Double-Sided High-Tak Polyester Cloth it is a double-sided with an open weave and cloth tape with hot-melt adhesive on both sides.
FEATURES:
Size: 25mm x 50m
Strong and flexible.
The STANLEY® FATMAX® Xtreme™ 5M/16' Tape Measure contains a 32mm blade width for clear and legible markings.
Is class II accurate which provides a reassuring +/-0,5mm error tolerance at 1m, suitable for the majority of professionals.
Has an abrasion resistant polyester film coated blade which coating provides up to 10 times more resistance to abrasion than a standard lacquered blade with additional BladeArmor™ coating, reinforcing the first 7.5cm of the blade, the section most vulnerable to wear.
The tape measure features a 32mm blade width and an impressive reach of 4.9 metres The TRU-ZERO™ hook helps to achieve precise inner and outer measurements, moving back and forth along the securing rivets.
Highly polished chrome case with rubber grip to ensure slip resistant hold to withstand heavy use on the jobsite.
The tape comes with a large, protruding oversized multi-catch hook, significantly larger than a conventional hook and protruding on all edges - shaped to hook onto building materials with ease above, below and to either side.
The bright yellow STANLEY blade ensures enhanced visibility in most jobsite conditions.
Dulling spray is a fine, colourless spray used to reduce glare on reflective surfaces and minimize hot spots.
As the name suggests it gives a four times overall neutral cut, it can be sprayed on windows and transparent screens. Used extensively in the motion picture and television industries, it is an aid on small locations. Easily removed with a little methyl spirit.
All K-Line sprays are easily removed with a soft cloth or with a little light spirit. None are intended to be permanent - they are rapid aids with a maximum of safety.
400ml - Made in Britain.
Clean, reusable mastic adhesive with a multitude of uses
Ideal for sticking up maps, charts etc, or holding telephones, calculators etc firmly to desks
Non-toxic
Handy pack
Mitre Fast Bonding Kit is a two part instant adhesive system comprising a cyanoacrylate adhesive and aerosol activator. Mitre Fast is mainly used in the furniture, timber, kitchen and plastics industries where its instant bonding properties dramatically reduce assembly times for mitre joints when compared to conventional wood adhesives
Also suitable for bonding of MDF, rubber, PVCu, metals etc
Solvent based
Quick curing/drying
Timber, Plastic, Metals
Stabilo Boss Highlighters Chisel Tip 2-5mm Line Assorted (1 x Wallet of 4)
The original vibrant highlighter and Europe's Number 1
Line width: 2.0 - 5.0mm
Wedge tip draws broad lines, highlights and underlines.
Universal, water based ink for use on most paper
STABILO Anti-dry out ink technology : 4 hour cap off time
Easy to refill
Assorted: pink, orange, green and yellow
Writing length 375 metres
Wallet of 4
The Filmsticks Premium Clapperboard Kit is the ultimate tool for professional filmmakers, directors, and camera crews, ensuring precise shot logging and synchronisation. Used widely in the UK and European film industries, this kit is designed for maximum durability, efficiency, and reliability on set.
Made with all-weather ABS resin clapper sticks and high-quality acrylic board provide exceptional strength and longevity, making this kit suitable for both indoor studio productions and extreme outdoor shoots.
Designed with a tongue-and-groove insert, the clapper sticks ensure a secure, wobble-free fit, prevent light leaks when closed, and provide an audible, crisp clapping sound that is essential for audio sync in post-production.
Complete Kit for Professionals
The Filmsticks Premium Clapperboard Kit includes everything you need for a seamless filming experience:
1. High-Quality Acrylic Board
Glare-resistant, durable acrylic surface for easy dry-erase markings and clear visibility.
Precision-engraved layout for effective organisation of essential details like scene, take, roll, director, and date.
Compatible with all Filmsticks Clappersticks with a 3.5mm insert, allowing flexibility for slight thickness variations.
2. Filmsticks ABS Resin Clapperstick
Weatherproof, durable construction designed for long-term use in any filming environment.
Tongue and groove insert for gripping marking tape and preventing unwanted light leaks.
Secure closing mechanism to reduce side wobble for consistent performance.
3. Neoprene Cover - Flexible Clapperboard Protection
Soft yet durable material protects the clapperboard from scratches, dust, and minor impacts.
Lightweight and compact, making it easy to transport and store.
Flexible design allows for folding or rolling, ensuring convenient storage in your filmmaking gear.
4. 3M 1710 Tape for Board Fitting - Extra Secure Assembly
High-quality 3M 1710 Tape, designed specifically for board fitting.
Ensures a secure and reliable bond between the acrylic board and clapper sticks, preventing any unwanted movement.
Easy to apply to the acrylic board, providing extra stability for long-term use.
Strong adhesion with a clean finish, without leaving residue when removed.
Available Sizes & Specifications
Medium: 280mm x 190mm (11” x 7.5”)Small: 190mm x 129mm (7.5” x 5”)
Why Choose the Filmsticks Premium Clapperboard Kit?
Industry-Standard Quality - Used by professionals in film and television production worldwide.
Complete Kit for Filmmakers - Includes acrylic board, clapper sticks, neoprene cover, and board tape for a fully functional clapperboard setup.
Customisable & Versatile - Available in the EU/UK layout and two sizes (Medium and Small) to match your production needs.
All-Weather Durability - ABS resin sticks and acrylic board ensure long-lasting performance in any filming environment.
Reliable Performance in Any Setting - Built for studio, outdoor, and extreme weather conditions.
The Ultimate Clapperboard Kit for Filmmaking
The Filmsticks Premium Clapperboard Kit is designed for precision, durability, and ease of use, making it an essential tool for filmmakers, directors, cinematographers, and camera assistants. With the EU/UK layout, Medium and Small sizes, and all-weather durability, this clapperboard kit is built to handle the rigours of professional production.
Safety and Compliance (GPSR Requirements - EU):
This product complies with the General Product Safety Regulation (GPSR), ensuring safety for both professional and personal use.
Material Safety: Manufactured from non-toxic, lead-free, and durable materials in accordance with EU regulations, but certain parts of the clapperboard are made from plastic materials. If exposed to excessive heat, they may release harmful fumes.
Edge Protection: Smooth, rounded edges prevent accidental cuts or scrapes during handling.
Usage Guidelines:
Always hold the clapperboard by its edges when opening or closing.
Ensure fingers are clear of the clapping mechanism before use to avoid pinching injuries.
Use only markers that are compatible with the clapperboard surface to avoid damage.
Do not modify or disassemble the clapperboard, as this may compromise its safety and functionality.
Clean the clapperboard with a soft, damp cloth and mild detergent. Avoid abrasive cleaners or tools.
Store the clapperboard in a cool, dry place away from direct sunlight and heat sources.
Do not slam the clapperboard forcefully, as this may cause breakage or injury.
Residual Risk: When used according to the manual, risks are minimal. Click this link for the full safety manual guidelines -> https://bit.ly/4iRjeDA
Adherence to this safety guidance ensures compliance with the General Product Safety Regulation (GPSR) requirements. Declaration of Conformity Document -> https://bit.ly/44mBt01
URSA Premium Sticky Zeros are stickies with a hole - part of URSA's Premium 'Padded' Stickies range. Each zero is 0.5mm thin with a 14mm centre hole, designed for building wind protection rigs directly around lav mics and mounts.
Sticky Zeros provide a fast, reliable way to apply wind protection around URSA Circles, MiniMounts, Foamies and Chest Straps. You can stick two furs together around a Sticky Zero to create a ball-gag wind cover, or fold a single Zero with a fur attached around the end of a lav mic for quick, low-profile wind protection.
Key Features
Pack of 60 Premium Sticky Zeros.
0.5mm thin padded stickies with a 14mm centre hole.
Hypoallergenic, residue-free adhesive - safe on skin and fabrics.
Compatible with URSA Circles, MiniMounts & Foamies.
Testing testing. Introducing our bright and colorful Bars and Tone pin! Pin details: Soft enamel coated with a layer of epoxy. 1.5" Black nickel plated metal with two metal locking backs
3-IN-ONE High Performance Penetrant Spray 400ml The fast-acting formula of 3-IN-ONE High-Performance Penetrant loosens rusted or stuck parts, and works to remove grease and grime from a variety of surfaces It also helps prevent rust and corrosion It can be used on pipes, fittings, locks, chains, nuts, lug nuts, tools or almost anything else that needs loosening.
Freeing stuck and rusted bolts, nuts, hinges, threads, and chains
Preventing rust on parts, tools
Safe for use on plastics, rubber, and metal
It leaves behind a lubricant to keep things moving and helps prevents rust from re-forming
Use it for; Chains, Pipes, Nuts, Screws, Bolts, Taps, Toothed Wheels, Door Fittings, Lock Parts, Gates, Valves and Screw Caps
Customise your case layout with a TrekPak divider system. Using the innovative and sturdy design, TrekPak allows you to optimise space while maximising protection.
These handy individually sealed wipes contain a gentle solvent that is perfect for removing adhesive from devices.
They can also be used for removing the sticky residue that is sometimes left behind on the skin from some plasters and dressings, making it less traumatic for delicate and sensitive skin
These mini rolls come on a small core and are the perfect pocket size.
This super high quality Matt Non Reflective Gaffer tape comes with 100% cotton cloth content (120 mesh) and 100% natural rubber adhesive, with zero release coating. This makes the product our most environmentally conscious gaffer tape to date. Most inks used are plant based and ethically sourced.
100% natural cotton cloth
100% natural rubber adhesive
Plant based dyes
FSC approved packaging
No harmful chemicals used in making this product
Reduces your carbon footprint
This product adheres to any clean, dry surface and removes residue free. It’s ‘write on’ absorbent surface is ideal for the TV, film and entertainment business.
With this bundle, you will receive four rolls of Black mini tape. Each roll is 5m long.
Hey Cinematographer, no need to adjust your color settings. This is the color chart reimagined into an enamel pin.
Pin details:
Soft enamel
1.5" Black nickel plated metal with two metal locking backs
Let there be light! A staple on any production but this time it is reimagined as an enamel pin!
Pin Details:
Soft Enamel
1.25" Gold plated metal with two metal locking backs
The 50mm Atlas Orion T2 Anamorphic Lens reimagined into an enamel pin. In partnership with Atlas Lens Co.
Pin details:
Soft enamel
1.4" Gold plated metal with two metal locking backs
The CLW800 model is an LED work light with 800 lumens making it an ideal choice when working in dark or dimly lit environments.
Also comes with an high and low setting so can be customised to your choosing.
Installing 4 AA batteries can operate this unit for 5 hours and the battery cover has a rubber o-ring seal to protect and be used in light rain conditions.
Features:
800 Lumens
5 hours battery run time
High and Low modes
180 degree adjustable handle for hanging or free standing
1.5 metre impact resistance
Only uses 4 x AA batteries (not included)
LED: 2 x white LED
Focus: Fixed area lighting
Ingress protection rating of IP44
Made from heavy-duty polyethylene shield, Spiral Wrap provides protection for your cables, keeping them safe from damage and ensuring any installation stays neat and tidy.
Features:
Reusable - durable material provides longevity
Adjustable - can be cut to size
Measurements:
8mm diameter
5m length
The Hultafors FT30ME Futura Fibreglass Tape has both metric and imperial measurements.
Specification
Blade Length: 30m/100ftBlade Width
Features an integral hand grip
Easy winding
Corrosion resistant
Made in Britain
The Hultafors CC Fibreglass Long Tape contains a yellow fibreclass blade that is as strong and flexible as it is corrosion resistant.
The tape has a solid case made from ABS plastic making it durable
Available with metric and imperial measurements
Features:
Blade Length: 30m
Blade Width: 13mm
Accuracy: EC Class II
Metric and Imperial measurements
