This exhibition Double Sided Tape is designed and manufactured for use at events and exhibitions. A differential adhesive system ensures carpets are cleanly peeled from exhibition floors.
With its design comes a two-strength adhesive. On the open side, a medium-tak adhesive allows good 'grab' on a variety of clean dry surfaces and, most importantly, maintains excellent 'clean peel' properties.
• Low-tak peelable adhesive* (open side – exposed as you peel off the roll)• High-tak permanent adhesive (closed side – under release liner)• Two-Strength Adhesive
Applications and Industries• Temporary floor coverings• Exhibitions & conferences• Loose lay vinyl floor installations
This tape used to have 'N.E.C APPROVED' printed on the tape, however as this tape is no longer approved for use in the NEC properties, it is now unprinted. It is not approved or associated with the NEC Group. All trademarks are the property the NEC Group.
This not the new 'blue' tape.
RoboCup Holster is our version of a "Mini Front Box" and is another exciting add-on accessory for the RoboCup that securely holds your pens, keys, wallet, phones, tools and much more. In the storage area, there's a charging port slot which has been carefully designed and also a tiny drain hole. The 6 tool slots are reinforced for durability and sized for carabiners, scissors, hex keys, pliers and screwdrivers. For convenient viewing, a smartphone or tablet can be leaned against the Holster.
Attach using the provided two straps and tighten snugly to secure. Remove all existing straps from the RoboCup before attaching the Holster. The position of the Holster can be swivelled around the RoboCup for ideal placement. The Holster can also be placed on a desk or strapped onto most tubes.
For a more permanent attachment (not provided), use a stainless steel hose clamp for the top strap but be sure to not over-tighten and use a plastic cable-tie for the bottom strap.
Built with a robust thick wall design with UV-stabilizers added for longevity. Backed by a “no-hassle” 3-year warranty.
*Robocup sold separately.
YOUR LAVALIER MIC'S BEST FRIEND ON WINDY DAYS
The Bubblebee Windbubble consists of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing. And this 'nothing' is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside.
So instead of the wind hammering on the microphone and making those horrible, “I’m in the middle of a hurricane,” sounds, the capsule is kept in a calm space and allowed to perform at its best.
Each package contains two identical Windbubbles.
WINDBUBBLE FEATURES:
WORLD-RENOWNED PROTECTION FROM WINDBest in the industry wind protection thanks to the bubble-effect in the design. The construction of the Windbubble holds a quiet space around the mic capsule, allowing it to perform its duties in the best way possible and delivering detailed and natural sound to your transmitter or recorder.
WINDBUBBLES WON'T FALL OFFThey are built to stay safe and secure on your Lavalier microphone, with a tight fitting opening aperture - hence the four available sizes.
CHOOSE YOUR SIZEAvailable in four different sizes for over 50 popular lavalier mics. Please consult our Size Guide to check this.
CHOOSE YOUR COLOURAvailable in six different colours of high quality Bubblebee fur to make it easier to find a Windbubble for every occasion.
NATURAL SOUNDOur fur and mesh construction makes The Windbubble acoustically transparent to keep the sound very close to the microphones natural frequency response.
MULTI-PILE FURThe short, dense hair of the fur gives the Windbubble a rounded and organic shape while the longer fur slows wind down gradually for quieter wind protection.
NATURAL COLOURSThe Bubblebee fur is less shiny to blend better with skin, clothes and other surrounding materials.
QUALITY YOU CAN TRUSTDesigned in Denmark by sound lovers, for sound lovers!
MOUNT THE WINDBUBBLE WITH CONFIDENCE
The Windbubbles are specially constructed to be mounted quickly and easily on your specified type of microphones and to not fall off during use. To this end, the fit can be fairly tight around the base of the capsule. The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphone, by locating the hole easily. If the lav capsule is on the larger side, you can practise mounting the Windbubble on the tapered end of a ball-point pen as this helps get a feel for it.
It is important that you check the correct size(s) suitable for your lavalier microphone. Please consult our Size Guide to check this.
Size 1 - Built for microphones with a diameter of 3,0-4,0 mmElastic opening circumference: 28 mm (1.10”)For Example:Sanken COS-11 (without metal windscreen)Countryman B6, B2D, E6Sennheiser MKE 1Sony ECM-90DPA 6060
Size 2 - Built for microphones with a diameter of 5,0-8,0 mm:Elastic opening circumference: 35 mm (1.38”)For Example:Sanken COS-11 (without metal windscreen)Countryman B3DPA 4060Sennheiser MKE 2, ME2, ME2-US (without windscreen), ME2-IILOM Mikro Uši
Size 3 - Built for microphones with a diameter of 5,0-9,0 mm:Elastic opening circumference: 40 mm (1.57”)For Example:Sanken COS-11 (with metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II
Size 4 - Built for microphones with a diameter of 8,0-13,0 mm:Elastic opening circumference: 42 mm (1.65”)For Example:Sanken COS-11 (with large metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)LOM Uši Pro
YOUR LAVALIER MIC'S BEST FRIEND ON WINDY DAYS
The Bubblebee Windbubble consists of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing. And this 'nothing' is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside.
So instead of the wind hammering on the microphone and making those horrible, “I’m in the middle of a hurricane,” sounds, the capsule is kept in a calm space and allowed to perform at its best.
WINDBUBBLE FEATURES:
WORLD-RENOWNED PROTECTION FROM WINDBest in the industry wind protection thanks to the bubble-effect in the design. The construction of the Windbubble holds a quiet space around the mic capsule, allowing it to perform its duties in the best way possible and delivering detailed and natural sound to your transmitter or recorder.
WINDBUBBLES WON'T FALL OFFThey are built to stay safe and secure on your Lavalier microphone, with a tight fitting opening aperture - hence the four available sizes.
CHOOSE YOUR SIZEAvailable in four different sizes for over 50 popular lavalier mics. Please consult our Size Guide to check this.
CHOOSE YOUR COLOURAvailable in six different colours of high quality Bubblebee fur to make it easier to find a Windbubble for every occasion.
NATURAL SOUNDOur fur and mesh construction makes The Windbubble acoustically transparent to keep the sound very close to the microphones natural frequency response.
MULTI-PILE FURThe short, dense hair of the fur gives the Windbubble a rounded and organic shape while the longer fur slows wind down gradually for quieter wind protection.
NATURAL COLOURSThe Bubblebee fur is less shiny to blend better with skin, clothes and other surrounding materials.
QUALITY YOU CAN TRUSTDesigned in Denmark by sound lovers, for sound lovers!
MOUNT THE WINDBUBBLE WITH CONFIDENCE
The Windbubbles are specially constructed to be mounted quickly and easily on your specified type of microphones and to not fall off during use. To this end, the fit can be fairly tight around the base of the capsule. The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphone, by locating the hole easily. If the lav capsule is on the larger side, you can practise mounting the Windbubble on the tapered end of a ball-point pen as this helps get a feel for it.
WHAT'S INCLUDED: Each package contains 1x Windbubble
It is important that you check the correct size(s) suitable for your lavalier microphone. Please consult our Size Guide to check this.
Size 1 - Built for microphones with a diameter of 3,0-4,0 mmElastic opening circumference: 28 mm (1.10”)For Example: Sanken COS-11 (without metal windscreen)Countryman B6, B2D, E6Sennheiser MKE 1Sony ECM-90DPA 6060
Size 2 - Built for microphones with a diameter of 5,0-8,0 mm:Elastic opening circumference: 35 mm (1.38”)For Example: Sanken COS-11 (without metal windscreen)Countryman B3DPA 4060Sennheiser MKE 2, ME2, ME2-US (without windscreen), ME2-IILOM Mikro Uši
Size 3 - Built for microphones with a diameter of 5,0-9,0 mm:Elastic opening circumference: 40 mm (1.57”)For Example: Sanken COS-11 (with metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II
Size 4 - Built for microphones with a diameter of 8,0-13,0 mm:Elastic opening circumference: 42 mm (1.65”)For Example:Sanken COS-11 (with large metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)LOM Uši Pro
Micro Windjammer
Rycote has been making Windjammers for professional broadcasters and film-makers for over four decades and are recognised as the industry-standard for wind protection products.
These days even the smallest compact cameras allow you to shoot great, high-quality video but if you've ever tried filming outdoors on even a mildly blustery day, you'll know that the wind can wreck your perfectly composed soundtrack in a matter of seconds!Our fantastic Micro Windjammer is easy to fit and provides all-in-one wind protection for your camera's built-in microphone helping you to capture great sounding audio, even outdoors.
Designed to help prevent wind noise from destroying the audio recording from your HDSLR camera, camcorder or compact digital camera, the Rycote Micro Windjammer is also compatible with the IPhone, IPad and most other mobile phones.
This invaluable piece of kit for all your outdoors recordings is handy, easy to fit and leaves no residue on removal.Made by Rycote in the UK. Each individual pack contains 30 Stickies and 6 reusable grey fur discs.
Main Benefits:
Micro Windjammer provides versatile wind protection for the built-in microphones on a range of devices
Fits over the built-in microphone on DSLR cameras, camcorders and compact cameras
Compatible with iPhone, iPad and most other mobile phones and tablets
Greatly reduces wind noise, to help you to capture great audio, to go with your video
An invaluable piece of kit for your outdoor recordings great for improving the sound quality of vlogs and YouTube videos
Handy, easy to fit, easy to remove and leaves no residue
Each individual pack contains 30 Stickies and 6 reusable grey fur discs
Letter Stencils (Pack of 4 sizes)
This pack of lettering stencils by Anker includes assorted sizes and colours for every purpose. Add a unique and personalised feel to all of your letters, notes, stationery and more, whilst also achieving a professional finish with no smudging. The plastic stencils can be paired with pencils, markers and paint effortlessly wipe away any marks and splodges after using. An essential for any child who loves arts and crafts, the stencils will also help to teach them about letters and numbers.
For a neat and professional finish, use these Anker lettering stencils for perfect lines which will look like they have been printed.
Personalise your stationery, letters and art projects with these stencils, your words will really stand out and impress your friends.
An essential item for any art and craft box, the stencils come in assorted colours and sizes, making a brilliant gift for every child.
Ideal for sign writing, card making and labelling your personal items, the stencils are also an excellent tool for literacy and maths
*B-STOCK *
*Tape has been wound onto the core a bit wonky due to manufacturing error but stills performs as normal*
Premium-Grade, Eco-Conscious Matt Gaffer Tape for Professionals.
Trusted by crews across film, TV, theatre, and live events, NRG Non-Reflective Gaffer Tape delivers outstanding performance. Designed for temporary fixes, labelling, floor marking, talent marks, and securing cables, this tape offers exceptional adhesion with easy, residue-free removal*.
Made from 100% natural cotton cloth (120 mesh) and bonded with a 100% natural rubber adhesive, NRG Gaffer Tape is a sustainable choice that doesn’t compromise on performance. Its non-reflective matte finish and write-on surface make it a go-to essential for fast-paced production environments where gaffers tape performance and reliability is key.
Key Features:
✅ Professional-grade matte finish – non-reflective and camera-ready
✅ High-performance natural adhesive – strong hold, clean removal*
✅ Residue-free on most clean surfaces*
✅ Smooth, controlled unwind – for consistent, stress-free use
✅ Hand-tearable – no scissors or knives needed
✅ Highly conformable – adheres to irregular or curved surfaces
✅ Abrasion-resistant – withstands wear in high-traffic areas
✅ Weather-resistant – ideal for short-term outdoor use
Eco Credentials:
♻️ 100% natural cotton cloth
🌱 100% natural rubber adhesive
🌿 Plant-based inks and dyes
🚫 Free from harmful chemicals
🌍 Reduced carbon footprint
📦 Recyclable cardboard core
Application Tips:
For best results, apply only to clean, dry, smooth, and non-porous surfaces, and avoid prolonged exposure to UV or direct sunlight. Make sure surfaces are free from oil, dust, or moisture to ensure optimal adhesion.
Storage:
Store in a cool, dry place, away from sunlight and extreme temperatures.
*Residue-free performance depends on surface type, conditions, and duration of application.
A WINDBUBBLE DREAM TEAM FOR YOUR CONVENIENCE...
Each package contains 1 black, 1 grey, 1 brown and 1 white Windbubble.
The Windbubbles are build to stay safe and secure on the microphone, and therefore comes in four different sizes.
The frequency through the Windbubble is very close to the microphones natural sound.
The wind reduction is the best in the industry, thanks to the bubble-effect in the design.
The fur is less shiny to blend better with skin, clothes and other surroundings.
Designed in Denmark by sound lovers, for sound lovers.
The Bubblebee Windbubbles consist of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing.
And this nothing is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside.
So instead of the wind hammering on the microphone and making those horrible "I’m in the middle of a hurricane"- sounds, it passes right through.
The Windbubbles are specially constructed to be mounted quickly and easily on the specified types of microphone and to not fall off during use.
The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphones.
CHOOSE THE CORRECT SIZE
It is important that you check the correct size(s) suitable for your lavalier microphone. Please consult our Size Guide to check this.
Size 1 - Built for microphones with a diameter of 3,0-4,0 mmElastic opening circumference: 28 mm (1.10”)For Example:Sanken COS-11 (without metal windscreen)Countryman B6, B2D, E6Sennheiser MKE 1Sony ECM-90DPA 6060
Size 2 - Built for microphones with a diameter of 5,0-8,0 mm:Elastic opening circumference: 35 mm (1.38”)For Example:Sanken COS-11 (without metal windscreen)Countryman B3DPA 4060Sennheiser MKE 2, ME2, ME2-US (without windscreen), ME2-IILOM Mikro Uši
Size 3 - Built for microphones with a diameter of 5,0-9,0 mm:Elastic opening circumference: 40 mm (1.57”)For Example:Sanken COS-11 (with metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II
Size 4 - Built for microphones with a diameter of 8,0-13,0 mm:Elastic opening circumference: 42 mm (1.65”)For Example:Sanken COS-11 (with large metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)LOM Uši Pro
NEVER CHANGE A WINNING TEAM...
Each package contains of 3 black, 2, white, 2 grey, 1 brown, 1 off-white and 1 beige Windbubble
The Windbubbles are build to stay safe and secure on the microphone, and therefore comes in four different sizes.
The frequency through the Windbubble is very close to the microphones natural sound.
The wind reduction is the best in the industry, thanks to the bubble-effect in the design
The short hair of the fur gives the Windbubble a more rounded and organic shape.
The fur is less shiny to blend better with skin, clothes and other surroundings.
Available in six different colours make is easier to find a Windbubble for every occasion.
Designed in Denmark by sound lovers, for sound lovers.
The Bubblebee Windbubbles consist of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing.
And this nothing is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside.
So instead of the wind hammering on the microphone and making those horrible “I’m in the middle of a hurricane”- sounds, it passes right through.
The Windbubbles are specially constructed to be mounted quickly and easily on the specified types of microphone and to not fall off during use.
The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphones.
It is important that you check the correct size(s) suitable for your lavalier microphone. Please consult our Size Guide to check this.
Size 1 - Built for microphones with a diameter of 3,0-4,0 mmElastic opening circumference: 28 mm (1.10”)For Example:Sanken COS-11 (without metal windscreen)Countryman B6, B2D, E6Sennheiser MKE 1Sony ECM-90DPA 6060
Size 2 - Built for microphones with a diameter of 5,0-8,0 mm:Elastic opening circumference: 35 mm (1.38”)For Example:Sanken COS-11 (without metal windscreen)Countryman B3DPA 4060Sennheiser MKE 2, ME2, ME2-US (without windscreen), ME2-IILOM Mikro Uši
Size 3 - Built for microphones with a diameter of 5,0-9,0 mm:Elastic opening circumference: 40 mm (1.57”)For Example:Sanken COS-11 (with metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II
Size 4 - Built for microphones with a diameter of 8,0-13,0 mm:Elastic opening circumference: 42 mm (1.65”)For Example:Sanken COS-11 (with large metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)LOM Uši Pro
With four targets and software, ColorChecker Passport Photo 2 includes all you need for exposure control, white balance, camera profiling, and creative enhancements, from capture to edit.
The journey to colour perfection starts with a Passport!One passport. A world of colourful creative places to explore.The art of colour management is all about getting your colours to match from input to output; meaning your camera captures true colours, your monitor displays them accurately, and your printer produces a photo that matches what you see on screen. With a combination of targets and camera calibration software, the portable ColorChecker Passport Photo 2 delivers professional-quality colour control for a perfect colour journey.
Created by Color Perfectionists for Color PerfectionistsDesigned by engineers with more colour science experience than anyone in the industry, ColorChecker Passport Photo 2 is an indispensable tool for photographers. If you are looking for accurate, consistent colour and creative flexibility, it can help you capture the colours of the world more perfectly and ensure you are editing the most accurate files possible.
Four Targets in an Adjustable, Protective, Pocket-Sized Case
Gray Balance Target to set exposure with an in-camera or handheld meter.
White Balance Target to create custom in-camera white balance for a consistent white point across a set of images with no need to correct each individual image later.
Classic Target, the industry-standard 24-patch colour reference target for creating custom camera profiles and for visual colour assessments.
Creative Enhancement Target to neutralize and create your look with enhancement patches, check and evaluate shadow details and highlight clipping, and control colour shifts.
Custom DNG and/or ICC Camera ProfilesColorChecker Passport Photo 2 also includes camera calibration software to create custom camera profiles based on your individual camera/lens/lighting combinations for both DNG and ICC workflows, and a Lightroom® Plug-In to create custom camera profiles directly in Adobe® Lightroom® Classic and Lightroom® Classic CC. ColorChecker Classic target is supported by third party software solutions, including Hasselblad Phocus, Black Magic DaVinci Resolve, and 3D LUT Creator.
Model #: MSCCPP-B
360° Vector Valve rotates 360 degrees with a 180-degree vertical orientation. Provides amazing range and versatility. One-of-a-kind nozzle allows you to keep duster upright while delivering a cleaning blast to difficult-to-reach areas.
Super-Light Touch Screen Compatibility.
Almost unnoticeable at only 40g per glove* the Comfort Fit 0.5 allows you to work comfortably with an incredibly light and flexible barrier. Feel through the glove with incredible dexterity and virtually unrestricted movement thanks to a durable one-piece synthetic leather palm. Fully equipped with Dirty Rigger double-stitched seams, Airprene knuckle padding and breathable glove back, the 0.5 provides exceptional performance for general tasks.
Lightweight high-dexterity glove
Durable one-piece synthetic leather palm
Low profile black-out design
Interact touch-screen compatible technology
Airprene knuckle padding
Double-stitched seams
*Weight per glove in Medium size. Weights may vary for other sizes.
This glove is intended for general use. If your work is more demanding or requires a specific PPE rating, a glove from our Heavy Duty range may be more suitable.
Impact resistant plastic for strength and durability
Non-slip, weighted base for one handed use
Suitable for rolls of tape up to 19mm wide and 33m long
Colour: Black
THE ANSWER TO YOUR PRAYERS IN COMPACT WIND PROTECTION...
Made for your boom or camera microphone.
Handles medium to mild wind.
Made from the best imitation fur (high amount of hair pieces per cm2) which allows for optimal wind protection versus frequency transparency.
Specially designed rubber base for super easy and secure mounting.
When wet, simply dry it up and shake the fur back into a perfect shape.
Designed in Denmark by sound lovers, for sound lovers.
The Windkiller is a short-haired wind protector that fits shotgun microphones from Audio-Technica, Audix, DPA, JVC, Neumann, Røde, Sanken, Schoeps, Sennheiser, Sony and others. See Chart.
The core of the Windkiller consists of high quality coarse foam with Bubblebee’s carefully chosen soft and fluffy imitation fur on top. This faux-fur is highly durable, works excellent to block the wind and is aesthetically pleasing for the eye.
In the bottom, The Windkiller is constructed with our specially designed rubber mount that grips unto your microphone while still making it perfectly easy to slide the Windkiller on and off.
The Windkiller comes in five different sizes, from XS to XL, all with an rubber opening in the bottom that fits shotgun microphones with a diameter of 18-24 mm (0.7”-0.9”).
THE BIG MOUNT
These come in XS and XL sizes with a rubber opening in the bottom that fits microphones with a wider diameter of 23-26 mm (0.9"-1,02").
There is 5 sizes and two big mount versions to cover all major variants of shotgun microphone:
Big Mount:
The Spacer Bubble, is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions.
The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A short-haired fur cover is available separately if you need it.
The Spacer Bubble is available in red, black, green and blue.
FEATURES:
Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh' and wind.
Specially designed rubber base for super easy and secure mounting.
Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible.
Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection.
Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally.
Available in seven different sizes - to ensure you find a size that perfectly fits your favourite shotgun mic.
Save valuable time while getting the best quality.
Practical mesh bag included for easy storage and fast mounting.
Designed in Denmark by sound lovers, for sound lovers.
The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom.
The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds.
When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready!
The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you're working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency.
WHAT’S INCLUDED:
1x The Spacer Bubble
1x The Long-Haired Spacer Cover
1x Mesh Storage Bag
WHICH SPACER BUBBLE SIZE?We offer five different lengths and two different mount sizes:
Weight XS:Mesh base: 40g (1,4oz)Long-haired slip on fur: 20g (0,7oz) Full weight w/ packaging: 260g (9,1oz)
Weight S:Mesh base: 50g (1,7oz)Long-haired slip on fur: 25g (0,8oz)Full weight w/ packaging: 275g (9,7oz)
Weight M:Mesh base: 55g (1,9oz) Long-haired slip on fur: 30g (1oz)Full weight w/ packaging: 290g (10,2oz)
Weight L:Mesh base: 60g (2,1oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 300g (10,5oz)
Weight XL:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging:305g (10,7oz)
Big Mount:
Weight XS Big Mount:Mesh base: 40g (1,4oz) Long-haired slip on fur: 20g (0,7oz)Full weight w/ packaging: 260g (9,1oz)
Weight XL Big Mount:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 305g1 (0,7oz)
Your 3rd Skin.
A raw grit workman's glove. Specially selected, double-layered goat skin hide creates an exceptional defence for the palm of your hands. A one-piece palm base combines with an articulated second layer to allow optimum freedom of movement as you work. Dirty Rigger select leather delivers a natural ability to resist friction, providing a barrier for your hands when working with rope, cables and staging. A lighter back on the glove minimises heat build-up and helps maintain a comfortable flow of air as you work.
Genuine leather palm
Ultra-durable, double-layered leather palm
Articulated second layer for freedom of movement (palm side)
Double stitched seams
Breathable glove back to relieve heat
Snug fit to minimise snagging
Write-on ID tag
This glove is currently undergoing PPE testing and should be considered suitable for general use in the meantime. For specific PPE requirements please refer to our specialised PPE range.
THE SOLUTION FOR YOUR HANDHELD MIC IN HEAVY WINDS...
• Fits all standard handheld microphones• For heavy wind• Stays in place on the microphone• Built with Imitation Fur• Reduces Wind Noise• Easy to Mount on Microphone• Designed in Denmark by sound lovers, for sound lovers
The Big Windbubble provides some of the best wind protection for handheld microphones on the market.
The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside. So instead of the wind hammering on the microphone and making those horrible “ I’m in the middle of a hurricane”- sounds, it passes right through.
The outside consists of carefully chosen black faux-fur that is soft, fluffy and even, and help make sure that you get the best possible results when recording outdoors.There is a smooth mesh lining underneath the fur and an elastic mount at the bottom, which makes it easy and secure to fit the Big Windbubble on all standard handheld microphones.
Height: 10 cm (3.9”). Diameter: 5.2 cm (2.0”) Weight: 100g (incl. packaging)
Long Haired Item code: BBI-BWB-BK
Short Haired Item code: BBI-BWB-BKS
THE CUB
Build for the Sanken CUB-01
Mounts easily with elastic band
Comes in black and in grey
Designed in Denmark by sound lovers, for sound lovers
A great microphone deserves great wind protection. That is why we developed and designed The Cub to fit just one microphone, the Sanken CUB-01.
The Cub has a wide elastic area that allows it to easily slide over the flat construction of the CUB-01 microphone. The elastic is topped with a “hat” made from the carefully chosen faux-fur that is also used for our well-known Windbubbles.
Each CUB comes in a practical metal box.
Height: 3.5 cm (1.3”), Diameter: 5 cm (1,9”).
Tipp-Ex Rapid Fluid with its unique foam applicator for precise and broad correction. Strokes on easily for all types of correction. Excellent coverage and fast drying time. Will not chip peel or crack non-ozone depleting.
Features
Tipp-Ex Rapid Fluid (White)
Size: 20ml
Unique foam applicator for precise and broad correction
Foam wedge applicator for clean and easy use - no clogging
Fast drying formula
Ideal for all types of paper correction
Will not chip, peel or crack
Non-ozone depleting
No stains or splashes
MOUNTING A LavALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER.
The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings.
These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style.
It can also be sewn into costumes by the costume department for daily repeated use.
This Lav Concealer fits the Deity W.Lav Pro, the lavalier included in the Deity Theos System.
Lav CONCEALER FEATURES
CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner.
SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule.
COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding.
WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule.
EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it.
CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets.
ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring.
The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule.
It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer.
WHAT’S INCLUDED:
1x Rubber Lav Concealer (Black/White)
1x Metal Clothing Clip (Black/Silver)
1x Wire Fabric Guard (Black/Silver)
1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models)
6x Lav Concealer Tape
Price reduced as packaging has been opened. All pieces above pieces are still included.
Super-Light Touch Screen Compatibility.
Almost unnoticeable at only 40g per glove* the Comfort Fit 0.5 allows you to work comfortably with an incredibly light and flexible barrier. Feel through the glove with incredible dexterity and virtually unrestricted movement thanks to a durable one-piece synthetic leather palm. Fully equipped with Dirty Rigger double-stitched seams, Airprene knuckle padding and breathable glove back, the 0.5 provides exceptional performance for general tasks.
Lightweight high-dexterity glove
Durable one-piece synthetic leather palm
Low profile black-out design
Interact touch-screen compatible technology
Airprene knuckle padding
Double-stitched seams
*Weight per glove in Medium size. Weights may vary for other sizes.
This glove is intended for general use. If your work is more demanding or requires a specific PPE rating, a glove from our Heavy Duty range may be more suitable.
