A WINDBUBBLE DREAM TEAM FOR YOUR CONVENIENCE...   Each package contains 1 black, 1 grey, 1 brown and 1 white Windbubble. The Windbubbles are build to stay safe and secure on the microphone, and therefore comes in four different sizes. The frequency through the Windbubble is very close to the microphones natural sound. The wind reduction is the best in the industry, thanks to the bubble-effect in the design. The fur is less shiny to blend better with skin, clothes and other surroundings. Designed in Denmark by sound lovers, for sound lovers. The Bubblebee Windbubbles consist of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing.  And this nothing is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside.  So instead of the wind hammering on the microphone and making those horrible "I’m in the middle of a hurricane"- sounds, it passes right through. The Windbubbles are specially constructed to be mounted quickly and easily on the specified types of microphone and to not fall off during use.  The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphones. CHOOSE THE CORRECT SIZE It is important that you check the correct size(s) suitable for your lavalier microphone. Please consult our Size Guide to check this. Size 1 - Built for microphones with a diameter of 3,0-4,0 mmElastic opening circumference: 28 mm (1.10”)For Example:Sanken COS-11 (without metal windscreen)Countryman B6, B2D, E6Sennheiser MKE 1Sony ECM-90DPA 6060 Size 2 - Built for microphones with a diameter of 5,0-8,0 mm:Elastic opening circumference: 35 mm (1.38”)For Example:Sanken COS-11 (without metal windscreen)Countryman B3DPA 4060Sennheiser MKE 2, ME2, ME2-US (without windscreen), ME2-IILOM Mikro Uši Size 3 - Built for microphones with a diameter of 5,0-9,0 mm:Elastic opening circumference: 40 mm (1.57”)For Example:Sanken COS-11 (with metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II Size 4 - Built for microphones with a diameter of 8,0-13,0 mm:Elastic opening circumference: 42 mm (1.65”)For Example:Sanken COS-11 (with large metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)LOM Uši Pro

Read more less

In the world of sound production, audio recordings or video content creation, hiding mics can present many challenges, such as clothing rustle, wind, or cable noise. The Mic Hiding Kit for Sennheiser ME 2-II is tailored for all needs; offering a selection of essential tools to discreetly conceal your Sennheiser ME 2-II lavalier mic for clear and professional-sounding audio. With this kit, you can try before you buy, ensuring you find the perfect solution for your needs. THE LAV CONCEALER FOR SENNHEISER ME 2-IIThis super soft, pliable mount is excellent at hiding your Sennheiser ME 2-II (Sennheiser G4, AVX, XSW-D or EW-D), whilst reducing any unwanted clothing noise and absorbing vibrations. It can be sewn, clipped on or taped to the talent or costume with the included accessories. The metal fabric guard ensures you keep an all-important space around the microphones capsule for optimal audio clarity, whilst the combination of the rubber and metal aides the reduction of vibration transference from the concealing layer of fabric to the microphone. This kit includes both black and white Lav Concealers for Sennheiser ME 2-II, allowing you to adapt the lapel mic mount to different costumes and fabrics.THE LAV CONCEALER TAPEDouble-sided hypoallergenic tape perfect for securely mounting The Lav Concealer to clothing or directly onto the skin. Ensuring reliable placement even where clips aren’t feasible, maintaining discreet microphone positioning. THE INVISIBLE SKIN TAPEBreathable and sweat proof, this tape offers a discreet low-profile solution for effortlessly managing your lavalier microphone cable. The matte, skin-like finish allows for easy makeup application, allowing you to discreetly conceal your lapel mic cable in plain sight. THE MIC ACCESSORY CASEProviding an organised, protective and robust solution for keeping all your Sennheiser ME 2-II Mic Hiding accessories together. The six different compartments and transparent material ensures separation of accessories, allowing for easy access. Please note that this is for the more recent ME 2-II (which now Sennheiser refer to as “ME 2”) mic which has a permanently affixed pop-shield.

Read more less

THIS ESSENTIAL TOOL FOR HIDING THE RØDE LAVALIER II MICROPHONE WILL REVOLUTIONISE YOUR VIDEO CONTENTIn audio recording and video production, concealing lapel microphones can be challenging due to issues like clothing rustle, wind, or cable noise. The Mic Hiding Kit is designed to address these challenges, providing a range of essential tools to discreetly hide your RØDE Lavalier II mic while achieving clear, professional audio. Our kit allows you to try the solutions before purchasing, helping you find the ideal option for your needs. Whether you are using the RØDE Lavalier II on its own, or have the RØDE Wireless PRO kit, The Mic Hiding Kit for RØDE Lavalier II has many tools carefully designed for help you make sound sound better. Whether you’re a seasoned location sound recordist, videographer, or content creator The Mic Hiding Kit for RØDE Lavalier II is the perfect accessory to help hide your lapel mic like a pro. FEATURES: - THE LAV CONCEALER FOR RODE LAVALIER II:This super soft, pliable mount is excellent at hiding your RØDE Lavalier II included in the RØDE wireless PRO kit, while reducing any unwanted clothing noise and absorbing vibrations. It can be sewn, clipped, or taped to the talent or costume with the included accessories. The metal fabric guard ensures you keep an all-important space around the microphones capsule for optimal audio clarity, whilst the combination of the rubber and metal aides the reduction of vibration transference from the concealing layer of fabric to the microphone. - THE LAV CONCEALER TAPE:Double-sided hypoallergenic tape perfect for securely mounting The Lav Concealer to clothing or directly onto the skin. Ensuring reliable placement even where clips aren’t feasible, maintaining discreet microphone positioning. - THE INVISIBLE LAV COVERS - FUR OUTDOOR:Designed to be discreet yet effective, our reusable faux Fur Outdoor covers are designed for use under clothes, ensuring the elimination of rustling and wind noises for clean audio recordings. - THE INVISIBLE LAV COVERS - MOLESKIN:Crafted using an eco-friendly bamboo material, allowing for the placement of lav mics on the skin or under clothes, effectively minimising friction noise whilst maintaining exceptionally discreet. - THE INVISIBLE LAV TAPE:Sticky double-sided hypoallergenic tape with a window to keep your mics capsule free from any glue residue. For use on its own or with all Invisible Lav Covers. - THE MIC ACCESSORY:Providing an organised, protective, and robust solution for keeping all your Mic Hiding Starter accessories together. The six different compartments and transparent material ensures separation of accessories, allowing for easy access. WHAT'S IN THE BOX? 1 x Lav Concealer for RØDE Lavalier II 6 x Lav Concealer Tape 3 x FUR-OUTDOOR - Invisible Lav Covers 6 x MOLESKIN - Invisible Lav Covers 9 x Invisible Lav Tape 5 x Invisible Skin Tape 1 x The Mic Accessory Case

Read more less

This essential tool for hiding the Røde Lavalier II microphone will revolutionise your video content.Enhance your video content and discreetly conceal your microphone like a pro with The Lav Concealer for the RØDE Lavalier II. The Lav Concealer for the RØDE Lavalier II is a versatile, discreet mount that easily adapts to different surfaces for a seamless fit. Crafted from soft rubber and precisely shaped for the RØDE Lavalier II, it pairs perfectly with the RØDE wireless PRO kit. Designed by Bubblebee Industries, this industry-leading lapel microphone mount reduces clothing noise and acts as a shock absorber, shielding the microphone from vibrations and friction for clearer, superior sound. All of this is achieved while keeping the microphone completely concealed. Available as a single Lav Concealer in either Black or White, or a 6-pack with 3 x black and 3 x white Lav Concealers. This Lav Concealer is a custom mount for the RØDE Lavalier II that fits the capsule snugly, making it easier to conceal the mic while protecting it from glue build-up caused by repeatedly taping directly to the mic. Like the RØDE Lavalier II, the Lav Concealer is designed to be ultra-low profile, sitting flush under clothing for discreet, professional-quality audio capture. It can be attached directly to skin or clothing using Lav Concealer Tape, which is strong, hypoallergenic, and easy to apply, ensuring secure mounting on fabric or skin without worry. The Lav Concealer is made from biodegradable natural rubber, offering an eco-friendly choice you can feel good about. The soft, flexible rubber excels at absorbing vibrations, outperforming harder materials like plastic, and reducing unwanted noise from reaching the lapel mic capsule. The Lav Concealer for RØDE Lavalier II also includes a colour-matched fabric guard and clothing clip made from sprung metal, which attach through small holes on the front and back of the concealer. The combination of rubber and metal works together to block friction and vibrations from transferring to the mic capsule, ensuring clearer sound. FEATURES: - CREATES SPACE:Prevents fabric from touching the RØDE Lavalier II capsule in confined spaces under or within clothing, protecting the lapel mic from friction noise and vibrations for cleaner, clearer recordings. - SHOCK ABSORBING:The moulded rubber concealer provides outstanding absorption of vibrations and friction, while the metal clothing clip and fabric guard blocks vibrations from passing through the concealer to the microphones capsule. - COLOUR OPTIONS:Available in matte black or matte white finish. The matte finish is non-reflective for discrete hiding. - WIRE FABRIC GAURD:The removable wire fabric guard prevents fabric from contacting the capsule. Together, the wire and rubber materials effectively absorb friction, preventing any transfer of friction to the mic capsule. - CLIP, TAPE, OR SEWN MOUNTING OPTIONS:Offers multiple quick and efficient mounting options for RØDE Lavalier II mics on talent, even in high-pressure on-set situations. - ENVIRONMENTALLY SOUND:The Lav Concealer is crafted from 100% natural, biodegradable rubber, making it environmentally friendly. Both the black and white versions are coloured without the use of harmful chemical compounds. WHAT'S IN THE BOX? his essential tool for hiding the Røde Lavalier II microphone will revolutionise your video content.Enhance your video content and discreetly conceal your microphone like a pro with The Lav Concealer for the RØDE Lavalier II. The Lav Concealer for the RØDE Lavalier II is a versatile, discreet mount that easily adapts to different surfaces for a seamless fit. Crafted from soft rubber and precisely shaped for the RØDE Lavalier II, it pairs perfectly with the RØDE wireless PRO kit. Designed by Bubblebee Industries, this industry-leading lapel microphone mount reduces clothing noise and acts as a shock absorber, shielding the microphone from vibrations and friction for clearer, superior sound. All of this is achieved while keeping the microphone completely concealed. Available as a single Lav Concealer in either Black or White, or a 6-pack with 3 x black and 3 x white Lav Concealers. This Lav Concealer is a custom mount for the RØDE Lavalier II that fits the capsule snugly, making it easier to conceal the mic while protecting it from glue build-up caused by repeatedly taping directly to the mic. Like the RØDE Lavalier II, the Lav Concealer is designed to be ultra-low profile, sitting flush under clothing for discreet, professional-quality audio capture. It can be attached directly to skin or clothing using Lav Concealer Tape, which is strong, hypoallergenic, and easy to apply, ensuring secure mounting on fabric or skin without worry. The Lav Concealer is made from biodegradable natural rubber, offering an eco-friendly choice you can feel good about. The soft, flexible rubber excels at absorbing vibrations, outperforming harder materials like plastic, and reducing unwanted noise from reaching the lapel mic capsule. The Lav Concealer for RØDE Lavalier II also includes a colour-matched fabric guard and clothing clip made from sprung metal, which attach through small holes on the front and back of the concealer. The combination of rubber and metal works together to block friction and vibrations from transferring to the mic capsule, ensuring clearer sound. FEATURES: - CREATES SPACE:Prevents fabric from touching the RØDE Lavalier II capsule in confined spaces under or within clothing, protecting the lapel mic from friction noise and vibrations for cleaner, clearer recordings. - SHOCK ABSORBING:The moulded rubber concealer provides outstanding absorption of vibrations and friction, while the metal clothing clip and fabric guard blocks vibrations from passing through the concealer to the microphones capsule. - COLOUR OPTIONS:Available in matte black or matte white finish. The matte finish is non-reflective for discrete hiding. - WIRE FABRIC GAURD:The removable wire fabric guard prevents fabric from contacting the capsule. Together, the wire and rubber materials effectively absorb friction, preventing any transfer of friction to the mic capsule. - CLIP, TAPE, OR SEWN MOUNTING OPTIONS:Offers multiple quick and efficient mounting options for RØDE Lavalier II mics on talent, even in high-pressure on-set situations. - ENVIRONMENTALLY SOUND:The Lav Concealer is crafted from 100% natural, biodegradable rubber, making it environmentally friendly. Both the black and white versions are coloured without the use of harmful chemical compounds. WHAT'S IN THE BOX? Single Packs: 1x Rubber Lav Concealer for RØDE Lavalier II (Black/White) 1x Wire Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 6x Lav Concealer Tape 6- Pack: 6 x Rubber Lav Concealer for RØDE Lavlier II (3x Black/3x White) 6 x Wire Clothing Clip (3x Black/3x Silver) 6 x Wire Fabric Guard (3x Black/3x Silver) 36 x Lav Concealer Tape 1x Rubber Lav Concealer for RØDE Lavalier II (Black/White) 1x Wire Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 6x Lav Concealer Tape 6- Pack: 6 x Rubber Lav Concealer for RØDE Lavlier II (3x Black/3x White) 6 x Wire Clothing Clip (3x Black/3x Silver) 6 x Wire Fabric Guard (3x Black/3x Silver) 36 x Lav Concealer Tape

Read more less

The Sidekick Spares Kit is a full collection of accessories for your Sidekick In-Ear IFB Monitor. This tool kit includes each variation of Sidekick eartip (two of each in two different sizes - 12 eartips in total), The Gator Clip, as well as four Sidekick replacement Filter tools. WHAT'S INCLUDED 2 x Satellite Eartip (Small)2 x Satellite Eartip (Medium)2 x Round Eartip (Small)2 x Round Eartip (Medium)2 x Christmas Tree Eartip (Small)2 x Christmas Tree Eartip (Medium)1 x Gator Clothing Clip4 x Sidekick Filter

Read more less

NEVER CHANGE A WINNING TEAM... Each package contains of 3 black, 2, white, 2 grey, 1 brown, 1 off-white and 1 beige Windbubble The Windbubbles are build to stay safe and secure on the microphone, and therefore comes in four different sizes. The frequency through the Windbubble is very close to the microphones natural sound. The wind reduction is the best in the industry, thanks to the bubble-effect in the design The short hair of the fur gives the Windbubble a more rounded and organic shape. The fur is less shiny to blend better with skin, clothes and other surroundings. Available in six different colours make is easier to find a Windbubble for every occasion. Designed in Denmark by sound lovers, for sound lovers. The Bubblebee Windbubbles consist of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing.  And this nothing is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside.  So instead of the wind hammering on the microphone and making those horrible “I’m in the middle of a hurricane”- sounds, it passes right through. The Windbubbles are specially constructed to be mounted quickly and easily on the specified types of microphone and to not fall off during use.  The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphones. It is important that you check the correct size(s) suitable for your lavalier microphone. Please consult our Size Guide to check this. Size 1 - Built for microphones with a diameter of 3,0-4,0 mmElastic opening circumference: 28 mm (1.10”)For Example:Sanken COS-11 (without metal windscreen)Countryman B6, B2D, E6Sennheiser MKE 1Sony ECM-90DPA 6060 Size 2 - Built for microphones with a diameter of 5,0-8,0 mm:Elastic opening circumference: 35 mm (1.38”)For Example:Sanken COS-11 (without metal windscreen)Countryman B3DPA 4060Sennheiser MKE 2, ME2, ME2-US (without windscreen), ME2-IILOM Mikro Uši Size 3 - Built for microphones with a diameter of 5,0-9,0 mm:Elastic opening circumference: 40 mm (1.57”)For Example:Sanken COS-11 (with metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II Size 4 - Built for microphones with a diameter of 8,0-13,0 mm:Elastic opening circumference: 42 mm (1.65”)For Example:Sanken COS-11 (with large metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)LOM Uši Pro

Read more less

DON'T UNDERESTIMATE AN OBVIOUS NAME... The Piece-A-Fur is probably one of the most important additions to your sound recording bag. The high-quality imitation fur is thick, soft and durable, made for sound with a porous back material to allow sound frequencies through and dense, soft fur to deaden friction and reduce wind noise. This combination of an open base material and dense, high-quality fur sets the Piece-A-Fur apart as a top-quality versatile material that can help improve your mounts and recordings greatly, helping you eliminate wind and friction noise to a high degree. PIECE-A-FUR FEATURES Cut the Piece-A-Fur into pieces as desired to make your own wind protection. Eliminate clothing/costume noise caused by friction by cutting and placing under or between the layers of fabric. Reduces friction noise remarkably when rubbed against clothing, hairy chests, skin etc. The base/backing material of the fur is specially selected to allow for better frequency transparency when used to protect the microphone capsule. The fur is specially selected for its high density to deaden friction/rubbing noise The Piece-A-Fur is less shiny or reflective than many other fur types to blend in better with skin, clothing or other surroundings. Soft, durable, comfortable and easy to work with. Can also be stitched into costumes to reduce noise caused by movement in tight areas of fabric. A wide range of colours to help the Piece-A-Fur blend in almost any situation. Designed in Denmark by sound lovers, for sound lovers. The Piece-A-Fur gives you the opportunity to play with a piece of the specially produced wind protection faux-fur yourself. It's lush. You simply cut out the Piece-a-Fur in the desired size and shape and use it when mounting a microphone. This might come in handy if you work with uneven or problematic surfaces like a hairy chest that creates friction noise when recording. The Piece-a-Fur comes in the following six colours:Grey, Black, Brown, White, Off-White and Beige and will partner up perfectly with their Invisible Lav Tape. WHAT YOU GET: A soft, durable piece of faux-fur in either black, brown, grey, beige, off-white or white Measurements:36 cm x 10 cm (14.1” x 4”). Weight: 15g (incl. packaging) Item code: BBI-PAF-BK/BR/BE/OW/WH/GY

Read more less

SPECIALLY DESIGNED DOUBLE-SIDED HYPOALLERGENIC TAPE FOR MOUNTING THE TINY Lav CONCEALERS TO CLOTHING OR DIRECTLY ON SKIN. The new tape features a small recessed area in the sticky tab, to prevent the build up of adhesive residue around your mics capsule. Similar in principle to existing Lav Concealer Tape, the new tiny version includes a handy thumb tab to help you affix the tape to the tiny Lav Concealers. The hypoallergenic tape itself is super sticky, allowing you to mount your tiny Lav Concealer on a number of different surfaces with the confidence that it will stay in place throughout your recording. To apply The Lav Concealer Tiny Tape, simply lift the tape from the backing tape using the thumb-tab. Then line up and press the glue-side firmly onto The Lav Concealer. Then, use the thumb-tab to remove the guard paper, leaving the double sided tape on the concealer. Fit directly to clothing, skin or other surfaces without worry! PERFECT FIT FOR: The Lav Concealer for DPA6060, Sennheiser MKE1, Countryman B6 and Deity W.Lav Micro.

Read more less

STICKINESS AND PERFORMANCE WORTH A GOLD MEDAL... Optimal for use under clothes Sticks directly on clothes and skin. Tape is allergy tested. 3x3 reusable fabric pieces. 30 pieces of high quality tape. Designed in Denmark by sound lovers, for sound lovers. The Invisible Lav Covers allow you to easily mount and hide your Lavalier microphones directly on the skin or on clothes. Each package of Invisible Lav Covers consists of 9 pieces of mesh fabric and 30 pieces of our high quality tape. The transparent double-sided tape keeps your microphone and mesh fabric solid in place on one side and sticks directly to the skin or to clothes on the other side allowing the microphone to be safely and securely mounted almost anywhere. It’s all about being creative: under the collar, next to a buttonhole or under the clothes in the chest area. The tape also has a small piece cut out in the middle of the tape, which is to be saved and used for fixing. While the fabric can be used up to four times, the tape must be replaced after each use. Since the Invisible Lav Covers package comes with 30 pieces of tape, you will be able to do 30 mounts per pack. Each piece of fabric and tape measures 2.2 cm x 2.2 cm (0.86” x 0.86”). It comes in a reusable cardboard package measuring 8 cm x 2.5 cm x 1.7 cm (3.1” x 0.9” x 0.6”). Weight: 10g (incl. packaging).

Read more less

The Microphone Foams for Lavalier Mics have been engineered with precision to provide your microphone with excellent protection from vocal plosives and light wind noise whilst retaining a high-level of acoustic transparency. By using a secure cross-section attachment system, the overall profile of the mic foam has been reduced to offer a more discreet solution to existing alternatives on the market. PREMIUM MATERIALS, DURABLE DESIGNCrafted using premium-quality materials, this lapel mic windscreen is constructed to be super effective at reducing unwanted noise, whilst simultaneously retaining the natural frequency response of your lavalier or headset mic. UNIVERSAL COMPATIBILITYAvailable in five different sizes, The Microphone Foam for Lavalier Mics have been manufactured to be compatible with the most prominently used lav, headset or earset microphones. SLEEK AND DISCREETSay goodbye to bulky and distracting foam windshields or pop-screens with The Microphone Foam for Lavalier Mics. Whether you're using a lapel microphone for interviews, on-location shoots, or a headset microphone during a broadcast, conference, or stage performance, our microphone foams provide a snug and secure fit, allowing you to focus on your content or performance without worrying about equipment issues. The Microphone Foams for Lavalier Mics are the perfect solution to help you make sound sound better and an essential microphone accessory for any audio professional, videographer, content creator, journalist, or broadcaster. FEATURES:Premium materials, crafted with performance and durability in mind.Universal compatibility to fit commonly used lavalier microphones.Sleek and discreet profile.Designed in Denmark by sound lovers, for sound lovers.

Read more less

The Sidekick Filter for The Sidekick In-Ear Monitor is a tool designed to change the driver's white speaker filter, only under extreme circumstances should it get clogged with dirt and affect the sound of your Sidekick. The Sidekick Filter is available in a pack of 8 units, which, when used properly under normal conditions, will easily last for the lifespan of your Sidekick. The Sidekick features the world’s first micro speaker solution for wireless receivers where the entire driver fits comfortably inside the ear. This means practically invisible cues and comms, even in noisy environments. The Sidekick Cable loops behind the ears so that it's easily concealable under hair and clothing. INSTRUCTIONS FOR USE Insert The Filter stick's empty end and pull out the dirty filter cap from The Sidekick's driver unit. Rotate The Filter Stick 180° to line up the new filter cap with the driver unit. Press the new filter cap firmly into The Sidekick driver unit and discard both the tool and old filter cap. For further instructions on changing The Sidekick Filter please refer to the introduction video Here. Instructions are also provided on the packaging. WHAT'S INCLUDED 8 x The Sidekick Filter tool

Read more less

The Round Eartip for The Sidekick in-ear monitor offers comfortable all-day wearablility and medium ambience of your environment, while still having crystal clear comms delivered to left, right or both ears. The Sidekick features the world’s first micro speaker solution for wireless receivers where the entire driver fits comfortably inside the ear. This means practically invisible, crystal-clear cues and comms, even in noisy environments. The Round Eartip offers medium environmental ambience, while still monitoring clear comms. WHAT'S INCLUDED 10 x The Round Eartip for The Sidekick In-Ear MonitorEither Small or Medium fit.

Read more less

THE ANSWER TO YOUR PRAYERS IN COMPACT WIND PROTECTION...  Made for your boom or camera microphone. Handles medium to mild wind. Made from the best imitation fur (high amount of hair pieces per cm2) which allows for optimal wind protection versus frequency transparency. Specially designed rubber base for super easy and secure mounting. When wet, simply dry it up and shake the fur back into a perfect shape.  Designed in Denmark by sound lovers, for sound lovers.  The Windkiller is a short-haired wind protector that fits shotgun microphones from Audio-Technica, Audix, DPA, JVC, Neumann, Røde, Sanken, Schoeps, Sennheiser, Sony and others. See Chart. The core of the Windkiller consists of high quality coarse foam with Bubblebee’s carefully chosen soft and fluffy imitation fur on top. This faux-fur is highly durable, works excellent to block the wind and is aesthetically pleasing for the eye. In the bottom, The Windkiller is constructed with our specially designed rubber mount that grips unto your microphone while still making it perfectly easy to slide the Windkiller on and off. The Windkiller comes in five different sizes, from XS to XL, all with an rubber opening in the bottom that fits shotgun microphones with a diameter of 18-24 mm (0.7”-0.9”). THE BIG MOUNT These come in XS and XL sizes with a rubber opening in the bottom that fits microphones with a wider diameter of 23-26 mm (0.9"-1,02"). There is 5 sizes and two big mount versions to cover all major variants of shotgun microphone: Big Mount:

Read more less

The Spacer Bubble, is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions. The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A short-haired fur cover is available separately if you need it. The Spacer Bubble is available in red, black, green and blue. FEATURES: Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh' and wind. Specially designed rubber base for super easy and secure mounting. Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible. Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection. Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally. Available in seven different sizes - to ensure you find a size that perfectly fits your favourite shotgun mic. Save valuable time while getting the best quality. Practical mesh bag included for easy storage and fast mounting. Designed in Denmark by sound lovers, for sound lovers. The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom. The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds. When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready! The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you're working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency. WHAT’S INCLUDED: 1x The Spacer Bubble 1x The Long-Haired Spacer Cover 1x Mesh Storage Bag   WHICH SPACER BUBBLE SIZE?We offer five different lengths and two different mount sizes: Weight XS:Mesh base: 40g (1,4oz)Long-haired slip on fur: 20g (0,7oz) Full weight w/ packaging: 260g (9,1oz) Weight S:Mesh base: 50g (1,7oz)Long-haired slip on fur: 25g (0,8oz)Full weight w/ packaging: 275g (9,7oz)   Weight M:Mesh base: 55g (1,9oz) Long-haired slip on fur: 30g (1oz)Full weight w/ packaging: 290g (10,2oz) Weight L:Mesh base: 60g (2,1oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 300g (10,5oz) Weight XL:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging:305g (10,7oz) Big Mount: Weight XS Big Mount:Mesh base: 40g (1,4oz) Long-haired slip on fur: 20g (0,7oz)Full weight w/ packaging: 260g (9,1oz) Weight XL Big Mount:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 305g1 (0,7oz)

Read more less

The Invisible Lav Covers - Fur Outdoor allow you to easily mount and hide your lavalier microphones directly on the skin or on clothing, whilst protecting your audio against clothing rustle. Each package of The Invisible Lav Covers Big Bag - Fur Outdoor consists of 40 pieces of fur squares, each reusable 3-4 times, for at least 120 mounts (choose from black/beige/white). Features: Optimal for use under clothing Provides you with ultimate transparency and invisibility when mounting your lavalier mics Available in black, beige or white Stick directly to the skin or clothing 40 pieces of reusable fur squares Each piece can be used 3-4 times, giving you at least 120 mounts per bag Comes in a useful reusable zip-lock storage pouch Designed in Denmark by Sound Lovers, for Sound Lovers While the fur can be used many times, you will be able to do a minimum of 120 mounts per pack. Use the transparent, double-sided Invisible Lav Tape (sold separately) to keep your microphone and Invisible Lav Cover firmly in place whilst sticking directly to the skin or to clothing allowing the microphone to be safely and securely mounted almost anywhere. It’s all about being creative: under the collar, next to a buttonhole, or under the clothing in the chest area. Not sure which colour to use? The Invisible Lav Covers - Fur Outdoor are also available in a smaller multipack, that also includes our, that also includes our Invisible Lav Tape

Read more less

The Windkiller SE (Special Edition) uses Bubblebees finest imitation fur to effectively protect your DPA 4097 or 4099 mic against wind noise. On the outside, The Windkiller SE for DPA 4097 features a high-density, soft, multi-pile fur to gradually slow the wind down before reaching your mic. Inside, The Windkiller SE uses a soft and smooth, open material. This allows your mic to sound as transparent as possible, whilst protecting your recordings against harmful wind noises. The black elastic tab and press stud keeps The Windkiller SE firmly attached to your microphone, whilst seamlessly blending into the windshield to remain discreet. When fitted correctly, The Windkiller SE holds a bubble of dead air around the front of the mic capsule, allowing the microphone to function as naturally as possible and keeping wind interference at bay. FEATURES: Designed to fit the DPA 4097 Micro Shotgun and DPA 4099 Instrument microphones. Uses the much-loved, multi-pile fur for the ultimate protection against wind noise. Transparent inner fabric maintains a very natural frequency response, on or off-axis. Manufactured in Denmark with quality and comfort in mind by sound lovers, for sound lovers.

Read more less

The Spares Set for ME2-II Lav Concealer contains 6 full sets of metalwork replacements for The Lav Concealer for Sennheiser ME2-II  A 'set' of metalwork consists of a metal Fabric Guard and a metal Clothing Clip. The Spares Set has 3 x silver sets (for white Lav Concealers) and 3 x black sets (for Black Lav Concealers), making 6 sets in total.

Read more less

The Spares Set for ME2 Lav Concealer contains 6 full sets of metalwork replacements for The Lav Concealer for Sennheiser ME2. A 'set' of metalwork consists of a metal Fabric Guard and a metal Clothing Clip. The Spares Set has 3 x silver sets (for white Lav Concealers) and 3 x black sets (for Black Lav Concealers), making 6 sets in total.

Read more less

THE STICKIEST ONE YOU'LL FIND... Optimal for use under clothes Sticks directly on clothes and skin Tape. is allergy tested. Works perfectly with The Piece-A-Fur. 120 pieces of high quality tape. Designed in Denmark by sound lovers, for sound lovers. This product is for the individuals who have their own routines on how to mount Lavalier microphones and insist to use the best possible tape on the market. This double-sided tape is exactly the same tape that comes with our Invisible Lav Covers. The only difference is that you do not get any mesh fabric but instead a batch of 120 pieces of our best tape. The transparent double-sided tape keeps your microphone solid in place on one side and sticks directly to the skin or to clothes on the other side allowing the microphone to be safely and securely mounted almost anywhere. The tape also has a small piece cut out in the middle of the tape, which is to be saved and used for fixing. The tape must be replaced after each use. Since the Invisible Lav Tape package comes with 120 pieces of tape, you will be able to do 120 mounts per pack. Each piece of tape measures 2.2 cm x 2.2 cm (0.86” x 0.86”). Weight: 20g (incl. packaging)

Read more less

MOUNTING A LavALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. This Lav Concealer fits the Deity W.Lav Pro, the lavalier included in the Deity Theos System. Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape Price reduced as packaging has been opened. All pieces above pieces are still included.

Read more less

SAY GOODBYE TO VOCAL PLOSIVES AND LIGHT WIND NOISE WITH OUR, HIGH-DENSITY, ACOUSTICALLY TRANSPARENT MICROPHONE FOAM, SPECIFICALLY DESIGNED FOR THE DPA 4098 GOOSENECK MICROPHONECarefully engineered with performance and design, The Microphone Foam for DPA 4098 offers excellent protection against vocal plosives and light wind buffeting, all while maintaining a very high-level of acoustic transparency for your DPA 4098 podium microphone. Whether you are recording sound for a speech, conference, live performance, church or house of worship, The Microphone Foam for DPA 4098 is essential microphone accessory for any audio professional or performer. FEATURES: Premium Materials: Crafted with performance and durability in mind. Secure Attachment: Durable rubber mount ensures a secure fit. Sleek profile: Discreet design available in black and white to blend seamlessly with your microphone. Designed in Denmark by sound lovers, for sound lovers. PERFECT FITDesigned specifically for the DPA 4098, this Microphone Foam fits snugly over the microphone while the durable rubber mount holds it securely in place. It’s designed to strategically protect the microphone capsule to be more effective at protecting the sensitive parts of the microphone’s pick-up pattern. PREMIUM MATERIALS THAT MATTERCrafted using premium-quality, lightweight, open-cell foam material, this windscreen effectively reduces or eliminates unwanted vocal plosives and light wind noise. At the same time, it retains the natural frequency response of the DPA 4098, ensuring pristine audio quality. DESIGNED WITH DETAILThe Microphone Foam is designed with a sleek, discreet profile that allows audiences to focus on the audio. Available in both black and white, it blends seamlessly with your microphone.

Read more less

MAKE WIND NOISE A THING OF THE PAST FOR YOUR DPA 4098 GOOSENECK MIC WITH THE WINDKILLER SEThe Windkiller SE (Special Edition) for DPA 4098 is the perfect match for your DPA 4098 supercardioid gooseneck microphone, providing exceptional wind noise reduction while maintaining the natural response of the microphone’s capsule. With The Windkiller SE for DPA 4098, you can capture crystal-clear audio, free from the worry of wind noise interfering with your sound. This slip-on windshield features an inner foam core surrounded by our industry-leading multi-pile faux fur, designed to offer outstanding wind protection. The durable rubber mount not only ensures a secure fit but also helps absorb unwanted vibrations. Whether you are recording sound for a speech, conference, live performance, church or house of worship, The Windkiller SE for DPA 4098 is the perfect accessory to upgrade your DPA 4098 Podium Microphone and experience flawless sound quality in any environment. Features: PERFECT FITSpecifically designed for the DPA 4098, this Windkiller SE fits snugly over the microphone while the durable rubber mount holds it securely in place. It’s designed to strategically protect the microphone capsule from unwanted wind noise which protecting the sensitive parts of the microphones pick up pattern. MULTI-PILE FUROur signature multi-pile faux fur effectively diffuses wind noise by slowing it down gradually, while maintaining the natural tonal qualities of your podium microphone. DESIGNED WITH DETAILThe Windkiller SE has been designed with a sleek, discreet profile that allows the audience to focus on the audio. Available in both black and white, it seamlessly with your microphone.

Read more less

EVERYTHING YOU NEED IN THIS ESSENTIAL KIT TO RECORD CRYSTAL CLEAR SOUND WITH THE SONY ECM-V1 OUTDOORSWe’ve all seen footage where the microphone picks up those horrible wind noises; it’s very distracting and ruins the video… Get ready to make this a thing of the past with The Outdoor Mic Kit for Sony ECM-V1; carefully curated to help you make sound sound better. This is the perfect accessory kit for use with the Sony ECM-V1 (as featured in the Sony UWP-D D21, D26 and D27 wireless microphone kits). Whether you’re seasoned location sound recordist, videographer or content creator The Outdoor Mic Kit for Sony ECM-V1 is the perfect accessory kit to help you make sound sound better for on-location and exterior shoots like the pros. INCLUDES - THE WINDBUBBLEDelivering exceptional wind protection for your lav mic, ensuring clear and natural sound even in windy conditions. Its innovative design features multi-pile imitation fur and a unique open core, creating a bubble of dead air around your microphone for optimal clarity. - THE MICROPHONE FOAMS FOR LAVALIER MICSOffering excellent protection against vocal plosives and light wind noise while maintaining acoustic transparency. Designed with a secure cross section attachment system to provide a discreet solution for any lapel mic setup for any scenario. - THE CABLE SAVERAdd strain relief and eliminate unwanted cable noise. Save your cable from breaking at the combiner by adding elasticity to your microphone cable.- THE MIC ACCESSORY CASEProviding an organised, protective and robust solution for keeping all your microphone accessories together. The 6 different compartments and transparent material ensures separation of accessories, allowing for quick and simply access and organisation. WHAT'S IN THE BOX? 1 x The Windbubble - Size L03 (Black or White) 2 x The Microphone Foams for Lavalier - Large (Black or White) 1 x The Cable Saver (Black or White) 1 x The Mic Accessory Case

Read more less

EVERYTHING YOU NEED IN THIS ESSENTIAL KIT FOR HIDING YOUR SONY ECM-V1 LAVALIER MICIn the world of sound production, audio recordings or video content creation, hiding mics can present many challenges, such as clothing rustle, wind, or cable noise. The Mic Hiding Kit is tailored for all needs; offering a selection of essential tools to discreetly conceal your Sony ECM-V1 lapel mic (as featured in the Sony UWP-D D21, D26 and D27 wireless microphone kits) for clear and professional-sounding audio. With our kit, you can try before you buy, ensuring you find the perfect solution for your needs. The Mic Hiding Kit for Sony ECM-V1 has many tools carefully designed for help you make sound sound better. Whether you’re a seasoned location sound recordist, videographer or content creator The Mic Hiding Kit for Sony ECM-V1 is the perfect accessory to help hide your lapel mic like a pro. INCLUDES: - THE LAV CONCEALER FOR SONY ECM-V1 LAVALIERThis ultra-soft, flexible mount is perfect for concealing your Sony ECM-V1 while minimizing unwanted clothing noise and absorbing vibrations. It can be sewn, clipped, or taped to the talent or costume using the included accessories. The metal fabric guard creates a crucial space around the microphone capsule for optimal audio clarity, while the combination of rubber and metal helps reduce vibration transfer from the fabric to the microphone. - THE LAV CONCEALER TAPEOur double-sided hypoallergenic tape is ideal for securely attaching The Lav Concealer to clothing or directly to the skin, ensuring reliable placement even when clips aren't an option, while maintaining a discreet microphone position. - THE INVISIBLE LAV COVERS - FUR OUTDOORCrafted for both discretion and effectiveness, our reusable faux fur outdoor covers are designed to be worn under clothing, eliminating rustling and wind noise for clear audio recordings. - THE INVISIBLE LAV COVERS - MOLESKINMade from eco-friendly bamboo material, this solution allows lapel mics to be placed on the skin or under clothing, effectively minimising friction noise while remaining exceptionally discreet. - THE INVISIBLE LAV TAPEDouble-sided hypoallergenic tape with a window that keeps your mic capsule free from glue residue. Can be used alone or with all Invisible Lav Covers. - THE INVISIBLE SKIN TAPEBreathable and sweat-resistant, this tape provides a discreet, low-profile solution for managing your lavalier microphone cable. Its matte, skin-like finish allows for seamless makeup application, making it easy to conceal the mic cable in plain sight.-THE MIC ACCESSORY CASEProviding an organised, protective and robust solution for keeping your Sony UWP-D microphone and mic hiding accessories together. The six different compartments and transparent material ensures separation of accessories, allowing for easy access. WHAT'S IN THE BOX 1 x Lav Concealer for Sony ECM-V1 6 x Lav Concealer Tape 3 x FUR-OUTDOOR - Invisible Lav Covers 6 x MOLESKIN - Invisible Lav Covers 9 x Invisible Lav Tape 5 x Invisible Skin Tape 1 x The Mic Accessory Tape

Read more less