Cut your own applications from these 30 x 15cm Furry Rectangles of Super Soft 13mm length. The rear side of the fur is also very smooth and creates very little noise FurTangles provide wind protection and can help reduce clothing noise if applied between layers. More About URSA Fur Tangles Cut the furry rectangle into any shape you require then apply double-sided sticky tape to the back. Apply around microphone rigs to reduce the scratchy sound of hairy chests scratching against fabric. Simply stick a cutting of Available in Black, White & Brown.

Read more less

Fur Circles are designed to be used under clothing to reduce wind noise and clothing rustle. Fur Circles are cut using a unique drilling method which only cuts the base and allows allows the fur to be of an equal length around the edge of the circle. Fur Circles can be compressed under tight costumes and leave less of a lump than other furs. Each pack comes with 30 URSA Sticky Circles which are hypoallergenic. More About URSA Fur Circles Multipacks contain 3x White, 3x Black, 3x Brown & 30 Stickies. Fur Circles are reusable up to 4 or 5 times. Can be stuck directly to skin or clothes. Single Colour Packs contain 9 of one colour & 30 Stickies. Available colours : Black, White & Brown. 25mm diameter, re-useable & super soft. Low profile lav cover creates less of a lump under costumes.

Read more less

SOFT FOAM MOUNTS WITH FLAT SIDES URSA Foamies! Soft foam mounts for your COS11s, DPAs, Sennheisers & B3s. Designed with flat sides so they can be stuck directly to skin or costume. The foam provides a soft, quiet buffer to reduce clothing noise. Made from the highest quality sponge. Available in Packs of 12 in Black, Brown, Beige or White. Features URSA Foamies are compatible with microphones which measure 3-5mm diameter. These mics include: COS11s, DPA 4060, 4071, MKE2 & The Countryman B3. Can be rigged on to aerial tips to help reduce RF loss. URSA Foamies measure 24mm length, 17mm width and 9mm tall with a 2.5mm diameter hole that stretches up to 6mm. (URSA Mini Foamies measure 22mm length, 14mm width and 7mm tall with a 1.5mm diameter hole that stretches up to 4mm)

Read more less

URSA Circular MiniMounts are a low-profile mount designed to be rigged discretely and retaining maximum surface area grip. They are in addition to their ultra slim standard MiniMounts. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. Circular MiniMounts are currently available in two colours and at the moment only for DPA 6060 (also fits 6061). More models and colours coming out soon. More About URSA MiniMounts Their round shape makes them perfect mounts for rigging on the skin on the chest or onto the underside of the costume or undergarments. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. Circular MiniMounts are moulded from hardened plastic. They won’t snap under pressure or deform under heat. Each Circular MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11x 22mm and are designed specifically for MiniMounts and Circular MiniMounts. Our MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 15mm in diameter. The DPA 6060 model also fits a DPA 6061. Made for: DPA 606x Dimension: 20 x 9.5 x 5mm

Read more less

MIC STRAP WITH UNIQUE GRIPPER. URSA Chest Straps allow you to rig microphones onto sweaty or hairy chests which would otherwise not take sticky tape.Reduces noise from hairy chests and allows you to rig on hot, sweaty bodies. Unique Gripper strips keeps the strap from slipping. Mic Pouch comes with 3 sections to fit all microphone sizes & mounts. Ultra-Thin fabric becomes invisible even under tight T-Shirts. Unique Cable Keeper stops the mic from pulling out of the pouch. One Size fits all strap. Available in Beige, Black, Brown Caramel and White More About URSA Chest Straps The Mic pouch on our Chest Straps have 3 compartments, the central pouch fits an URSA Foamie, MiniMount, RM11, DPA Concealer. The thinnest pouch fits a COS11 and the third pouch fits a larger DPA size microphone without a mount. Our unique polyurethane gripper is bonded to either side of the pouch to keep the strap from slipping down the chest. We utilise a Cable Keeper which keeps your cable firmly in place without needing to tape it to the strap. Available in Beige, Espresso, Black and now White. The Chest Strap comes in one size measuring 110cm long which can be rigged on Chests up to 45 inches across. URSA Straps use certified OEKO-TEX hypoallergenic fabric and gripper.

Read more less

The URSA Calf Strap measures 47cm. Has Gripper to keep it from slipping around the Calf & Ankle. URSA Straps are 1mm thick, comfortable, low-profile straps. Using New Fabric Technology to create a unique bonded fabric which hook Velcro can grip to at any point. Calf Straps are available in: 3 Colours : Caramel, Beige or Black Big Pouch to suit all units. More About URSA Calf Straps Unique oval of Gripper is fitted inside the Pouch to keep the transmitter in place. Big Pouches measure 10cm tall x 8cm wide Strap measures: 47 x 10 cm Integrated cable pocket allow the mic cable to be looped and secured on the strap without the need for sticky tape. Colour Coded labels allow quick identification of strap size. URSA Straps are Machine Washable at 40 degrees Hang dry or Tumble dry at a low temperature. All their straps are manufactured by hand in the United Kingdom. URSA Straps use certified OEKO-TEX hypoallergenic fabric and gripper.

Read more less

URSA Transmitter Pouch for Belts or Bras (Pouch Only) URSA Pouches are low-profile soft pouches that allow you to rig a transmitter vertically or horizontally to URSA Belts, standard belts or bras. They can also be sewn or pinned into costumes. They can also be rigged on the inside of helmets, used as IEM pouches or just as soft protection if placing transmitters in the pocket. Available in Four Sizes & Two Colours Black & Beige New Fabric Technology In order to make the most comfortable low-profile straps we developed a brand new bonded fabric. URSA Straps are just 1mm thick. They provide excellent stretch, comfort & breathability with an outer surface that hook Velcro can grip to at any point. Product Specifications Pouch Size Transmitter Compatibility Size Mini Lectrosonics SSM Zaxcom ZMT3 only Sound Devices A20 Mini Tx 86x52mm Small Lectrosonics SMV, PDR Q5X PlayerMic S 86x55mm Medium Lectrosonics SMQV & LT Wisycom MTP 40 & 41 Sennheiser SK5212 Zaxcom TRX & ZFR 200 & 300 Shure ADX 1M 86x75mm Large Lectrosonics LMb, UM400a, DCHT Audio Ltd A10, 2040 Sennheiser G3, 2000s Sony UWP-D11 Saramonic UWMIC9 TX9 (also fits SMQV, Zaxcom & Wisycom) 99x78mm

Read more less

These versatile belts are 5cm wide by 115cm long and can be cut down with scissors to suit small waists. They have been designed for use with our range of URSA Belt Pouches which come in four sizes (mini, small, medium & large) to suit all TX units. URSA Belts come in 2 Colours: Beige or Black. Machine Washable at 40 degrees, tumble dry at a low heat. They can also be used with AquaPacs or as a strap to clip transmitters onto. We developed a special double bonded fabric specifically for these belts which is gives them more strength, return and adds a little thickness. This helps keep the belts from stringing up under the weight of transmitters. They could be particularly useful for theatre and live performance where artists often have to rig two transmitters onto one belt. URSA Belts Demo URSA Straps use certified OEKO-TEX hypoallergenic fabric and gripper.

Read more less

This URSA Back Strap allows you to securely rig microphone or IEM packs to the centre of back, between the shoulder blades. Medium size fits a 36-40 inch chest and Large fits a 41-45 inch chest. Adjustable velcro straps Available now in Black & Beige and Small, Medium and Large Transmitter can be rigged with the aerial facing down or up. Fits all transmitter/receiver sizes Rigs pack between the shoulder blades Machine Washable with detergent at 40 Degrees. Hang dry or Tumble Dry. URSA Straps use certified OEKO-TEX hypoallergenic fabric and gripper. URSA Back Strap Demo Product Specifications Strap Type Leg Strap Size Comparison Medium Size 36-40 inch Chest Large Size 41-45 inch Chest     Pouch Size Transmitter Compatibility Universal Pouch Audio Ltd 2040, Mini TX, A10, EN2 Shure PSM 1000, 900, 300, QLX, ULX, AD1, AXT Tascam DR-10L Sony UWP-D11 Saramonic UWMIC9 TX9 Lectrosonics LMb, WM, UM400a, DCHT, SMDB, SMB, LT & SSM Wisycom MPT40 / 41 Zaxcom TRX & ZFR, TRX LA2 & LT2, ZFR 200 & 300 Sennheiser G2, G3, G4, AVX, SK2000, SK5212, SK9000, SK 5212, SK 9000 Micron TX700B, Shure UR1M, ADX 1M, Q5X PlayerMic S

Read more less

The original ultra-slim, breathable strap. URSA Straps are 1mm thick, comfortable, low-profile straps. Using New Fabric Technology to create a unique bonded fabric which hook Velcro can grip to at any point. Ankle Straps are available in 4 Colours : Beige, Black, White or Espresso. Big Pouch only to suit all units. Please see the below transmitter guide for details on which Pouch Size suits your transmitter. Dimensions: 39cm long x 10cm wide Unique oval of Gripper is fitted inside the Pouch to keep the transmitter in place. Big Pouches measure 10cm tall x 8cm wide Integrated cable pocket allow the mic cable to be looped and secured on the strap without the need for sticky tape. Colour Coded labels allow quick identification of strap size. URSA Straps are Machine Washable at 40 degrees Hang dry or Tumble dry at a low temperature. All our straps are manufactured by hand in the United Kingdom. The URSA Ankle Strap measures 39cm and is designed to wrap around the ankle. Available in 4 Colours (Black, Beige, White & Espresso). Product Specifications All URSA Leg Straps come fitted with a Big Pouch this means you get maximum compatibility with a snug fit on larger transmitters, whilst smaller units are looser, they are still held well within the pouch.   Strap Type Leg Strap Size Comparison Ankle Strap 39 x 10 cm Calf Strap 47 x 10 cm Thigh Strap 63 x 10 cm     Pouch Size Transmitter Compatibility Small Pouch Lectrosonics SMDB, SMB, LT & SSM Wisycom MPT40 / 41 Zaxcom TRX LA2 & LT2, ZFR 200 & 300 Sennheiser SK 5212, SK 9000 Micron TX700B, Shure UR1M, ADX 1M, Q5X PlayerMic S Big Pouch Audio Ltd 2040, Mini TX, A10, EN2 Lectrosonics LMb, WM, UM400a, SMDB, SMB, LT, DCHT Wisycom MPT40 / 41 Zaxcom TRX & ZFR full range Sennheiser G2, G3, G4, AVX, SK2000, SK5212, SK9000 Shure PSM 1000, 900, 300, QLX, ULX, AD1, AXT Micron Explorers & Audio Wireless Tascam DR-10L Sony UWP-D11 Saramonic UWMIC9 TX9 (Small Transmitters also fit in a Big Pouch)

Read more less

Heavy duty, reinforced mesh material. Tough bags! Different sizes for different purposes. For example, the mini one is perfect for odd bits like Whitworth screws, The Long one might be useful for keeping some matte box bars and the B4+ could hold a bunch of accessories cables. Really useful for organising your set bag. 500 microns thick.*Single Bag supplied (except for the Triple Pack which contains an A6, mini and DL). Assorted Random Colour zip Supplied (normally either; black, red, blue or purple).

Read more less

These tough and durable cases, designed by Motion Picture professionals, are made for everyone, and will prove invaluable when it comes to organising your everyday items. Keep your kit organised on set. We have tested a wide range of products in our cases such as makeup accessories, DSLR and video camera cables, musical instrument and speaker cables, computer, and laptop cables. In fact, the list is almost endless. What will you put in yours? The cases are made from Thermoplastic Polyurethane (TPU), making them easy to locate and organize your items as well as giving increased elasticity, and greater resistance to oil, grease, and abrasion, providing a more flexible, durable, and smoother case. Included in our design is flexible EVA (Ethylene Vinyl Acetate) which makes up the sides of the case and using coloured mesh and coloured zippers. Choose from a selection of vibrant colours that suit your mood so you can colour code to your hearts content. Sizes: Small - 170 x 50 x 135mm/63g (6.7 x 1.9 x 5.3 in./2.2 oz.) Medium - 210 x 50 x 145mm/75g (8.3 x 1.9 x 5.7 in./2.6 oz.) Large - 250 x 50 x 160mm/92g (9.8 x 1.9 x 6.3 in./3.2 oz.)

Read more less

The T Marker is a heavy-duty floor marker designed to mark the places of the actors on the set. It is filled with shot, making them extremely durable and heavy enough to stay in place. Utilise the eyelet to string them up for convenient storage and portability. Perfect for alternatives when you don't want to use tape markers. These markers are manufactured out of a PVC material. This allows them to be easily cleaned after use in muddy and/or dirty locations.

Read more less

The T Marker is a heavy-duty floor marker designed to mark the places of the actors on the set. It is filled with shot, making them extremely durable and heavy enough to stay in place. Utilise the eyelet to string them up for convenient storage and portability. Perfect for alternatives when you don't want to use tape markers.

Read more less

The Windkiller SE (Special Edition) combines Bubblebees finest quality fur, design and manufacturing standards to effectively protect your portable recorder mic(s) against wind noise. On the outside, The Windkiller SE features a high-density, soft, multi-pile fur to gradually slow the wind down before reaching your mic. Inside, The Windkiller SE uses a soft and smooth, open material, allowing the mic to sound as transparent as possible, while protecting your recordings against harmful wind noises. The Windkiller SE can be affixed to the base of your portable recorders mic capsule(s) using an elasticated drawstring, while the leather band securely grips your portable/handheld recorder to keep the windshield in place and prevent wind from entering through the base. The Windkiller SE has been designed with an elasticated drawstring, encased in a soft leather band to securely grip your portable recorder to keep the windshield firmly in place and prevent wind from entering through the base. The base of The Windkiller SE should sit at the top of your recorder, allowing clear visibility of your recorders LCD display and accessibility to any controls or buttons on the side of your portable recorder. FEATURES Available in three sizes to fit the most widely available portable recorders on the market. Uses the much-loved, multi-pile fur for the ultimate protection against wind noise. Transparent inner fabric maintains a very natural frequency response. Includes an aerated mesh carry case. Manufactured in Denmark with quality and comfort in mind by sound lovers, for sound lovers. HOW TO FIT: Loosen the drawstring all the way and pull The Windkiller SE over the top part of the body of your portable recorder. Then tighten the drawstring to ensure the leather band is seated snugly around the body, below the built-in microphone diaphragm(s). When fitted correctly, The Windkiller SE holds a bubble of dead air around the mic capsule, allowing the microphone to function as naturally as possible and minimising wind interference in your recordings. SIZE GUIDE: XS - ∅ 32mm - 46mm (BBI-WKSE-PR-XS) M - ∅ 52mm - 65mm (BBI-WKSE-PR-M) L - ∅ 55mm - 71mm (BBI-WKSE-PR-L) Compatibility Chart

Read more less

THE ANSWER TO YOUR PRAYERS IN COMPACT WIND PROTECTION...  Made for your boom or camera microphone. Handles medium to mild wind. Made from the best imitation fur (high amount of hair pieces per cm2) which allows for optimal wind protection versus frequency transparency. Specially designed rubber base for super easy and secure mounting. When wet, simply dry it up and shake the fur back into a perfect shape.  Designed in Denmark by sound lovers, for sound lovers.  The Windkiller is a short-haired wind protector that fits shotgun microphones from Audio-Technica, Audix, DPA, JVC, Neumann, Røde, Sanken, Schoeps, Sennheiser, Sony and others. See Chart. The core of the Windkiller consists of high quality coarse foam with Bubblebee’s carefully chosen soft and fluffy imitation fur on top. This faux-fur is highly durable, works excellent to block the wind and is aesthetically pleasing for the eye. In the bottom, The Windkiller is constructed with our specially designed rubber mount that grips unto your microphone while still making it perfectly easy to slide the Windkiller on and off. The Windkiller comes in five different sizes, from XS to XL, all with an rubber opening in the bottom that fits shotgun microphones with a diameter of 18-24 mm (0.7”-0.9”). THE BIG MOUNT These come in XS and XL sizes with a rubber opening in the bottom that fits microphones with a wider diameter of 23-26 mm (0.9"-1,02"). There is 5 sizes and two big mount versions to cover all major variants of shotgun microphone: Big Mount:

Read more less

YOUR LAVALIER MIC'S BEST FRIEND ON WINDY DAYS The Bubblebee Windbubble consists of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing. And this 'nothing' is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside. So instead of the wind hammering on the microphone and making those horrible, “I’m in the middle of a hurricane,” sounds, the capsule is kept in a calm space and allowed to perform at its best. WINDBUBBLE FEATURES: WORLD-RENOWNED PROTECTION FROM WINDBest in the industry wind protection thanks to the bubble-effect in the design. The construction of the Windbubble holds a quiet space around the mic capsule, allowing it to perform its duties in the best way possible and delivering detailed and natural sound to your transmitter or recorder. WINDBUBBLES WON'T FALL OFFThey are built to stay safe and secure on your Lavalier microphone, with a tight fitting opening aperture - hence the four available sizes.  CHOOSE YOUR SIZEAvailable in four different sizes for over 50 popular lavalier mics. Please consult our Size Guide to check this. CHOOSE YOUR COLOURAvailable in six different colours of high quality Bubblebee fur to make it easier to find a Windbubble for every occasion. NATURAL SOUNDOur fur and mesh construction makes The Windbubble acoustically transparent to keep the sound very close to the microphones natural frequency response. MULTI-PILE FURThe short, dense hair of the fur gives the Windbubble a rounded and organic shape while the longer fur slows wind down gradually for quieter wind protection. NATURAL COLOURSThe Bubblebee fur is less shiny to blend better with skin, clothes and other surrounding materials. QUALITY YOU CAN TRUSTDesigned in Denmark by sound lovers, for sound lovers! MOUNT THE WINDBUBBLE WITH CONFIDENCE The Windbubbles are specially constructed to be mounted quickly and easily on your specified type of microphones and to not fall off during use. To this end, the fit can be fairly tight around the base of the capsule. The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphone, by locating the hole easily. If the lav capsule is on the larger side, you can practise mounting the Windbubble on the tapered end of a ball-point pen as this helps get a feel for it. WHAT'S INCLUDED: Each package contains 1x Windbubble It is important that you check the correct size(s) suitable for your lavalier microphone. Please consult our Size Guide to check this. Size 1 - Built for microphones with a diameter of 3,0-4,0 mmElastic opening circumference: 28 mm (1.10”)For Example: Sanken COS-11 (without metal windscreen)Countryman B6, B2D, E6Sennheiser MKE 1Sony ECM-90DPA 6060 Size 2 - Built for microphones with a diameter of 5,0-8,0 mm:Elastic opening circumference: 35 mm (1.38”)For Example: Sanken COS-11 (without metal windscreen)Countryman B3DPA 4060Sennheiser MKE 2, ME2, ME2-US (without windscreen), ME2-IILOM Mikro Uši Size 3 - Built for microphones with a diameter of 5,0-9,0 mm:Elastic opening circumference: 40 mm (1.57”)For Example: Sanken COS-11 (with metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II Size 4 - Built for microphones with a diameter of 8,0-13,0 mm:Elastic opening circumference: 42 mm (1.65”)For Example:Sanken COS-11 (with large metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)LOM Uši Pro

Read more less

YOUR LAVALIER MIC'S BEST FRIEND ON WINDY DAYS The Bubblebee Windbubble consists of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing. And this 'nothing' is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside. So instead of the wind hammering on the microphone and making those horrible, “I’m in the middle of a hurricane,” sounds, the capsule is kept in a calm space and allowed to perform at its best. Each package contains two identical Windbubbles. WINDBUBBLE FEATURES: WORLD-RENOWNED PROTECTION FROM WINDBest in the industry wind protection thanks to the bubble-effect in the design. The construction of the Windbubble holds a quiet space around the mic capsule, allowing it to perform its duties in the best way possible and delivering detailed and natural sound to your transmitter or recorder. WINDBUBBLES WON'T FALL OFFThey are built to stay safe and secure on your Lavalier microphone, with a tight fitting opening aperture - hence the four available sizes.  CHOOSE YOUR SIZEAvailable in four different sizes for over 50 popular lavalier mics. Please consult our Size Guide to check this. CHOOSE YOUR COLOURAvailable in six different colours of high quality Bubblebee fur to make it easier to find a Windbubble for every occasion. NATURAL SOUNDOur fur and mesh construction makes The Windbubble acoustically transparent to keep the sound very close to the microphones natural frequency response. MULTI-PILE FURThe short, dense hair of the fur gives the Windbubble a rounded and organic shape while the longer fur slows wind down gradually for quieter wind protection. NATURAL COLOURSThe Bubblebee fur is less shiny to blend better with skin, clothes and other surrounding materials. QUALITY YOU CAN TRUSTDesigned in Denmark by sound lovers, for sound lovers! MOUNT THE WINDBUBBLE WITH CONFIDENCE The Windbubbles are specially constructed to be mounted quickly and easily on your specified type of microphones and to not fall off during use. To this end, the fit can be fairly tight around the base of the capsule. The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphone, by locating the hole easily. If the lav capsule is on the larger side, you can practise mounting the Windbubble on the tapered end of a ball-point pen as this helps get a feel for it. It is important that you check the correct size(s) suitable for your lavalier microphone. Please consult our Size Guide to check this. Size 1 - Built for microphones with a diameter of 3,0-4,0 mmElastic opening circumference: 28 mm (1.10”)For Example:Sanken COS-11 (without metal windscreen)Countryman B6, B2D, E6Sennheiser MKE 1Sony ECM-90DPA 6060 Size 2 - Built for microphones with a diameter of 5,0-8,0 mm:Elastic opening circumference: 35 mm (1.38”)For Example:Sanken COS-11 (without metal windscreen)Countryman B3DPA 4060Sennheiser MKE 2, ME2, ME2-US (without windscreen), ME2-IILOM Mikro Uši Size 3 - Built for microphones with a diameter of 5,0-9,0 mm:Elastic opening circumference: 40 mm (1.57”)For Example:Sanken COS-11 (with metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II Size 4 - Built for microphones with a diameter of 8,0-13,0 mm:Elastic opening circumference: 42 mm (1.65”)For Example:Sanken COS-11 (with large metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)LOM Uši Pro

Read more less

The Spacer Bubble, is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions. The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A short-haired fur cover is available separately if you need it. Each component of this Spacer Bubble is PMS colour 2035 (Red). The Spacer Bubble is available in red, black, green and blue. FEATURES: Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh' and wind. Specially designed rubber base for super easy and secure mounting. Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible. Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection. Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally. Available in seven different sizes - to ensure you find a size that perfectly fits your favourite shotgun mic. Save valuable time while getting the best quality. Practical mesh bag included for easy storage and fast mounting. Designed in Denmark by sound lovers, for sound lovers. The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom. The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds. When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready! The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you're working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency. WHAT’S INCLUDED: 1x The Spacer Bubble 1x The Long-Haired Spacer Cover 1x Mesh Storage Bag   WHICH SPACER BUBBLE SIZE?We offer five different lengths and two different mount sizes: Weight XS:Mesh base: 40g (1,4oz)Long-haired slip on fur: 20g (0,7oz) Full weight w/ packaging: 260g (9,1oz) Weight S:Mesh base: 50g (1,7oz)Long-haired slip on fur: 25g (0,8oz)Full weight w/ packaging: 275g (9,7oz)   Weight M:Mesh base: 55g (1,9oz) Long-haired slip on fur: 30g (1oz)Full weight w/ packaging: 290g (10,2oz) Weight L:Mesh base: 60g (2,1oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 300g (10,5oz) Weight XL:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging:305g (10,7oz) Big Mount: Weight XS Big Mount:Mesh base: 40g (1,4oz) Long-haired slip on fur: 20g (0,7oz)Full weight w/ packaging: 260g (9,1oz) Weight XL Big Mount:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 305g1 (0,7oz)

Read more less

The Spacer Bubble, is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions. The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A short-haired fur cover is available separately if you need it. Each component of this Spacer Bubble is PMS colour 354c (chroma green), the perfect tool to allow you to get your microphone closer to the sound source in green screen environments. The Spacer Bubble is available in red, black, green and blue. FEATURES: Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh' and wind. Specially designed rubber base for super easy and secure mounting. Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible. Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection. Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally. Available in seven different sizes - to ensure you find a size that perfectly fits your favourite shotgun mic. Save valuable time while getting the best quality. Practical mesh bag included for easy storage and fast mounting. Designed in Denmark by sound lovers, for sound lovers. The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom. The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds. When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready! The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you're working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency. WHAT’S INCLUDED: 1x The Spacer Bubble 1x The Long-Haired Spacer Cover 1x Mesh Storage Bag   WHICH SPACER BUBBLE SIZE?We offer five different lengths and two different mount sizes: Weight XS:Mesh base: 40g (1,4oz)Long-haired slip on fur: 20g (0,7oz) Full weight w/ packaging: 260g (9,1oz) Weight S:Mesh base: 50g (1,7oz)Long-haired slip on fur: 25g (0,8oz)Full weight w/ packaging: 275g (9,7oz)   Weight M:Mesh base: 55g (1,9oz) Long-haired slip on fur: 30g (1oz)Full weight w/ packaging: 290g (10,2oz) Weight L:Mesh base: 60g (2,1oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 300g (10,5oz) Weight XL:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging:305g (10,7oz) Big Mount: Weight XS Big Mount:Mesh base: 40g (1,4oz) Long-haired slip on fur: 20g (0,7oz)Full weight w/ packaging: 260g (9,1oz) Weight XL Big Mount:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 305g1 (0,7oz)

Read more less

The Spacer Bubble, is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions. The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A short-haired fur cover is available separately if you need it. Each component of this Spacer Bubble is PMS colour 2728c (chroma blue), the perfect tool to allow you to get your microphone closer to the sound source in blue screen environments. The Spacer Bubble is available in red, black, green and blue. FEATURES: Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh' and wind. Specially designed rubber base for super easy and secure mounting. Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible. Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection. Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally. Available in seven different sizes - to ensure you find a size that perfectly fits your favourite shotgun mic. Save valuable time while getting the best quality. Practical mesh bag included for easy storage and fast mounting. Designed in Denmark by sound lovers, for sound lovers. The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom. The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds. When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready! The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you're working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency. WHAT’S INCLUDED: 1x The Spacer Bubble 1x The Long-Haired Spacer Cover 1x Mesh Storage Bag   WHICH SPACER BUBBLE SIZE?We offer five different lengths and two different mount sizes: Weight XS:Mesh base: 40g (1,4oz)Long-haired slip on fur: 20g (0,7oz) Full weight w/ packaging: 260g (9,1oz) Weight S:Mesh base: 50g (1,7oz)Long-haired slip on fur: 25g (0,8oz)Full weight w/ packaging: 275g (9,7oz)   Weight M:Mesh base: 55g (1,9oz) Long-haired slip on fur: 30g (1oz)Full weight w/ packaging: 290g (10,2oz) Weight L:Mesh base: 60g (2,1oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 300g (10,5oz) Weight XL:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging:305g (10,7oz) Big Mount: Weight XS Big Mount:Mesh base: 40g (1,4oz) Long-haired slip on fur: 20g (0,7oz)Full weight w/ packaging: 260g (9,1oz) Weight XL Big Mount:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 305g1 (0,7oz)

Read more less

The Spacer Bubble, is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions. The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A short-haired fur cover is available separately if you need it. The Spacer Bubble is available in red, black, green and blue. FEATURES: Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh' and wind. Specially designed rubber base for super easy and secure mounting. Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible. Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection. Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally. Available in seven different sizes - to ensure you find a size that perfectly fits your favourite shotgun mic. Save valuable time while getting the best quality. Practical mesh bag included for easy storage and fast mounting. Designed in Denmark by sound lovers, for sound lovers. The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom. The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds. When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready! The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you're working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency. WHAT’S INCLUDED: 1x The Spacer Bubble 1x The Long-Haired Spacer Cover 1x Mesh Storage Bag   WHICH SPACER BUBBLE SIZE?We offer five different lengths and two different mount sizes: Weight XS:Mesh base: 40g (1,4oz)Long-haired slip on fur: 20g (0,7oz) Full weight w/ packaging: 260g (9,1oz) Weight S:Mesh base: 50g (1,7oz)Long-haired slip on fur: 25g (0,8oz)Full weight w/ packaging: 275g (9,7oz)   Weight M:Mesh base: 55g (1,9oz) Long-haired slip on fur: 30g (1oz)Full weight w/ packaging: 290g (10,2oz) Weight L:Mesh base: 60g (2,1oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 300g (10,5oz) Weight XL:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging:305g (10,7oz) Big Mount: Weight XS Big Mount:Mesh base: 40g (1,4oz) Long-haired slip on fur: 20g (0,7oz)Full weight w/ packaging: 260g (9,1oz) Weight XL Big Mount:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 305g1 (0,7oz)

Read more less

FOR ULTIMATE TRANSPARENCY AND INVISIBILITY... The Invisible Lav Covers - Original allow you to easily mount and hide your lavalier microphones directly on the skin or on clothing, whilst protecting your audio against clothing rustle. Each package of The Invisible Lav Covers Big Bag - Original consists of 40 pieces of mesh fabric, each reusable 3-4 times, for at least 120 mounts (choose from black/beige/white). FEATURES: Optimal for use under clothing Provides you with ultimate transparency and invisibility when mounting your lavalier mics Available in black, beige or white Stick directly to the skin or clothing 40 pieces of reusable aerated mesh fabric Each piece can be used at least 3 times, giving you 120 mounts per bag Comes in a useful reusable zip-lock storage pouch Designed in Denmark by Sound Lovers, for Sound Lovers While the fabric can be used many times, you will be able to do a minimum of 120 mounts per pack. Use their transparent, double-sided Invisible Lav Tape (sold separately) to keep your microphone and Invisible Lav Cover firmly in place whilst sticking directly to the skin or to clothing allowing the microphone to be safely and securely mounted almost anywhere. It’s all about being creative: under the collar, next to a buttonhole, or under the clothing in the chest area. Not sure which colour to use? The Invisible Lav Covers - Original are also available in a smaller multipack, that also includes our Invisible Lav Tape. SPECIFICATIONS Each piece of fabric and tape measures 2.2 cm x 2.2 cm (0.86” x 0.86”), and comes in a handy reusable zip-lock storage pouch. Item codes: BBI-ILC-O-40BK/BE/WH Product warranty: This product is covered by their two-year warranty securing against defects in material, design and workmanship. The full-length warranty is available for download here. Also available: Invisible Lav Covers, Big Bag - Fur Outdoor: For ultimate wind protection and fabric noise reductionInvisible Lav Covers, Big Bag - Moleskin: For ultimate invisibility and fabric noise reduction

Read more less