Static Free Plast-N-Glas effectively cleans, polishes and eliminates static charges. A single application dissipates electrostatic buildup while also removing dirt, grease, ink, fingerprints and nicotine stains. Static Free Plast-N-Glas will not streak, smear, scratch, or abrade. Leaves surfaces thoroughly clean for improved optical clarity and distortion-free reading
Controls static, cleans and polishes in one application
Effectively removes handling oils, finger soils and nicotine stains
Prevents attraction of dust and dirt
Compatible with plastics, glass and stainless steel
Foaming spray won't run or drip; ideal for optical surfaces
Not for use on anti-glare coating or mesh screens
Applications
Cleaning computer monitors and housings
Removing handling soils from precision glassware
Maintaining cleanliness of observation windows on production equipment
Dirty Down - Frost and Snow Effect Spray (400ml) is a semi-permanent, non-yellowing effects spray that creates realistic frost and snow effects on costumes, props and set dressing. Fast drying and sticks upon contact, it applies to fabric, glass, wood, metal and most other surfaces, and builds up in layers for deeper coverage.
Press nozzle gently for a light dusting of frost/snow.
Fully depress nozzle to spray a thicker layer of snow.
Build up layers of snow by spraying more coats.
Apply to almost any surface including fabrics, costumes, glass, furniture, metal etc.
400ml sized spray.
Ozone friendly.
Instructions for Use:
The spray can must be at room temperature to work, not cold. The nozzle may not work if the spray can is cold. For best results, store overnight at room temperature before use.
Shake the spray can with the ball bearing rattling before each application of snow spray. The ball bearing will not rattle if the spray can is too cold and the spray can may not spray.
To clear the nozzle and prevent blocking, after each application of snow spray hold the spray can upside down and spray it for one second (while upside down).
If the spray can will not spray, the red nozzle on top of the spray can may be blocked. To clear the blockage, pull the red nozzle off the top of the spray can and place it in very hot, (just boiled) water for a few minutes. Do not place the entire spray can in very hot water, only the red nozzle.
Ensure surfaces are dry and grease free.
Mask areas not to be sprayed.
Snow spray may stain/damage some surfaces.
For a thin even layer of snow hold can upright 30cm (300mm) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed, (the spray comes out of the nozzle very fast). For thicker layers of snow apply several coats.
For small piles of snow, hold the spray can closer to the surface and apply snow spray to small areas at a time with the nozzle fully depressed.
Gently press nozzle for a light dusting of frost/snow.
For patches, spray through a hole cut in a piece of paper.
Practice spraying on disposable items before final use.
Test before use on hidden surfaces/off-cuts for compatibility and adhesion.
To make snow permanent, apply fixative/varnish spray between coats of snow as well as over the last coat.
Remove snow from smooth surfaces such as glass by scraping off excess snow and wiping with a dry cloth and wax based polish. Do not use soap and water. Snow sprayed onto rough surfaces is more difficult to remove.
Safety: DG (Dangerous Goods) aerosol. Flammable liquid and vapour, causes severe eye irritation.
Universal applications across all industries
Highly effective on slides, bearings, conveyors & manufacturing equipment
Lubricates window channels, CV boots & hoses
Safe for environments where non-direct contact with food stuffs may be a risk
A fantastic product with literally 1000’s of uses.
It has universal applications across all industries.
Highly effective on manufacturing equipment.
Lubricates window channels, CV boots and hoses, also great for curtain runners on wagon curtain side trailers.
Also has a use for inflatable slides to minimise friction.
Safe non-direct contact with food stuffs.This silicone spray is highly effective as a surface polish
WD-40 Specialist® White Lithium Grease is ideal for metal-to-metal applications that require heavy-duty lubrication and leaves behind a rust-inhibiting barrier for protection against corrosion.
This long-lasting formula won't melt, freeze, or run in harsh weather conditions.
Also great for lubricating equipment before placing in storage.
Sprays on easily with a thick, protective coating for outdoor and automotive hinges, gears, sprockets, latches, door tracks, pulleys, cables and guide rails.
Safe to use on metals.
Effective in temperatures ranging from 0° F to 300° F for unbeatable protection.
The WD-40 400ml specialist spray is premium-quality grease, specifically designed for use in areas where longer-term corrosion protection and lubrication is required. The physical properties of this product make it ideal for use on vertical surfaces as it is thick and tacky to prevent running or product displacement.
Warning:Do not use on plastic surfaces or hot metallic surfaces
Features
The non-drip formula doesn’t run and stays where it is applied
Water-resistant
Smart straw allows precise application
Quite long-lasting and affordable
Excellent load-carrying properties
Excellent water displacement properties
Wide temperature ranging between -20⁰C and 115⁰C as gel
Features:
Simoniz Back To Black Tyre Shine
Advanced formula for a deep, gloss black shine
For a durable, long lasting shine
Quick, easy, clean hand formula
Comes in a 500ml aerosol with 20% extra free (600ml)
