A WINDBUBBLE DREAM TEAM FOR YOUR CONVENIENCE...   Each package contains 1 black, 1 grey, 1 brown and 1 white Windbubble. The Windbubbles are build to stay safe and secure on the microphone, and therefore comes in four different sizes. The frequency through the Windbubble is very close to the microphones natural sound. The wind reduction is the best in the industry, thanks to the bubble-effect in the design. The fur is less shiny to blend better with skin, clothes and other surroundings. Designed in Denmark by sound lovers, for sound lovers. The Bubblebee Windbubbles consist of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing.  And this nothing is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside.  So instead of the wind hammering on the microphone and making those horrible "I’m in the middle of a hurricane"- sounds, it passes right through. The Windbubbles are specially constructed to be mounted quickly and easily on the specified types of microphone and to not fall off during use.  The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphones. CHOOSE THE CORRECT SIZE It is important that you check the correct size(s) suitable for your lavalier microphone. Please consult our Size Guide to check this. Size 1 - Built for microphones with a diameter of 3,0-4,0 mmElastic opening circumference: 28 mm (1.10”)For Example:Sanken COS-11 (without metal windscreen)Countryman B6, B2D, E6Sennheiser MKE 1Sony ECM-90DPA 6060 Size 2 - Built for microphones with a diameter of 5,0-8,0 mm:Elastic opening circumference: 35 mm (1.38”)For Example:Sanken COS-11 (without metal windscreen)Countryman B3DPA 4060Sennheiser MKE 2, ME2, ME2-US (without windscreen), ME2-IILOM Mikro Uši Size 3 - Built for microphones with a diameter of 5,0-9,0 mm:Elastic opening circumference: 40 mm (1.57”)For Example:Sanken COS-11 (with metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II Size 4 - Built for microphones with a diameter of 8,0-13,0 mm:Elastic opening circumference: 42 mm (1.65”)For Example:Sanken COS-11 (with large metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)LOM Uši Pro

Read more less

REUSEABLE SOFT COVERS FOR LAV MICS Soft Circles provide Wind Protection and Camouflage for LAV Mics Our 25mm super-soft, stretchy, reuseable discs are a perfect addition to your Kit Box. With colours matching skin tones they can be used under semi-transparent garments. Compatible with URSA Sticky Circles & other stickies available on the market. Single Colour Packs Contents: 15 of one colour & 30 Stickies. Multi Pack Contents : 15 Soft Circles (5 x Black, 5 x White, 5 x Beige) & 30 URSA Sticky Circles. More About URSA Soft Circles Stretchy fabric allows allows the fabric to be wrapped around mounts to provide wind protection. Multipacks contain 5x White, 5x Black, 5x Beige & 30 Stickies. Single Colour Packs contain 15 of one colour & 30 Stickies. Available colours : Black, White, Beige & Brown. 25mm diameter circles, re-useable & super soft. Low profile lav cover creates less of a lump under costumes. URSA Soft Circles Overview URSA Circles Range Overview

Read more less

Overcovers utilise Rycote exclusive fur technology, providing excellent wind-noise protection for lavalier microphones. They consist of a discreet, fur covering and are supplied with Stickies. With a Stickie affixed to clothing or skin, a fur disc is affixed over the top of a lavalier microphone Features Large size (26mm) ideal for DPA Concealers; Supplied with Stickies Adv Round, at 23mm also bigger than Originals ; Introducing new beige colour to cater for even more applications; Available in Black, Grey, Beige & White; Available in Packs of 5 Overcovers (with 25 x Stickies, Round) & Bags of 100 (Overcovers only).

Read more less

The Windbubble PRO microphone windshields will give you the ultimate wind protection you can get for you omni-directional lavalier, field recording or headset mic. Whatever the make or size of your mic, the Windbubble PRO range of premium quality furry windshields keeps away those horrible wind noises and allows the clean and clear frequencies in. The Windbubble PRO lav mic windshield consists of a soft rubber mount. Unlike hard plastic mounts this special rubber mount absorbs shocks and stops vibrations transferring to your mic’s capsule. The rubber mount holds the furry windshield firmly in place on your mic, making sure it doesn't slip off. In addition to this, the rubber mount has a slight conical shape inside, which ensures you can't push your microphone too far into the windshield. This is very important to ensure that your microphone has a "bubble" of dead-air around the capsule for optimal wind protection and audio clarity. This means that your mic will consistently stay in the best possible position for maximum efficiency. There are four sizes of rubber mounts available to fit the most commonly used omnidirectional lavalier mics, headset mics, or field recording stereo-pair microphones, this includes The Windbubble Pro (Twin pack) Large. The fixed positioning of the mic using the rubber mount has given us the ability to engineer a smaller overall profile for the Windbubble PRO without compromising on the efficacy of the wind protection. However, each mount size is also available in a larger 'Extreme' version which consists of an inner foam core, surrounded by our much-loved multi-pile faux fur, to offer you an even greater level of wind protection for your microphone. These are especially helpful on those super windy exteriors and a perfect solution for factual, ENG and broadcast shoots. Every Windbubble PRO is available in our renowned multi-pile faux fur. This unique fur has been specially designed with varying lengths of fur to help gradually slow down the wind particles before reaching the mic. The base of the fur has a higher density of shorter hairs and an acoustically transparent backing material for maximum frequency transparency. So instead of the wind hammering on the microphone and making those horrible, “I’m in the middle of a hurricane,” sounds, the capsule is kept in a calm bubble of wind protection and allowed to perform at its best. Each Windbubble PRO is available in a single or twin-pack of lapel mic windshields and in four different colours (black, grey, white, and beige) to allow you to colour-match to the costume or outfit of the talent. Please note: The Windbubble PRO is only suitable for omnidirectional microphones. If you have a directional microphone, then the original Windbubble is the best microphone windshield for your mic. WINDBUBBLE PRO FEATURES: WORLD-RENOWNED PROTECTION FROM WINDBest in the industry wind protection thanks to the bubble-effect and rubber mount in the design. The construction of the Windbubble PRO holds a quiet space of dead-air around the mic capsule, allowing it to perform the best way possible and delivering detailed and naturally transparent audio to your transmitter or recorder. WINDBUBBLE PROS WON'T FALL OFFThe rubber mount firmly grips your mic, ensuring the windshield will stay in place and you don't have to worry about it falling off mid-shoot. CHOOSE YOUR SIZE AND MODELThe Windbubble PROs are available in four different sizes to fit the most popular lavalier, head-worn or field recording mics. Each size is also available in a standard version or and 'Extreme' version for greater wind protection.  NATURAL SOUNDThe fur and mesh construction makes The Windbubble PRO acoustically transparent to keep the sound very close to the microphone’s natural frequency response. CHOOSE YOUR COLOURAvailable in four different colours (black, grey, white and beige) oh high quality Bubblebee faux fur to make it easier to match a Windbubble PRO colour to most outfits. MULTI-PILE FURThe short, dense hair of the fur gives the Windbubble PRO a rounded and organic shape while the longer fur slows wind down gradually for best-in-class wind protection. The Bubblebee fur is less shiny than others, to better blend with skin, clothes and other surrounding materials. QUALITY YOU CAN TRUSTDesigned in Denmark by sound lovers, for sound lovers! It is important that you check the correct size(s) Windbubble PRO windshield suitable for your omnidirectional lavalier microphone. Please consult the size guide below to check this. XS - Built for omni microphones with a diameter of 3.0-5.0mmFor Example: Countryman B3, B6, E6, H6Deity W.Lav Micro, W.Lav ProDPA 6060, 6061, 6066Sanken COS-11 (without metal popshield)Sennheiser HSP 2, MKE 1, MKE 2Sony ECM-88, ECM-90 Small - Built for omni microphones with a diameter of 5.0-6.5mm:For Example: Deity W.LavDPA 4060, 4061, 4062, 4063, 4066, 4071, 4166, 4266Røde Lavalier, Lavalier Go, SmartLav+ LINKLavSennheiser ME 2 (old style with removable popshield 5.8mm ø from G2/G3 series)Shure Duraplex DL4, DH5, Twinplex TL45, TL46, TL47, TL48Sony ECM-77 Medium - Built for omni microphones with a diameter of 6.0-8.0mm:For Example: LOM mikroUši, mikroUši ProSennheiser ME 2-US (old style with removable popshield 6.5mm ø from G3/G4 series)Sony ECM-V1Tascam TM-10LTentacle MIC-01 ITEM CODES:BBI-WP-XS-BK/WH/GY/BEBBI-WP-S-BK/WH/GY/BEBBI-WP-M-BK/WH/GY/BE BBI-WP-XS-BK/WH/GY/BE-EBBI-WP-S-BK/WH/GY/BE-EBBI-WP-M-BK/WH/GY/BE-E BBI-WP2-XS-BK/WH/GY/BEBBI-WP2-S-BK/WH/GY/BEBBI-WP2-M-BK/WH/GY/BE BBI-WP2-XS-BK/WH/GY/BE-EBBI-WP2-S-BK/WH/GY/BE-EBBI-WP2-M-BK/WH/GY/BE-E

Read more less

The Viviana Pad is a multipurpose soft foam, backed with medical tape. IT can be used to help eliminate clothing rustle and a useful addition to aid solutions already in place. The pad may also be used as a concealer with your choice of lavalier microphone, the tape will adhere to both fabric and skin. In addition to this the pad may be used in conjunction with a concealer to create an additional layer providing more space between the microphone and the fabric or skin. The pad may also be used as a ‘foamie’ wrapped around a lavalier microphone or a TX antenna and can be cut to size. Available in packs of 12 or a box of 30 in black, white or beige.

Read more less

GET EVERYTHING YOU NEED IN THIS FUNDAMENTAL STARTER KIT FOR HIDING LAPEL AND LAVALIER MICROPHONES. In the world of sound production, audio recordings or video content creation, hiding mics can present many challenges, such as clothing rustle, wind, or cable noise. The Mic Hiding Starter Kit is tailored for all needs; offering a selection of essential tools to discreetly conceal the lavalier mic for clear and professional-sounding audio. With our kit, you can try before you buy, ensuring you find the perfect solution for your needs. Features: THE INVISIBLE LAV COVERS - FUR OUTDOORDesigned to be discreet yet powerful, our reusable faux Fur Outdoor covers are crafted for use under clothes, ensuring the elimination of rustling and wind noises for pristine audio recording. THE INVISIBLE LAV COVERS - ORIGINALCreated to keep an important space around your mic capsule for transparency and invisibility, our Original design facilitates easy mounting and discreet hiding of your Lavalier microphones directly on the skin or clothes. THE INVISIBLE LAV COVERS - MOLESKINOur Moleskin is crafted using an eco-friendly bamboo material to be a low-profile, allowing for the placement of lav mics on the skin or under clothes, effectively minimising friction noise whilst maintaining exceptionally discreet. THE INVISIBLE LAV TAPESticky double-sided hypoallergenic tape with a window to keep your mics capsule free from any glue residue. For use on its own or with all Invisible Lav Covers. THE INVISIBLE SKIN TAPEBreathable and sweat proof, this tape offers a discreet low-profile solution for effortlessly managing your lavalier microphone cable. The matte, skin-like finish facilitates seamless makeup application, allowing you to discreetly conceal your lapel mic cable in plain sight. THE MIC ACCESSORY CASEProviding an organised, protective and robust solution for keeping all your Mic Hiding Starter accessories together. The Mic Accessory Case includes 6 different compartments and transparent material ensures separation of accessories, allowing for effortless access. Whether you're a seasoned location sound recordist, videographer or content creator The Mic Hiding Starter Kit is the perfect accessory to help hide your lapel mic like a pro. WHAT'S INCLUDED:3 x FUR-OUTDOOR - Invisible Lav Covers (1 black, 1 white, 1 beige)2 x ORIGINAL - Invisible Lav Covers (1 black, 1 white, 1 beige)9 x MOLESKIN - Invisible Lav Covers (1 black, 1 white, 1 beige)15 x Invisible Lav Tape5 x Invisible Skin Tape1 x The Mic Accessory Case ITEM CODES:BBI-MHK-SK

Read more less

MOUNTING A LavALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. This Lav Concealer fits the Deity W.Lav Pro, the lavalier included in the Deity Theos System. Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape

Read more less

URSA Shorties are form-fitting shape wear for women with 3 built-in pouches. Comfortable, low profile & very handy under tight outfits for live performance, TV & Feature Films. Two Pouches (which will never slip!) on the inner leg and one on the lower back. URSA Shorties come in four sizes (Small, Medium, Large & Extra Large) & three colours (Beige, Brown & Black). Poppers are used on the pouches to keep the transmitter securely rigged inside. Aerials can be rigged upright or facing down in all pouches. Compatible with all Sennheiser, Shure, Audio Ltd, Lectrosonics, Wisycom & Zaxcom units. Product Specifications Size EU Size US Size UK Size Small 34-36 2-4 6-8 Medium 38-40 6-8 10-12 Large 42-44 10-12 14-16 Extra Large 46-48   14-16 18-20

Read more less

URSA MiniMounts are a slim, low-profile mount designed to be rigged where larger mounts cannot go. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. This MiniMount is deigned to fit the Sennheiser MKE2 MiniMounts are are available in four colours. Black, Brown, Beige, White. There are seven models available, They are designed specifically for the Deity W.Lav Pro, DPA 4060, 4071, 6060, 4660HD, RODE LAV/LAVii, Sanken COS11, Sennheiser MKE1 & MKE2, ME2, Shure Twinplex and Sony ECM-V1. More About URSA MiniMounts Easy to rig beside buttons on shirts where larger mounts will not fit! Their thin shape makes them perfect mounts for rigging on the skin in the cleavage or onto the bra. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. MiniMounts are moulded from hardened plastic. They won t snap under pressure or deform under heat. Each MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11 x 22mm and are designed specifically for MiniMounts. Our MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 11m wide x 22mm long x 6mm tall. Our 6060 & MKE1 measure 9.5m wide, 20mm long x 5mm tall. The DPA 4060 model also fits a CountryMan B3 with a Cap. The MKE1 model also fits a Countryman B6. The MKE1 & MKE2 models are designed to be used WITHOUT caps on the mics. This allows the mount to be as small as possible. Made for: Sennheiser MKE2 Dimension: 22 x 11 x 6mm Notes: Use without a cap.

Read more less

FOR ULTIMATE INVISIBILITY AND NOISE REDUCTION The Invisible Lav Covers - Moleskin offers a low-profile option to easily mount and hide your lavalier microphones directly on the skin or on clothes, drastically reducing friction noise whilst maintaining a high level of frequency transparency. The Invisible Lav Covers - Moleskin is made from sustainably sourced bamboo, making it significantly quieter and more eco-friendly compared to alternatives. Each package of Invisible Lav Covers - Moleskin consists of 10 black, 10 white, and 10 beige pieces of super-soft fabric and 30 pieces of our high-quality Invisible Lav Tape. FEATURES 30 pieces of (10x3) super soft, sustainably sourced fabric made from bamboo Low-profile, discreet design offers ultimate invisibility 3 colours for more mounting options 30 Pieces of high-quality hypoallergenic tape for easy fitting Stick directly to the skin or clothes Designed in Denmark by Sound Lovers, for Sound Lovers The transparent double-sided Invisible Lav Tape keeps your microphone and fabric solid in place on one side and sticks directly to the skin or to clothes on the other side allowing the microphone to be safely and securely mounted almost anywhere. The tape also has a small piece cut out in the middle of the tape, allowing your microphones capsule to remain free from a build up of sticky residue. SPECIFICATIONS Each piece of fabric and tape measures 2.2 cm x 2.2 cm (0.86” x 0.86”), and comes in a reusable cardboard package measuring 8 cm x 2.5 cm x 1.7 cm (3.1” x 0.9” x 0.6”). Weight: 10g (incl. packaging) Item code: BBI-ILC-M-30 Product warranty: This product is covered by their two-year warranty securing against defects in material, design and workmanship. The full-length warranty is available for download here.

Read more less

In the world of sound production, audio recordings or video content creation, hiding mics can present many challenges, such as clothing rustle, wind, or cable noise. The Mic Hiding Kit for Sennheiser ME 2-II is tailored for all needs; offering a selection of essential tools to discreetly conceal your Sennheiser ME 2-II lavalier mic for clear and professional-sounding audio. With this kit, you can try before you buy, ensuring you find the perfect solution for your needs. THE LAV CONCEALER FOR SENNHEISER ME 2-IIThis super soft, pliable mount is excellent at hiding your Sennheiser ME 2-II (Sennheiser G4, AVX, XSW-D or EW-D), whilst reducing any unwanted clothing noise and absorbing vibrations. It can be sewn, clipped on or taped to the talent or costume with the included accessories. The metal fabric guard ensures you keep an all-important space around the microphones capsule for optimal audio clarity, whilst the combination of the rubber and metal aides the reduction of vibration transference from the concealing layer of fabric to the microphone. This kit includes both black and white Lav Concealers for Sennheiser ME 2-II, allowing you to adapt the lapel mic mount to different costumes and fabrics.THE LAV CONCEALER TAPEDouble-sided hypoallergenic tape perfect for securely mounting The Lav Concealer to clothing or directly onto the skin. Ensuring reliable placement even where clips aren’t feasible, maintaining discreet microphone positioning. THE INVISIBLE SKIN TAPEBreathable and sweat proof, this tape offers a discreet low-profile solution for effortlessly managing your lavalier microphone cable. The matte, skin-like finish allows for easy makeup application, allowing you to discreetly conceal your lapel mic cable in plain sight. THE MIC ACCESSORY CASEProviding an organised, protective and robust solution for keeping all your Sennheiser ME 2-II Mic Hiding accessories together. The six different compartments and transparent material ensures separation of accessories, allowing for easy access. Please note that this is for the more recent ME 2-II (which now Sennheiser refer to as “ME 2”) mic which has a permanently affixed pop-shield.

Read more less

The Viviana Beetle Vampire Clip is compatible with all Beetle accessories, designed to fit with the Viviana Beetle lavalier concealer in one click. The Viviana Vampire Clip is an additional element for Viviana's modular Beetle range, available in White and Black.

Read more less

The Viviana Beetle Bra Clip is compatible with all Beetle accessories, designed to fit with the Viviana Beetle lavalier concealer in one click. The Viviana Bra Clip is an additional element for Viviana's modular Beetle range, available in White and Black.

Read more less

Viviana Dot stickers are low-profile hypoallergenic tape featuring a 1mm foam layer sandwiched between super sticky tape that can be used on skin and fabric. This configuration creates an additional barrier between lavalier microphones and fabric, effectively preventing rustling noise. They are skin-safe, clothing-friendly, and leave no residue. The Viviana Dot Premium are available in packs of 30 pieces, 70 pieces, and 120 pieces and are also compatible with Bubblebee Lav Concealers, Ursa Mini Mounts and DPA Concealers.

Read more less

The Viviana Beetle is a new concept low-profile concealer made for the Sanken COS11. Constructed of injection molded plastic, the Viviana Beetle guarantees quality and strength. The Viviana Beetle is compatible with all Beetle accessories including the Beetle Bra clip and Beetle Vampire clip, providing maximum versatility and ensuring high quality sound. The Beetle is the core element for Viviana's modular range, available in White and Black.

Read more less

The Viviana Beetle is a new concept low-profile concealer made for the Sanken DPA 6060. Constructed of injection molded plastic, the Viviana Beetle guarantees quality and strength. The Viviana Beetle is compatible with all Beetle accessories including the Beetle Bra clip and Beetle Vampire clip, providing maximum versatility and ensuring high quality sound. The Beetle is the core element for Viviana's modular range, available in White and Black.

Read more less

This pack includes 90 pre-cut Sticky ZEROs. These see-through adhesive circles have a low profile of just 0.4mm with a 14mm hole in the centre. They are hypoallergenic and safe to use directly on the skin or fabrics, as they won’t leave any residue and can be peeled off without tearing. Every URSA Sticky ZERO has a small peel-off tab for quick and easy use and is compatible with various mic mounts, such as RM11s, DPA Concealers, and URSA MiniMounts. Each Pack Contains 90 STICKY ZEROs. 24mm Sticky, with a 14mm cutout. Transparent and just 0.4mm thick, with double-sided hypoallergenic sticky tape. Use STICKY ZEROs to create a sandwich between an URSA Circle to create a wind jammer.

Read more less

MOUNTING A LavALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. Compatible with DPA 6060 lavalier microphone. Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape

Read more less

These clips allow you to clip the URSA pouch to any garment and hang it vertically or horizontally.

Read more less

The Sidekick Spares Kit is a full collection of accessories for your Sidekick In-Ear IFB Monitor. This tool kit includes each variation of Sidekick eartip (two of each in two different sizes - 12 eartips in total), The Gator Clip, as well as four Sidekick replacement Filter tools. WHAT'S INCLUDED 2 x Satellite Eartip (Small)2 x Satellite Eartip (Medium)2 x Round Eartip (Small)2 x Round Eartip (Medium)2 x Christmas Tree Eartip (Small)2 x Christmas Tree Eartip (Medium)1 x Gator Clothing Clip4 x Sidekick Filter

Read more less

Tie-pin, or Lavalier microphones as they are widely known, are ideal for discreet use in broadcast interview situations, their compact dimensions ensuring that they do not draw the eye on camera. Their convenient size means that they are even used by some radio broadcast engineers, despite their appearance not being an issue in that medium.In studio environments, Lavalier microphones are commonly used without foam wind covers, but when recording interviews outdoors, Lavaliers are just as prone to the deleterious effects of the wind as any other microphone, and a windshield is required to prevent the wind rendering the interview audio unlistenable.Rycote have manufactured a popular Lavalier Windjammer for many years, and are continuing to do so, but in recognition of the fact that most broadcasters today prefer their microphones to remain as unobtrusive as possible, a re-engineered version of that Windjammer has now been added to Rycote’s product line which is more discreet on camera.The fur on the Ristretto, as it is known, is considerably shorter than that on Rycote's existing Lavalier Windjammer. Like the existing Rycote Lavalier Windjammer, the Ristretto is secured to its microphone by a foam connector, but a rubber ring has now been added to both products for better grip and retention Main Benefits: High-level protection against wind noise for lavalier mics in the open air. Reduces lavalier microphone noise and clothes rustle. Rycote Codes Black Single: 065555 Grey Single: 065556 White Single: 065557 Black Pair: 065552 Grey Pair: 065553 White Pair: 065554

Read more less

Rycote PCS-Boom Quick-Release Connector For Boompoles The Professional Connection System (‘PCS’) is the ingenious new quick attachment/quick release connection system from Rycote. The first Rycote PCS product, the PCS-Boom Connector, has been designed for professional boom pole use. Attach the Connector to any 3/8” threaded boom pole, and affix the included 3/8” male ‘tip’ to your mic's shock-mount or windshield. Intuitive, one handed ‘click-in’ attachment and pull collar release mechanism, for fast and incredibly easy operation that provides a rock-solid, noise-free connection in use. Features Designed for professional boom pole use, with any 3/8” threaded boom pole Intuitive and incredibly easy attachment and release mechanism – for fast and simple swapping of mics (in shock mounts/windshields) Single handed, positive locking operation – just press in and ‘click’ to connect Rock solid and noise free in operation – for audio critical boom pole use Light weight (only 53g, Connector + Tip combined), small and durable Compatible with any make of microphone shock mount, suspension or windshield kit (fitted with a female 3/8” thread) Secure locking with 100 Newton maximum load (equivalent to 10kg/22lbs in a fixed position) Made out of robust, high quality materials in neutral colors (black and grey), with non-reflective finish Locks to boom pole without damaging the boom pole thread Designed and made in the UK Extensively tested in Germany What's Included 1 x PCS-Boom Connector 1 x 3/8" Male 'Tip' (Fitted with leather washer) 1 x Hex Key Model: RY-PCS-BOOM Part No.: 185801

Read more less

The WireRig turns any LAV Mic into a Gooseneck. It s perfect for car rigs & plant mics. The flexible copper wire extends up to 40cm from the core. Use one of the 8 notches around the base to lock off the wire. Each WireRig comes with 20 x Very Stickies to fix it down. More About URSA WireRig How to use: Coil the mic cable around the wire and bend the end back to lock the mic in place. Then adjust the wire to get the mic just where you need it. The malleable wire acts like a suspension to help reduce noise being transmitted down the cable to the capsule. To avoid wind noise simply apply a Rycote Mini-Windjammer. The added weight of this will not effect the WireRig. DIMENSIONS; 35mm long x 25mm wide x 8mm tall. Wire Length : 40cm

Read more less

Viviana Dot stickers are low-profile hypoallergenic tape featuring a 1mm foam layer sandwiched between super sticky tape that can be used on skin and fabric. This configuration creates an additional barrier between lavalier microphones and fabric, effectively preventing rustling noise. They are skin-safe, clothing-friendly, and leave no residue. The Viviana Dot Premium are available in packs of 30 pieces, 70 pieces, and 120 pieces and are also compatible with Bubblebee Lav Concealers, Ursa Mini Mounts and DPA Concealers.

Read more less