This is a mounting bracket to install electronics or instrumentation panels in Protector cases. An o-ring gasket seals the panel so that the case remains watertight, even with the lid open. Each kit includes a panel frame, brass inserts, mounting screws and an o-ring, and comes with simple instructions on how to screw the panel frame into the case.
These cases are designed rugged, and travel the harshest environments on earth.
Against the extreme cold of the arctic or the heat of battle, Peli cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
FEAURES:
Interior: 21.1 × 14.7 × 9.5 cm
Pick N Pluck™ with convoluted lid foam
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
These cases are designed rugged, and travel the harshest environments on earth.
Against the extreme cold of the arctic or the heat of battle, Peli cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
FEAURES:
Interior: 21.1 × 14.7 × 9.5 cm
Pick N Pluck™ with convoluted lid foam
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
The Peli 0340 is the smallest of the waterproof cube cases in the Peli Protector range.
Features:
• Automatic pressure equalisation valve
• Double wide handles
• Easy-open latches
• Retractable handle
• Rubber 'O-ring' seal
• Stackable
• Wheels
• Stainless steel padlock hasps
• IP67 rated protection
Interior Dimension: 457 x 460 x 450 mm
Exterior Dimension: 520 x 520 x 489 mm
Weight: 10.89 kg
Interior: 23.5 × 18.1 × 10.5 cm
Pick N Pluck™ with convoluted lid foam
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
Easy open Double Throw latches
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
The 0370 Protector Case is the largest of the cube cases. The case is available with or without a foam set. Padded dividers and a lid organiser are also available separately.
Features:
• Automatic pressure equalisation valve
• Double wide handles
• Easy-open latches
• Rubber 'O-ring' seal
• Stackable
• Stainless steel padlock hasps
• IP67 rated protection
Interior Dimension: 610 x 610 x 605 mm
Exterior Dimension: 673 x 673 x 641 mm
Weight: 14.5 kg
The Peli 0350 is a large cube case, popular for storing high-spec drones as well as many other large, fragile or expensive pieces of equipment.
Features:
• Automatic pressure equalisation valve
• Double wide handles
• Easy-open latches
• Rubber 'O-ring' seal
• Stackable
• Stainless steel padlock hasps
• IP67 rated protection
Interior Dimension: 507 x 510 x 498 mm
Exterior Dimension: 571 x 569 x 540 mm
Weight: 11.79 kg
The iM3410 is a long, watertight case from the Peli Storm range.
Features:
• Lightweight HPX resin
• Press & pull latches
• Rubber overmoulded handles
• Rubber 'O-ring' seal
• Vortex® valve
• Wheels
• Stainless steel padlock hasps
• IP67 rated protection
Interior Dimension: 1384 x 254 x 152 mm
Exterior Dimension: 1466 x 323 x 169 mm
Weight: 7.4 kg
The Peli iM3300 Storm case is a long, protective case with two soft-grip handles and in-line wheels for transporting.
Features:
• Lightweight HPX resin
• Press & pull latches
• Rubber overmoulded handles
• Rubber 'O-ring' seal
• Vortex® valve
• Wheels
• Plastic padlock hasps
• IP67 rated protection
Interior Dimension: 1282 x 355 x 152 mm
Exterior Dimension: 1366 x 419 x 170 mm
Weight: 8.66 kg
This long case is suitable for protecting any kind of long equipment. The in-line wheels and soft-grip handles make it very easy to transport.
Features:
• Lightweight HPX resin
• Press & pull latches
• Rubber overmoulded handles
• Rubber 'O-ring' seal
• Vortex® valve
• Wheels
• 4 x Plastic padlock hasps
• IP67 rated protection
Interior Dimension: 1117 x 355 x 216 mm
Exterior Dimension: 1198 x 419 x 234 mm
Weight: 9.25 kg
The iM3200 is a long Peli Storm military-spec protective case with wheels. It has two handles, enabling easy transportation.
Features:
• Lightweight HPX resin
• Press & pull latches
• Rubber overmoulded handles
• Rubber 'O-ring' seal
• Vortex® valve
• Wheels
• Plastic padlock hasps
• IP67 rated protection
Interior Dimension: 1117 x 355 x 152 mm
Exterior Dimension: 1198 x 419 x 170 mm
Weight: 8.03 kg
A rugged, waterproof case from the Peli Storm range, the iM3100 is shallow and long - particularly popular with the Police and Military.
Features:
• Lightweight HPX resin
• Press & pull latches
• Rubber overmoulded handles
• Rubber 'O-ring' seal
• Vortex® valve
• Wheels
• Plastic padlock hasps
• IP67 rated protection
Interior Dimension: 927 x 355 x 152 mm
Exterior Dimension: 1011 x 419 x 170 mm
Weight: 6.89 kg
The iM3075 is a large case from the Peli Storm range. It is watertight and virtually indestructible.
Features:
• Lightweight HPX resin
• Press & pull latches
• Retractable handle
• Rubber overmoulded handles
• Rubber 'O-ring' seal
• Vortex® valve
• Wheels
• Plastic padlock hasps
• IP67 rated protection
Interior Dimension: 757 x 528 x 452 mm
Exterior Dimension: 845 x 620 x 490 mm
Weight: 14.36 kg
The iM2975 is a large, wheeled rugged case from the Peli Storm range.
Features:
• Lightweight HPX resin
• Press & pull latches
• Retractable handle
• Rubber overmoulded handles
• Rubber 'O-ring' seal
• Vortex® valve
• Wheels
• Plastic padlock hasps
• IP67 rated protection
Interior Dimension: 736 x 457 x 350 mm
Exterior Dimension: 795 x 518 x 394 mm
Weight: 10.34 kg
A very tough, watertight case - the iM2950 is a great choice for transporting and protecting any kind of gear or equipment.
Features:
• Lightweight HPX resin
• Press & pull latches
• Retractable handle
• Rubber overmoulded handles
• Rubber 'O-ring' seal
• Vortex® valve
• Wheels
• Plastic padlock hasps
• IP67 rated protection
Interior Dimension: 736 x 457 x 267 mm
Exterior Dimension: 795 x 518 x 310 mm
Weight: 9.43 kg
The iM2875 Peli Storm case is perfect for transporting fragile or expensive equipment. Not only is the case watertight and dustproof, it's also extremely tough.
Features:
• Lightweight HPX resin
• Press & pull latches
• Retractable handle
• Rubber overmoulded handles
• Rubber 'O-ring' seal
• Vortex® valve
• Wheels
• Plastic padlock hasps
• IP67 rated protection
Interior Dimension: 571 x 536 x 289 mm
Exterior Dimension: 632 x 602 x 333 mm
Weight: 9.12 kg
A watertight, protective case from the Peli Storm range. The iM2750 has in-line wheels and a telescopic handle making it a very easy-to-transport case.
Features:
• Lightweight HPX resin
• Press & pull latches
• Retractable handle
• Rubber overmoulded handles
• Rubber 'O-ring' seal
• Vortex® valve
• Wheels
• Plastic padlock hasps
• IP67 rated protection
Interior Dimension: 559 x 432 x 322 mm
Exterior Dimension: 625 x 500 x 366 mm
Weight: 8.39 kg
The Peli Storm iM2700 case is available in black, yellow and OD green. It can be bought with or without pick 'n' pluck foam or padded dividers.
Features:
• Lightweight HPX resin
• Press & pull latches
• Rubber overmoulded handles
• Rubber 'O-ring' seal
• Vortex® valve
• Plastic padlock hasps
• IP67 rated protection
Interior Dimension: 559 x 432 x 203 mm
Exterior Dimension: 625 x 500 x 218 mm
Weight: 5.03 kg
The iM2620 makes a great super-tough travel case with its telescopic handle and in-line wheels.
Features:
• Lightweight HPX resin
• Press & pull latches
• Retractable handle
• Rubber overmoulded handles
• Rubber 'O-ring' seal
• Vortex® valve
• Wheels
• Plastic padlock hasps
• IP67 rated protection
Interior Dimension: 508 x 355 x 254 mm
Exterior Dimension: 538 x 406 x 269 mm
Weight: 5.66 kg
The Peli iM2600 from the Storm range is an extremely tough, watertight case - perfect for protecting fragile or expensive equipment.
Features:
• Lightweight HPX resin
• Press & pull latches
• Rubber overmoulded handles
• Rubber 'O-ring' seal
• Vortex® valve
• Plastic padlock hasps
• IP67 rated protection
Interior Dimension: 508 x 355 x 196 mm
Exterior Dimension: 538 x 406 x 211 mm
Weight: 4 kg
