The Windkiller SE (Special Edition) uses Bubblebees finest imitation fur to effectively protect your DPA 4018G or 4018E mic against wind noise. The outer layer of The Windkiller SE for DPA 4018G features a high-density, soft, multi-pile fur to gradually slow the wind down before reaching your mic. Inside, The Windkiller SE uses a super soft and smooth, open material. This allows your mic to sound as transparent as possible, whilst protecting your recordings against harmful wind noises. The black elastic band and press stud keeps The Windkiller SE firmly attached to your mic, whilst seamlessly blending into the windshield to remain discreet. When fitted correctly, The Windkiller SE holds a bubble of dead air around the front of the mic capsule, allowing the microphone to function as naturally as possible and keeping wind interference at bay. FEATURES: Designed to fit the DPA 4018G and DPA 4018E low profile supercardioid microphones. Uses the much-loved, multi-pile fur for the ultimate protection against wind noise. Transparent inner fabric maintains a very natural frequency response, on or off-axis. Manufactured in Denmark with quality and comfort in mind by sound lovers, for sound lovers. WHAT’S INCLUDED: 1 x The Windkiller SE for DPA 4018G  

Read more less

The Windkiller SE (Special Edition) uses Bubblebees finest imitation fur to effectively protect your DPA 4097 or 4099 mic against wind noise. On the outside, The Windkiller SE for DPA 4097 features a high-density, soft, multi-pile fur to gradually slow the wind down before reaching your mic. Inside, The Windkiller SE uses a soft and smooth, open material. This allows your mic to sound as transparent as possible, whilst protecting your recordings against harmful wind noises. The black elastic tab and press stud keeps The Windkiller SE firmly attached to your microphone, whilst seamlessly blending into the windshield to remain discreet. When fitted correctly, The Windkiller SE holds a bubble of dead air around the front of the mic capsule, allowing the microphone to function as naturally as possible and keeping wind interference at bay. FEATURES: Designed to fit the DPA 4097 Micro Shotgun and DPA 4099 Instrument microphones. Uses the much-loved, multi-pile fur for the ultimate protection against wind noise. Transparent inner fabric maintains a very natural frequency response, on or off-axis. Manufactured in Denmark with quality and comfort in mind by sound lovers, for sound lovers.

Read more less

MAKE WIND NOISE A THING OF THE PAST FOR YOUR DPA 4098 GOOSENECK MIC WITH THE WINDKILLER SEThe Windkiller SE (Special Edition) for DPA 4098 is the perfect match for your DPA 4098 supercardioid gooseneck microphone, providing exceptional wind noise reduction while maintaining the natural response of the microphone’s capsule. With The Windkiller SE for DPA 4098, you can capture crystal-clear audio, free from the worry of wind noise interfering with your sound. This slip-on windshield features an inner foam core surrounded by our industry-leading multi-pile faux fur, designed to offer outstanding wind protection. The durable rubber mount not only ensures a secure fit but also helps absorb unwanted vibrations. Whether you are recording sound for a speech, conference, live performance, church or house of worship, The Windkiller SE for DPA 4098 is the perfect accessory to upgrade your DPA 4098 Podium Microphone and experience flawless sound quality in any environment. Features: PERFECT FITSpecifically designed for the DPA 4098, this Windkiller SE fits snugly over the microphone while the durable rubber mount holds it securely in place. It’s designed to strategically protect the microphone capsule from unwanted wind noise which protecting the sensitive parts of the microphones pick up pattern. MULTI-PILE FUROur signature multi-pile faux fur effectively diffuses wind noise by slowing it down gradually, while maintaining the natural tonal qualities of your podium microphone. DESIGNED WITH DETAILThe Windkiller SE has been designed with a sleek, discreet profile that allows the audience to focus on the audio. Available in both black and white, it seamlessly with your microphone.

Read more less

The Windkiller SE (Special Edition) combines Bubblebees finest quality fur, design and manufacturing standards to effectively protect your portable recorder mic(s) against wind noise. On the outside, The Windkiller SE features a high-density, soft, multi-pile fur to gradually slow the wind down before reaching your mic. Inside, The Windkiller SE uses a soft and smooth, open material, allowing the mic to sound as transparent as possible, while protecting your recordings against harmful wind noises. The Windkiller SE can be affixed to the base of your portable recorders mic capsule(s) using an elasticated drawstring, while the leather band securely grips your portable/handheld recorder to keep the windshield in place and prevent wind from entering through the base. The Windkiller SE has been designed with an elasticated drawstring, encased in a soft leather band to securely grip your portable recorder to keep the windshield firmly in place and prevent wind from entering through the base. The base of The Windkiller SE should sit at the top of your recorder, allowing clear visibility of your recorders LCD display and accessibility to any controls or buttons on the side of your portable recorder. FEATURES Available in three sizes to fit the most widely available portable recorders on the market. Uses the much-loved, multi-pile fur for the ultimate protection against wind noise. Transparent inner fabric maintains a very natural frequency response. Includes an aerated mesh carry case. Manufactured in Denmark with quality and comfort in mind by sound lovers, for sound lovers. HOW TO FIT: Loosen the drawstring all the way and pull The Windkiller SE over the top part of the body of your portable recorder. Then tighten the drawstring to ensure the leather band is seated snugly around the body, below the built-in microphone diaphragm(s). When fitted correctly, The Windkiller SE holds a bubble of dead air around the mic capsule, allowing the microphone to function as naturally as possible and minimising wind interference in your recordings. SIZE GUIDE: XS - ∅ 32mm - 46mm (BBI-WKSE-PR-XS) M - ∅ 52mm - 65mm (BBI-WKSE-PR-M) L - ∅ 55mm - 71mm (BBI-WKSE-PR-L) Compatibility Chart

Read more less

TAKE YOUR FIELD RECORDINGS TO THE NEXT LEVEL WITH THE WINDKILLER SE FOR PORTABLE RECORDERSThe Windkiller SE (Special Edition) wind protection for portable recorders combines Bubblebee Industrie's finest quality fur, design and manufacturing standards to effectively protect your field recordings against wind noise. On the outside, The Windkiller SE windshield features high-density, soft, multi-pile fur to gradually slow the wind down before reaching your mic. Inside, The Windkiller SE windshield uses a soft and smooth, open material, allowing the mic to sound as transparent as possible, while protecting your recordings against harmful wind noises. This is the ideal windshield for improving wind protection on field recorders like the Sony PCM-D100 and similar, Zoom H4n and H1, H2, including the new Zoom Essential range, Tascam DR-100, Olympus field recorders and many more! See the full compatibility list Size Guide here. The Windkiller SE can be affixed to the base of your portable recorders mic capsule(s) using an elasticated drawstring, while the leather band securely grips your portable/handheld recorder to keep the windshield in place and prevent wind from entering through the base, providing enhanced wind protection. The Windkiller SE has been designed with an elasticated drawstring, encased in a soft leather band to securely grip your portable recorder to keep the windshield firmly in place and prevent wind from entering through the base. The base of The Windkiller SE should sit at the top of your recorder, allowing clear visibility of your recorders LCD display and accessibility to any controls or buttons on the side of your portable recorder. FEATURES: Available in four sizes to fit the most widely available portable recorders on the market. Uses their much-loved, multi-pile fur for the ultimate protection against wind noise. Transparent inner fabric maintains a very natural frequency response. Includes an aerated mesh carry case. Manufactured in Denmark with quality and comfort in mind by sound lovers, for sound lovers. HOW TO FIT THE WKSE WINDSHIELD Loosen the drawstring all the way and pull The Windkiller SE over the top part of the body of your portable recorder. Tighten the drawstring to ensure the leather band is seated snugly around the body, below the built-in microphone diaphragm(s). When fitted correctly, The Windkiller SE holds a bubble of dead air around the mic capsule, allowing the microphone to function as naturally as possible and minimising wind interference in your recordings. PORTABLE RECORDER WKSE SIZE GUIDE XS - ∅ 32mm - 46mm (BBI-WKSE-PR-XS) S - ∅ 36mm - 65mm (BBI-WKSE-PR-S) M - ∅ 52mm - 65mm (BBI-WKSE-PR-M) L - ∅ 55mm - 71mm (BBI-WKSE-PR-L) <iframe width="560" height="315" src="https://www.youtube.com/embed/qzqKdetZInE?si=rQWLDKje8oywpW9d" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>

Read more less

NEVER CHANGE A WINNING TEAM... Each package contains of 3 black, 2, white, 2 grey, 1 brown, 1 off-white and 1 beige Windbubble The Windbubbles are build to stay safe and secure on the microphone, and therefore comes in four different sizes. The frequency through the Windbubble is very close to the microphones natural sound. The wind reduction is the best in the industry, thanks to the bubble-effect in the design The short hair of the fur gives the Windbubble a more rounded and organic shape. The fur is less shiny to blend better with skin, clothes and other surroundings. Available in six different colours make is easier to find a Windbubble for every occasion. Designed in Denmark by sound lovers, for sound lovers. The Bubblebee Windbubbles consist of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing.  And this nothing is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside.  So instead of the wind hammering on the microphone and making those horrible “I’m in the middle of a hurricane”- sounds, it passes right through. The Windbubbles are specially constructed to be mounted quickly and easily on the specified types of microphone and to not fall off during use.  The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphones. It is important that you check the correct size(s) suitable for your lavalier microphone. Please consult our Size Guide to check this. Size 1 - Built for microphones with a diameter of 3,0-4,0 mmElastic opening circumference: 28 mm (1.10”)For Example:Sanken COS-11 (without metal windscreen)Countryman B6, B2D, E6Sennheiser MKE 1Sony ECM-90DPA 6060 Size 2 - Built for microphones with a diameter of 5,0-8,0 mm:Elastic opening circumference: 35 mm (1.38”)For Example:Sanken COS-11 (without metal windscreen)Countryman B3DPA 4060Sennheiser MKE 2, ME2, ME2-US (without windscreen), ME2-IILOM Mikro Uši Size 3 - Built for microphones with a diameter of 5,0-9,0 mm:Elastic opening circumference: 40 mm (1.57”)For Example:Sanken COS-11 (with metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II Size 4 - Built for microphones with a diameter of 8,0-13,0 mm:Elastic opening circumference: 42 mm (1.65”)For Example:Sanken COS-11 (with large metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)LOM Uši Pro

Read more less

A WINDBUBBLE DREAM TEAM FOR YOUR CONVENIENCE...   Each package contains 1 black, 1 grey, 1 brown and 1 white Windbubble. The Windbubbles are build to stay safe and secure on the microphone, and therefore comes in four different sizes. The frequency through the Windbubble is very close to the microphones natural sound. The wind reduction is the best in the industry, thanks to the bubble-effect in the design. The fur is less shiny to blend better with skin, clothes and other surroundings. Designed in Denmark by sound lovers, for sound lovers. The Bubblebee Windbubbles consist of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing.  And this nothing is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside.  So instead of the wind hammering on the microphone and making those horrible "I’m in the middle of a hurricane"- sounds, it passes right through. The Windbubbles are specially constructed to be mounted quickly and easily on the specified types of microphone and to not fall off during use.  The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphones. CHOOSE THE CORRECT SIZE It is important that you check the correct size(s) suitable for your lavalier microphone. Please consult our Size Guide to check this. Size 1 - Built for microphones with a diameter of 3,0-4,0 mmElastic opening circumference: 28 mm (1.10”)For Example:Sanken COS-11 (without metal windscreen)Countryman B6, B2D, E6Sennheiser MKE 1Sony ECM-90DPA 6060 Size 2 - Built for microphones with a diameter of 5,0-8,0 mm:Elastic opening circumference: 35 mm (1.38”)For Example:Sanken COS-11 (without metal windscreen)Countryman B3DPA 4060Sennheiser MKE 2, ME2, ME2-US (without windscreen), ME2-IILOM Mikro Uši Size 3 - Built for microphones with a diameter of 5,0-9,0 mm:Elastic opening circumference: 40 mm (1.57”)For Example:Sanken COS-11 (with metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II Size 4 - Built for microphones with a diameter of 8,0-13,0 mm:Elastic opening circumference: 42 mm (1.65”)For Example:Sanken COS-11 (with large metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)LOM Uši Pro

Read more less