The Core Lighting CLH200 rechargeable head torch offers a maximum output of 200 lumens with a beam range of 55 metres distance from a 3 W cree LED.
The left hand power button operates the torch normally and each press will cycle through high, mid, low and off, while holding the button down in any state will access the SOS mode.
There is also a sensor control switch so that the torch can be turned on and off by waving your hand in front of the torch (within 15 cm range), which is perfect for when you're carrying out tasks where your hands may be dirty so you don't want to touch the torch. To operate the torch with sensor control you can activate it by pressing the right button either while the light is on in any mode to use a particular setting, or if pressed from off it will only access the high output. Pressing either button will turn the sensor mode off.
Powered by a built in 1200 mAh lithium polymer rechargeable battery, the CLH200 has a run-time of 5 hours. Recharging the unit is easy, simply insert the micro USB cable into the underside of the head torch (with the torch turned off) and the other end into a USB power source. To show charging is in progress a red LED will illuminate and turn green to show charging is complete after approximately 4 hours.
The high visibility yellow buttons means that they are easier to be seen, which is useful when working in an industrial environment. The fully adjustable nylon headband is comfortable on the head and a hinged bracket allows the head torch to be adjusted downwards within a 45° angle so you can direct the light source where you need it most.
Product Features
USB rechargeable
Rotational head
Sensor control
Adjustable and comfortable head band
Technical Details
Operating Modes: High / Mid / Low / Strobe / Motion Sensor
Luminous Flux: Up to 200 lumens
LED: 1 x white LED
Focus: Fixed focus
Beam Range: Up to 55 m
Run Time: Up to 5 hours
Charging Time: 4 hours
Batteries Required: Built in lithium polymer rechargeable battery x 1
Weight: 50 grams
Dimensions: 50 x 30 x 36 mm
Switch Type: Push button / sensor
Impact Resistance: 1.5 m
Warranty: 1 year
Packaging and Contents Supplied in retail packaging and includes:
Core Lighting CLH200 head torch x 1
Micro-USB charging cable x 1
Manual x 1
Tunnel tape has adhesive only on the outer zone edges to create a tunnel to protect cords, cables and wires from the adhesive material.
SKU number is RS197
Also known as Slipway Tape
URSA MiniMounts are slim, low-profile lav mic mounts designed to be rigged where larger square or round mounts cannot be hidden effectively.
Each mount is made from hardened plastic that does not deform or snap under pressure, and is hand-finished for the smoothest possible surface, allowing fabric to glide silently over the mic.
Microphone Compatibility
MiniMounts are microphone-specific - select the model to match your lav mic:
Brand
Compatible Models
DPA
4060 Core+, 2061, 406X, 606X, 4660HD
Sanken / Deity
COS11 / W.Lav Pro
RODE
LAV Mic Go & LAV Mic II
Sennheiser
MKE1, MKE2 & ME2
Shure
Twinplex
Sony
ECM-V1 / D11
URSA makes two mount shapes for the DPA 606X: a regular rectangular shape and a super-small 15mm circular model (the Circular MiniMount).
What's Included
1x MiniMount for your chosen microphone.
5x MiniMount Stickies.
Key Features
Slim, low-profile design for rigging where larger mounts cannot be hidden.
Hardened plastic that does not deform or snap under pressure.
Hand-finished smooth surface so fabric glides silently.
Available in Beige, Black, Brown & White (colour range varies by mic model).
This essential tool for hiding the Røde Lavalier II microphone will revolutionise your video content.Enhance your video content and discreetly conceal your microphone like a pro with The Lav Concealer for the RØDE Lavalier II.
The Lav Concealer for the RØDE Lavalier II is a versatile, discreet mount that easily adapts to different surfaces for a seamless fit. Crafted from soft rubber and precisely shaped for the RØDE Lavalier II, it pairs perfectly with the RØDE wireless PRO kit. Designed by Bubblebee Industries, this industry-leading lapel microphone mount reduces clothing noise and acts as a shock absorber, shielding the microphone from vibrations and friction for clearer, superior sound. All of this is achieved while keeping the microphone completely concealed.
Available as a single Lav Concealer in either Black or White, or a 6-pack with 3 x black and 3 x white Lav Concealers.
This Lav Concealer is a custom mount for the RØDE Lavalier II that fits the capsule snugly, making it easier to conceal the mic while protecting it from glue build-up caused by repeatedly taping directly to the mic. Like the RØDE Lavalier II, the Lav Concealer is designed to be ultra-low profile, sitting flush under clothing for discreet, professional-quality audio capture. It can be attached directly to skin or clothing using Lav Concealer Tape, which is strong, hypoallergenic, and easy to apply, ensuring secure mounting on fabric or skin without worry.
The Lav Concealer is made from biodegradable natural rubber, offering an eco-friendly choice you can feel good about. The soft, flexible rubber excels at absorbing vibrations, outperforming harder materials like plastic, and reducing unwanted noise from reaching the lapel mic capsule. The Lav Concealer for RØDE Lavalier II also includes a colour-matched fabric guard and clothing clip made from sprung metal, which attach through small holes on the front and back of the concealer. The combination of rubber and metal works together to block friction and vibrations from transferring to the mic capsule, ensuring clearer sound.
FEATURES:
- CREATES SPACE:Prevents fabric from touching the RØDE Lavalier II capsule in confined spaces under or within clothing, protecting the lapel mic from friction noise and vibrations for cleaner, clearer recordings.
- SHOCK ABSORBING:The moulded rubber concealer provides outstanding absorption of vibrations and friction, while the metal clothing clip and fabric guard blocks vibrations from passing through the concealer to the microphones capsule.
- COLOUR OPTIONS:Available in matte black or matte white finish. The matte finish is non-reflective for discrete hiding.
- WIRE FABRIC GAURD:The removable wire fabric guard prevents fabric from contacting the capsule. Together, the wire and rubber materials effectively absorb friction, preventing any transfer of friction to the mic capsule.
- CLIP, TAPE, OR SEWN MOUNTING OPTIONS:Offers multiple quick and efficient mounting options for RØDE Lavalier II mics on talent, even in high-pressure on-set situations.
- ENVIRONMENTALLY SOUND:The Lav Concealer is crafted from 100% natural, biodegradable rubber, making it environmentally friendly. Both the black and white versions are coloured without the use of harmful chemical compounds.
WHAT'S IN THE BOX?
his essential tool for hiding the Røde Lavalier II microphone will revolutionise your video content.Enhance your video content and discreetly conceal your microphone like a pro with The Lav Concealer for the RØDE Lavalier II.
The Lav Concealer for the RØDE Lavalier II is a versatile, discreet mount that easily adapts to different surfaces for a seamless fit. Crafted from soft rubber and precisely shaped for the RØDE Lavalier II, it pairs perfectly with the RØDE wireless PRO kit. Designed by Bubblebee Industries, this industry-leading lapel microphone mount reduces clothing noise and acts as a shock absorber, shielding the microphone from vibrations and friction for clearer, superior sound. All of this is achieved while keeping the microphone completely concealed.
Available as a single Lav Concealer in either Black or White, or a 6-pack with 3 x black and 3 x white Lav Concealers.
This Lav Concealer is a custom mount for the RØDE Lavalier II that fits the capsule snugly, making it easier to conceal the mic while protecting it from glue build-up caused by repeatedly taping directly to the mic. Like the RØDE Lavalier II, the Lav Concealer is designed to be ultra-low profile, sitting flush under clothing for discreet, professional-quality audio capture. It can be attached directly to skin or clothing using Lav Concealer Tape, which is strong, hypoallergenic, and easy to apply, ensuring secure mounting on fabric or skin without worry.
The Lav Concealer is made from biodegradable natural rubber, offering an eco-friendly choice you can feel good about. The soft, flexible rubber excels at absorbing vibrations, outperforming harder materials like plastic, and reducing unwanted noise from reaching the lapel mic capsule. The Lav Concealer for RØDE Lavalier II also includes a colour-matched fabric guard and clothing clip made from sprung metal, which attach through small holes on the front and back of the concealer. The combination of rubber and metal works together to block friction and vibrations from transferring to the mic capsule, ensuring clearer sound.
FEATURES:
- CREATES SPACE:Prevents fabric from touching the RØDE Lavalier II capsule in confined spaces under or within clothing, protecting the lapel mic from friction noise and vibrations for cleaner, clearer recordings.
- SHOCK ABSORBING:The moulded rubber concealer provides outstanding absorption of vibrations and friction, while the metal clothing clip and fabric guard blocks vibrations from passing through the concealer to the microphones capsule.
- COLOUR OPTIONS:Available in matte black or matte white finish. The matte finish is non-reflective for discrete hiding.
- WIRE FABRIC GAURD:The removable wire fabric guard prevents fabric from contacting the capsule. Together, the wire and rubber materials effectively absorb friction, preventing any transfer of friction to the mic capsule.
- CLIP, TAPE, OR SEWN MOUNTING OPTIONS:Offers multiple quick and efficient mounting options for RØDE Lavalier II mics on talent, even in high-pressure on-set situations.
- ENVIRONMENTALLY SOUND:The Lav Concealer is crafted from 100% natural, biodegradable rubber, making it environmentally friendly. Both the black and white versions are coloured without the use of harmful chemical compounds.
WHAT'S IN THE BOX?
Single Packs:
1x Rubber Lav Concealer for RØDE Lavalier II (Black/White)
1x Wire Clothing Clip (Black/Silver)
1x Wire Fabric Guard (Black/Silver)
6x Lav Concealer Tape
6- Pack:
6 x Rubber Lav Concealer for RØDE Lavlier II (3x Black/3x White)
6 x Wire Clothing Clip (3x Black/3x Silver)
6 x Wire Fabric Guard (3x Black/3x Silver)
36 x Lav Concealer Tape
1x Rubber Lav Concealer for RØDE Lavalier II (Black/White)
1x Wire Clothing Clip (Black/Silver)
1x Wire Fabric Guard (Black/Silver)
6x Lav Concealer Tape
6- Pack:
6 x Rubber Lav Concealer for RØDE Lavlier II (3x Black/3x White)
6 x Wire Clothing Clip (3x Black/3x Silver)
6 x Wire Fabric Guard (3x Black/3x Silver)
36 x Lav Concealer Tape
We have created a very special limited edition Bars and Tone Pride themed pin in partnership with the It Gets Better Project to celebrate and honor the LGBTQ+ filmmaking community.
10% of the sale of this pin will go to the It Gets Better Project whose mission is to uplift, empower, and connect LGBTQ+ youth around the globe through powerful storytelling campaigns, programming and community building initiatives. Learn more at ItGetsBetter.org
Pin details:
Soft enamel coated with a layer of epoxy.
1.5" Black nickel plated metal with two metal locking backs
This Hultafors FI10ME C Futura Fibreglass Long Tape has both metric and imperial measurements.
Specification: Blade Length: 10m/33ft Blade Width
13mm Accuracy: EC Class II
An interfold Brag box of Easi-Wipes SFC60 Steadfast Lite Wipers, containing 200 sheets (30cm x 42cm).
Lightweight versatile wipers that can be used for a number of different applications.
These reusable wipers are strong enough to remove oil, debris and scrub off adhesive.
They are also solvent resistant, low linting and provide good absorbency, making them effective when both wet and dry.
The ColorChecker Classic Mini is a small, handy, pocket-sized target measuring 63.5 x 109.0mm. Designed for on-the-job convenience, it’s great for location shots as well as the following scenario’s and more.
Digital Photography: Check images, output, monitors.Traditional Photography: Check films, lights, filters and paper.Graphic Arts: Check any printing or proofing process.Digital Imaging: Check scanners, monitors and proofing devices.Cinematography: Television and video: check cameras, monitors, lights and film.
ColorChecker targets are ideal for creating custom camera profiles (DNG and ICC), correcting neutral balance and exposure, and provides a standard for colour corrections.
The targets provide a non-subjective standard of comparison to help determine the true colour balance of any colour rendition system. It provides the needed standard for comparing, measuring and analysing differences in colour reproduction in various processes—avoiding costly mistakes.
Replaces the X-Rite ColorChecker Mini (MSCCMN-RET)
A standard 24-patch ColorChecker target in an handy credit card size
6 greyscale patches; RGB and CMYK colours and a mix of everyday colours for great results
Can be used with the ColorChecker Camera Calibration software to create ACR or ICC profiles
If you're looking for a superb solution for organising the most common household tasks, look no further! Whether you're planning to label folders, stickers on bottling jars or children's lunchboxes, the long-lasting, smudge-proof, wear-resistant edding 3000 permanent marker works on almost all materials. In addition, the round nib allows an even distribution of ink. You'll be impressed by the high-quality aluminium barrel and the long-lasting results in equal measure!
This quick-drying, low-odour lightfast edding comes in a wide range of colours and works equally well on plastic, wood, metal, glass or cardboard. It's the perfect assistant for your everyday tasks, and fits as neatly in any kitchen, study or workshop as it does in your hand.
Features:
Durable and resistant to smudging and fading
Bullet tip
Tip Width: between 1.5 and 3mm
Quick drying
Odorless and lightfast
Refillable
Recommended use: marking and writing on almost any material (wood, leather, aluminium, metal, plastic, glass or cardboard).
In the world of sound production, audio recordings or video content creation, hiding mics can present many challenges, such as clothing rustle, wind, or cable noise. The Mic Hiding Kit for Sennheiser ME 2-II is tailored for all needs; offering a selection of essential tools to discreetly conceal your Sennheiser ME 2-II lavalier mic for clear and professional-sounding audio. With this kit, you can try before you buy, ensuring you find the perfect solution for your needs.
THE LAV CONCEALER FOR SENNHEISER ME 2-IIThis super soft, pliable mount is excellent at hiding your Sennheiser ME 2-II (Sennheiser G4, AVX, XSW-D or EW-D), whilst reducing any unwanted clothing noise and absorbing vibrations. It can be sewn, clipped on or taped to the talent or costume with the included accessories.
The metal fabric guard ensures you keep an all-important space around the microphones capsule for optimal audio clarity, whilst the combination of the rubber and metal aides the reduction of vibration transference from the concealing layer of fabric to the microphone.
This kit includes both black and white Lav Concealers for Sennheiser ME 2-II, allowing you to adapt the lapel mic mount to different costumes and fabrics.THE LAV CONCEALER TAPEDouble-sided hypoallergenic tape perfect for securely mounting The Lav Concealer to clothing or directly onto the skin. Ensuring reliable placement even where clips aren’t feasible, maintaining discreet microphone positioning.
THE INVISIBLE SKIN TAPEBreathable and sweat proof, this tape offers a discreet low-profile solution for effortlessly managing your lavalier microphone cable. The matte, skin-like finish allows for easy makeup application, allowing you to discreetly conceal your lapel mic cable in plain sight.
THE MIC ACCESSORY CASEProviding an organised, protective and robust solution for keeping all your Sennheiser ME 2-II Mic Hiding accessories together. The six different compartments and transparent material ensures separation of accessories, allowing for easy access.
Please note that this is for the more recent ME 2-II (which now Sennheiser refer to as “ME 2”) mic which has a permanently affixed pop-shield.
The Samas Tool Chest Radio is designed to hold your work accessories during shooting. You can insert your air canister and other useful tools. It is suitable for all sizes since the crossover elastic placed behind allows easy adjustment to your body. The opening is magnetic and quiet.
The Samas Belt can be worn by everyone, it is adjustable and can be adjusted according to your size. It has a breathable fabric (air space) and is padded with a 1cm thick rubber layer. Technical features include Waterproof 1000 denier Cordura exterior and air space tissue.
The Samas Bag SCC_38L is a rigid frame, spacious and compact case that can be used for a comfortable transport of all accessories and work tools. Thanks to the rigid internal padding, it is very resistant, creating a solid frame to protect your equipment. To accommodate all necessary accessories, this bag has various pockets and compartments on both the inside and the outside. It is equipped with adjustable internal dividers and small removable transparent pockets. You can also insert the air canister in the pockets provided. You can lift it easily thanks to the comfortable side handles in suede. The application of the trolly allows an easy and rapid transport. Exterior L66cm x H41cm x W46cm Interior L42cm x H33cm x W25cm *TROLLY SOLD SEPARATELY https://www.cinestore.co.uk/collections/all/products/trolley-for-scc-38l-48l-55l-mua_02
Viviana Dot stickers are low-profile hypoallergenic tape featuring a 1mm foam layer sandwiched between super sticky tape that can be used on skin and fabric.
This configuration creates an additional barrier between lavalier microphones and fabric, effectively preventing rustling noise.
They are skin-safe, clothing-friendly, and leave no residue.
The Viviana Dot Premium are available in packs of 30 pieces, 70 pieces, and 120 pieces and are also compatible with Bubblebee Lav Concealers, Ursa Mini Mounts and DPA Concealers.
The Viviana Beetle is a new concept low-profile concealer made for the Sanken COS11.
Constructed of injection molded plastic, the Viviana Beetle guarantees quality and strength.
The Viviana Beetle is compatible with all Beetle accessories including the Beetle Bra clip and Beetle Vampire clip, providing maximum versatility and ensuring high quality sound.
The Beetle is the core element for Viviana's modular range, available in White and Black.
Viviana Tape 60 Strips of double sided clear hypoallergenic tape.
Ideally suited to fix lav mics.
Perfect for use on skin or fabric without leaving marks or residue.
The Vivana Moleskin Roll is a super soft and stretchy custom made fabric.
It consists of a super sticky hypoallergenic sticky tape on one side that you can stick on skin and fabric without leaving any marks or residue.
It is great to use to camouflage lavs and reduce rustling.
The Viviana Skin comes in beige, white and black. Each roll is 100cm x 16cm.
The Leatherman Nylon Sheath Medium with four pockets is a solid nylon belt sheath for medium-sized Leatherman multi-tools such as the Wave, Charge, Rebar, and Wingman, These sheaths are designed for durability, reliability and easy use as well as being lightweight and having an easy belt attachment making this sheath reliable to keep your tools safe and secure.
Features:
Size: 4.25"x1.5"x0.8" (10.8x3.8x2.03cm)
Material: Nylon
Weight: 36g
Manufacturer's number: LP30/M
Fits:
Wave +
Charge +
Charge TTi +
Rebar
Wingman
Sidekick
Our fully customised printed Clapperboards are perfect for your longer running productions, special shoots or as a gift for a member of the crew as a small memento for their work on the production. They are also very popular with production companies as they can include their logo on the board.
A custom board normally takes around 3 working days from order to shipment.
Not included in the cost is any complex artwork prep (for example, designing a logo/graphics from scratch) or Major design revisions
Features:
Full CMYK Print and applied to the reverse of clear acrylic.
Backed with an additional layer for protection
Available in five sizes:
Nano - 76mm W x 70mm H
Tiny - 150mm W x 102mm H
Small - 190mm W x 129mm H
Medium - 280mm W x 190mm H (Most Popular)
Large - 380mm W x 258mm H
Note: Height measurement is the board without the sticks attached
Design:
The complete layout of the board can be printed to how you would like it. Including any graphics, logos, production title, Director and DOP names.
We can assist with applying graphics onto the board template, however anything over and above this, including editing graphics, may be chargeable.
Order Process
Place Order on our website.
We can provide a PDF or Illustrator template for to work from. (Email team@cinestore.co.uk with your order number). The final graphics need to be provided in high-res format, Preferably 300DPI in PDF, SVG or AI. Ensure any fonts are embedded or converted to outlines. If you are unsure, send what you have and we can advise.
If you have a graphic and simply need us to insert it into a standard layout, please send it over and we will do this for no additional charge.
We will then check the design and send a proof to you for your approval.
Once you have approved the design, it will be sent to be produced. At this point, no further changes can be made.
Expect a minimum of three full working days from approval of the design for the board to be produced.
You will receive a notification when you order ships.
Important: Please ensure you have full permission for the use of any copyrighted/trademarked logos, fonts, graphics etc. By placing an order with us and sending the graphics we at CineStore will take is as that you have already been granted permission by the copyright holders.
Colours: Due to the nature of computer screens and differences in printers, you may find slight differences in the colour you expect and what our printers reproduce.
This is for a complete Clapperboard with sticks. Replacement boards without sticks are also available.
Custom clapperboards are non-returnable unless faulty.
aka; clapperboard, slate, clapper board.
For general purpose use only, non-critical applications. Cannot be used for any form of climbing or act as a safety harness or rigging.
Screw Closure ensures maximum security while still being easy to open
Manufactured using 7075 Aluminum Alloy, combining strength and being lightweight
Perfect for attaching keys, camera equipment, or water bottle to your backpack
Finished in a low-key charcoal black coating
Whilst the products are factory rated to 12Kn, we do not recommend this product is used for any form of critical or safety applications, and are supplied for general use only
Weight and Dimension:
Packing Dimension: 190mm (7.48") x 140mm (5.51") x 11.5mm (0.46"), 130g (4.59oz)
Product dimension: 80mm (3.15") x 45mm (1.77") x 15mm (0.59") 26g (0.92oz)
URSA MiniMounts are slim, low-profile lav mic mounts designed to be rigged where larger square or round mounts cannot be hidden effectively.
Each mount is made from hardened plastic that does not deform or snap under pressure, and is hand-finished for the smoothest possible surface, allowing fabric to glide silently over the mic.
Microphone Compatibility
MiniMounts are microphone-specific - select the model to match your lav mic:
Brand
Compatible Models
DPA
4060 Core+, 2061, 406X, 606X, 4660HD
Sanken / Deity
COS11 / W.Lav Pro
RODE
LAV Mic Go & LAV Mic II
Sennheiser
MKE1, MKE2 & ME2
Shure
Twinplex
Sony
ECM-V1 / D11
URSA makes two mount shapes for the DPA 606X: a regular rectangular shape and a super-small 15mm circular model (the Circular MiniMount).
What's Included
1x MiniMount for your chosen microphone.
5x MiniMount Stickies.
Key Features
Slim, low-profile design for rigging where larger mounts cannot be hidden.
Hardened plastic that does not deform or snap under pressure.
Hand-finished smooth surface so fabric glides silently.
Available in Beige, Black, Brown & White (colour range varies by mic model).
The Scan Breathable Microfoam Nitrile Gloves are manufactured from a knitted grey spandex liner with a microfoam nitrile palm coating. These gloves are suitable for use in many processes involving the handling of small metal or plastic parts, or any situation where high dexterity is required. Extremely light and breathable, the special microfoam coating offers a secure grip in both wet and dry applications, with no sticky side effect and is oil and grease resistant.
Lightweight, high dexterity construction
15g nylon / spandex liner
Oil and grease resistant
Highly breathable
Conforms to EN420 and EN388
