Dulling Spray is a fine, colourless spray used to reduce glare on reflective surfaces and minimize hot spots. Semi-Matt has the same fine spray pattern as Matt, together with the same dulling effect, but retains the roundness of the subject. All K-Line sprays are easily removed with a soft cloth or with a little light spirit. None are intended to be permanent - they are rapid aids with a maximum of safety. 400ml - Made in Britain.

Read more less

Dulling spray is a fine, colourless spray used to reduce glare on reflective surfaces and minimize hot spots. The original favourite, for cutting flare on polished articles, now improved. Almost transparent, it can be used in colour photography without obscuring decorative designs. It is safe with most plastics. Used by museums on antiques, and in dentistry to reduce flare on polished instruments! Applications  Photographic  Motion Picture  TV Studio Removes glaring highlights from polished surfaces in camera work. Coats evenly with a very fine spray pattern - it effectively dulls any polished object to be photographed. Directions Shake the can well, and whilst spraying, hold not more than 30cm (12 inches) from the object. The spray sets in about 2 minutes, and further coats may be added if necessary. It wipes off easily with a soft cloth and all smears can be removed with a little spirit. K-LINE spray is safe with most materials, but a test should be made on a scrap surface if in doubt, especially with some types of plastics. 400ml - Made in Britain.

Read more less

Khaki ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty green/brown colour. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly. Khaki – green/brown colour. More dense, harder to wash. When washed, leaves yellow/green stains on fabric. Excellent for shading and blending with other brown and yellowish sprays. Usage Instructions: Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather. Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.

Read more less

Nicotine Yellow ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty yellow colour. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly. Nicotine yellow – Light dirty Yellow/Brown colour. Very light density. When washed, leaves yellow stains on fabric. Looks just like the stain from cigarette smoke. (When sprayed on white paper it makes it look just like parchment). This light shade works well as a highlight when used with the other darker brown colours. Usage Instructions: Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather. Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.    

Read more less

Rust ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty rusty red colour. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly. Rust- rusty red / brown colour with shades of orange and yellow. Medium density and dries fast. When washed, leaves yellow/brown stains on fabric. Very good when used for shading. Good “reddish” dirt / rust effect. Usage Instructions: Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather. Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.    

Read more less

Ash Blonde – light brown, slightly golden sandy colour. Medium density and dries fast. When washed, leaves yellow/green stains on fabric. Very popular colour. Try using with Dark and Mid brown for a shading effect. Start with Dark Brown and shade into Ash Blonde. Ash Blonde ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty red/brown colour. A lighter shade of brown than Dark Brown. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly. Usage Instructions: Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather. Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.

Read more less

Mid Brown ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty brown/green colour, a slightly greener shade than Dark Brown The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly. Mid Brown – green muddy brown colour. Medium density and dries fast, great for finishing touches on set. When washed, leaves yellow/green stains on fabric, just like Dark Brown. Good for shading. Usage Instructions: Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather. Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.  

Read more less

Dark Brown ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty dark brown colour, a slightly redder shade than Mid Brown. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Dark Brown – muddy brown colour. Medium density, and dries fast. When washed, leaves yellow/green stains on fabric, but this can be good when doing a sweat or dirt effect. Good for shading. If you are buying just one spray, then make it this one or Mid Brown. Both are good for an ageing base coat, or on its own for almost any type of ageing effect. Usage Instructions: Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather. Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.

Read more less

Grey ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty faint light grey colour. A much lighter shade than Black. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly. Grey – light grey colour. Very light shade, low density, subtle colour. Good for mixing with others or very light shading to just make things look slightly dirty. Several coats looks like one coat of Black (above). It is perfect for its use in TV or films, when the ageing effect needs to be washed completely. Makes a good “sweat” stain effect. Usage Instructions: Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather. Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.

Read more less

Black ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty black/blue colour. Not as dark as our Soot Black ageing spray. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Black – black / blue slate grey colour. Not as dark as Soot Black and dries faster. Washes better. May be left with a light shade of grey on the fabric after washing. Black works well when mixed with Dark Brown and Mid Brown, especially when used on hems. Usage Instructions: Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather.

Read more less

Soot Black ageing spray has a stronger, more powerful spray nozzle than our other ageing sprays. The spray deposits a semi-opaque layer of black dye that creates a dirty, black old or aged look. The spray is water soluble and can be smeared and reworked by wetting with water, but much less water soluble than our other ageing sprays. Fast drying. Ozone friendly. Soot Black – a rich matt black.  Very high density, very dark, almost opaque.  A very resistant and permanent colour, no matter what the fabric.  Even visible on darker coloured items.  Least washable of all our sprays, will almost always leave a black stain.  More powerful than the other ageing sprays and takes longer to dry. Usage Instructions: The spray comes out at a faster speed than other ageing sprays – it’s best to test before use. Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather.

Read more less

Esselte (A4) Ring Binder Polypropylene 2 (Black) Durable PVC covered board, glued and welded in construction for additional strength. 35mm spine complete with clear ticket window and removable spine label. 25mm O-ring can hold up to 200 sheets. Size: A4. Black. Features Durable PVC covered board, glued and welded in construction for additional strength 35mm spine complete with clear ticket window and removable spine label 25mm O-ring can hold up to 200 sheets Size: A4 Black

Read more less

Designed to fit all staplers using 24/6mm staples, these Q-Connect Staples are precision made and engineered to the highest standards of quality to give excellent performance. This bulk pack contains 1,000 24/6mm staples. Size: 24/6mm Precision engineered quality Pack of 1,000

Read more less

Esselte Leitz 5500 Metal Stapler (Metallic Black) 30 Sheets of 80gsm Paper Ergonomic touch, easy to press down Top loading with integrated staple remover Capacity of stapling: 3 mm/30 sheets (80 gsm paper) With new Direct Impact Technology (DIT) for absolutely perfect, hassle-free stapling Integrated staple remover 180 degress opening top loading mechanism Open and closed stapling - easy changing by turnable anvil, and also nailed stapling possible Material: Metal with plastic housing, with non-slip plastic base to prevent scratching office furniture Uses staples No. 24/6 or 26/6 65mm full throat depth 30 sheet paper capacity Staple No 24/6, 26/6 Colour: Black

Read more less

Clean, reusable mastic adhesive with a multitude of uses Ideal for sticking up maps, charts etc, or holding telephones, calculators etc firmly to desks Non-toxic Handy pack

Read more less

Really useful boxes are perfect for storing consumables, accessories and other equipment for transport to and from set. Additionally it can keep your camera truck organised. Additional suggested uses: A4 files Foolscap files Christmas decorations Car boot box Dimensions: External: 480 x 390 x 310 Internal: 370 x 310 x 280(length x width x depth in mm) Weight: 2,100g

Read more less

Our army camouflage tarpaulins have camo printing on one side and are dark green on the other These are very useful for when shooting on location and require to blend cases and equipment into the the surrounding. Supplied as a Single Tarpaulin The 80gsm army camo tarpaulins are an economy grade lightweight tarp that comes with 12mm aluminium eyelets at 1 metre intervals in reinforced hems, and remain flexible even in sub-zero temperatures. Camo tarps are not only waterproof but also UV protected, rotproof and shrinkproof. Cut Size : 2.7m x 3.5m (approx 9' x 12') Approx Weight : 756g Coverage : 9.45m2

Read more less

A2 White Card - 300gsm (5 Sheets) May be rolled for shipping.

Read more less

Mitre Fast Bonding Kit is a two part instant adhesive system comprising a cyanoacrylate adhesive and aerosol activator. Mitre Fast is mainly used in the furniture, timber, kitchen and plastics industries where its instant bonding properties dramatically reduce assembly times for mitre joints when compared to conventional wood adhesives Also suitable for bonding of MDF, rubber, PVCu, metals etc Solvent based Quick curing/drying Timber, Plastic, Metals

Read more less

Stabilo Boss Highlighters Chisel Tip 2-5mm Line Assorted (1 x Wallet of 4) The original vibrant highlighter and Europe's Number 1 Line width: 2.0 - 5.0mm Wedge tip draws broad lines, highlights and underlines. Universal, water based ink for use on most paper STABILO Anti-dry out ink technology : 4 hour cap off time Easy to refill Assorted: pink, orange, green and yellow Writing length 375 metres Wallet of 4

Read more less

Premium metal clip and chrome-plated nose cone for contemporary look. Comfortable rubber grip Fully retractable sleeve helps prevent damage to bags and pockets. Three strong #2 HB leads and an eraser. 0.7mm.  

Read more less

PaintBlock Technology, which forms a micro-barrier that seals the edges of the tape, to prevent paint bleed. The result is very sharp paint lines and less time spent on touch-ups. FrogTape Multi-Surface is a medium adhesion painters tape designed for use on: Cured painted walls: Wood trim: Glass: Metal FrogTape Multi-surface will remove cleanly from most surfaces for up to 21 days and seven days in direct sunlight.

Read more less

Really useful boxes are perfect for storing consumables, accessories and other equipment for transport to and from set. Additionally it can keep your camera truck organised. Additional Suggested uses: A4 Files / Box Files Camera Equipment  Chalk / Tape Dimensions: External: 710 x 440 x 310 Internal: 605 x 370 x 280(length x width x depth in mm) Weight 3,100g

Read more less

50 Pre-soaked wipes, ready to use any time anywhere. Great for removing oil, grease and grime from tools and machinery. Also ideal for removing grease and grime from hands, reducing skin dryness, improving hygiene. A portable wiper that cleans and protects, with a rough side to scrub off dirt and a smooth side to clean and finish.

Read more less