Cut your own applications from these 30 x 15cm Furry Rectangles of Super Soft 13mm length. The rear side of the fur is also very smooth and creates very little noise FurTangles provide wind protection and can help reduce clothing noise if applied between layers. More About URSA Fur Tangles Cut the furry rectangle into any shape you require then apply double-sided sticky tape to the back. Apply around microphone rigs to reduce the scratchy sound of hairy chests scratching against fabric. Simply stick a cutting of Available in Black, White & Brown.

Read more less

The Peli 1030 Micro Case is available in black or yellow, with a solid or clear lid. The 1030 has an interior rubber liner for extra protection, which also doubles up as the o-ring seal helping to keep the case watertight (IP67). The case has an easy open latch and an automatic pressure equalisation valve so it'll always be easy to open, even after changes in air pressure. Case Features Automatic pressure equalisation valve Carabiner Rubber liner Scratch resistant Dimentions Int. Length (mm) 161 Int. Width (mm) 64 Int. Depth (mm) 49  Ext. Length (mm) 190 Ext. Width (mm) 98 Ext. Depth (mm) 62 Lid Length (mm) 161 Lid Width (mm) 64 Lid Depth (mm) 17 Protection: Crushproof, Dustproof, Waterproof Buoyancy Maximum (kg): 0.45 IP Rating: 67 Weight Empty (kg) 0.27 Weight (kg) 0.27 Weight with Foam (kg) 0.3

Read more less

Your 3rd Skin. A raw grit workman's glove. Specially selected, double-layered goat skin hide creates an exceptional defence for the palm of your hands. A one-piece palm base combines with an articulated second layer to allow optimum freedom of movement as you work. Dirty Rigger select leather delivers a natural ability to resist friction, providing a barrier for your hands when working with rope, cables and staging. A lighter back on the glove minimises heat build-up and helps maintain a comfortable flow of air as you work. Genuine leather palm Ultra-durable, double-layered leather palm Articulated second layer for freedom of movement (palm side) Double stitched seams Breathable glove back to relieve heat Snug fit to minimise snagging Write-on ID tag This glove is currently undergoing PPE testing and should be considered suitable for general use in the meantime. For specific PPE requirements please refer to our specialised PPE range.

Read more less

High Quality D-SLR Brush manufactured in Germany. Supplied in handy storage tube with 3 Chamber swabs and instructions.

Read more less

Plaited Jute Sash Cords  Jute 8.5mm x 25m. Made with a natural, organic, plaited jute outer and a polypropylene core for strength and durability. Hard-wearing and remain strong when wet. Ideal for use primarily with sash windows but can also be used with ceiling airers, as a traditional jute washing line or a pulley line. Break Strain – 255kg (approx).

Read more less

Eneloop by Panasonic is the next generation of batteries. Pack of 4 Pre-Charged (Ready to use) AA 2500mAh Ni-MH Eneloop Pro Rechargeable Batteries. Charge up to an impressive 500 times, with an 85% capacity after 1 year. All Eneloop batteries are pre-loaded with solar energy and ready for use immediately after purchase. Ready-to-use for every day use, these Eneloop Lite batteries come pre-charged for your convenience. Designed for high drain devices.

Read more less

The #1 longest-lasting AAA batteries in high tech devices Weighs 1/3 less than standard alkaline batteries Performs in extreme temperatures from -40°F to 140°F Holds power for 20 years in storage Guaranteed leak-proof construction (based on standard use) This multiple pack contains ten new Energizer Ultimate Lithium AAA 1.5V cells, also known as size LR03 or L92. Packed with performance, Ultimate range batteries weigh approximately thirty per cent less than typical alkaline equivalents, making them ideal for portable devices with occasional high current drain – such as digital cameras, shavers and trimmers. Other applications include computer mice, game controllers, audio players, wireless keyboards and remote controls, where they provide extended service – up to eight times longer than standard replacements.Advanced manufacturing technology means these versatile AAA/LR03 lithium batteries deliver reliable power even in freezing and sweltering outdoor conditions. The recommended temperature limits are -40°C (minimum) to 60° Celsius (maximum). Superior leak resistance and a shelf life of up to twenty years mean that Energizer lithium AAA/L92 batteries are an excellent all-round option.Energizer Ultimate Lithium 1.5 Volt AAA cells are direct replacements for product codes MN2400, MX2400, PC1500, AM4, K3A and 4003. Light in weight at only 80 grammes, each battery measures 44.5 millimetres in height by 10.5 millimetres in diameter. These batteries conform to the international standard of IEC 60086-4.

Read more less

Specially developed for wigs and toupees. Very useful for application and concealment of Lav mics onto talent. This double sided, non-toxic, surgical quality tape is easily removed and kind to your skin.

Read more less

Ratchet Strap - endless - 1.5m

Read more less

Cotton Buds for cleaning in smaller and precise areas.

Read more less

Filmsticks T-Handle Slotted Screwdriver (10mm) A must for anyone working with cameras, this incredibly handy T-Driver makes tightening those tripod screws easy!  Say goodbye to 'making do' with the wrong tool! No more chewing up your camera screws. No more bashing your knuckles when tightening. This Professional 10mm Slotted Screwdriver with T-Handle Grip makes it easy to work quickly to ensure your screws are tight and your camera is secure Specifications: T-handle: ABS (Acrylonitrile Butadiene Styrene) Plastic Metal part: Carbon Steel 10mm Slotted Driver, 100mm (3.94in) shaft; 136mm (5.35in) Total Length Head Style: Flat (2mm width) Weight and Dimensions: 95mm x 136mm x 21mm (3.74" x 5.35" x 0.87") Approx 101g (3.56oz) net weight A popular alternative to the Facom T-Bar.

Read more less

The Core CL80 Torch is the ideal compact torch for everyday use, This torch produces 80 lumens of white LED light which when used on a high setting can last for over 2 hours while also giving you the option to use a low or flashing mode to preserve the battery which is a single AA alkaline (Not included ). The sliding focus mechanism allows you to choose between a spot beam and a flood beam.  This torch features a wrist strap for added security and comfort of use. Features: Type: EDC LED torch Operating Modes: High / Low / Flash 80 Lumens Sliding focus mechanism 2.5 hour run time Batteries Required: 1 x AA alkaline (not included) Impact Resistance: 1.5 m Focus: Spot to flood Beam  

Read more less

These mini rolls come on a small core and are the perfect pocket size. This super high quality Matt Non Reflective Gaffer tape comes with 100% cotton cloth content (120 mesh) and 100% natural rubber adhesive, with zero release coating. This makes the product our most environmentally conscious gaffer tape to date. Most inks used are plant based and ethically sourced. 100% natural cotton cloth 100% natural rubber adhesive Plant based dyes FSC approved packaging No harmful chemicals used in making this product Reduces your carbon footprint This product adheres to any clean, dry surface and removes residue free. It’s ‘write on’ absorbent surface is ideal for the TV, film and entertainment business. With this bundle, you will receive a Fluorescent Yellow, Fluorescent Pink, Fluorescent Green, and Fluorescent Orange mini tape. Each roll is 5m long.

Read more less

Premium-Grade, Eco-Conscious Matt Gaffer Tape for Professionals. Trusted by crews across film, TV, theatre, and live events, NRG Non-Reflective Gaffer Tape delivers outstanding performance. Designed for temporary fixes, labelling, floor marking, talent marks, and securing cables, this tape offers exceptional adhesion with easy, residue-free removal*. Made from 100% natural cotton cloth (120 mesh) and bonded with a 100% natural rubber adhesive, NRG Gaffer Tape is a sustainable choice that doesn’t compromise on performance. Its non-reflective matte finish and write-on surface make it a go-to essential for fast-paced production environments where gaffers tape performance and reliability is key. Key Features: ✅ Professional-grade matte finish – non-reflective and camera-ready ✅ High-performance natural adhesive – strong hold, clean removal* ✅ Residue-free on most clean surfaces* ✅ Smooth, controlled unwind – for consistent, stress-free use ✅ Hand-tearable – no scissors or knives needed ✅ Highly conformable – adheres to irregular or curved surfaces ✅ Abrasion-resistant – withstands wear in high-traffic areas ✅ Weather-resistant – ideal for short-term outdoor use Eco Credentials: ♻️ 100% natural cotton cloth 🌱 100% natural rubber adhesive 🌿 Plant-based inks and dyes 🚫 Free from harmful chemicals 🌍 Reduced carbon footprint 📦 Recyclable cardboard core Application Tips: For best results, apply only to clean, dry, smooth, and non-porous surfaces, and avoid prolonged exposure to UV or direct sunlight. Make sure surfaces are free from oil, dust, or moisture to ensure optimal adhesion. Storage: Store in a cool, dry place, away from sunlight and extreme temperatures. *Residue-free performance depends on surface type, conditions, and duration of application.

Read more less

for light stands or tripods that have a top screw of 1/4'' Convert from female 1/4'' to 3/8'' male Made of Brass 2cm in height

Read more less

The Windbubble PRO microphone windshields will give you the ultimate wind protection you can get for you omni-directional lavalier, field recording or headset mic. Whatever the make or size of your mic, the Windbubble PRO range of premium quality furry windshields keeps away those horrible wind noises and allows the clean and clear frequencies in. The Windbubble PRO lav mic windshield consists of a soft rubber mount. Unlike hard plastic mounts this special rubber mount absorbs shocks and stops vibrations transferring to your mic’s capsule. The rubber mount holds the furry windshield firmly in place on your mic, making sure it doesn't slip off. In addition to this, the rubber mount has a slight conical shape inside, which ensures you can't push your microphone too far into the windshield. This is very important to ensure that your microphone has a "bubble" of dead-air around the capsule for optimal wind protection and audio clarity. This means that your mic will consistently stay in the best possible position for maximum efficiency. There are four sizes of rubber mounts available to fit the most commonly used omnidirectional lavalier mics, headset mics, or field recording stereo-pair microphones, this includes The Windbubble Pro (Twin pack) Large. The fixed positioning of the mic using the rubber mount has given us the ability to engineer a smaller overall profile for the Windbubble PRO without compromising on the efficacy of the wind protection. However, each mount size is also available in a larger 'Extreme' version which consists of an inner foam core, surrounded by our much-loved multi-pile faux fur, to offer you an even greater level of wind protection for your microphone. These are especially helpful on those super windy exteriors and a perfect solution for factual, ENG and broadcast shoots. Every Windbubble PRO is available in our renowned multi-pile faux fur. This unique fur has been specially designed with varying lengths of fur to help gradually slow down the wind particles before reaching the mic. The base of the fur has a higher density of shorter hairs and an acoustically transparent backing material for maximum frequency transparency. So instead of the wind hammering on the microphone and making those horrible, “I’m in the middle of a hurricane,” sounds, the capsule is kept in a calm bubble of wind protection and allowed to perform at its best. Each Windbubble PRO is available in a single or twin-pack of lapel mic windshields and in four different colours (black, grey, white, and beige) to allow you to colour-match to the costume or outfit of the talent. Please note: The Windbubble PRO is only suitable for omnidirectional microphones. If you have a directional microphone, then the original Windbubble is the best microphone windshield for your mic. WINDBUBBLE PRO FEATURES: WORLD-RENOWNED PROTECTION FROM WINDBest in the industry wind protection thanks to the bubble-effect and rubber mount in the design. The construction of the Windbubble PRO holds a quiet space of dead-air around the mic capsule, allowing it to perform the best way possible and delivering detailed and naturally transparent audio to your transmitter or recorder. WINDBUBBLE PROS WON'T FALL OFFThe rubber mount firmly grips your mic, ensuring the windshield will stay in place and you don't have to worry about it falling off mid-shoot. CHOOSE YOUR SIZE AND MODELThe Windbubble PROs are available in four different sizes to fit the most popular lavalier, head-worn or field recording mics. Each size is also available in a standard version or and 'Extreme' version for greater wind protection.  NATURAL SOUNDThe fur and mesh construction makes The Windbubble PRO acoustically transparent to keep the sound very close to the microphone’s natural frequency response. CHOOSE YOUR COLOURAvailable in four different colours (black, grey, white and beige) oh high quality Bubblebee faux fur to make it easier to match a Windbubble PRO colour to most outfits. MULTI-PILE FURThe short, dense hair of the fur gives the Windbubble PRO a rounded and organic shape while the longer fur slows wind down gradually for best-in-class wind protection. The Bubblebee fur is less shiny than others, to better blend with skin, clothes and other surrounding materials. QUALITY YOU CAN TRUSTDesigned in Denmark by sound lovers, for sound lovers! It is important that you check the correct size(s) Windbubble PRO windshield suitable for your omnidirectional lavalier microphone. Please consult the size guide below to check this. XS - Built for omni microphones with a diameter of 3.0-5.0mmFor Example: Countryman B3, B6, E6, H6Deity W.Lav Micro, W.Lav ProDPA 6060, 6061, 6066Sanken COS-11 (without metal popshield)Sennheiser HSP 2, MKE 1, MKE 2Sony ECM-88, ECM-90 Small - Built for omni microphones with a diameter of 5.0-6.5mm:For Example: Deity W.LavDPA 4060, 4061, 4062, 4063, 4066, 4071, 4166, 4266Røde Lavalier, Lavalier Go, SmartLav+ LINKLavSennheiser ME 2 (old style with removable popshield 5.8mm ø from G2/G3 series)Shure Duraplex DL4, DH5, Twinplex TL45, TL46, TL47, TL48Sony ECM-77 Medium - Built for omni microphones with a diameter of 6.0-8.0mm:For Example: LOM mikroUši, mikroUši ProSennheiser ME 2-US (old style with removable popshield 6.5mm ø from G3/G4 series)Sony ECM-V1Tascam TM-10LTentacle MIC-01 ITEM CODES:BBI-WP-XS-BK/WH/GY/BEBBI-WP-S-BK/WH/GY/BEBBI-WP-M-BK/WH/GY/BE BBI-WP-XS-BK/WH/GY/BE-EBBI-WP-S-BK/WH/GY/BE-EBBI-WP-M-BK/WH/GY/BE-E BBI-WP2-XS-BK/WH/GY/BEBBI-WP2-S-BK/WH/GY/BEBBI-WP2-M-BK/WH/GY/BE BBI-WP2-XS-BK/WH/GY/BE-EBBI-WP2-S-BK/WH/GY/BE-EBBI-WP2-M-BK/WH/GY/BE-E

Read more less

Viviana Fur For Lavs are pre-cut, low-profile, soft high density fur covered designed to protect lavalier microphones, offering noise reduction and increased wind protection. The unique fur cover helps to preserve natural audio. This product is available in square, round, and rectangular shapes. The square and round shapes are compatible with any lavalier microphones available on the market. However, the rectangular shape offers the possibility to create very low-profile lavalier microphone wind jammers, making it perfect for use with DPA 6060, Countryman B6, Sennheiser MKE1, and other low-profile lavalier microphones available on the market.

Read more less

Standard Masking Tape  Perfect for painting and decorating 48mm x 50M length Easy-to-tear Use on a variety of surfaces and removes cleanly without leaving residue Great value for money with enough tape for multiple projects.

Read more less

Standard Masking Tape Perfect for painting and decorating 24mm x 50M length Easy-to-tear Use on a variety of surfaces and removes cleanly without leaving residue Great value for money with enough tape for multiple projects.

Read more less

The waterproof 1020 Micro Case is one of the smallest Peli cases, perfect for protecting small valuables. The Peli 1020 is watertight, crushproof and dustproof. It comes with a rubber-liner that provides protection whilst also doubling up as the o-ring seal. The case is available with or without pick 'n' pluck foam, and in black or yellow, with a clear or solid lid. The lid has an easy open latch for quick access and the case comes with a free carabiner for convenient attachment. Case Features Automatic pressure equalisation valve Carabiner Rubber liner Scratch resistant Dimentions: Int. Length (mm) 131  Int. Width (mm) 86  Int. Depth (mm) 41  Ext. Length (mm) 162  Ext. Width (mm) 121  Ext. Depth (mm) 54  Lid Length (mm) 131  Lid Width (mm) 86  Lid Depth (mm) 17  Protection: Crushproof, Dustproof, Waterproof Buoyancy Maximum (kg): 0.34  IP Rating: 67  Weight Empty (kg) 0.26  Weight (kg) 0.26  Weight with Foam (kg) 0.3

Read more less

The Bubblebee Microphone Accessory Case is a tough, protective microphone box with multiple compartments for accessories. Each compartment has a lid that keeps its contents safe and separated for easy access. The top of the Mic Accessory Case has the Bubblebee Logo imprinted with our slogan, "Making Sound Sound Better". Package contains two (2) Mic Accessory Cases. Pack contains 2 x strong ABS moulded cases Stainless steel reinforced hinge 5 Independant accessory compartments 1 large compartment for a lavalier microphone Transparent so you can see the contents "Making Sound Sound Better" printed on the front

Read more less

Features: Size - 3/16" with a 6" long T-Handle Made from a high torque steel to provide extra strength when removing troublesome rusty screws The black ProGuard finish has a special surface to prevent moisture Comes in the colour yellow

Read more less

The URSA MiniMounts are a slim, low-profile mount designed to be rigged where larger mounts cannot go. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. This MiniMount is deigned to fit the DPA 4060. MiniMounts are are available in four colours. Black, Brown, Beige, White. There are seven models available, They are designed specifically for the Deity W.Lav Pro, DPA 4060, 4071, 6060, 4660HD, RODE LAV/LAVii, Sanken COS11, Sennheiser MKE1 & MKE2, ME2, Shure Twinplex and Sony ECM-V1. More About URSA MiniMounts Easy to rig beside buttons on shirts where larger mounts will not fit! Their thin shape makes them perfect mounts for rigging on the skin in the cleavage or onto the bra. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. MiniMounts are moulded from hardened plastic. They won t snap under pressure or deform under heat. Each MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11 x 22mm and are designed specifically for MiniMounts. Our MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 11m wide x 22mm long x 6mm tall. Our 6060 & MKE1 measure 9.5m wide, 20mm long x 5mm tall. The DPA 4060 model also fits a CountryMan B3 with a Cap. The MKE1 model also fits a Countryman B6. The MKE1 & MKE2 models are designed to be used WITHOUT caps on the mics. This allows the mount to be as small as possible. Made for: DPA 406x Dimension: 22 x 11 x 6mm Notes: Works with Countryman B3

Read more less