The Scan Breathable Microfoam Nitrile Gloves are manufactured from a knitted grey spandex liner with a microfoam nitrile palm coating. These gloves are suitable for use in many processes involving the handling of small metal or plastic parts, or any situation where high dexterity is required. Extremely light and breathable, the special microfoam coating offers a secure grip in both wet and dry applications, with no sticky side effect and is oil and grease resistant. Lightweight, high dexterity construction 15g nylon / spandex liner Oil and grease resistant Highly breathable Conforms to EN420 and EN388

Read more less

These sausage markers are perfect for talent marks and camera positions in locations where tape marks cannot be used. Open ground, tarmac, gravel etc  Are they have a bulge to them they can be felt by talent underfoot.  With them being made of a water resistant material, if they do get wet and muddy, they are easily cleaned and will not rust. PVC Sausage Marker 12 inches This listing is for a single sausage marker only based on your colour selection.

Read more less

Undercovers are the perfect solution to completely hide lavalier microphones. Used with the included Stickies, these soft, fabric discs are designed to minimize the sound of clothing movement while providing protection from light wind. Available in: Black, Grey, White or Mix Available quantities: 30 Undercovers and 30 Stickies 100 Undercovers and 100 Stickies (not in Mix)

Read more less

Stickies Advanced are double-sided, hypoallergenic, adhesive pads used to affix lavalier microphones directly onto skin or on top of clothing. The soft fabric sandwiched between the two adhesive pads prevents the adhered mic from creaking due to skin or clothing movement. Stickies Advanced are designed to remain secure when attached to a dry surface and are intended to be discarded after use. Stickier hypoallergenic adhesive on both sides Supplied loose with easy peel-o tabs to make use easier Round Larger diameter means perfect for use with the ever-popular DPA Concealers O s allow wind protection on DPA Concealers, or folded-over with Overcovers Squared perfect for use with Sanken RM-11 (the rubber mount produced for the ubiquitous Sanken COS-11 mic) & for general cable management on radio mics Available in Packs of 25 & Bags of 100.

Read more less

Stickies are double-sided, hypoallergenic, adhesive pads used to affix lavalier microphones directly onto skin or on top of clothing. The soft fabric sandwiched between the two adhesive pads prevents the adhered mic from creaking due to skin or clothing movement. Included with Overcovers and Undercovers, Stickies are designed to remain secure when attached to a dry surface and are intended to be discarded after use. The materials used are hypoallergenic. Available in: Pack of 30 Stickies, Original Pack of 100 Stickies, Original Roll of 500 Stickies, Original

Read more less

Tie-pin, or Lavalier microphones as they are widely known, are ideal for discreet use in broadcast interview situations, their compact dimensions ensuring that they do not draw the eye on camera. Their convenient size means that they are even used by some radio broadcast engineers, despite their appearance not being an issue in that medium.In studio environments, Lavalier microphones are commonly used without foam wind covers, but when recording interviews outdoors, Lavaliers are just as prone to the deleterious effects of the wind as any other microphone, and a windshield is required to prevent the wind rendering the interview audio unlistenable.Rycote have manufactured a popular Lavalier Windjammer for many years, and are continuing to do so, but in recognition of the fact that most broadcasters today prefer their microphones to remain as unobtrusive as possible, a re-engineered version of that Windjammer has now been added to Rycote’s product line which is more discreet on camera.The fur on the Ristretto, as it is known, is considerably shorter than that on Rycote's existing Lavalier Windjammer. Like the existing Rycote Lavalier Windjammer, the Ristretto is secured to its microphone by a foam connector, but a rubber ring has now been added to both products for better grip and retention Main Benefits: High-level protection against wind noise for lavalier mics in the open air. Reduces lavalier microphone noise and clothes rustle. Rycote Codes Black Single: 065555 Grey Single: 065556 White Single: 065557 Black Pair: 065552 Grey Pair: 065553 White Pair: 065554

Read more less

Overcovers utilise Rycote exclusive fur technology, providing excellent wind-noise protection for lavalier microphones. They consist of a discreet, fur covering and are supplied with Stickies. With a Stickie affixed to clothing or skin, a fur disc is affixed over the top of a lavalier microphone Features Large size (26mm) ideal for DPA Concealers; Supplied with Stickies Adv Round, at 23mm also bigger than Originals ; Introducing new beige colour to cater for even more applications; Available in Black, Grey, Beige & White; Available in Packs of 5 Overcovers (with 25 x Stickies, Round) & Bags of 100 (Overcovers only).

Read more less

Overcovers use Rycote exclusive fur technology, providing excellent wind-noise protection for lavalier microphones. They consist of discreet, fur Windjammer and Stickies. With a Stickie affixed to clothing or skin, a fur Windjammer disc is affixed over the top of a lavalier microphone. Overcover packs contain 30 Stickies and 6 re-usable fur discs. Availble in Black, Grey, White or Mixed. Mixed contains 2 of each colour: white, grey & black.

Read more less

Designed for use with Lavalier microphones worn on the outside of clothing, the Lavalier Windjammer (or Furry) is the most heavy-duty of Rycote's subminiature Lavalier microphone products. It is suitable for use in windy outdoor interview conditions and greatly reduces microphone noise and clothes rustle, while also providing effective wind protection. Features: High-level protection against wind noise for lavalier mics in the open air Reduces lavalier microphone noise and clothes rustle The Lavalier Windjammer comes in a range of black, grey, and white as standard. Other colours are also available on request to allow you to select the right match for your chosen piece of clothing. Rycote Codes: Black Single: 065514 Grey Single: 065515 White Single: 065516 Black Pair: 065501 Grey Pair: 065502 White Pair: 065503

Read more less

Suitable for Lavalier mics of 4.5 mm in diameter and up to 15 mm length. The Lavalier Foam is a discreet, slip-on foam windshield, designed to protect personal microphones against light wind and pop noise.Made of durable, high quality open-cell acoustic foam, Lavalier Foam windshields offer up to 20dB of pop and wind noise attenuation, whilst avoiding concurrent high frequency loss. Engineered exclusively for Rycote, this high quality foam also provides excellent resistance against the damaging effects of moisture and UV light. An effective, low profile windshield solution for personal microphones, the Lavalier Foam is available in a range of Black, Beige and Brown colours.Additionally, you can now also benefit from a further 12dB of wind noise attenuation with Rycote's Lavalier Windjammer (Furry). Specifically designed for windier conditions, the Lavalier Windjammer fits on top of the Lavalier Foam and comes in a range of black, grey, and white as standard. These are sold seperatly. Other colours are also available on request to allow you to select the right match for your chosen piece of clothing. Main Benefits: Up to 20 dB wind and pop noise attenuation with minimal high-frequency loss from this slip-on foam windshield. Excellent resistance to moisture and UV light from the durable, high quality open-cell acoustic foam. Available in Black, Beige and Brown for a low profile windshield solution. Pack contains 5 Foams. Rycote Code: 105501

Read more less

Useful for holding tarps, poly etc in place. Robust steel construction with a powerful spring mechanism and soft jaw pads to protect the gripped surfaces. Heavy gauge metal frame, extra thick and durable PVC/rubber tip and grip. aka, Pony Clip, Pony clamp.

Read more less

RoboCup Holster is our version of a "Mini Front Box" and is another exciting add-on accessory for the RoboCup that securely holds your pens, keys, wallet, phones, tools and much more. In the storage area, there's a charging port slot which has been carefully designed and also a tiny drain hole. The 6 tool slots are reinforced for durability and sized for carabiners, scissors, hex keys, pliers and screwdrivers. For convenient viewing, a smartphone or tablet can be leaned against the Holster. Attach using the provided two straps and tighten snugly to secure. Remove all existing straps from the RoboCup before attaching the Holster. The position of the Holster can be swivelled around the RoboCup for ideal placement. The Holster can also be placed on a desk or strapped onto most tubes. For a more permanent attachment (not provided), use a stainless steel hose clamp for the top strap but be sure to not over-tighten and use a plastic cable-tie for the bottom strap. Built with a robust thick wall design with UV-stabilizers added for longevity. Backed by a “no-hassle” 3-year warranty. *Robocup sold separately.

Read more less

Releasable and Reusable cable ties. Can be used for tidying cables, cable retention and numerous other purposes Sold in bags of 100. Releasable Locking Simple to install and release Sold in three lengths: Small - 150mm Medium - 200mm Large - 300mm

Read more less

A high-quality flame retardant PVC electrical tape is available in a full range of colours. 19mm Wide 33m length On a 1 core. Performance Data Type of Film - PVC Thickness - 0.13mm Tensile Strength (Kg/cm) -2.5 Elongation at Break (Kg/cm) - 200 Adhesion (Kg/cm) - 18 Dielectric Breakdown (Volts) - 6,500 Dielectric Strength (Volts/mil) - 1,250 Also known as insulating tape, LX tape

Read more less

Pro Gaff is a matte cloth tape with a rubber based adhesive system. Available in a range of colours. Strong tape but easy to tear. 2" in size (in metric that's 48mm roughly) 50 yards long. (yes they measure in yards) These tapes are used for such things as: Labelling boxes Using different colours to differentiate between units Making actor marks Anything that needs to be highlighted with a brighter coloured tape Also can be used for: Temporary holding of light fixtures, wire and cable hold down, marking and labelling equipment cases. High visibility colours for marking of stairs, exits or sets. Dance floor splicing and bundling of cables. Benefits: High strength, high-performance adhesive system. Highly conformable to irregular surfaces. Weather resistant. High thread count. Abrasion resistant. Hand Tearable. Smooth, controlled unwind. Features: Printable, Quick Stick, Good Adhesion, Good Tensile Strength, Clean Removal, Outdoor Use, Highly Conformable, Hand Tearable, Easy Unwind, Good Abrasion Resistance, Weather Resistant *We cannot guarantee the colour you see on your screen is that of what the tape looks like. Its difficult to accurately display the true colours of these tapes on a monitor.

Read more less

Duracell Procell Constant 9V PP3 6LR61 PC1604 batteries are specifically designed to meet the demands of modern industrial and manufacturing environments. Each battery is crafted for devices requiring a consistent 9V power supply, ensuring operational continuity and reliability. The Procell Constant line stands out for its ability to deliver steady performance over extended periods, which is important in critical settings. These batteries are engineered for a long shelf life, which translates to less frequent replacements and better inventory control for businesses. Dependable Power: Reliable energy delivery for devices essential to business operations. Enhanced Longevity: Specially designed for a longer service life in industrial applications. Stable Operation: Maintains consistent output, even in varying environmental conditions. Professional Grade: Trusted by professionals for high-demand equipment and safety devices. The Duracell Procell Constant 9V PP3 6LR61 PC1604 batteries are each built to provide a high-quality power source for demanding applications. These batteries boast a specialized construction that ensures a stable 9V output, which is crucial for devices that require a consistent and uninterrupted power supply. They are particularly suited for professional use, Duracell Procell Constant 9V batteries are ideal for hospitals, schools, TV & Film production, sound and vision, safety & security companies. The Procell Constant series emphasizes durability and performance, which is reflected in the robust design of the 6LR61 PC1604 model. With a focus on providing sustainable performance, these Procell 9V batteries support the continuous operation of essential equipment, thereby contributing to the safety and efficiency of industrial environments. Their bulk packaging is convenient for facilities management, ensuring that a sufficient supply of high-quality batteries is always on hand.

Read more less

These Poly bags can be used to cover all sorts of kit. Commonly fashioned into custom camera covers or monitor covers. Transparent Polythene 500 gauge thickness makes them very durable and less likely to develop a hole. Available in two sizes 60cm x 60cm (2'x2') or 120cm x 120cm (4'x4'). *Please allow a small tolerance in the sizes due to manufacturing. aka: Polys, 2x2, 4x4, Cover, Rain Cover

Read more less

DON'T UNDERESTIMATE AN OBVIOUS NAME... The Piece-A-Fur is probably one of the most important additions to your sound recording bag. The high-quality imitation fur is thick, soft and durable, made for sound with a porous back material to allow sound frequencies through and dense, soft fur to deaden friction and reduce wind noise. This combination of an open base material and dense, high-quality fur sets the Piece-A-Fur apart as a top-quality versatile material that can help improve your mounts and recordings greatly, helping you eliminate wind and friction noise to a high degree. PIECE-A-FUR FEATURES Cut the Piece-A-Fur into pieces as desired to make your own wind protection. Eliminate clothing/costume noise caused by friction by cutting and placing under or between the layers of fabric. Reduces friction noise remarkably when rubbed against clothing, hairy chests, skin etc. The base/backing material of the fur is specially selected to allow for better frequency transparency when used to protect the microphone capsule. The fur is specially selected for its high density to deaden friction/rubbing noise The Piece-A-Fur is less shiny or reflective than many other fur types to blend in better with skin, clothing or other surroundings. Soft, durable, comfortable and easy to work with. Can also be stitched into costumes to reduce noise caused by movement in tight areas of fabric. A wide range of colours to help the Piece-A-Fur blend in almost any situation. Designed in Denmark by sound lovers, for sound lovers. The Piece-A-Fur gives you the opportunity to play with a piece of the specially produced wind protection faux-fur yourself. It's lush. You simply cut out the Piece-a-Fur in the desired size and shape and use it when mounting a microphone. This might come in handy if you work with uneven or problematic surfaces like a hairy chest that creates friction noise when recording. The Piece-a-Fur comes in the following six colours:Grey, Black, Brown, White, Off-White and Beige and will partner up perfectly with their Invisible Lav Tape. WHAT YOU GET: A soft, durable piece of faux-fur in either black, brown, grey, beige, off-white or white Measurements:36 cm x 10 cm (14.1” x 4”). Weight: 15g (incl. packaging) Item code: BBI-PAF-BK/BR/BE/OW/WH/GY

Read more less

Hands-on Heat Protection. World class DuPont Nomex lining encases your hands in a heat and flame resistant barricade throughout the glove. Rated to 250 C for up to 15 seconds, the Phoenix provides a skin-protecting barrier when working with high-temperature items. Specially selected double-layered leather additionally defends the palm and key wear areas against abrasions. A one-piece leather layer on the palm is enhanced with an articulated second layer to allow exceptional freedom of movement as you work. All combined with DuPont Kevlar double stitched seams to brace an incredibly durable glove. EN407: 2004 Clause 2 Contact Heat Performance Level 2 Rated to 250 C for up to 15 seconds Abrasion resistant, double layered leather palm Articulated second layer for exceptional freedom of movement (palm side) DuPont Kevlar double stitched seams Snug fit to minimise snagging Write-on ID Tag

Read more less

Features Robust chisel tip permanent marker for almost any surface Bonded fibre tip will retain its shape Permanent and waterproof ink will mark on metal, wood, glass, card or plastic Strong aluminium barrel Line width: up to 6.0mm

Read more less

Features: Robust bullet tip permanent marker for almost any surface Bonded fibre tip will retain its shape Permanent and waterproof ink will mark on metal, wood, glass, card or plastic Strong aluminium barrel Line width: 1.5-2mm

Read more less