Staedtler Lumocolor non-permanent fine markers are a fast drying non-permanent marker containing water-soluble ink.
They are a universal marker that can be used on almost all surfaces and can be easily wiped off shiny & glossy surfaces with a damp cloth.
Staedtler Lumocolor non-permanent fine markers are available in eight brilliant colours and they can be easily refilled with Staedtler non-permanent refill ink.
The F fine tip writes approximately a 0.6mm line.
Features
Robust chisel tip permanent marker for almost any surface
Bonded fibre tip will retain its shape
Permanent and waterproof ink will mark on metal, wood, glass, card or plastic
Strong aluminium barrel
Line width: up to 6.0mm
The 1510 is arguably the most famous Peli Protector case. It's certainly the most popular. Sized to qualify as carry-on luggage with most airlines the 1510 features wheels and a retractable handle, making it a popular choice for individuals that often travel with expensive equipment, such as photographers.
This rugged case is available with or without pick 'n' pluck foam. A standard divider set or the TrekPak divider system are available separately for the 1510.
Lid organisers are also available which are particularly useful for making the most of all the space the case has to offer.
The case has two handles, one on the side and one on the top, as well as a retractable handle making it the perfect travel companion.
Rated IP67, the Peli 1510 is crushproof, waterproof and dustproof, making it the ultimate case for protecting any kind of expensive or fragile equipment.
Case Features
Airliner carry on size
Automatic pressure equalisation valve
Easy-open latches
Retractable handle
Rubber ‘O-ring’ seal
Scratch resistant
Solid wall design
Wheels
Dimensions:
Int. Length (mm) 514
Int. Width (mm) 288
Int. Depth (mm) 191
Ext. Length (mm) 559
Ext. Width (mm) 351
Ext. Depth (mm) 229
Lid Length (mm) 515
Lid Width (mm) 290
Lid Depth (mm) 45
Protection: Corrosion-proof, Crushproof, Dustproof, Waterproof
Buoyancy: Maximum (kg) 29.1
Certificates: Stanag 4280 / Defstan 81-41
IP Rating: 67
Security: Padlock hasps
Weight Empty (kg) 5.44
Weight With Full Foam Set (kg) 6.17
BlueStar Oval Extra Small Viewfinder Eyecushion #6010A smaller version of the Oval Small, sized for a close custom fit on ARRI eyecups. Goes on easily and conforms to the oval eyecup shape.Please note: this is a soft cover that fits over your camera's existing eyecup. It is not an eyecup, eyepiece or viewfinder itself.Why BlueStar?BlueStar eyecushions have been a favourite of camera operators on film and TV sets around the world since 1984. Every one is handmade and individually inspected in Toronto, Canada, so you get a consistent, well-finished cushion every time.
All-day comfort: a soft, cushioned facing between your eye and a hard rubber eyecup makes long days on the eyepiece far more comfortable.
Hygienic: your own washable cover means you are not sharing an eyecup with every operator who has used the camera before you. Ideal for rental and shared kit.
Absorbs sweat: soaks up moisture so it stays off your eye and away from the eyepiece.
Protects the eyecup: keeps skin oils, make-up and sun cream off the camera's rubber eyecup.
Quick to fit: stretches over the eyecup in seconds and comes off easily for washing.
Size: 90 x 74mm (3.5" x 2.9")Compatible with:
ARRI: all ARRI eyecups, new and old, including Alexa, Alexa Mini, Amira, 235, 435, 535, SR2, SR3
Blackmagic Design: URSA with the original eyecup fitted
Bolex: H16, RX5 (depends on the eyecup fitted; please check your eyecup dimensions before ordering)
Check the fit before ordering: camera compatibility is a guide only, based on the manufacturer's sizing information, and a fit cannot be guaranteed. Eyecups vary between camera versions and accessories, so please measure your eyecup and check it against the size above. Can't find your camera, or not sure which size you need? See our BlueStar Eyecushion Size Guide or contact us.Returns: for hygiene reasons, eyecushions cannot be returned once the packaging has been opened, including if they have been tried on a camera and do not fit. Each eyecushion comes in a clear pack, so please hold the sealed pack up to your eyecup to check the size before opening. See our returns policy.Available options:Ultrasuede: Blue, RedUltrasuede: a soft non-woven microfibre with a suede-like feel and good moisture absorption. Suitable for use in any climate and available in a wide choice of colours and prints.Care: hand wash gently in lukewarm water and pat dry. Hot water or frequent washing may cause the facing to separate, so we recommend keeping a spare to swap in while one is being washed. For hygiene, eyecushions are for personal use only.
Features:
50 x Lens Tissue sheets, used for cleaning delicate Optical surfaces, microscopes, glass lenses and other instruments
Soft, thin, Lint-Free paper
Easy to remove sheets
Specifications:
Material: Wood Pulp
15x10cm
50 sheets per booklet
Soft to the touch, scratch-free cleaning
Absorbs Moisture
Designed for large drinks up to a 3.75”/95mm in diameter including cups, mugs, glasses, koozies, tumblers and more. Perfect for Nalgene, Hydroflask, Yeti, RTIC, Contigo, Thermos and Camelbak.
Attach using the provided two straps and tighten snugly to secure. Remove all existing straps from the RoboCup before attaching the Plus. For a more permanent attachment (not provided), use a stainless steel hose clamp for the top strap but be sure to not over-tighten and use a plastic cable-tie for the bottom strap.
The position of the Plus can be swiveled around the RoboCup for ideal placement. Tall wall height (4”/101mm) holds drinks securely and the top rim has a wavy design allowing convenient access for shorter drinks.
Double the RoboCup drink capacity by using two RoboCup Plus accessories. 1 included.
*The Robocup is sold seperatly.
Multi-Purpose Gaffer Tape - Sitting between a value and premium gaffer tape, This Utility provides good levels of durability and abrasion resistance whilst still being budget-friendly for high volume users.
Multi-Purpose High-Tak Adhesive - A high quality, rubber based adhesive provides very good grip onto a huge variety of clean, dry surfaces.
Water Resistant Coating - The polyethylene coating helps to repel water from the surface of the tape.
Use indoors and outdoors
High-performance adhesive
Water-resistant**
Durable construction
Ideal for temporary floor marking
Individually wrapped rolls
Easy to tear by hand
This tape performed well in residue tests. It peeled cleanly from surfaces including Steel, Wood, Glazed Tile, Carpet, Plastic and Vinyl, even after 60 days. There was minor residue on our rubber cable, but it was easily removed. While we of course can't guarantee it being completely residue/damage free in every situation, the performance we experienced was very good.*
*All tapes may leave residue on some surfaces, always test on a small area first.
** Once applied to most smooth, clean, dry, non-porous surfaces, free from dust, oil and other contaminants.
Joe's Sticky Stuff An Aggressive Pressure-Sensitive Adhesive Tape™ that got its start in front of the cameras of Hollywood and movie sets around the world. But you never saw it, until now.
You can use Joe's Sticky Stuff™ for any of the uses below. I have personally used it for all of these situations on camera, and lots of others!
Usage instructions: www.joeprops.com/how-to-use-it
On Set:
Temporary placement of props
Holding Microphones in place and under clothing
Temporary holding of costume
Residue free (test first)
At the Office:
Hang items for presentations in hotel conference rooms or clients offices without damage to walls or windows
Get that poster to finally stay up on your cubical wall
Change nameplates and signs without damaging wall coverings
At Home:Hang children's artwork without thumbtack holesUse as earthquake hold for artwork and shelf itemsKeep picture frames hanging straight and true without marring wallsDecorate kids' roomsKeep rugs and carpets from slippingHang holiday artwork or decorations anywhere in the house including windows
On the Job Site:Use Joe's Sticky Stuff™ to preset trim and molding while grabbing toolsMount items (such as drapery or mini-blinds) temporarily for visual approvalProtect floors with cardboard or sheet paper and not have it shift and slide under your feetApply plastic sheeting to job sites to contain dust and debrisPlace small screws or parts into Joe's Sticky Stuff™ until you are ready to use them
History
Joe's Sticky Stuff™ found its start in front of the cameras of Hollywood and around the world. I should know, I'm Joe and I put it there. But you never saw it.
On a Hollywood location set, if you need to hang a sign on a wall, you put it there temporarily. The problem is you may not own that wall, and when you leave, the wall must look like it did when you arrived.
In the past, people have used foam tape, blue tack and an automotive window ribbon called butyl. Butyl is a tar-based adhesive that is incredibly sticky but leaves horrible black stains on the walls, windows, floors and worst of all, your hands and fingers.
Shurtape Console Tape is a premium paper tape that is printable and removes cleanly.
Is ideal for use on sound and lighting boards.
Easily tearable by hand this tape also leaves minimal to no residue when peeling off and can be used for writing on without any fuss.
Features:
Can write on it.
Low/No Residue
Tearable by hand
Flexible
Resistant to water, oil, and solvents
Provides excellent adhesion
Meets LHAMA requirements for use in arts and crafts
Mid Brown ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty brown/green colour, a slightly greener shade than Dark Brown The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly.
Mid Brown – green muddy brown colour. Medium density and dries fast, great for finishing touches on set. When washed, leaves yellow/green stains on fabric, just like Dark Brown. Good for shading.
Usage Instructions:
Ensure surfaces are dry and grease free.
Mask areas not to be sprayed.
Shake can before use.
Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied.
Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed.
For small patches, spray through holes cut in a piece of paper.
For dark patches, spray closer to the surface.
Heavy spraying may drip or puddle.
Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces.
May not adhere to some polished surfaces.
Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining.
Do not use outside in wet weather.
Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.
Utility CAP IT! COVER made to take care of the little, but still important, things in life. This CAP IT! COVER is extremely versatile, offering supreme lightweight custom made protection against light, rain, VFX blood, dust, debris and other elements that may cause damage to your equipment.
Each package comes with 3 CAPS and 3 industrial rubber bands to help ensure an optimal fit. Simply put the CAP IT! COVER over what you need to protect. Next, secure with the band and go about your business.
Uses for the AKS CAP IT! COVERS include…
Small camera setups
DSLR rigs
17″ Monitors
Kit Bags
Block Batteries
Slates
Constructed of padded, hook and loop knit with a non-scratch nylon backing, these squares can be wrapped around lenses, tools, or anything else that will fit inside. Hook and loop tabs on all four corners let you wrap and stick them in any shape.
Features:
19 inch from corner to corner
Hook and loop for sealing off the corners
Ideal for colour co-ordinating
Non scratch nylon backing
Available in Black, Blue, Red, Yellow & Grey
These are available in three sizes: 11", 15" and 19"
Features:•Hex size 3mm•Grip T-handle is ergonomically shaped to reduce pressure points during continuous use.•Made of Protanium® steel and are up to 20% stronger than competitor product.•BriteGuard premium chrome-like finish is attractive, professional quality, and easy to clear.
Duracell Procell AA Batteries are designed for professionals and wholesale trade customers. These batteries are perfect for the trade. Duracell Industrial batteries are ideal for a range of devices, from torches to tv and film equipment and even some medical equipment.
Duracell Procell batteries are practical and economical.
Capacity: 3125mAh
Maximum Height: 50.5mmMaximum Diameter: 14.5mmTypical Weight: 24.7g
Size: AA (MN1500). 1.5V - 2.7Ah. Dimensions: 50.5mm (H) - 14.5mm (O) - Weight: 0.03 KG.
The AA size battery is also known as MN1500 PC1500 LR6 ID1500
9pc Hex Key Allen Key Set, Chrome Vanadium Steel with Holder – Metric
This 9 pc hexagonal Allen key set features a non-slip grip coating that helps maintain a strong grip when loosening bolts and reduces the potential for rust.
In addition to the short arm, a hexagonal ballpoint can be found on the long arm which helps you reach off angle screws - handy in confined spaces
Non-slip colour coded coating helps with organizing and identifying which Allen key you need to use for a project
Hex head sizes available in this set are 1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm and 10mm
The hex key holder features a hoop to attach either a large key ring or carabiner clip so you never lose your set. The holder also folds in half making it easy to store and travel with
Tool Specifications:
1.5mm: 65mmx17mm
2.0mm: 76mmx18mm
2.5mm: 84mmx20mm
3.0mm: 94mmx23mm
4.0mm: 108mmx25mm
5.0mm: 120mmx31mm
6.0mm: 139mmx33mm
8.0mm: 162mmx42mm
10mm: 178mmx50mm
The Allen Keys are made from CRV Chrome Vanadium Steel and come in different colours for each Allen key.
Examples of what you might want to use hex Allen keys for include video cameras plates, tightening tripod legs and furniture assembly.
Product Net weight: 390g (13.76oz)
Useful for holding tarps, poly etc in place.
Robust steel construction with a powerful spring mechanism and soft jaw pads to protect the gripped surfaces.
Heavy gauge metal frame, extra thick and durable PVC/rubber tip and grip.
aka, Pony Clip, Pony clamp.
Dark Brown ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty dark brown colour, a slightly redder shade than Mid Brown. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying.
Dark Brown – muddy brown colour. Medium density, and dries fast. When washed, leaves yellow/green stains on fabric, but this can be good when doing a sweat or dirt effect. Good for shading. If you are buying just one spray, then make it this one or Mid Brown. Both are good for an ageing base coat, or on its own for almost any type of ageing effect.
Usage Instructions:
Ensure surfaces are dry and grease free.
Mask areas not to be sprayed.
Shake can before use.
Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied.
Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed.
For small patches, spray through holes cut in a piece of paper.
For dark patches, spray closer to the surface.
Heavy spraying may drip or puddle.
Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces.
May not adhere to some polished surfaces.
Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining.
Do not use outside in wet weather.
Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.
The original KONDOR BLUE Mini Quick Release Plates have become a rigging essential and are ubiquitous throughout the industry. With micro revisions along the way, it was time to go back to the drawing board and create the ultimate Mini Lock for professional camera accessories.
Not only is the design overhaul smaller, lighter, and more feature-rich, but it is also compatible with the original Mini Quick Release male plates, anti-twist cradles, and ecosystem accessories. This allows users to upgrade with confidence knowing their initial investments have not gone to waste.
Mounting security is paramount. There are several pro mounting options for the male quick release plate:
Female ARRI style mountMale ¼ 20 ARRI style mount (3mm pins are removable and storable within the plate)NATO rail¼ 20 or ⅜ 16 receiving threads¼ 20 or ⅜ 16 mounting boltsAny of the above options combine with a centralized M4 set screwThe female Mini Lock receiver also received new mounting options. The receiving ⅜ 16 threads are now deeper for more security. Removable 3mm anti-twist ARRI style pins can also be added in either orientation. The outer profile continues to be compatible with KONDOR BLUE’s range of anti-twist cradles as well. Stainless steel mounting hardware for all the mentioned configurations is included with the kit.
Because of the tiny footprint of the Mini Lock, achieving tight tolerances is critical for secure locking. The safety latch—which still features its unique ability to stay fixed when open—now features an integrated M4 nylon tip set screw. Using the included 2mm hex tool, a user can fine tune the plate-to-plate fit by simply adjusting the set screw. The nylon tip smoothly glides along the surface of the male quick release plate removing any potential play, all without marring the surface.
Each line, cut, and engraving has carefully been considered to enhance the reliability of Mini Lock. Available in a variety of colourways, the KONDOR BLUE Mini Lock is the perfect solution for mounting crucial cinema accessories.
Features
Mini Quick Release Plate
Zero play, mini dovetail quick release system for rig accessories
Integrated NATO rail on male quick release plate
Versatile pro mounting solutions
Compatible with KONDOR BLUE’s original Mini Quick Release male plates
Weight: 39g/1.4 oz
Dimensions: 25mm W x 17mm T x 42mm D
Product Code: KONMLR
Elasticated cover. Clear.
Useful for quickly covering cameras setups to protect them from water or dust.
Extra Large. Up to 100-150cm diameter
Heavy gauge to ensure durability, while remaining lightweight.
Sold individually.
Dulling Spray is a fine, colourless spray used to reduce glare on reflective surfaces and minimize hot spots.
Semi-Matt has the same fine spray pattern as Matt, together with the same dulling effect, but retains the roundness of the subject.
All K-Line sprays are easily removed with a soft cloth or with a little light spirit. None are intended to be permanent - they are rapid aids with a maximum of safety.
400ml - Made in Britain.
Black Tac provides good adhesion to a wide range of substrates.
19mm Wide
2mm Thick
Very conformable due to soft composition
UV resistance.
Does not set and remains flexible.
Also known as Black Tack or Butyl tape.
Staedtler Lumocolor non-permanent fine markers are a fast drying non-permanent marker containing water-soluble ink.
They are a universal marker that can be used on almost all surfaces and can be easily wiped off shiny & glossy surfaces with a damp cloth.
Staedtler Lumocolor non-permanent fine markers are available in eight brilliant colours and they can be easily refilled with Staedtler non-permanent refill ink.
The 311 (S) superfine tip writes approximately a 0.4mm line.
