The Spares Set for ME2 Lav Concealer contains 6 full sets of metalwork replacements for The Lav Concealer for Sennheiser ME2. A 'set' of metalwork consists of a metal Fabric Guard and a metal Clothing Clip. The Spares Set has 3 x silver sets (for white Lav Concealers) and 3 x black sets (for Black Lav Concealers), making 6 sets in total.

Read more less

The Spares Set for ME2-II Lav Concealer contains 6 full sets of metalwork replacements for The Lav Concealer for Sennheiser ME2-II  A 'set' of metalwork consists of a metal Fabric Guard and a metal Clothing Clip. The Spares Set has 3 x silver sets (for white Lav Concealers) and 3 x black sets (for Black Lav Concealers), making 6 sets in total.

Read more less

The URSA MiniMounts are a slim, low-profile mount designed to be rigged where larger mounts cannot go. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. This MiniMount is deigned to fit the Shure TwinPlex. MiniMounts are are available in three colours. Black, Beige, and White. There are seven models available, They are designed specifically for the Deity W.Lav Pro, DPA 4060, 4071, 6060, 4660HD, RODE LAV/LAVii, Sanken COS11, Sennheiser MKE1 & MKE2, ME2, Shure Twinplex and Sony ECM-V1. More About URSA MiniMounts Easy to rig beside buttons on shirts where larger mounts will not fit! Their thin shape makes them perfect mounts for rigging on the skin in the cleavage or onto the bra. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. MiniMounts are moulded from hardened plastic. They won t snap under pressure or deform under heat. Each MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11 x 22mm and are designed specifically for MiniMounts. Our MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 11m wide x 22mm long x 6mm tall. Our 6060 & MKE1 measure 9.5m wide, 20mm long x 5mm tall. The DPA 4060 model also fits a CountryMan B3 with a Cap. The MKE1 model also fits a Countryman B6. The MKE1 & MKE2 models are designed to be used WITHOUT caps on the mics. This allows the mount to be as small as possible. Made for: Shure TwinPlex

Read more less

The URSA MiniMounts are a slim, low-profile mount designed to be rigged where larger mounts cannot go. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. This MiniMount is deigned to fit the Sennheiser ME2 MiniMounts are are available in three colours. Black, Beige, and White. There are seven models available, They are designed specifically for the Deity W.Lav Pro, DPA 4060, 4071, 6060, 4660HD, RODE LAV/LAVii, Sanken COS11, Sennheiser MKE1 & MKE2, ME2, Shure Twinplex and Sony ECM-V1. More About URSA MiniMounts Easy to rig beside buttons on shirts where larger mounts will not fit! Their thin shape makes them perfect mounts for rigging on the skin in the cleavage or onto the bra. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. MiniMounts are moulded from hardened plastic. They won t snap under pressure or deform under heat. Each MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11 x 22mm and are designed specifically for MiniMounts. Our MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 11m wide x 22mm long x 6mm tall. Our 6060 & MKE1 measure 9.5m wide, 20mm long x 5mm tall. The DPA 4060 model also fits a CountryMan B3 with a Cap. The MKE1 model also fits a Countryman B6. The MKE1 & MKE2 models are designed to be used WITHOUT caps on the mics. This allows the mount to be as small as possible. Made for: Sennheiser ME2

Read more less

The URSA MiniMounts are a slim, low-profile mount designed to be rigged where larger mounts cannot go. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. This MiniMount is deigned to fit the DPA 4660. MiniMounts are are available in three colours. Black, Beige, and White. There are seven models available, They are designed specifically for the Deity W.Lav Pro, DPA 4060, 4071, 6060, 4660HD, RODE LAV/LAVii, Sanken COS11, Sennheiser MKE1 & MKE2, ME2, Shure Twinplex and Sony ECM-V1. More About URSA MiniMounts Easy to rig beside buttons on shirts where larger mounts will not fit! Their thin shape makes them perfect mounts for rigging on the skin in the cleavage or onto the bra. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. MiniMounts are moulded from hardened plastic. They won t snap under pressure or deform under heat. Each MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11 x 22mm and are designed specifically for MiniMounts. Our MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 11m wide x 22mm long x 6mm tall. Our 6060 & MKE1 measure 9.5m wide, 20mm long x 5mm tall. The DPA 4060 model also fits a CountryMan B3 with a Cap. The MKE1 model also fits a Countryman B6. The MKE1 & MKE2 models are designed to be used WITHOUT caps on the mics. This allows the mount to be as small as possible. Made for: DPA 4660

Read more less

The URSA MiniMounts are a slim, low-profile mount designed to be rigged where larger mounts cannot go. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. This MiniMount is deigned to fit the Sony ECM V1. MiniMounts are are available in three colours. Black, Beige, and White. There are seven models available, They are designed specifically for the Deity W.Lav Pro, DPA 4060, 4071, 6060, 4660HD, RODE LAV/LAVii, Sanken COS11, Sennheiser MKE1 & MKE2, ME2, Shure Twinplex and Sony ECM-V1. More About URSA MiniMounts Easy to rig beside buttons on shirts where larger mounts will not fit! Their thin shape makes them perfect mounts for rigging on the skin in the cleavage or onto the bra. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. MiniMounts are moulded from hardened plastic. They won t snap under pressure or deform under heat. Each MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11 x 22mm and are designed specifically for MiniMounts. Our MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 11m wide x 22mm long x 6mm tall. Our 6060 & MKE1 measure 9.5m wide, 20mm long x 5mm tall. The DPA 4060 model also fits a CountryMan B3 with a Cap. The MKE1 model also fits a Countryman B6. The MKE1 & MKE2 models are designed to be used WITHOUT caps on the mics. This allows the mount to be as small as possible. Made for: Sony ECM V1 Dimensions: 22 x 11 x 6mm

Read more less

MOUNTING A LavALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. This Lav Concealer fits the Deity W.Lav Pro, the lavalier included in the Deity Theos System. Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape Price reduced as packaging has been opened. All pieces above pieces are still included.

Read more less

TAKE YOUR FIELD RECORDINGS TO THE NEXT LEVEL WITH THE WINDKILLER SE FOR PORTABLE RECORDERSThe Windkiller SE (Special Edition) wind protection for portable recorders combines Bubblebee Industrie's finest quality fur, design and manufacturing standards to effectively protect your field recordings against wind noise. On the outside, The Windkiller SE windshield features high-density, soft, multi-pile fur to gradually slow the wind down before reaching your mic. Inside, The Windkiller SE windshield uses a soft and smooth, open material, allowing the mic to sound as transparent as possible, while protecting your recordings against harmful wind noises. This is the ideal windshield for improving wind protection on field recorders like the Sony PCM-D100 and similar, Zoom H4n and H1, H2, including the new Zoom Essential range, Tascam DR-100, Olympus field recorders and many more! See the full compatibility list Size Guide here. The Windkiller SE can be affixed to the base of your portable recorders mic capsule(s) using an elasticated drawstring, while the leather band securely grips your portable/handheld recorder to keep the windshield in place and prevent wind from entering through the base, providing enhanced wind protection. The Windkiller SE has been designed with an elasticated drawstring, encased in a soft leather band to securely grip your portable recorder to keep the windshield firmly in place and prevent wind from entering through the base. The base of The Windkiller SE should sit at the top of your recorder, allowing clear visibility of your recorders LCD display and accessibility to any controls or buttons on the side of your portable recorder. FEATURES: Available in four sizes to fit the most widely available portable recorders on the market. Uses their much-loved, multi-pile fur for the ultimate protection against wind noise. Transparent inner fabric maintains a very natural frequency response. Includes an aerated mesh carry case. Manufactured in Denmark with quality and comfort in mind by sound lovers, for sound lovers. HOW TO FIT THE WKSE WINDSHIELD Loosen the drawstring all the way and pull The Windkiller SE over the top part of the body of your portable recorder. Tighten the drawstring to ensure the leather band is seated snugly around the body, below the built-in microphone diaphragm(s). When fitted correctly, The Windkiller SE holds a bubble of dead air around the mic capsule, allowing the microphone to function as naturally as possible and minimising wind interference in your recordings. PORTABLE RECORDER WKSE SIZE GUIDE XS - ∅ 32mm - 46mm (BBI-WKSE-PR-XS) S - ∅ 36mm - 65mm (BBI-WKSE-PR-S) M - ∅ 52mm - 65mm (BBI-WKSE-PR-M) L - ∅ 55mm - 71mm (BBI-WKSE-PR-L) <iframe width="560" height="315" src="https://www.youtube.com/embed/qzqKdetZInE?si=rQWLDKje8oywpW9d" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>

Read more less

The URSA MiniMounts are a slim, low-profile mount designed to be rigged where larger mounts cannot go. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. This MiniMount is deigned to fit the DPA 2061. MiniMounts are are available in three colours. Black, Beige, and White. There are seven models available, They are designed specifically for the Deity W.Lav Pro, DPA 4060, 4071, 6060, 4660HD, RODE LAV/LAVii, Sanken COS11, Sennheiser MKE1 & MKE2, ME2, Shure Twinplex and Sony ECM-V1. More About URSA MiniMounts Easy to rig beside buttons on shirts where larger mounts will not fit! Their thin shape makes them perfect mounts for rigging on the skin in the cleavage or onto the bra. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. MiniMounts are moulded from hardened plastic. They won t snap under pressure or deform under heat. Each MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11 x 22mm and are designed specifically for MiniMounts. Our MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 11m wide x 22mm long x 6mm tall. Our 6060 & MKE1 measure 9.5m wide, 20mm long x 5mm tall. The DPA 4060 model also fits a CountryMan B3 with a Cap. The MKE1 model also fits a Countryman B6. The MKE1 & MKE2 models are designed to be used WITHOUT caps on the mics. This allows the mount to be as small as possible. Made for: DPA 2061 Dimension: 20 x 9.5 x 5mm

Read more less

URSA Mini Sticky Circles, measuring 15mm in diameter and just 0.4mm thick, are ultra-low-profile and nearly invisible. Made with certified hypoallergenic adhesive, they’re safe for use directly on the skin. Plus, they won’t leave residue on fabrics and peel off easily without tearing. Each Mini Sticky Circle comes with a convenient peel-off tab for quick application. They work seamlessly with URSA Circular MiniMounts for the DPA 6060, and attaching LAV mics directly to the skin or costume due to their small diameter. Included are 90 pre-cut 15mm Sticky Circles in each pack, designed for dependable mic positioning. MiniMounts are sold separately.

Read more less

MOUNTING A LAVALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. The first of its kind for the Shure TwinPlex, this innovative mic mount fits the capsules for Shure TwinPlex models TL45, TL46, and TL47 perfectly. Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape

Read more less

MOUNTING A LavALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. Compatible with Countryman B3 lavalier microphone. Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape

Read more less

MOUNTING A LavALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. Compatible with Countryman B6 lavalier microphone. Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape

Read more less

MOUNTING A LavALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. Compatible with DPA 4071 lavalier microphone. Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape

Read more less

MOUNTING A LavALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. Compatible with Sennheiser MKE-1 lavalier microphone. Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape

Read more less

URSA MiniMounts are a slim, low-profile mount designed to be rigged where larger mounts cannot go. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. This MiniMount is deigned to fit the Sennheiser MKE1 MiniMounts are are available in four colours. Black, Brown, Beige, White. There are seven models available, They are designed specifically for the Deity W.Lav Pro, DPA 4060, 4071, 6060, 4660HD, RODE LAV/LAVii, Sanken COS11, Sennheiser MKE1 & MKE2, ME2, Shure Twinplex and Sony ECM-V1. More About URSA MiniMounts Easy to rig beside buttons on shirts where larger mounts will not fit! Their thin shape makes them perfect mounts for rigging on the skin in the cleavage or onto the bra. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. MiniMounts are moulded from hardened plastic. They won t snap under pressure or deform under heat. Each MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11 x 22mm and are designed specifically for MiniMounts. Our MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 11m wide x 22mm long x 6mm tall. Our 6060 & MKE1 measure 9.5m wide, 20mm long x 5mm tall. The DPA 4060 model also fits a CountryMan B3 with a Cap. The MKE1 model also fits a Countryman B6. The MKE1 & MKE2 models are designed to be used WITHOUT caps on the mics. This allows the mount to be as small as possible. Made for: Sennheiser MKE1 Dimension: 20 x 9.5 x 5mm Notes: Use without a cap. Works with: Countryman B6, Deity W.Lav Micro

Read more less

The URSA MiniMounts are a slim, low-profile mount designed to be rigged where larger mounts cannot go. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. This MiniMount is deigned to fit the DPA 4071. MiniMounts are are available in four colours. Black, Brown, Beige, White. There are seven models available, They are designed specifically for the Deity W.Lav Pro, DPA 4060, 4071, 6060, 4660HD, RODE LAV/LAVii, Sanken COS11, Sennheiser MKE1 & MKE2, ME2, Shure Twinplex and Sony ECM-V1. More About URSA MiniMounts Easy to rig beside buttons on shirts where larger mounts will not fit! Their thin shape makes them perfect mounts for rigging on the skin in the cleavage or onto the bra. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. MiniMounts are moulded from hardened plastic. They won t snap under pressure or deform under heat. Each MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11 x 22mm and are designed specifically for MiniMounts. Our MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 11m wide x 22mm long x 6mm tall. Our 6060 & MKE1 measure 9.5m wide, 20mm long x 5mm tall. The DPA 4060 model also fits a CountryMan B3 with a Cap. The MKE1 model also fits a Countryman B6. The MKE1 & MKE2 models are designed to be used WITHOUT caps on the mics. This allows the mount to be as small as possible. Made for: DPA 4071 Dimension: 22 x 11 x 6mm

Read more less

The Regular Spares Set for The Lav Concealer contains 6 full sets of metalwork replacements for your regular 'square' format Lav Concealers; ie. Like the Lav Concealer for Cos-11, DPA 4060, 4071 or RØDE Lavalier, B3, MKE 2, W.Lav Pro, ECM-77 etc. A 'set' of metalwork consists of a Fabric Guard, Fabric Guard Extreme and a Clothing Clip. The Spares Set has 3 x silver sets (for white Lav Concealers) and 3 x black sets (for Black Lav Concealers), making 6 full sets in total.

Read more less

The Tiny Spares Set for The Lav Concealer contains 6 full sets of metalwork replacements for your tiny 'subminiature' format Lav Concealers; ie. Like the Lav Concealer for DPA 6060. MKE1, B6, W.Lav Micro A 'set' of metalwork consists of one big metal Fabric Guard, one small metal Fabric Guard and a metal Lock piece. The Spares Set has 3 x silver sets (for white Lav Concealers) and 3 x black sets (for Black Lav Concealers), making 6 sets (18pcs) in total.

Read more less