Inside the robust aluminium barrel of each Pentel N50S permanent marker is quality Pentel indelible ink that writes smoothly on almost any surface from plastic and metal, to glass. The fine bullet tip is ideal for general purpose use in industry or commerce. The 3.18mm bullet tip writes between 0.5-1.0mm line width.
Robust slim aluminium barrels
Permanent marker
Bonded durable tips retain their shape
Fine bullet point tip for precise lines
Will write on almost any surface including wet and oily
Robust aluminium barrel
Suitable for rough or smooth surfaces
Writes on almost any surface from cardboard, metal, wood, plastic and glass.
Fine point creates line of 1.0mm
Ink Colour: Red
A latex-free, hypoallergenic paper tape that is gentle to the skin yet adheres well and leaves a minimal adhesive residue upon removal. An economical, general-purpose, breathable surgical tape.
Perfect for affixing microphones and mic cables to actors bodys.
Features and Benefits:
Gentle to the skin
Latex-free and hypoallergenic for sensitive patients
Highly breathable to maintain skin integrity
Holds well on damp skin for secure placement.
The Core CL80 Torch is the ideal compact torch for everyday use, This torch produces 80 lumens of white LED light which when used on a high setting can last for over 2 hours while also giving you the option to use a low or flashing mode to preserve the battery which is a single AA alkaline (Not included ). The sliding focus mechanism allows you to choose between a spot beam and a flood beam.
This torch features a wrist strap for added security and comfort of use.
Features:
Type: EDC LED torch
Operating Modes: High / Low / Flash
80 Lumens
Sliding focus mechanism
2.5 hour run time
Batteries Required: 1 x AA alkaline (not included)
Impact Resistance: 1.5 m
Focus: Spot to flood Beam
A paint receptive natural cloth tape. Ideal for stage, set and prop design where small areas and gaps need to be covered and painted.
The tape is also often used as a camera/mixer tape and can easily be written on with most pens.
Product Benefits:
Service Temperature of 60°C
Can be written on
Strong and durable
Easy to tear by hand
Good initial tack and ultimate adhesion
Easy unwind properties
Comfortable quality cloth tape
Abrasion resistant
Corrosion resistant
The waterproof 1020 Micro Case is one of the smallest Peli cases, perfect for protecting small valuables.
The Peli 1020 is watertight, crushproof and dustproof. It comes with a rubber-liner that provides protection whilst also doubling up as the o-ring seal.
The case is available with or without pick 'n' pluck foam, and in black or yellow, with a clear or solid lid. The lid has an easy open latch for quick access and the case comes with a free carabiner for convenient attachment.
Case Features
Automatic pressure equalisation valve
Carabiner
Rubber liner
Scratch resistant
Dimentions:
Int. Length (mm) 131
Int. Width (mm) 86
Int. Depth (mm) 41
Ext. Length (mm) 162
Ext. Width (mm) 121
Ext. Depth (mm) 54
Lid Length (mm) 131
Lid Width (mm) 86
Lid Depth (mm) 17
Protection: Crushproof, Dustproof,
Waterproof Buoyancy Maximum (kg): 0.34
IP Rating: 67
Weight Empty (kg) 0.26
Weight (kg) 0.26
Weight with Foam (kg) 0.3
High matt verdigris corroded copper effect paint.
Green/blue shade.
Water soluble to easily tone back effects for the perfect result.
Click here for Usage Instructions
MOUNTING A LavALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER.
The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings.
These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style.
It can also be sewn into costumes by the costume department for daily repeated use.
Note: It’s important to note that this Lav Concealer is for the older style ME 2 and ME 2-US lav mic (Sennheiser G2/G3), in which you are able to remove the metal pop-shield. It is designed for use without this metal pop-shield.
Lav CONCEALER FEATURES
CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner.
SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule.
COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding.
WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule.
EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it.
CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets.
ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring.
The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule.
It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer.
WHAT’S INCLUDED:
1x Rubber Lav Concealer (Black/White)
1x Metal Clothing Clip (Black/Silver)
1x Wire Fabric Guard (Black/Silver)
1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models)
6x Lav Concealer Tape
The Bubblebee Microphone Accessory Case is a tough, protective microphone box with multiple compartments for accessories. Each compartment has a lid that keeps its contents safe and separated for easy access.
The top of the Mic Accessory Case has the Bubblebee Logo imprinted with our slogan, "Making Sound Sound Better".
Package contains two (2) Mic Accessory Cases.
Pack contains 2 x strong ABS moulded cases
Stainless steel reinforced hinge
5 Independant accessory compartments
1 large compartment for a lavalier microphone
Transparent so you can see the contents
"Making Sound Sound Better" printed on the front
Features:
Size - 3/16" with a 6" long T-Handle
Made from a high torque steel to provide extra strength when removing troublesome rusty screws
The black ProGuard finish has a special surface to prevent moisture
Comes in the colour yellow
URSA Fur Tangles let you treat areas of noisy fabric close to your lav mics with fur to reduce fabric friction sounds.
Use scissors to cut your own shapes from the 60x15cm sheet of super-soft, 14mm length fur. Combine with URSA's hypoallergenic Sticky Strips to create sticky-backed fur you can apply directly to clothing, or use as wind protection around uniquely shaped mic rigs - such as car rigs, where extra-large cuts of fur may be required to surround the mic.
What's Included
1x 60x15cm furry rectangle.
Key Features
Super-soft, 14mm length fur.
Cut to any shape with scissors.
Pairs with URSA Sticky Strips for stick-on application to clothing.
Available in Beige, Black & White.
See also URSA Furry Strips, which combine Sticky Strips and fur into a ready-made sticky strip of fur that is quick and easy to apply.
The URSA Back Strap is designed to hold wireless transmitters or receiver packs snugly against the centre of the back, between the shoulder blades – ideal for theatre, sports & live performances.
Key Features
Holds transmitters or IEMs securely between the shoulder blades.
Transmitter aerial can face up or down depending on setup preference or interference considerations.
Adjustable gripper straps secure the Back Strap comfortably on different chest sizes – no slipping or shifting during movement.
Made from URSA's OEKO-TEX certified hypoallergenic material for all-day wear directly against skin.
Available in Small, Medium or Large, in Beige or Black.
Machine washable at 40°C with detergent. Hang to air-dry or tumble-dry on low heat.
Sizing
Choose the size that best fits the wearer's chest circumference:
Size
Chest Size Range
Small
32″–36″ (approx. 81–91cm)
Medium
36″–40″ (approx. 91–102cm)
Large
41″–45″ (approx. 104–114cm)
The adjustable straps ensure a secure fit for a variety of body shapes and sizes.
The Peli 1030 Micro Case is available in black or yellow, with a solid or clear lid.
The 1030 has an interior rubber liner for extra protection, which also doubles up as the o-ring seal helping to keep the case watertight (IP67).
The case has an easy open latch and an automatic pressure equalisation valve so it'll always be easy to open, even after changes in air pressure.
Case Features
Automatic pressure equalisation valve
Carabiner
Rubber liner
Scratch resistant
Dimentions
Int. Length (mm) 161
Int. Width (mm) 64
Int. Depth (mm) 49
Ext. Length (mm) 190
Ext. Width (mm) 98
Ext. Depth (mm) 62
Lid Length (mm) 161
Lid Width (mm) 64
Lid Depth (mm) 17
Protection: Crushproof, Dustproof, Waterproof
Buoyancy Maximum (kg): 0.45
IP Rating: 67
Weight Empty (kg) 0.27
Weight (kg) 0.27
Weight with Foam (kg) 0.3
Your 3rd Skin.
A raw grit workman's glove. Specially selected, double-layered goat skin hide creates an exceptional defence for the palm of your hands. A one-piece palm base combines with an articulated second layer to allow optimum freedom of movement as you work. Dirty Rigger select leather delivers a natural ability to resist friction, providing a barrier for your hands when working with rope, cables and staging. A lighter back on the glove minimises heat build-up and helps maintain a comfortable flow of air as you work.
Genuine leather palm
Ultra-durable, double-layered leather palm
Articulated second layer for freedom of movement (palm side)
Double stitched seams
Breathable glove back to relieve heat
Snug fit to minimise snagging
Write-on ID tag
This glove is currently undergoing PPE testing and should be considered suitable for general use in the meantime. For specific PPE requirements please refer to our specialised PPE range.
The Roughneck heavy-duty plastic hand clips have a robust nylon construction.The pivoting soft jaw pads protect work pieces and the hand clips feature a powerful spring mechanism.
Useful for holding tarps, poly etc in place.
Available in 3 sizes, 1" (25mm), 2" (50mm) and 3" (75mm)
Also known as a Pony Clip
Waterproof and flexible in sub zero temperatures.
Durable and flexible.
There is also a UV inhibitor in the PVC to ensure the material does not degrade prematurely due to the effects of the sun.
The vinyl material is approximately 0.25mm in thickness, and the hems of each tarpaulin are finished with a white banding.
Aluminium eyelets come at 50 cm intervals.
These Steadicam covers are perfect for keeping dust and light rain off your rig and camera and head when they are not in use.
With a pull cord at the bottom to secure the cover in place.
It comes with an elastic strap for hand storage and quick deployment.
Reversible, with a black exterior and silver inside to help reflect heat/sun.
Measures 125cm opening x 150cm height.
Comes with a small black bag for easy storage and carrying.
Bosmere PROTECTOR 6000 Covers provide protection against the corrosive effect of extreme weather conditions and general dust and grime whilst remaining stylish and contemporary.
Offering complete weather protection and featuring brass eyelets with bungee ties for secure fixing.
The Perfect dolly cover to ensure your film equipment is protected from the elements.
FEATURES:
All weather protection Wipe clean surface
UV stabilised to reduce fading
Durable polyester fabric
Brass eyelets with heavy duty bungee ties
PVC-free backing Bosguard
water-repellent coating
6-year Manufacture guarantee
Length 155cm, Width 61cm and Height 97cm
Heavy-duty elastic design provides constant tension and a firm hold. Offering quick, convenient load binding with non-marring high strength hooks to eliminate knots.
12mm (1/2in) diameter provides maximum holding power and is ideal for a variety of uses.
Features & Benefits
All keys are marked per as their size for easy selection.
Standard hex keys in high tensile steel for long life.
8-piece hex key set 1/16 - 1/4
The #1 longest-lasting AAA batteries in high tech devices
Weighs 1/3 less than standard alkaline batteries
Performs in extreme temperatures from -40°F to 140°F
Holds power for 20 years in storage
Guaranteed leak-proof construction (based on standard use)
This multiple pack contains ten new Energizer Ultimate Lithium AAA 1.5V cells, also known as size LR03 or L92. Packed with performance, Ultimate range batteries weigh approximately thirty per cent less than typical alkaline equivalents, making them ideal for portable devices with occasional high current drain – such as digital cameras, shavers and trimmers. Other applications include computer mice, game controllers, audio players, wireless keyboards and remote controls, where they provide extended service – up to eight times longer than standard replacements.Advanced manufacturing technology means these versatile AAA/LR03 lithium batteries deliver reliable power even in freezing and sweltering outdoor conditions. The recommended temperature limits are -40°C (minimum) to 60° Celsius (maximum). Superior leak resistance and a shelf life of up to twenty years mean that Energizer lithium AAA/L92 batteries are an excellent all-round option.Energizer Ultimate Lithium 1.5 Volt AAA cells are direct replacements for product codes MN2400, MX2400, PC1500, AM4, K3A and 4003. Light in weight at only 80 grammes, each battery measures 44.5 millimetres in height by 10.5 millimetres in diameter.
These batteries conform to the international standard of IEC 60086-4.
