Low profile, light weight and extremely durable. The Pro-Pocket 2.0 has a unique layout design which enables it to hold a professional’s must-have tools and necessities with minimal bulk. Increased durability with 1200 denier nylon polyester (previously 600). Wider phone pocket, 10cm(h) x 7.5cm(w) x 2cm(d) now fits most larger smart phones. 1 x Side mounted D-rings 1 x Detachable 26cm accessory loop Single-handed tool access Low profile, unobtrusive design Easy on/off belt flap (allowing independent removal from belt) Integrated accessory loop with snap hook included 1 x internal tool pocket: 10cm(h) x 3cm(w) x 2.5cm(d) 1 x open-bottomed tool pocket (2.5cm diameter) 1 x open-bottomed tool pocket (3cm diameter) 1 x open-bottomed tool pocket (2cm diameter) 1 x open-bottomed pen pocket 1 x side-mounted podger pocket (2cm diameter) Hook & loop closure flap Overall pouch size 20cm(h) x 14cm (w) x 4.5cm (d) – Main structure only (excludes snap hook and accessory loop) Tool bag contents not included. Measurements are approximate. Ensure tools remain securely held in place at all times. If using this item while working at height you should ensure tools are adequately secured and could not become a ‘falling object’ hazard.

Read more less

14 tools in one hand. So simple yet it’s indispensable. Cut from 4mm hardened steel it’s one of the toughest multi-tools of its kind on the market. 14 separate tools remain instantly available, with every one designed around some of the most common needs in the professional rigging industry. Finished in a durable matt black powder coat and if you were ever in doubt, it has got a bottle opener too. 3/8″, 1/2″, 3/4″ nut tools 7mm (M6) square nut tool 18mm (M10), 20mm (M12), 24mm (M14) nut tools 4mm and 6mm eyelets Wire Stripper (x2) Wingnut tool Barndoor tool Bottle opener

Read more less

Aluminium Form Holder A4 by Westcott With separating device, laterally-Opening, versatile and practically usable Inner page clip holder Retention tray with attachment strip E-17004 00 aka: Sheet Tin, Form Holder, Neg Report Holder.

Read more less

Foamclene is a non-flammable and anti-static multi-surface foam cleaner. A powerful formulation that lifts grease and dirt from general external surfaces to leave a fresh result. Spray directly onto surface and remove with an AF cleaning cloth for best results. Do not use on any type of screen including TFT, LCD, Smart TVs or screen filters. This product is not suitable for polished wood. Avoid electrical contactsKeypoints: Non flammable anti static pleasant fragrance

Read more less

Reduces a 3/8'' threaded screw to a standard 1/4'' Adapter from 3/8'' to 1/4'' screw Very small, and sturdy 2cm in height

Read more less

for light stands or tripods that have a top screw of 1/4'' Convert from female 1/4'' to 3/8'' male Made of Brass 2cm in height

Read more less

The Windbubble PRO microphone windshields will give you the ultimate wind protection you can get for you omni-directional lavalier, field recording or headset mic. Whatever the make or size of your mic, the Windbubble PRO range of premium quality furry windshields keeps away those horrible wind noises and allows the clean and clear frequencies in. The Windbubble PRO lav mic windshield consists of a soft rubber mount. Unlike hard plastic mounts this special rubber mount absorbs shocks and stops vibrations transferring to your mic’s capsule. The rubber mount holds the furry windshield firmly in place on your mic, making sure it doesn't slip off. In addition to this, the rubber mount has a slight conical shape inside, which ensures you can't push your microphone too far into the windshield. This is very important to ensure that your microphone has a "bubble" of dead-air around the capsule for optimal wind protection and audio clarity. This means that your mic will consistently stay in the best possible position for maximum efficiency. There are four sizes of rubber mounts available to fit the most commonly used omnidirectional lavalier mics, headset mics, or field recording stereo-pair microphones, this includes The Windbubble Pro (Twin pack) Large. The fixed positioning of the mic using the rubber mount has given us the ability to engineer a smaller overall profile for the Windbubble PRO without compromising on the efficacy of the wind protection. However, each mount size is also available in a larger 'Extreme' version which consists of an inner foam core, surrounded by our much-loved multi-pile faux fur, to offer you an even greater level of wind protection for your microphone. These are especially helpful on those super windy exteriors and a perfect solution for factual, ENG and broadcast shoots. Every Windbubble PRO is available in our renowned multi-pile faux fur. This unique fur has been specially designed with varying lengths of fur to help gradually slow down the wind particles before reaching the mic. The base of the fur has a higher density of shorter hairs and an acoustically transparent backing material for maximum frequency transparency. So instead of the wind hammering on the microphone and making those horrible, “I’m in the middle of a hurricane,” sounds, the capsule is kept in a calm bubble of wind protection and allowed to perform at its best. Each Windbubble PRO is available in a single or twin-pack of lapel mic windshields and in four different colours (black, grey, white, and beige) to allow you to colour-match to the costume or outfit of the talent. Please note: The Windbubble PRO is only suitable for omnidirectional microphones. If you have a directional microphone, then the original Windbubble is the best microphone windshield for your mic. WINDBUBBLE PRO FEATURES: WORLD-RENOWNED PROTECTION FROM WINDBest in the industry wind protection thanks to the bubble-effect and rubber mount in the design. The construction of the Windbubble PRO holds a quiet space of dead-air around the mic capsule, allowing it to perform the best way possible and delivering detailed and naturally transparent audio to your transmitter or recorder. WINDBUBBLE PROS WON'T FALL OFFThe rubber mount firmly grips your mic, ensuring the windshield will stay in place and you don't have to worry about it falling off mid-shoot. CHOOSE YOUR SIZE AND MODELThe Windbubble PROs are available in four different sizes to fit the most popular lavalier, head-worn or field recording mics. Each size is also available in a standard version or and 'Extreme' version for greater wind protection.  NATURAL SOUNDThe fur and mesh construction makes The Windbubble PRO acoustically transparent to keep the sound very close to the microphone’s natural frequency response. CHOOSE YOUR COLOURAvailable in four different colours (black, grey, white and beige) oh high quality Bubblebee faux fur to make it easier to match a Windbubble PRO colour to most outfits. MULTI-PILE FURThe short, dense hair of the fur gives the Windbubble PRO a rounded and organic shape while the longer fur slows wind down gradually for best-in-class wind protection. The Bubblebee fur is less shiny than others, to better blend with skin, clothes and other surrounding materials. QUALITY YOU CAN TRUSTDesigned in Denmark by sound lovers, for sound lovers! It is important that you check the correct size(s) Windbubble PRO windshield suitable for your omnidirectional lavalier microphone. Please consult the size guide below to check this. XS - Built for omni microphones with a diameter of 3.0-5.0mmFor Example: Countryman B3, B6, E6, H6Deity W.Lav Micro, W.Lav ProDPA 6060, 6061, 6066Sanken COS-11 (without metal popshield)Sennheiser HSP 2, MKE 1, MKE 2Sony ECM-88, ECM-90 Small - Built for omni microphones with a diameter of 5.0-6.5mm:For Example: Deity W.LavDPA 4060, 4061, 4062, 4063, 4066, 4071, 4166, 4266Røde Lavalier, Lavalier Go, SmartLav+ LINKLavSennheiser ME 2 (old style with removable popshield 5.8mm ø from G2/G3 series)Shure Duraplex DL4, DH5, Twinplex TL45, TL46, TL47, TL48Sony ECM-77 Medium - Built for omni microphones with a diameter of 6.0-8.0mm:For Example: LOM mikroUši, mikroUši ProSennheiser ME 2-US (old style with removable popshield 6.5mm ø from G3/G4 series)Sony ECM-V1Tascam TM-10LTentacle MIC-01 ITEM CODES:BBI-WP-XS-BK/WH/GY/BEBBI-WP-S-BK/WH/GY/BEBBI-WP-M-BK/WH/GY/BE BBI-WP-XS-BK/WH/GY/BE-EBBI-WP-S-BK/WH/GY/BE-EBBI-WP-M-BK/WH/GY/BE-E BBI-WP2-XS-BK/WH/GY/BEBBI-WP2-S-BK/WH/GY/BEBBI-WP2-M-BK/WH/GY/BE BBI-WP2-XS-BK/WH/GY/BE-EBBI-WP2-S-BK/WH/GY/BE-EBBI-WP2-M-BK/WH/GY/BE-E

Read more less

Precision Cleaning Solution (PLC) is formulated to the highest professional standards by Kinetronics Corporation. This Lens cleaning fluid is high performing, leaving a streak free finish. It is an alcohol based, fast drying, non-residue solvent which is filtered to remove any impurities and ensure the purest, spot-free lens cleaning solution available. Use PLC to clean optics including: Digital camera lenses. Camcorder lenses. Eyeglasses. Telescopes. Binoculars. Instruments. Coated glass. Most types of plastic.

Read more less

These Market Stall Clips are used for clamping and securing Tarpaulin or any sheet of your choice in place, These clips come in a size of 6 inches / 15cm and made from galvanised steel with a heavy duty coil spring which is strong and durable. Features 6 inches / 15cm long Made from Galvanised Steel 2 inch / 5cm grip opening Strong heavy duty coil spring Ribbed Handles for a better grip aka Swiss Clips

Read more less

URSA MiniMounts are a slim, low-profile mount designed to be rigged where larger mounts cannot go. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. This MiniMount is deigned to fit the Works with Sanken COS11 MiniMounts are are available in four colours. Black, Brown, Beige, White. There are seven models available, They are designed specifically for the Deity W.Lav Pro, DPA 4060, 4071, 6060, 4660HD, RODE LAV/LAVii, Sanken COS11, Sennheiser MKE1 & MKE2, ME2, Shure Twinplex and Sony ECM-V1. More About URSA MiniMounts Easy to rig beside buttons on shirts where larger mounts will not fit! Their thin shape makes them perfect mounts for rigging on the skin in the cleavage or onto the bra. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. MiniMounts are moulded from hardened plastic. They won't snap under pressure or deform under heat. Each MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11 x 22mm and are designed specifically for MiniMounts. MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 11m wide x 22mm long x 6mm tall. Our 6060 & MKE1 measure 9.5m wide, 20mm long x 5mm tall. The DPA 4060 model also fits a CountryMan B3 with a Cap. The MKE1 model also fits a Countryman B6. The MKE1 & MKE2 models are designed to be used WITHOUT caps on the mics. This allows the mount to be as small as possible. Made for: Sanken COS11 Dimension: 22 x 11 x 6mm Notes: Works with Deity W.Lav Pro

Read more less

Staedtler 112 Tradition Pencil Cedar Wood with Eraser HB Manufactured from farmed cedar wood, with a quality lead that ensures maximum point strength and slow wear. Features: Manufactured from farmed cedar wood, with a quality lead that ensures maximum point strength and slow wear

Read more less

Hands-on Heat Protection. World class DuPont Nomex lining encases your hands in a heat and flame resistant barricade throughout the glove. Rated to 250 C for up to 15 seconds, the Phoenix provides a skin-protecting barrier when working with high-temperature items. Specially selected double-layered leather additionally defends the palm and key wear areas against abrasions. A one-piece leather layer on the palm is enhanced with an articulated second layer to allow exceptional freedom of movement as you work. All combined with DuPont Kevlar double stitched seams to brace an incredibly durable glove. EN407: 2004 Clause 2 Contact Heat Performance Level 2 Rated to 250 C for up to 15 seconds Abrasion resistant, double layered leather palm Articulated second layer for exceptional freedom of movement (palm side) DuPont Kevlar double stitched seams Snug fit to minimise snagging Write-on ID Tag

Read more less

Double sided tape has pressure-sensitive adhesive exposed on both sides, allowing two parts to be bonded together by the tape between them with a wax paper separator.. 

Read more less

Can be used for tidying cables, cable retention and numerous other purposes Sold in bags of 100. Simple to install Size: 430 mm x 9.0 mm  Colour: Black

Read more less

Micro Windjammer Rycote has been making Windjammers for professional broadcasters and film-makers for over four decades and are recognised as the industry-standard for wind protection products. These days even the smallest compact cameras allow you to shoot great, high-quality video but if you've ever tried filming outdoors on even a mildly blustery day, you'll know that the wind can wreck your perfectly composed soundtrack in a matter of seconds!Our fantastic Micro Windjammer is easy to fit and provides all-in-one wind protection for your camera's built-in microphone helping you to capture great sounding audio, even outdoors. Designed to help prevent wind noise from destroying the audio recording from your HDSLR camera, camcorder or compact digital camera, the Rycote Micro Windjammer is also compatible with the IPhone, IPad and most other mobile phones. This invaluable piece of kit for all your outdoors recordings is handy, easy to fit and leaves no residue on removal.Made by Rycote in the UK. Each individual pack contains 30 Stickies and 6 reusable grey fur discs. Main Benefits: Micro Windjammer provides versatile wind protection for the built-in microphones on a range of devices Fits over the built-in microphone on DSLR cameras, camcorders and compact cameras Compatible with iPhone, iPad and most other mobile phones and tablets Greatly reduces wind noise, to help you to capture great audio, to go with your video An invaluable piece of kit for your outdoor recordings great for improving the sound quality of vlogs and YouTube videos Handy, easy to fit, easy to remove and leaves no residue Each individual pack contains 30 Stickies and 6 reusable grey fur discs

Read more less

THE INVISIBLE Lav COVERS FUR OUTDOOR THESE FUR PADS ELIMINATE RUSTLING AND WIND NOISES FROM YOUR Lav MIC The Invisible Lav Covers FUR OUTDOOR allow you to easily mount and hide your Lavalier microphones directly on the skin or on clothes.  Each package of Invisible Lav Covers FUR OUTDOOR consists of 9 pieces of fur fabric in 3 colors: Black, Beige and White together with 30 pieces of Bubblebee Industries’ high quality Invisible Lav Tape. FEATURES Designed to be Used Under Clothes Eliminate Rustling and Wind Noises Stick Directly to the Skin or Clothes Hypo Allergic / Allergy Tested 3 Black, 3 Beige and 3 White Reusable Fur Pads 30 Pieces of High Quality Tape Designed in Denmark by Sound Lovers, for Sound Lovers The transparent double-sided Invisible Lav Tape keeps your microphone and fur fabric solid in place on one side and sticks directly to the skin or to clothes on the other side allowing the microphone to be safely and securely mounted almost anywhere. It’s all about being creative: under the collar, next to a buttonhole, or under the clothes in the chest area. The tape also has a small piece cut out in the middle of the tape, which is to be saved and used for fixing. While the fur fabric can be used up to four times, the tape must be replaced after each use. Since the Invisible Lav Covers FUR OUTDOOR package comes with 30 pieces of tape, you will be able to do 30 mounts per pack.

Read more less

Fits: 1510 Mobility Case 1510 Protector Case Dimensions: Int. Length (mm) 494 Int. Width (mm) 268 Int. Depth (mm) 136

Read more less

The 0915 Memory Card Case can hold 12 SD cards, 6 mini SD cards and 6 micro SD cards. This case is made of tough Polycarbonate resin and has a shock absorbing foam insert liner to keep your memory cards safe. It also has a water resistant seal to help keep water out and is IPX4 rated. The 0915 is a compact case, designed to easily fit into bags or pockets. Case Features Automatic pressure equalisation valve Rubber ‘O-ring’ seal Scratch resistant Shock absorbing liner Dimentions Int. Length (mm) 122 Int. Width (mm) 57 Int. Depth (mm) 14 Ext. Length (mm) 141 Ext. Width (mm) 83 Ext. Depth (mm) 22 Device Fit: Micro SD Cards, Mini SD Cards, Standard SD Cards Protection: Crushproof IP Rating: 54

Read more less

These mini rolls come on a small core and are the perfect pocket size. This super high quality Matt Non Reflective Gaffer tape comes with 100% cotton cloth content (120 mesh) and 100% natural rubber adhesive, with zero release coating. This makes the product our most environmentally conscious gaffer tape to date. Most inks used are plant based and ethically sourced. 100% natural cotton cloth 100% natural rubber adhesive Plant based dyes FSC approved packaging No harmful chemicals used in making this product Reduces your carbon footprint This product adheres to any clean, dry surface and removes residue free. It’s ‘write on’ absorbent surface is ideal for the TV, film and entertainment business. With this bundle, you will receive a Grey, White and two Black rolls of mini tape. Each roll is 5m long.

Read more less

High matt moss paint that simulates moss. Water soluble to easily tone back effects for the perfect result. Click here for Usage Instructions

Read more less

MOUNTING A LavALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. Compatible with DPA 4060 lavalier microphone. Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape

Read more less

75 ohm in-line female-female cable adapter compatible with 12G-SDI. Featuring a Gold-plated beryllium-copper center contact for enhanced spring characteristics.

Read more less

URSA Circular MiniMounts are a low-profile mount designed to be rigged discretely and retaining maximum surface area grip. They are in addition to their ultra slim standard MiniMounts. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. Circular MiniMounts are currently available in two colours and at the moment only for DPA 6060 (also fits 6061). More models and colours coming out soon. More About URSA MiniMounts Their round shape makes them perfect mounts for rigging on the skin on the chest or onto the underside of the costume or undergarments. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. Circular MiniMounts are moulded from hardened plastic. They won’t snap under pressure or deform under heat. Each Circular MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11x 22mm and are designed specifically for MiniMounts and Circular MiniMounts. Our MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 15mm in diameter. The DPA 6060 model also fits a DPA 6061. Made for: DPA 606x Dimension: 20 x 9.5 x 5mm

Read more less