Staedtler Lumocolor permanent markers are a fast drying permanent marker making them ideal for both left and right handed people. They are a universal marker and will mark virtually any surface, with excellent smudge proof and waterproof qualities. In addition they are "dry safe" which means the cap can be left off for several days without the marker drying out.Staedtler Lumocolor permanent markers are available in four brilliant colours . In addition the black marker has exceptional weatherproof qualities making it ideal for outside use. Lumocolor permanent markers can be refilled with Staedtler permanent refill ink. The F (318) fine tip writes approximately a 0.6mm line

Read more less

Genuine Chamois Leather/sponge on one side and fully cushioned single layer of foam on the other side for extra comfort. Available in four styles: Small ovals - 7.5cm x 10cm (3" x 4") Arri* Small rounds - 7.5cm (3") Mitchell, Panavision* Large round - 10.5cm (4.25") BETACAM, Other Broadcast cameras* Also knows as TBAs *The suggested cameras that these will work with are purely a guide, please check your eyepiece size prior to choosing your eyepiece cover to ensure it fits correctly.

Read more less

Sabre Foam Cleaner x 480 ml Biocidal hard surface foaming cleaner Citrus fragrance suitable for all areas including toilet areas, shops and offices, hotels, public buildings, catering etc. Cuts clean through grease and grime. Active foam assists thorough cleaning. Effective sanitising action leaves all surfaces hygienically safe and clean. Ozone friendly.

Read more less

High Definition BNC Jack To Jack adaptor, 75OHM 3G HDTV These high-performance, 75-ohm types, have been developed specifically for HDTV applications and have an extremely low return loss

Read more less

25ml CFC Free Pump Action Spray, Pocket or Camera Bag Size Alcohol Free. Solvent Free Perfect for coated and polycarbonate lenses Use with Calotherm microfibre cloths for the ultimate in cleaning Safe for all spectacle lenses including polycarbonate & multicoated lenses

Read more less

The original KONDOR BLUE Mini Quick Release Plates have become a rigging essential and are ubiquitous throughout the industry. With micro revisions along the way, it was time to go back to the drawing board and create the ultimate Mini Lock for professional camera accessories. Not only is the design overhaul smaller, lighter, and more feature-rich, but it is also compatible with the original Mini Quick Release male plates, anti-twist cradles, and ecosystem accessories. This allows users to upgrade with confidence knowing their initial investments have not gone to waste. Mounting security is paramount. There are several pro mounting options for the male quick release plate: Female ARRI style mountMale ¼ 20 ARRI style mount (3mm pins are removable and storable within the plate)NATO rail¼ 20 or ⅜ 16 receiving threads¼ 20 or ⅜ 16 mounting boltsAny of the above options combine with a centralized M4 set screwThe female Mini Lock receiver also received new mounting options. The receiving ⅜ 16 threads are now deeper for more security. Removable 3mm anti-twist ARRI style pins can also be added in either orientation. The outer profile continues to be compatible with KONDOR BLUE’s range of anti-twist cradles as well. Stainless steel mounting hardware for all the mentioned configurations is included with the kit. Because of the tiny footprint of the Mini Lock, achieving tight tolerances is critical for secure locking. The safety latch—which still features its unique ability to stay fixed when open—now features an integrated M4 nylon tip set screw. Using the included 2mm hex tool, a user can fine tune the plate-to-plate fit by simply adjusting the set screw. The nylon tip smoothly glides along the surface of the male quick release plate removing any potential play, all without marring the surface. Each line, cut, and engraving has carefully been considered to enhance the reliability of Mini Lock. Available in a variety of colourways, the KONDOR BLUE Mini Lock is the perfect solution for mounting crucial cinema accessories. Features Mini Quick Release Plate Zero play, mini dovetail quick release system for rig accessories Integrated NATO rail on male quick release plate Versatile pro mounting solutions Compatible with KONDOR BLUE’s original Mini Quick Release male plates Weight: 39g/1.4 oz Dimensions: 25mm W x 17mm T x 42mm D Product Code: KONMLR

Read more less

FEATURES: The Microfibre cloth is made of 88% polyester and 12%polyamide. It is suitable for a range of applications in cleaning, including lenses, filters, and other cleaning surfaces. The FCLOTH measures 250mm x 250mm (14g) and130mm x 135mm x5mm Folded. The product is packed into 50 units per bag, 690g weight, with dimensions 270mm x 130mm x 50mm. Cleaning Cloth

Read more less

Undercovers are the perfect solution to completely hide lavalier microphones. Used with the included Stickies, these soft, fabric discs are designed to minimize the sound of clothing movement while providing protection from light wind. Available in: Black, Grey, White or Mix Available quantities: 30 Undercovers and 30 Stickies 100 Undercovers and 100 Stickies (not in Mix)

Read more less

RoboCup Holster is our version of a "Mini Front Box" and is another exciting add-on accessory for the RoboCup that securely holds your pens, keys, wallet, phones, tools and much more. In the storage area, there's a charging port slot which has been carefully designed and also a tiny drain hole. The 6 tool slots are reinforced for durability and sized for carabiners, scissors, hex keys, pliers and screwdrivers. For convenient viewing, a smartphone or tablet can be leaned against the Holster. Attach using the provided two straps and tighten snugly to secure. Remove all existing straps from the RoboCup before attaching the Holster. The position of the Holster can be swivelled around the RoboCup for ideal placement. The Holster can also be placed on a desk or strapped onto most tubes. For a more permanent attachment (not provided), use a stainless steel hose clamp for the top strap but be sure to not over-tighten and use a plastic cable-tie for the bottom strap. Built with a robust thick wall design with UV-stabilizers added for longevity. Backed by a “no-hassle” 3-year warranty. *Robocup sold separately.

Read more less

High quality and versatile clamp Fits with a range of Super Clamp pins, hooks and studs Supports up to 15 Kg Can clamp onto a variety of round and square surfaces Awarded TÜV safety certification aka K-Clamp, K Clamp

Read more less

SOFT FOAM MOUNTS WITH FLAT SIDES URSA Foamies! Soft foam mounts for your COS11s, DPAs, Sennheisers & B3s. Designed with flat sides so they can be stuck directly to skin or costume. The foam provides a soft, quiet buffer to reduce clothing noise. Made from the highest quality sponge. Available in Packs of 12 in Black, Brown, Beige or White. Features URSA Foamies are compatible with microphones which measure 3-5mm diameter. These mics include: COS11s, DPA 4060, 4071, MKE2 & The Countryman B3. Can be rigged on to aerial tips to help reduce RF loss. URSA Foamies measure 24mm length, 17mm width and 9mm tall with a 2.5mm diameter hole that stretches up to 6mm. (URSA Mini Foamies measure 22mm length, 14mm width and 7mm tall with a 1.5mm diameter hole that stretches up to 4mm)

Read more less

Our Standard Engraved Boards are a must on any shoot. These are made in house and are a high-quality board built for life on set. This is for a Replacement Board only, no sticks are supplied. Complete Clapperboards with sticks are also available. Features: Deep Engraved and infilled for durability. 3mm/4mm Plastic. (Depending on sticks, contact us if you need a specific thickness)  Opaque plastic so that they can be back-lit for night shoots Letters are Black infilled. Available in five sizes: Nano - 76mm W x 70mm H Tiny - 150mm W x 102mm H Small - 190mm W x 129mm H Medium - 280mm W x 190mm H - Standard Size Large - 380mm W x 258mm H Medium is the most popular and 'standard' size. We also offer a customised board design service that will allow you to fully customise the layout of your board. aka; clapperboard, slate, clapper board.

Read more less

Shurtape Console Tape is a premium paper tape that is printable and removes cleanly. Is ideal for use on sound and lighting boards. Easily tearable by hand this tape also leaves minimal to no residue when peeling off and can be used for writing on without any fuss. Features: Can write on it. Low/No Residue Tearable by hand Flexible Resistant to water, oil, and solvents Provides excellent adhesion Meets LHAMA requirements for use in arts and crafts

Read more less

Back issue of the British Cinematographer magazine. This is for a single back issue magazine. For Back Issues, Stock is limited. British Cinematographer is Europe’s leading magazine covering the art and craft of international cinematography. The flagship title is endorsed by and distributed to BSC, IMAGO, GBCT, ACO and GTC members, collectively reaching over 16,000 named members in 56 countries worldwide. Their bi-monthly magazine, launched in 2004, has evolved into an essential read for cinematographers and all those associated with the art of cinematography. Each carefully curated issue is packed full of expert insight that’s relevant whether you’re a seasoned veteran or at the start of your cinematography career. Their international, experienced team of journalists share expert analysis, news and insight into the major production centres around the world. Enjoy exclusive behind-the-scenes features on the biggest productions as well as a diverse array of creations from the worlds of feature films, TV, documentaries, commercials, and music videos. They showcase the world of cinematography’s outstanding and diverse talent in an array of interviews and profiles, and present expert comment from leading industry figures on both sides of the Atlantic. They reveal tricks of the trade in masterclasses led by esteemed cinematographers and share the up-and-coming creatives you should have on your radar. As everyone knows, production is a collaborative effort, so we also include in the pages the other talented people, plus dedicated service companies and manufacturers, who are engaged in the ever-evolving image-making pipeline – from camera into post-production and beyond. See all the back issues here NOTE: This is a single issue of the printed magazine. This is not a subscription.

Read more less

The Bondhus 15260 Hex Key comes with an ergonomic T-Handle with high durability and high torque allowing users to have ease when loosening and tightening.   FEATURES: Made from Alloy Steel giving it longevity  ProGuard finish protecting against moisture and general wear and tear 4mm Tip size and 9" in length  Welded handle/blade connection for increased strength

Read more less

Hook and loop tape comes on a sticky-back self-adhesive liner, making it simple to cut to your desired size. Ideal for endless projects. Adhesion offering an instant bond to most surfaces. Offered in 50mm width. Sold by the Metre or pack of 25 Metre Rolls Lengths cut will have a tolerance of up to 2cm per meter. Aka: Velcro

Read more less

This Large Shower cap useful for quickly covering small or larger sized cameras or lenses to protect them from water or dust. They are light weight, easy to use. They're strong and do not tear easily. At 0.04 mm -they're twice as thick as a regular disposable shower cap . The caps are considered disposable, but due to their strong construction - handled with care they may see many uses. Sold individually.

Read more less

ARRI Special Viewfinder Eyecushion, #3014 82mm x 73 mm / 3.25" X 2.9" Ultrasuede Provides a high level of softness for your face along with a superior moisture absorption rate. Ultrasuede is a 100% non-woven material made of intertwined, brushed, ultra-fine fibre strands, which creates a uniquely soft and smooth texture, much like natural chamois and suede. We offer a multitude of Ultrasuede colours for you to choose from. Ultrasuede Eyecushions can be used in any climate and beautifully contours to the shape of your eyecup. Since 1984, every single genuine Bluestar Eyecushion is carefully crafted and inspected one at a time to ensure a perfect, sanitary, safe and consistent Eyecushion, right here in our Toronto production studio. Our production and inspection staff are taught and updated on an ongoing basis to ensure consistency of our high standards. In a world where quality is commonly compromised for profit, we are proud to maintain our high standards and deliver to you a high quality Canadian made product. And interestingly, Bluestar Eyecushions have been tested by Nasa engineers for space use and could be the first Eyecushions sent to Mars. As the worldwide leader in the Camera Viewfinder Eyecushion market since 1984, Bluestar has become synonymous with Eyecup comfort around the world. NOTE: Exempt from return policy if packaging opened due to hygiene reasons.

Read more less

Duracell Procell AAA Batteries are designed for professionals and wholesale trade customers. These batteries are perfect for the trade. Duracell Industrial batteries are ideal for a range of devices, from torches to tv and film equipment and even some medical equipment. Duracell Procell batteries are practical and economical. Capacity: 1222mAhMaximum Height : 44.5mmMaximum Diameter : 10.5mmTypical Weight : 11.4g Procell AAA batteries, also known as: MN2400, PC2400, LR03, ID2400

Read more less

Standard 1/4-20 inch thread mount for cameras Replacement camera platform for the Magic Arm Made of aluminium Standard 1/4 thread for cameras

Read more less

A clear, double-sided, medical adhesive tape in strips, used to hold hairpieces to the scalp. Hypo-allergenic and waterproof, this high quality tape does not separate when removed. The back liner is slit for easy opening. Apply tape to the tape tab or perimeter of hairpiece and can be applied to the entire hairpiece interior for a secure hold.  1/2″ x 3″ strips for use on the edges of the hairpiece. For narrow areas and smaller hairpieces, trim to shape as needed. 1″ x 3″ strips for use in the front of the hairpiece, helping to blend the hairline. 50 strips per pack.

Read more less

Used when rigging lighting effects, these safety bonds provide a secondary flexible coupling in addition to the regular fixing. Ideal for use on stage or in pubs/clubs. Black PVC coated, galvanised steel cable Cable diameter: 3mm Screw-gate carbine hooks Working Load Limit (WLL): 25kg

Read more less