A Clear Zipper Case with a blue lined zipper. Fit up to 8 URSA Straps in one Case. Very handy for storing and organising your URSAs. Seen here stored using velcro on the lid of a radio mic box. Each case stores a different size of strap. Each URSA Zipper Case comes with an URSA Colour Chart Card & a fancy URSA Sticker. Dimensions : 203 x 127mm (8inx5in) SKU: U-ZIPPERCASE

Read more less

Plush Circles are a brand new 5mm length short fur LAV covers. Designed to use under costumes to help disguise mics, reduce clothing noise and protect the mic from light wind. 25mm diameter, super soft, re-useable lav mic covers. More About URSA Plush Circles Multipacks contain 3x White, 3x Black, 3x Beige & 30 Stickies. Single Colour Packs contain 9 of one colour & 30 Stickies. Available in 4 colours : Black, White, Beige & Brown. 25mm diameter, re-useable & super soft Low profile lav cover creates less of a lump under costumes.

Read more less

URSA MiniMounts are a slim, low-profile mount designed to be rigged where larger mounts cannot go. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. This MiniMount is deigned to fit the Works with Sanken COS11 MiniMounts are are available in four colours. Black, Brown, Beige, White. There are seven models available, They are designed specifically for the Deity W.Lav Pro, DPA 4060, 4071, 6060, 4660HD, RODE LAV/LAVii, Sanken COS11, Sennheiser MKE1 & MKE2, ME2, Shure Twinplex and Sony ECM-V1. More About URSA MiniMounts Easy to rig beside buttons on shirts where larger mounts will not fit! Their thin shape makes them perfect mounts for rigging on the skin in the cleavage or onto the bra. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. MiniMounts are moulded from hardened plastic. They won't snap under pressure or deform under heat. Each MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11 x 22mm and are designed specifically for MiniMounts. MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 11m wide x 22mm long x 6mm tall. Our 6060 & MKE1 measure 9.5m wide, 20mm long x 5mm tall. The DPA 4060 model also fits a CountryMan B3 with a Cap. The MKE1 model also fits a Countryman B6. The MKE1 & MKE2 models are designed to be used WITHOUT caps on the mics. This allows the mount to be as small as possible. Made for: Sanken COS11 Dimension: 22 x 11 x 6mm Notes: Works with Deity W.Lav Pro

Read more less

THE INVISIBLE Lav COVERS FUR OUTDOOR THESE FUR PADS ELIMINATE RUSTLING AND WIND NOISES FROM YOUR Lav MIC The Invisible Lav Covers FUR OUTDOOR allow you to easily mount and hide your Lavalier microphones directly on the skin or on clothes.  Each package of Invisible Lav Covers FUR OUTDOOR consists of 9 pieces of fur fabric in 3 colors: Black, Beige and White together with 30 pieces of Bubblebee Industries’ high quality Invisible Lav Tape. FEATURES Designed to be Used Under Clothes Eliminate Rustling and Wind Noises Stick Directly to the Skin or Clothes Hypo Allergic / Allergy Tested 3 Black, 3 Beige and 3 White Reusable Fur Pads 30 Pieces of High Quality Tape Designed in Denmark by Sound Lovers, for Sound Lovers The transparent double-sided Invisible Lav Tape keeps your microphone and fur fabric solid in place on one side and sticks directly to the skin or to clothes on the other side allowing the microphone to be safely and securely mounted almost anywhere. It’s all about being creative: under the collar, next to a buttonhole, or under the clothes in the chest area. The tape also has a small piece cut out in the middle of the tape, which is to be saved and used for fixing. While the fur fabric can be used up to four times, the tape must be replaced after each use. Since the Invisible Lav Covers FUR OUTDOOR package comes with 30 pieces of tape, you will be able to do 30 mounts per pack.

Read more less

WHERE SIMPLICITY MEETS EFFECTIVENESS The Cable Saver is an ingenious invention that adds strain relief and removes cable noise from your lav mic at the same time. The Cable Saver saves your cable from breaking at the combiner, reduces cable friction noise and adds elasticity to your microphone cable. Designed in Denmark by sound lovers, for sound lovers. THE CABLE SAVER'S MAIN FEATURES Saves your cable from breaking at the combiner Reduces cable friction noises Adds elasticity to your microphone cable Pack of 4 pieces Designed in Denmark by sound lovers, for sound lovers The Cable Saver is an original invention and design by Bubblebee Industries that dramatically reduces the cost of repairs of Lavalier microphone cables, connectors and transmitters while at the same time reducing cable friction noise to a very minimum. SO HOW DOES IT WORK? Put your Lavalier microphone cable through one of the rubber eyes of the Cable Saver. Wind the cable tight around the middle 3-4 times and through the rubber eye in the other end of the Cable Saver. That’s it. Now, if you drop the transmitter or the microphone cable gets caught in something, the cable saver will act as a spring allowing for a soft fall that will relieve the strain on your cable and save your equipment. An added benefit is that the Cable Saver reduces the cable friction noise so drastically that the noise almost disappears. That means no more scratching and rattling noises when someone accidentally touches the microphone cable. WHAT'S INCLUDED Each package comes with four Cable Savers – enough to save 2-4 microphones. They are made of durable black rubber that always comes back to its’ original form. We suggest you mount The Cable Saver indoors and under calm conditions since it is a rather small object. SPECIFICATIONS: Measurements: 2.5 cm x 0.5 cm (0.9” x 0.19”). Weight: 2,5g (incl. packaging) Item code: BBI-LCS-4BK NB: We do not recommend you to use The Cable Saver with a Countryman B6.We have experienced that the microphone/cable is too small and fragile.

Read more less

Sticky Circles for extremely sticky situations! URSA Very Stickies are available in packs of 90. They are 24mm diameter pre-cut stickies with peel-off tabs. URSA Very Stickies are also sold with the URSA WireRig for securing this rig onto almost any surface. As the name suggests these stickies are incredibly sticky! Good for when you need as much stick as possible. Warning: Very Stickies are so strong they can damage delicate fabric. They can leave residue and are not rated hypoallergenic. URSA Sticky Circles (Pack of 90) Each 24mm diameter URSA Very Sticky Circle has been pre-cut and has a small peel-off tab for easy & fast use. They are compatible with a variety of mic mounts including RM11s, DPA Concealers and can also be used with URSA MiniMounts. (You get 20 of these stickies with the URSA WireRig.)

Read more less

MOUNTING A LAVALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. The Lav Concealer for Sony ECM-V1 lav mic is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. The Sony ECM-V1 microphone comes included as standard in their UWP-D range of wireless radio mic kits (UWP-D21, UWP-D26 and UWP-D27). Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape

Read more less

SOFT MINI FOAM MOUNTS WITH FLAT SIDES URSA Mini Foamies have been designed specifically for smaller diameter microphones. These include the DPA 6060, Sennheiser MKE1, Countryman B6 however they also fit well onto Sanken COS11 mics. They are also best suited to be rigged onto the tip of an antennae of your transmitter, this can help reduce the RF loss you can get when an antennae is pressed against the body. Designed with flat sides so they can be stuck directly to skin or costume. The foam provides a soft, quiet buffer to reduce clothing noise. Made from the highest quality sponge. Available in Packs of 12 in Black, Brown, Beige or White. More About URSA Mini Foamies URSA Mini Foamies are compatible with microphones which measure 2-4mm diameter. These include DPA 6060, Sennheiser MKE1, Countryman B6. However they also fit well onto Sanken COS11 mics. Can be rigged on to aerial tips to help reduce RF loss. URSA Mini Foamies measure 22mm length, 14mm width and 7mm tall with a 1.5mm diameter hole that stretches up to 4mm. (Regular URSA Foamies measure 24mm length, 17mm width and 9mm tall with a 2.5mm diameter hole that stretches up to 6mm) Mini Foamies 22 x 14 x 7 mm (LxWxH)1.5 mm Diameter holeStretches to up to 4 mm Sanken COS11,DPA 6060/6061,Countryman B6,Sennheiser MKE1 Regular Foamies 24 x 17 x 9 mm (LxWxH)2.5 mm Diameter holeStretches to up to 6 mm Sanken COS11,DPA 4060/4071Countryman B3,Sennheiser MKE2 & ME2R DE Lavalier

Read more less

This URSA Back Strap allows you to securely rig microphone or IEM packs to the centre of back, between the shoulder blades. Medium size fits a 36-40 inch chest and Large fits a 41-45 inch chest. Adjustable velcro straps Available now in Black & Beige and Small, Medium and Large Transmitter can be rigged with the aerial facing down or up. Fits all transmitter/receiver sizes Rigs pack between the shoulder blades Machine Washable with detergent at 40 Degrees. Hang dry or Tumble Dry. URSA Straps use certified OEKO-TEX hypoallergenic fabric and gripper. URSA Back Strap Demo Product Specifications Strap Type Leg Strap Size Comparison Medium Size 36-40 inch Chest Large Size 41-45 inch Chest     Pouch Size Transmitter Compatibility Universal Pouch Audio Ltd 2040, Mini TX, A10, EN2 Shure PSM 1000, 900, 300, QLX, ULX, AD1, AXT Tascam DR-10L Sony UWP-D11 Saramonic UWMIC9 TX9 Lectrosonics LMb, WM, UM400a, DCHT, SMDB, SMB, LT & SSM Wisycom MPT40 / 41 Zaxcom TRX & ZFR, TRX LA2 & LT2, ZFR 200 & 300 Sennheiser G2, G3, G4, AVX, SK2000, SK5212, SK9000, SK 5212, SK 9000 Micron TX700B, Shure UR1M, ADX 1M, Q5X PlayerMic S

Read more less

MOUNTING A LavALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. Compatible with DPA 4060 lavalier microphone. Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape

Read more less

MOUNTING A LAVALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. Note: It’s important to note that this Lav Concealer is for the newer style ME 2-II lavalier mic (Sennheiser G3/G4/AVX/XSWD with permanently fixed pop-shield). If you have an older style ME 2 and ME 2-US in which you are able to remove the metal pop-shield (Sennheiser G2/G3), then you can find the correct Lav Concealer here. Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape

Read more less

The Windbubble PRO microphone windshields will give you the ultimate wind protection you can get for you omni-directional lavalier, field recording or headset mic. Whatever the make or size of your mic, the Windbubble PRO range of premium quality furry windshields keeps away those horrible wind noises and allows the clean and clear frequencies in. The Windbubble PRO lav mic windshield consists of a soft rubber mount. Unlike hard plastic mounts this special rubber mount absorbs shocks and stops vibrations transferring to your mic’s capsule. The rubber mount holds the furry windshield firmly in place on your mic, making sure it doesn't slip off. In addition to this, the rubber mount has a slight conical shape inside, which ensures you can't push your microphone too far into the windshield. This is very important to ensure that your microphone has a "bubble" of dead-air around the capsule for optimal wind protection and audio clarity. This means that your mic will consistently stay in the best possible position for maximum efficiency. The fixed positioning of the mic using the rubber mount has given us the ability to engineer a smaller overall profile for the Windbubble PRO without compromising on the efficacy of the wind protection. However, each mount size is also available in a larger 'Extreme' version which consists of an inner foam core, surrounded by our much-loved multi-pile faux fur, to offer you an even greater level of wind protection for your microphone. These are especially helpful on those super windy exteriors and a perfect solution for factual, ENG and broadcast shoots. Every Windbubble PRO is available in our renowned multi-pile faux fur. This unique fur has been specially designed with varying lengths of fur to help gradually slow down the wind particles before reaching the mic. The base of the fur has a higher density of shorter hairs and an acoustically transparent backing material for maximum frequency transparency. So instead of the wind hammering on the microphone and making those horrible, “I’m in the middle of a hurricane,” sounds, the capsule is kept in a calm bubble of wind protection and allowed to perform at its best. The Windbubble PRO is also available in XS, Small and Medium, in a single or twin-pack of lapel mic windshields and in four different colours (black, grey, white, and beige) to allow you to colour-match to the costume or outfit of the talent. Please note: The Windbubble PRO is only suitable for omnidirectional microphones. If you have a directional microphone, then the original Windbubble is the best microphone windshield for your mic. WINDBUBBLE PRO FEATURES: WORLD-RENOWNED PROTECTION FROM WINDBest in the industry wind protection thanks to the bubble-effect and rubber mount in the design. The construction of the Windbubble PRO holds a quiet space of dead-air around the mic capsule, allowing it to perform the best way possible and delivering detailed and naturally transparent audio to your transmitter or recorder. WINDBUBBLE PROS WON'T FALL OFFThe rubber mount firmly grips your mic, ensuring the windshield will stay in place and you don't have to worry about it falling off mid-shoot. CHOOSE YOUR MODELThe Windbubble PROs are available in a standard version, 'Extreme' version for greater wind protection or 'Extreme' Long-Haired for those super windy conditions.  NATURAL SOUNDThe fur and mesh construction makes The Windbubble PRO acoustically transparent to keep the sound very close to the microphone’s natural frequency response. MULTI-PILE FURThe short, dense hair of the fur gives the Windbubble PRO a rounded and organic shape while the longer fur slows wind down gradually for best-in-class wind protection. The Bubblebee fur is less shiny than others, to better blend with skin, clothes and other surrounding materials. QUALITY YOU CAN TRUSTDesigned in Denmark by sound lovers, for sound lovers! It is important that you check the correct size(s) Windbubble PRO windshield suitable for your omnidirectional lavalier microphone. Please consult the size guide below to check this. Large - Built for omni microphones with a diameter of 11.5-14.0mmFor Example: LOM Uši, Uši ProMicBooster Clippy EM272 ITEM CODES:BBI-WP2-L-BKBBI-WP2-L-BK-EBBI-WP2-L-BK-EL

Read more less

MOUNTING A LavALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. Compatible with Sennheiser MKE-2 lavalier microphone. Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape

Read more less

The URSA MiniMounts are a slim, low-profile mount designed to be rigged where larger mounts cannot go. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. This MiniMount is deigned to fit the DPA 4060. MiniMounts are are available in four colours. Black, Brown, Beige, White. There are seven models available, They are designed specifically for the Deity W.Lav Pro, DPA 4060, 4071, 6060, 4660HD, RODE LAV/LAVii, Sanken COS11, Sennheiser MKE1 & MKE2, ME2, Shure Twinplex and Sony ECM-V1. More About URSA MiniMounts Easy to rig beside buttons on shirts where larger mounts will not fit! Their thin shape makes them perfect mounts for rigging on the skin in the cleavage or onto the bra. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. MiniMounts are moulded from hardened plastic. They won t snap under pressure or deform under heat. Each MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11 x 22mm and are designed specifically for MiniMounts. Our MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 11m wide x 22mm long x 6mm tall. Our 6060 & MKE1 measure 9.5m wide, 20mm long x 5mm tall. The DPA 4060 model also fits a CountryMan B3 with a Cap. The MKE1 model also fits a Countryman B6. The MKE1 & MKE2 models are designed to be used WITHOUT caps on the mics. This allows the mount to be as small as possible. Made for: DPA 406x Dimension: 22 x 11 x 6mm Notes: Works with Countryman B3

Read more less

Cut your own applications from these 30 x 15cm Furry Rectangles of Super Soft 13mm length. The rear side of the fur is also very smooth and creates very little noise FurTangles provide wind protection and can help reduce clothing noise if applied between layers. More About URSA Fur Tangles Cut the furry rectangle into any shape you require then apply double-sided sticky tape to the back. Apply around microphone rigs to reduce the scratchy sound of hairy chests scratching against fabric. Simply stick a cutting of Available in Black, White & Brown.

Read more less

URSA Circular MiniMounts are a low-profile mount designed to be rigged discretely and retaining maximum surface area grip. They are in addition to their ultra slim standard MiniMounts. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. Circular MiniMounts are currently available in two colours and at the moment only for DPA 6060 (also fits 6061). More models and colours coming out soon. More About URSA MiniMounts Their round shape makes them perfect mounts for rigging on the skin on the chest or onto the underside of the costume or undergarments. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. Circular MiniMounts are moulded from hardened plastic. They won’t snap under pressure or deform under heat. Each Circular MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11x 22mm and are designed specifically for MiniMounts and Circular MiniMounts. Our MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 15mm in diameter. The DPA 6060 model also fits a DPA 6061. Made for: DPA 606x Dimension: 20 x 9.5 x 5mm

Read more less

The original ultra-slim, breathable strap. URSA Straps are 1mm thick, comfortable, low-profile straps. Using New Fabric Technology to create a unique bonded fabric which hook Velcro can grip to at any point. Ankle Straps are available in 4 Colours : Beige, Black, White or Espresso. Big Pouch only to suit all units. Please see the below transmitter guide for details on which Pouch Size suits your transmitter. Dimensions: 39cm long x 10cm wide Unique oval of Gripper is fitted inside the Pouch to keep the transmitter in place. Big Pouches measure 10cm tall x 8cm wide Integrated cable pocket allow the mic cable to be looped and secured on the strap without the need for sticky tape. Colour Coded labels allow quick identification of strap size. URSA Straps are Machine Washable at 40 degrees Hang dry or Tumble dry at a low temperature. All our straps are manufactured by hand in the United Kingdom. The URSA Ankle Strap measures 39cm and is designed to wrap around the ankle. Available in 4 Colours (Black, Beige, White & Espresso). Product Specifications All URSA Leg Straps come fitted with a Big Pouch this means you get maximum compatibility with a snug fit on larger transmitters, whilst smaller units are looser, they are still held well within the pouch.   Strap Type Leg Strap Size Comparison Ankle Strap 39 x 10 cm Calf Strap 47 x 10 cm Thigh Strap 63 x 10 cm     Pouch Size Transmitter Compatibility Small Pouch Lectrosonics SMDB, SMB, LT & SSM Wisycom MPT40 / 41 Zaxcom TRX LA2 & LT2, ZFR 200 & 300 Sennheiser SK 5212, SK 9000 Micron TX700B, Shure UR1M, ADX 1M, Q5X PlayerMic S Big Pouch Audio Ltd 2040, Mini TX, A10, EN2 Lectrosonics LMb, WM, UM400a, SMDB, SMB, LT, DCHT Wisycom MPT40 / 41 Zaxcom TRX & ZFR full range Sennheiser G2, G3, G4, AVX, SK2000, SK5212, SK9000 Shure PSM 1000, 900, 300, QLX, ULX, AD1, AXT Micron Explorers & Audio Wireless Tascam DR-10L Sony UWP-D11 Saramonic UWMIC9 TX9 (Small Transmitters also fit in a Big Pouch)

Read more less

YOUR LAVALIER MIC'S BEST FRIEND ON WINDY DAYS The Bubblebee Windbubble consists of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing. And this 'nothing' is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside. So instead of the wind hammering on the microphone and making those horrible, “I’m in the middle of a hurricane,” sounds, the capsule is kept in a calm space and allowed to perform at its best. WINDBUBBLE FEATURES: WORLD-RENOWNED PROTECTION FROM WINDBest in the industry wind protection thanks to the bubble-effect in the design. The construction of the Windbubble holds a quiet space around the mic capsule, allowing it to perform its duties in the best way possible and delivering detailed and natural sound to your transmitter or recorder. WINDBUBBLES WON'T FALL OFFThey are built to stay safe and secure on your Lavalier microphone, with a tight fitting opening aperture - hence the four available sizes.  CHOOSE YOUR SIZEAvailable in four different sizes for over 50 popular lavalier mics. Please consult our Size Guide to check this. CHOOSE YOUR COLOURAvailable in six different colours of high quality Bubblebee fur to make it easier to find a Windbubble for every occasion. NATURAL SOUNDOur fur and mesh construction makes The Windbubble acoustically transparent to keep the sound very close to the microphones natural frequency response. MULTI-PILE FURThe short, dense hair of the fur gives the Windbubble a rounded and organic shape while the longer fur slows wind down gradually for quieter wind protection. NATURAL COLOURSThe Bubblebee fur is less shiny to blend better with skin, clothes and other surrounding materials. QUALITY YOU CAN TRUSTDesigned in Denmark by sound lovers, for sound lovers! MOUNT THE WINDBUBBLE WITH CONFIDENCE The Windbubbles are specially constructed to be mounted quickly and easily on your specified type of microphones and to not fall off during use. To this end, the fit can be fairly tight around the base of the capsule. The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphone, by locating the hole easily. If the lav capsule is on the larger side, you can practise mounting the Windbubble on the tapered end of a ball-point pen as this helps get a feel for it. WHAT'S INCLUDED: Each package contains 1x Windbubble It is important that you check the correct size(s) suitable for your lavalier microphone. Please consult our Size Guide to check this. Size 1 - Built for microphones with a diameter of 3,0-4,0 mmElastic opening circumference: 28 mm (1.10”)For Example: Sanken COS-11 (without metal windscreen)Countryman B6, B2D, E6Sennheiser MKE 1Sony ECM-90DPA 6060 Size 2 - Built for microphones with a diameter of 5,0-8,0 mm:Elastic opening circumference: 35 mm (1.38”)For Example: Sanken COS-11 (without metal windscreen)Countryman B3DPA 4060Sennheiser MKE 2, ME2, ME2-US (without windscreen), ME2-IILOM Mikro Uši Size 3 - Built for microphones with a diameter of 5,0-9,0 mm:Elastic opening circumference: 40 mm (1.57”)For Example: Sanken COS-11 (with metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II Size 4 - Built for microphones with a diameter of 8,0-13,0 mm:Elastic opening circumference: 42 mm (1.65”)For Example:Sanken COS-11 (with large metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)LOM Uši Pro

Read more less

Viviana Fur For Lavs are pre-cut, low-profile, soft high density fur covered designed to protect lavalier microphones, offering noise reduction and increased wind protection. The unique fur cover helps to preserve natural audio. This product is available in square, round, and rectangular shapes. The square and round shapes are compatible with any lavalier microphones available on the market. However, the rectangular shape offers the possibility to create very low-profile lavalier microphone wind jammers, making it perfect for use with DPA 6060, Countryman B6, Sennheiser MKE1, and other low-profile lavalier microphones available on the market.

Read more less

The Viviana Moleskin Extreme is a unique soft moleskin with a thin double iron wire inside that helps to create more room between the lav and fabric. You can cut it, you can stick a lav on it with a fur and you can use it also with a concealer. The tape of Viviana skin extreme is very sticky and the double iron wire inside can really help you by making little arch, to create more room between the lav and the fabric to prevent rustling noise.

Read more less

THE ULTIMATE SOLUTION FOR DISCREET CABLE MANAGEMENT Crafted with hypoallergenic transparent materials, this breathable and sweat proof tape offers a discreet low-profile solution for effortlessly managing your lavalier microphone cable. The matte, skin-like finish facilitates seamless makeup application, allowing you to discreetly conceal your lapel mic cable in plain sight. Whether mounting a lavalier mic or seeking a subtle way of attaching an IEM earpiece cable to the skin (such as The Sidekick), The Invisible Skin Tape is your trusted choice for reliable and discreet cable fixing. Each pack includes 40 pieces of The Invisible Skin Tape, conveniently stored in a small, reusable zip-lock carry case. Features: SAFE TO USECreated using hypoallergenic transparent materials, our tape ensures skin-friendly, comfortable, and discreet cable concealment. SECOND LAYER OF SKINExperience adhesive durability, breathability and sweat-proof performance whilst providing a long-lasting solution without concerns of peeling or sliding off (often for days at a time), even in humid conditions or under the bright lights of Broadway and The West End. LOW-PROFILE DESIGNCrafted with subtlety in mind, our tape provides a discreet solution, guaranteeing your cable stays in place on skin and under clothes, without any concerns of cable noise caused by tape friction. HIDE IN PLAIN SIGHTFeaturing a matte, skin-like finish, our tape allows for makeup application; allowing you to effortlessly blend your lapel mic cable into the skin, making The Invisible Skin Tape an excellent solution for theatre and film productions. QUICK AND EASY TO USEWhether you're mounting a lavalier mic, headset mic or attaching the Sidekick (or other IEM earpiece) to the skin, our tape is a versatile solution that is quick and easy to apply and remove. Despite the longevity of the application, The Invisible Skin Tape can easily be removed without leaving any sticky residue on the skin. WHAT'S INCLUDED:40 x Invisible Skin Tape1 x Reusable zip-lock carry case ITEM CODES:BBI-IST-40

Read more less

MOUNTING A LavALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. Note: It’s important to note that this Lav Concealer is for the older style ME 2 and ME 2-US lav mic (Sennheiser G2/G3), in which you are able to remove the metal pop-shield. It is designed for use without this metal pop-shield. Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape

Read more less

The Bubblebee Microphone Accessory Case is a tough, protective microphone box with multiple compartments for accessories. Each compartment has a lid that keeps its contents safe and separated for easy access. The top of the Mic Accessory Case has the Bubblebee Logo imprinted with our slogan, "Making Sound Sound Better". Package contains two (2) Mic Accessory Cases. Pack contains 2 x strong ABS moulded cases Stainless steel reinforced hinge 5 Independant accessory compartments 1 large compartment for a lavalier microphone Transparent so you can see the contents "Making Sound Sound Better" printed on the front

Read more less

Fur Circles are designed to be used under clothing to reduce wind noise and clothing rustle. Fur Circles are cut using a unique drilling method which only cuts the base and allows allows the fur to be of an equal length around the edge of the circle. Fur Circles can be compressed under tight costumes and leave less of a lump than other furs.

Read more less