Designed to replace the OEM Rubber Eyecup. The #3066 Blackmagic Special Use Round Eyecushion (previously known as #6066) is used to replace the OEM Blackmagic rubber eyecup. #3066 fits tightly around the actual eyepiece diopter - the rubber eyecup must be removed before using this Eyecushion. The design will bring your eye slightly closer to the evf display, thus opening up the view inside the eyepiece. The fabrication process results in a functional design, comfortable feel and unique look. The Eyecushion's position is not affected by adjusting the diopter. Also fits: Sony Fs7 by replacing the oem rubber eyecup. However, care is needed when attaching, email us for if you need guidance. PortKeys LEYE Viewfinder. Please remove the velcro pad that comes with the viewfinder.  To attach the Eyecushion onto your eyepiece, simply follow these instructions: Remove the oem rubber eyecup. Stretch the Eyecushion rubber backing around the eyepiece diopter. The fit is snug and tight. Fiddle around with the backing to make sure it's evenly attached around the eyepiece diopter. Care instructions: Gently hand wash with lukewarm water when need and pat dry. The facing material may separate with repeated washing or washing with hot water. This Eyecushion will not last forever. Please expect a reasonable amount of use and have one as a spare when the other is being washed. Similar to your underwear, don't share your Eyecushion with anyone. Fits: Blackmagic Design URSA Viewfinder and other similar eyepieces NOTE: Exempt from return policy if packaging opened due to hygiene reasons.

Read more less

Great general purpose wiper for cleaning equipment. Combine with a spray cleaner or foam cleaner. Also great for drying off kit Embossed 2ply blue roll - 150 metre x 6 rolls Diameter of roll 19cm. 175mm x 150m.

Read more less

Clip'em. Keep'em. Don’t leave gloves behind, clip them on right by your side with the Dirty Rigger Glove Clip. Single-handed unclip Engineer grade, ultra tough material Non-conductive 5kg/7lbs break-away Size: 12.5cm (L) x 3.3cm (W) Glove not included. Measurements are approximate.

Read more less

Rolls of 'Letraline' Vinyl 3mm wide. Useful for marking the film/sensor plane down the side of the camera. Also popular for gridding whiteboards. This is for a single roll of the colour selected. These can also be supplied in A4 sheets with around 40x 29cm long lines, however please get in touch to organise this.

Read more less

Comfortable Durability. Provide your hands with a comfortable barrier against a moderate manual working lifestyle. The fitted design moves with your hands as you work, minimising the risk of snagging and making it a comfortably light glove to wear. Although light, the Comfort Fit doesn't hold back on durability. The breathable materials look after your hands on the inside, whilst the double-layered synthetic leather and double stitching do the hard work on the outside. Light & flexible for all-day comfort Snug fit to minimise snagging Double layered synthetic leather on palm and key wear areas Double stitching Double stitched lanyard eyelet on wrist cuff (lanyard not included) Neoprene knuckle padding Write on ID tag Low profile palm padding Machine washable at 30C This glove is currently undergoing PPE testing and should be considered suitable for general use in the meantime. For specific PPE requirements please refer to our specialised PPE range.

Read more less

Oval Extra Large Viewfinder Eyecushion, #6014 121mm x 84mm / 4.76" x 3.3" Compatible with: Alphatron, Canon C100, Canon  C200, Canon C300, Canon XF300, Canon XF305, Canon XF205 HD Camcorder, Kamerar LCD View Finders: QV-1, QV-1M, QV-1 for BMPCC, MagView 3:2, MagView 4:3, and MagView 16:9., Sony HVR-S270, Sony HXR-NX100, Sony PXW-Z150, Sony Fs5, Kamerar QV-1, Kamerar VF-4+, Carry Speed VF-4, and other similar eyecups Since 1984, every single genuine Bluestar Eyecushion is carefully crafted and inspected one at a time to ensure a perfect, sanitary, safe and consistent Eyecushion, right here in our Toronto production studio. Our production and inspection staff are taught and updated on an ongoing basis to ensure consistency of our high standards.  In a world where quality is commonly compromised for profit, we are proud to maintain our high standards and deliver to you a high quality Canadian made product.  And interestingly, Bluestar Eyecushions have been tested by Nasa engineers for space use and could be the first Eyecushions sent to Mars. As the worldwide leader in the Camera Viewfinder Eyecushion market since 1984, Bluestar has become synonymous with Eyecup comfort around the world. NOTE: Exempt from return policy if packaging opened due to hygiene reasons.

Read more less

Premium-Grade, Eco-Conscious Matt Gaffer Tape for Professionals. Trusted by crews across film, TV, theatre, and live events, NRG Non-Reflective Gaffer Tape delivers outstanding performance. Designed for temporary fixes, labelling, floor marking, talent marks, and securing cables, this tape offers exceptional adhesion with easy, residue-free removal*. Made from 100% natural cotton cloth (120 mesh) and bonded with a 100% natural rubber adhesive, NRG Gaffer Tape is a sustainable choice that doesn’t compromise on performance. Its non-reflective matte finish and write-on surface make it a go-to essential for fast-paced production environments where gaffers tape performance and reliability is key. Key Features: ✅ Professional-grade matte finish – non-reflective and camera-ready ✅ High-performance natural adhesive – strong hold, clean removal* ✅ Residue-free on most clean surfaces* ✅ Smooth, controlled unwind – for consistent, stress-free use ✅ Hand-tearable – no scissors or knives needed ✅ Highly conformable – adheres to irregular or curved surfaces ✅ Abrasion-resistant – withstands wear in high-traffic areas ✅ Weather-resistant – ideal for short-term outdoor use Eco Credentials: ♻️ 100% natural cotton cloth 🌱 100% natural rubber adhesive 🌿 Plant-based inks and dyes 🚫 Free from harmful chemicals 🌍 Reduced carbon footprint 📦 Recyclable cardboard core Application Tips: For best results, apply only to clean, dry, smooth, and non-porous surfaces, and avoid prolonged exposure to UV or direct sunlight. Make sure surfaces are free from oil, dust, or moisture to ensure optimal adhesion. Storage: Store in a cool, dry place, away from sunlight and extreme temperatures. *Residue-free performance depends on surface type, conditions, and duration of application.

Read more less

This brass Manfrotto 013 Double-ended Spigot is compatible with a variety of stands and grip gear including the 2940, 2941, 3077, 308, and 3095. It has a 5/8" (16 mm) diameter with 1/4"-20 and 3/8" threaded ends. Essential, top-quality, and extremely versatile, this adapter spigot is a necessary addition to any photographer’s or videographer’s toolkit. With a sleek and professional look, it is made with durable and lightweight brass that won't rust or deteriorate over time. Pair it with a wide variety of stands and grip gear for great versatility during your next shoot. It's two-sided design lets you attach two accessories at once to make shooting easier. Rest assured that your camera, monitor, or any other piece of equipment is completely secure thanks to the adapter spigot’s tight hold. you can even use it with an adjustable arm to mount cameras and capture new perspectives. It's ridged centre makes setup and removal quick and easy. What’s more, it weighs a mere 70g, so you won't even notice it’s there as you take it from location to location. Designed with a universally compatible 16mm diameter, it has a double male thread end with 6.4mm and 9.5mm attachments. This means that you can attach almost anything to it to take your shooting to the next level. Robust and built-to-last, this simple addition to your kit will save you time and energy and suits a variety of purposes. Ideal for use with a variety of stands and grip gear Tripod adapter spigot with universal 16mm diameter Standard 6.4mm and 9.5mm threaded ends for compatibility Weighs a mere 70g for great portability High-quality and durable brass body Weight: 0.07 kg Attachment (Bottom): 3/8″ screw, 5/8″ (16mm) stud Top Attachment:1/4″ screw, 5/8″ (16mm) stud Colour: Brass Superclamp Compatible: Yes Material: Brass Height: 6.8 cm

Read more less

Metal chalk holder. Can hold a whole chalk stick minimising breakages offering better writing and drawing performance. Comfortable to hold and keeps hands free of dust.

Read more less

Used when rigging lighting effects, these safety bonds provide a secondary flexible coupling in addition to the regular fixing. Ideal for use on stage or in pubs/clubs.Black PVC coated, galvanised steel cableCable diameter: 2mmScrew-gate carbine hooksWorking Load Limit (WLL): 10kg

Read more less

Used when rigging lighting effects, these safety bonds provide a secondary flexible coupling in addition to the regular fixing. Ideal for use on stage or in pubs/clubs. Black PVC coated, galvanised steel cable Cable diameter: 3mm Screw-gate carbine hooks Working Load Limit (WLL): 25kg

Read more less

ONE-WRAP cable ties manufactured by Velcro companies, these ties are 20mm wide and 150mm long. The cable ties are incredibly versatile and offer a superior use over conventional plastic ties as they are soft on cables, but can also be used 100's of times, you can also open and re-close to add more cables to the loom, quick and easy. Available in Assorted Colours inc, Black, Red, Blue, YellowWidth: 20mm (Based on the head, the width of the rest of the strap is 30% narrower.)Length: 150mm Instructions: Secure to cord by inserting rounded end through the hole in strap and pulling tight. Wrap tie around cords and back onto itself to secure.

Read more less

Sharpie China Wax Marker Pencil Peel-off Unwraps to Sharpen Black Wax china marker, ideal for smooth glossy surfaces Easy to sharpen by pulling a fine cord to unwrap a new length of wax core Pack Weight: 0.122 kg Pack Dimensions: 57x180x25 mm Features Wax china marker, ideal for smooth glossy surfaces Easy to sharpen by pulling a fine cord to unwrap a new length of wax core

Read more less

Provides potent dust-removing power for practically any task Ideal for use on keyboards, photographic equipment, workstations etc. 100% ozone safe

Read more less

  Reducing Bushing Set, from female 3/8'' to 1/4'' male screw Female adapter 3/8'' to 1/4'' Made from Nickel plated Steel

Read more less

Sticky Circles for reliable mic placement. In this pack you get 90 pre-cut 24mm diameter Sticky Circles. URSA Sticky Circles are 24mm in diameter, see-through and very low profile at just 0.4mm. The sticky tape is certified hypoallergenic so it can be used directly on skin. You can also use it on fabrics as it leaves no residue and peels off without tearing. Each URSA Sticky Circle has been pre-cut and has a small peel-off tab for easy & fast use. They are compatible with a variety of mic mounts including RM11s, DPA Concealers and can also be used with URSA MiniMounts. You get 30 of these stickies with every pack of URSA Plush, Fur or SoftCircles. More About URSA Sticky Circles URSA Sticky Circles (Pack of 90) Each 24mm diameter URSA Sticky Circle has been pre-cut and has a small peel-off tab for easy & fast use. They are compatible with a variety of mic mounts including RM11s, DPA Concealers and can also be used with URSA MiniMounts. (You get 30 of these stickies with every pack of URSA Plush, Fur or Soft Circles.)

Read more less

Totally Crystal Clear As strong as regular gorilla tape, but with no cloth, weatherproof, you can tear it by hand, it will fix, patch, seal, hold and repair Gorilla Clear Repair Tape to fix, patch, seal, hold and protect. No other tape offers the clarity, strength and durability of Gorilla Clear Repair. Easy to tear by hand, with Gorilla Clear Repair, you can fix, patch, seal, hold and protect almost any surface with a crystal-clear appearance for a perfect fix every time. The ideal solution for almost any repair, including Smartphone screens, Gorilla Clear Repair features the strength of Gorilla Tape in a weatherproof, airtight, crystal-clear tape.

Read more less

Low profile plastic hook on one side and velour loop on the other. Perfect for cable & cord management. Cut To Required Length On Site Low Profile Hook & Loop Fasteners Easy, adjustable and re-usable.

Read more less

Our fully customised engraved Clapperboards are perfect for your longer running productions, special shoots or as a gift for a member of the crew as a small memento for their work on the production. They are also very popular with production companies as they can include their logo on the board. A custom board normally takes 3-4 working days from order to shipment. This is for board only, to be combined with your own sticks or sticks of your choice supplied separately. Features: Deep Engraved and infilled for durability. Opaque 3mm plastic so that they can be back-lit for night shoots As standard, the design will be infilled Black. We can also infill unit letters (A, B, C etc) with the corresponding colours. Available in five sizes: Nano - 76mm W x 70mm H Tiny - 150mm W x 102mm H Small - 190mm W x 129mm H Medium - 280mm W x 190mm H (Most Popular) Large - 380mm W x 258mm H Note: Height measurement is the board without the sticks attached Design Process: The complete layout of the board can be engraved to how you would like it. Including production title, Director and DOP names, additional information boxes and fonts etc. If you want a specific layout we would ask for you to draw this out ahead of time and share it with us when you place the order. A limitation of an engraved board is that you cannot have complex multicolour designs. For example, a logo may have several colours in it, we would only be able to infill a single colour. Any colour other than our standard colours (Black, Red, Blue, Yellow, Green) is hand-mixed, therefor will be an approximation colour match. Order Process Place Order on our website. Please provide a sketch or/and a detailed description of how you would like the board to look. (Email this to team@cinestore.co.uk with your order number). Any logos/images need to be provided in high ref format, Preferably 300DPI in PDF, PNG, SVG or AI, however, feel free to send what you have and we can advise. We will put the design together and send it to you for your approval.  We allow for up to 2 minor revisions (including: font change, nudging of a line/text etc). Please allow time between edits. Any major revisions (such as a different layout) are chargeable at £20+VAT. Once you have approved the design, it will be sent to be produced. At this point, no further changes can be made.  Expect a minimum of two full working days from approval of the design for the board to be produced. You will receive a notification when you order ships.  Not included in the cost is; Licencing costs if you request a specific font. Complex artwork prep (for example, designing a logo from scratch). Major design revisions, More than 2 minor revisions.  This is for the Board only, no sticks are included. Complete clapperboards with sticks are also available. Custom boards are non-returnable unless faulty. aka; clapperboard, slate, clapper board.

Read more less

PELI™ 1010 Micro Case is part of the Peli Micro Cases, a new range of waterproof cases to protect your valuable small items. They have the same look as larger Peli cases, plus they combine a new attractive style, and offer the legendary strength of Peli Cases. With the new Peli 1010 Micro Case you will be able to protect your cell phone, photographic camera, Personal Digital Assistants (PDA), electronic games, pager, radio, and other valuable small items. Peli Micro Cases will totally protect your valuables, as they are watertight and crushproof and have an automatic pressure purge valve. Every Peli Micro case is available in solid color or clear with matching liner and speed lock. They come with a carabiner for easy attachment. The Peli Micro Cases are excellent for trips or outdoor activities when you need to protect your valuables from water, falls, knocks, sun, atmospheric changes, etc. and as they are small sized so they can fit into luggage, bags, glove compartments, other Peli Cases and so on.And remember, smaller does not mean less strong, the Peli Micro 1010 case is just as durable as the larger models. Unconditionally guaranteed forever on these waterproof cases and protective cases. Peli Case Size Guide. INSIDE 10.8 cm x 6.9 cm x 4.1 cm  OUTSIDE 13.81 cm x 10.32 cm x 5.4 cm

Read more less

These Hook & Loop cable ties are great for managing all times of electronic wires, cords, and cables. The ability to quickly fasten and release the ties make them a useful addition to your kit. For a more secure hold, thread one end through the eye hole to form a wrap. This design allows cables to be connected together, making the strap longer. Features: Strong adherence Can be cut to length Reusable and durable design  Nylon material provides long life span and weather resistance   Size: 10mm x 150mm Pack of 10 cable ties

Read more less

FEATURES & BENEFITS All keys stored in a size marked and colour coded plastic holder for easy selection. Standard hex keys in high tensile steel for long life STANLEY® 8-PIECE HEX KEY SET - 1.5mm - 6mm

Read more less