An extra hand by your side. Acting as a tool leash, the Gaffer Holder quickly and securely offers an accessible strap for holding tools, clamps, bags and its original design intention gaffer tape. The quick release buckle allows for single handed use, while the adjustable strap provides up to a 70cm circumference for larger items. The lightweight aluminium snap hook secures the holder to your belt, or any compatible Dirty Rigger tool pouch or tool belt. Mag Holder. Multi-purpose strap Quick release buckle Adjustable strap provides up to a 70cm circumference Lightweight aluminium snap hook Gaffer roll not included. General use only. Not intended for working at height or fall arrest.

Read more less

These Sausage Markers are ideal for location / actor standpoints on the stage, film sets or outside shots. Weighted with 300g of stainless steel shot this Sausage Stage Marker can be used in wind and rain filled conditions without worry.  Key features: Heavy-duty, colour-coded stage markers Ideal for temporary marking on-the-spot Use indoors and outdoors Weighted with 300grams of stainless steel shot Sturdy brass eyelet for additional fastening Reusable – a great alternative to single-use tapes Made in the UK Dimensions – 30cm (L) x 5cm (W) Point marking – virtually anywhereFlexible, hard-wearing and colour-coded stage markers. Made from ultra-tough webbing and weighted with 300grams of steel shot, these stage markers can be used almost anywhere. Mark points where gaffer tape can’t.Unlike traditional gaffer tapes, stage markers don’t rely on adhesive. As a result, they can be used almost anywhere – from film sets on a beach, to even the most remote locations. Additionally, they’re just as at home in theatres, studios and live events. Drop and goThese Stage Markers are pre-weighted with 300grams of steel shot, helping them stay in place, even in windy conditions. For additional hold, their design includes a sturdy brass eyelet, which can be quickly – and securely – spiked in precisely the right spot. Reuse time and time againStage Markers can be a great alternative to single-use tapes. They can be reused again and again, and their robust construction helps them withstand the rigours of Film, TV and life on the road. This listing is for a single sausage marker only based on your colour selection.

Read more less

Store your essentials on this lightweight, compact Chest Rig with an integrated 15 lumen LED. The light source is easily removed for hand-held use and comes complete with a replaceable battery pack. A full-width zip-lock pouch gives quick access to your tools and an adjustable button-lock pocket holds most two-way radios. Integrated 15 lumen LED Auto shut-off power save feature Replaceable battery pack Ultra-durable 600 600 denier material Zip-lock central pocket 22cm(H) x 20cm(W) x 3cm(D)* Button-lock two-way radio pocket 10cm(H) x 6cm(W) x 3cm(D)* Front pocket with closure flap 14cm(H) x 10cm(W) x 2cm(D) Strap-mounted D-ring for additional attachments Fully adjustable shoulder and torso straps Unloaded size (main chest pack area) 20.5cm(H) x 20cm(W) x 4cm(D) Pouch contents not included. Measurements are approximate*Pockets may be more narrow at the base. Ensure tools remain securely held in place at all times.If using this item while working at height you should ensure tools are adequately secured and could not become a falling object hazard.

Read more less

Clip'em. Keep'em. Don’t leave gloves behind, clip them on right by your side with the Dirty Rigger Glove Clip. Single-handed unclip Engineer grade, ultra tough material Non-conductive 5kg/7lbs break-away Size: 12.5cm (L) x 3.3cm (W) Glove not included. Measurements are approximate.

Read more less

Breathable padded tool belt. Spread the load with an extra wide 12.7cm (5 ) padded belt-back, lined with a breathable mesh and specially selected foam for optimum all-day comfort. Move freely as the belt narrows at the front and sides, minimising bulk and restriction of movement, often found in wider belts. Four quick access, repositionable D-rings provide you with even more versatility for accessory attachment. Compatible with all Dirty Rigger tool pouches and accessories. Extra wide 5 inch padded back Narrower sides and front for freedom of movement Breathable mesh for ventilation Four repositionable D-rings for extra attachments Heavy duty, quick release belt buckle Outer belt strap 5cm wide Inner belt 9cm (front width) 12.7cm (back width) Adjust to fit sizes 30 -42

Read more less

Comfortable Durability. Provide your hands with a comfortable barrier against a moderate manual working lifestyle. The fitted design moves with your hands as you work, minimising the risk of snagging and making it a comfortably light glove to wear. Although light, the Comfort Fit doesn't hold back on durability. The breathable materials look after your hands on the inside, whilst the double-layered synthetic leather and double stitching do the hard work on the outside. Light & flexible for all-day comfort Snug fit to minimise snagging Double layered synthetic leather on palm and key wear areas Double stitching Double stitched lanyard eyelet on wrist cuff (lanyard not included) Neoprene knuckle padding Write on ID tag Low profile palm padding Machine washable at 30C This glove is currently undergoing PPE testing and should be considered suitable for general use in the meantime. For specific PPE requirements please refer to our specialised PPE range.

Read more less

Ventilated Tool Belt. Allow your waist to breathe with Dirty Rigger multi-layered material construction. The padded 3D internally-breathable mesh provides excellent ventilation throughout the belt, minimising uncomfortable under-belt sweat. Tried and tested heavy duty 50mm belt buckle helps to keep the Tool Belt comfortably secured around your waist and can be removed single handily when required. Fully compatible with the Dirty Rigger pouch and accessories range. Internally-breathable mesh for ventilation Quick release buckle 5cm (2in) belt Compatible with Dirty Rigger accessories Adjust to fits sizes 30in-42in

Read more less

It's all about the base. An abrasion and puncture-resistant 4mm rubber base helps prevent pointed tools from piercing through the bottom of the pouch. Keep your equipment organised with a 2.5ltr master pocket and 5 slip-in pockets positioned around the inner walls. Instantly access your most commonly used tools from four open-topped pockets on the bag s outer edges and a built in pass-through for a long handle screwdriver** gives even more versatility. 2.5ltr main storage pocket 17cm(W) x 8cm(D) x 19cm(H)* 5 slip-in inner pockets various sizes 2 instant access outer pockets (sides) 7cm(W) x 2.5cm(D) x 13.5cm(H)* 2 instant access outer pockets (front) 7cm(W) x 2.5cm(D) x 10cm(H)* Screwdriver pass-through** 4 steel d-rings for additional attachments Side mounted grab handle 50mm belt loop Rugged 600 600 denier nylon construction Overall dimensions 23cm(W) x 12cm(D) x 20cm(H) Pouch contents not included. Measurements are approximate *Pockets may be more narrow at the base. **Tool must be sufficiently wide inside of the pass-through in order for it to be retained in the pocket. Tools must be individually inspected to ensure they are held securely in place.

Read more less

Compact Versatility. Our unique design provides essential tool storage in an ultra-compact space. Simply attach it to your belt and you’ll almost instantly forget it’s there. This clenched-fist sized pouch utilises every millimetre of space with heavy duty elastic technology which constantly contracts to make the bag no bigger than it ever needs to be. With 6 screw-driver slots, 3 layered pockets and one expandable centre pocket, you’d be amazed just how much you can get in. Compact expandable storage Shape-mantaining structure Magnetic closure flap 4 external open-bottomed screwdriver pockets 2 internal screwdriver pockets 1 internal back pocket – 8cm(H) x 6cm(W)* 1 internal central storage pocket – 8cm(H) x 6cm(W) x 5cm(D)* 2 front mounted pockets – 7cm(H) x 7cm(W)* Belt loop attachment Ultra-durable 600×600 denier material Unloaded size 14cm(H) x 9.5cm (W) x 5cm (D)* Pouch contents not included. Measurements are approximate*Pockets may be more narrow at the base/edge. Ensure tools remain securely held in place at all times.If using this item while working at height you should ensure tools are adequately secured and could not become a ‘falling object’ hazard.

Read more less

Super-Light Touch Screen Compatibility. Almost unnoticeable at only 40g per glove* the Comfort Fit 0.5 allows you to work comfortably with an incredibly light and flexible barrier. Feel through the glove with incredible dexterity and virtually unrestricted movement thanks to a durable one-piece synthetic leather palm. Fully equipped with Dirty Rigger double-stitched seams, Airprene knuckle padding and breathable glove back, the 0.5 provides exceptional performance for general tasks. Lightweight high-dexterity glove Durable one-piece synthetic leather palm Low profile black-out design Interact touch-screen compatible technology Airprene knuckle padding Double-stitched seams *Weight per glove in Medium size. Weights may vary for other sizes. This glove is intended for general use. If your work is more demanding or requires a specific PPE rating, a glove from our Heavy Duty range may be more suitable.

Read more less

Low profile, light weight and extremely durable. The Pro-Pocket 2.0 has a unique layout design which enables it to hold a professional’s must-have tools and necessities with minimal bulk. Increased durability with 1200 denier nylon polyester (previously 600). Wider phone pocket, 10cm(h) x 7.5cm(w) x 2cm(d) now fits most larger smart phones. 1 x Side mounted D-rings 1 x Detachable 26cm accessory loop Single-handed tool access Low profile, unobtrusive design Easy on/off belt flap (allowing independent removal from belt) Integrated accessory loop with snap hook included 1 x internal tool pocket: 10cm(h) x 3cm(w) x 2.5cm(d) 1 x open-bottomed tool pocket (2.5cm diameter) 1 x open-bottomed tool pocket (3cm diameter) 1 x open-bottomed tool pocket (2cm diameter) 1 x open-bottomed pen pocket 1 x side-mounted podger pocket (2cm diameter) Hook & loop closure flap Overall pouch size 20cm(h) x 14cm (w) x 4.5cm (d) – Main structure only (excludes snap hook and accessory loop) Tool bag contents not included. Measurements are approximate. Ensure tools remain securely held in place at all times. If using this item while working at height you should ensure tools are adequately secured and could not become a ‘falling object’ hazard.

Read more less

Hands-on Heat Protection. World class DuPont Nomex lining encases your hands in a heat and flame resistant barricade throughout the glove. Rated to 250 C for up to 15 seconds, the Phoenix provides a skin-protecting barrier when working with high-temperature items. Specially selected double-layered leather additionally defends the palm and key wear areas against abrasions. A one-piece leather layer on the palm is enhanced with an articulated second layer to allow exceptional freedom of movement as you work. All combined with DuPont Kevlar double stitched seams to brace an incredibly durable glove. EN407: 2004 Clause 2 Contact Heat Performance Level 2 Rated to 250 C for up to 15 seconds Abrasion resistant, double layered leather palm Articulated second layer for exceptional freedom of movement (palm side) DuPont Kevlar double stitched seams Snug fit to minimise snagging Write-on ID Tag

Read more less

Your 3rd Skin. A raw grit workman's glove. Specially selected, double-layered goat skin hide creates an exceptional defence for the palm of your hands. A one-piece palm base combines with an articulated second layer to allow optimum freedom of movement as you work. Dirty Rigger select leather delivers a natural ability to resist friction, providing a barrier for your hands when working with rope, cables and staging. A lighter back on the glove minimises heat build-up and helps maintain a comfortable flow of air as you work. Genuine leather palm Ultra-durable, double-layered leather palm Articulated second layer for freedom of movement (palm side) Double stitched seams Breathable glove back to relieve heat Snug fit to minimise snagging Write-on ID tag This glove is currently undergoing PPE testing and should be considered suitable for general use in the meantime. For specific PPE requirements please refer to our specialised PPE range.

Read more less

Dexterity at your fingertips, literally. The Comfort Fit™ Glove range has always been light to wear, but the new Fingerless glove takes it to a new level. The high-cut styling gives you exceptional freedom when undertaking the most intricate tasks, yet over 90% of your hand still remains covered*. The fitted design moves with your hands as you work, minimising the risk of snagging and making it a comfortably light glove to wear. Although light, the Comfort Fit™ doesn’t hold back on durability. The breathable materials look after your hands on the inside, whilst the double-layered ultra-tough synthetic leather and double stitching do the hard work on the outside. Light & flexible for all-day comfort Snug fit to minimise snagging Double layered synthetic leather on palm and key wear areas Double stitched seams Neoprene knuckle padding Write-on ID tag Double stitched lanyard eyelet on wrist cuff (lanyard not included) Low profile palm padding

Read more less

The handy little pocket for your Podger Keep your podger right by your side with the Dirty Rigger® Podger Holster. Tidy and discreet, the holster is designed to fit the Dirty Rigger 4-in-1 Podger and most other podgers of equal size. Discreet podger holster Durable 1200 denier nylon polyester construction Moulded EVA foam helps maintain holster shaping Belt clip & belt loop for your preferred attachment Podger not included. Measurements are approximate. Ensure tools remain securely held in place at all times.If using this item while working at height you should ensure tools are adequately secured and could not become a ‘falling object’ hazard.

Read more less

More tools, minimal bulk. The Pro-Pocket™ XT provides a tool storage solution which falls between the Pro-Pocket™ 2.0 and the Tech Pouch / Tech Pouch 2.0 for storage capacity. While still relatively compact, its innovative internal and external layout provides an impressive level of tool storage with minimal bulk. Vertical storage, quick-access layout 1 x internal smart phone compartment: 10cm(h) x 8cm(w) x 3cm(d) (fit sizes up to iPhone 6/7 Plus) 1 x internal tool compartment: 15cm(h) x 6cm(w) x 4cm(d) 2 x external, instant-access elasticated tool loops (2cm un-stretched diameter) 2 x external D-ring attachments 1 x detachable 27cm accessory loop 1 x top-mounted snap hook 2 x vertical tool slots mounted in each internal compartment (4 slots in total) Headphone cable pass-through (phone compartment only) Constructed from durable 1200×1200 denier nylon polyester Belt clip & belt loop for preferred attachment Tool bag contents & accessories not included. Measurements are approximate. Ensure tools remain securely held in place at all times.If using this item while working at height you should ensure tools are adequately secured and could not become a ‘falling object’ hazard.

Read more less

Rugged ultra-light storage. Weighing less than 300grams, the Tech Pouch helps you keep tools organised with a 2.5ltr master pocket and 5 slip-in pockets positioned around the inner walls. Instantly access your most commonly used tools from two open-topped pockets on the bag s outer edges and a built in pass-through for long handle screwdrivers** gives even more versatility. A handy button-lock front pocket holds most 8m tape measures and two additional open-topped mini pockets give you somewhere to store those often illusive smaller items. FEATURES:  2.5ltr main storage pocket 17cm(W) x 8cm(D) x 19cm(H)* 5 slip-in inner pockets various sizes 2 instant access outer pockets 7cm(W) x 2.5cm(D) x 13.5cm(H)* Button-lock tape measure holder 7cm(W) x 7cm(D) x 7cm(H)* 2 mini pockets Screwdriver pass-through** 4 steel d-rings for additional attachments Side mounted grab handle 50mm belt loop Rugged 600 600 denier nylon construction Overall dimensions 23cm(W) x 19cm(D) x 20cm(H) Pouch contents not included. Measurements are approximate *Pockets may be more narrow at the base. **Tool must be sufficiently wide inside of the pass-through in order for it to be retained in the pocket. Tools must be individually inspected to ensure they are held securely in place

Read more less

Your 3rd Skin. A raw grit workman's glove. Specially selected, double-layered goat skin hide creates an exceptional defence for the palm of your hands. A one-piece palm base combines with an articulated second layer to allow optimum freedom of movement as you work. Dirty Rigger select leather delivers a natural ability to resist friction, providing a barrier for your hands when working with rope, cables and staging. A lighter back on the glove minimises heat build-up and helps maintain a comfortable flow of air as you work. Genuine leather palm Ultra-durable, double-layered leather palm Articulated second layer for freedom of movement (palm side) Double stitched seams Breathable glove back to relieve heat Snug fit to minimise snagging Write-on ID tag This glove is currently undergoing PPE testing and should be considered suitable for general use in the meantime. For specific PPE requirements please refer to our specialised PPE range.

Read more less

Super-Light Touch Screen Compatibility. Almost unnoticeable at only 40g per glove* the Comfort Fit 0.5 allows you to work comfortably with an incredibly light and flexible barrier. Feel through the glove with incredible dexterity and virtually unrestricted movement thanks to a durable one-piece synthetic leather palm. Fully equipped with Dirty Rigger double-stitched seams, Airprene knuckle padding and breathable glove back, the 0.5 provides exceptional performance for general tasks. Lightweight high-dexterity glove Durable one-piece synthetic leather palm Low profile black-out design Interact touch-screen compatible technology Airprene knuckle padding Double-stitched seams *Weight per glove in Medium size. Weights may vary for other sizes. This glove is intended for general use. If your work is more demanding or requires a specific PPE rating, a glove from our Heavy Duty range may be more suitable.

Read more less

Super-Light Touch Screen Compatibility. Almost unnoticeable at only 40g per glove* the Comfort Fit 0.5 allows you to work comfortably with an incredibly light and flexible barrier. Feel through the glove with incredible dexterity and virtually unrestricted movement thanks to a durable one-piece synthetic leather palm. Fully equipped with Dirty Rigger double-stitched seams, Airprene knuckle padding and breathable glove back, the 0.5 provides exceptional performance for general tasks. Lightweight high-dexterity glove Durable one-piece synthetic leather palm Low profile black-out design Interact touch-screen compatible technology Airprene knuckle padding Double-stitched seams *Weight per glove in Medium size. Weights may vary for other sizes. This glove is intended for general use. If your work is more demanding or requires a specific PPE rating, a glove from our Heavy Duty range may be more suitable.

Read more less

So light you won’t want to take them off.So versatile you won’t need to. Keep your ring & little finger are covered, whilst the tips of your thumb, middle and index finger remain instantly accessible for intricate tasks. The fitted design moves with your hands as you work, minimising the risk of snagging and making it a comfortably light glove to wear. Although light, the Comfort Fit™ doesn’t hold back on durability. The breathable materials look after your hands on the inside, whilst the double-layered ultra-tough synthetic leather and double stitching do the hard work on the outside. Light & flexible for all-day comfort Snug fit to minimise snagging Double layered synthetic leather on palm and key wear areas Double stitched seams Double stitched lanyard eyelet on wrist cuff (lanyard not included) Neoprene comfort padding Write on ID tag

Read more less

These Dirty Rigger SlimFit XS gloves offer a working day of ease due to its comfortable, light and breathable material that features a synthetic leather palm while combining a second layer in those key areas that suffer from wear and tear giving these gloves excellent durability and flex while you are on the go. Designed for smaller hands down to size XS Light & flexible for all-day comfort Palm comfort padding Write on ID Tag Eyelet hole for belt clip attachment Easy-on pull tab

Read more less

A robust metric combination podger. 4 socket sizes including 17, 19, 21 and 24 mm all constructed from solid steel and coated in an ultra-tough nickle chrome plating. Compatible with Dirty Rigger® tool/podger lanyard. Solid steel construction Metric combination Nickle chrome plating Four socket sizes: 17, 19, 21 and 24mm 24cm short handle design Total size 24cm (L) x 6.7cm (W) x 3.6cm (D) Measurements are approximate

Read more less