elasticated ball bungees are simple, reliable and perfect for cable maintenance and equipment hanging.

Read more less

No messing about anymore in a camera prep with loose cables, this secure option will give you peace of mind wherever the camera goes. Whether you are doing handheld, Steadicam or a car rig going 60Mph, these cables will always stay where you put them. 5 x 13mm Screws and Cable Clamps Available in Blue, Red or Yellow Knurled thumb screws offer quick and easy tool-less adjustment.

Read more less

Multi-purpose, extremely versatile and built-to-last, this 16mm female tripod adaptor is an indispensable addition to any photographer’s kit. Small and lightweight, it’s the easiest way to get more from you next shoot. Perfect for adding a wide range of accessories to you light stand or turning it into a tripod. Features: Female tripod adaptor with standard 6.4mm screw for versatility Universally compatible 16mm socket Made from lightweight and durable aluminium Supports heavy equipment with ease A portable solution for any kit

Read more less

This new and improved version of CableGenie has a larger square base (25mm x 25mm) and new adhesive to provide an even stronger attachment to surfaces, a new elastic loop for a stronger grip on cables and a larger capacity. Fully adjustable, the flexible elastic loop can securely hold a single charging cable by your bed or tidy a whole bunch of cables (max 25mm diameter) under your office desk. The hook is shaped to allow one-handed attachment and release of the elastic loop for quick access to add and remove cables. The CableGenie can be attached in three ways. Use the supplied super strong adhesive pads to attach CableGenie to flat surfaces. Use supplied screws for extra security to attach CableGenie using the built-in slot. Use supplied zip ties to attach CableGenie to awkward objects (e.g. round table legs, microphone stand, etc) using the built-in slot. Screws and zip ties are now supplied to quickly utilise any of the three attachment methods. Two spare adhesive pads are also supplied in case repositioning of CableGenie is desired. Features: Securely holds multiple cables Quick release hook and long lasting hoop design allows quick and easy addition and removal of cables Reusable and adjustable Multiple attachment methods In the box: 10x CableGenie Cable Tidying Clips 12x Adhesive Pads (2 spare) 10x Screws 10x Zip Ties CableGenie has been designed by two British engineers with a passion for making cable management easy and sustainable. CableGenie offers reusable functionality of adding and removing cables without wastage and recyclable class 4 plastic packaging.  

Read more less

for light stands or tripods that have a top screw of 1/4'' Convert from female 1/4'' to 3/8'' male Made of Brass 2cm in height

Read more less

The ARRI 3/8” mounting spacer is made of aircraft grade aluminium and can be used fixed to the bottom of the Cine Lock without modification using new hardware included, or as a quick add-on by using the included longer 3/8” screw. This plate when secured to the handle will stop your CineLock from twisting around. Also commonly known as the Cinelock Anti Twist plate.  *Cine lock supplied separately  cinelock, cineloc

Read more less