These Poly bags can be used to cover all sorts of kit. Commonly fashioned into custom camera covers or monitor covers. Transparent Polythene 500 gauge thickness makes them very durable and less likely to develop a hole. Available in two sizes 60cm x 60cm (2'x2') or 120cm x 120cm (4'x4'). *Please allow a small tolerance in the sizes due to manufacturing. aka: Polys, 2x2, 4x4, Cover, Rain Cover

Read more less

Releasable and Reusable cable ties. Can be used for tidying cables, cable retention and numerous other purposes Sold in bags of 100. Releasable Locking Simple to install and release Sold in three lengths: Small - 150mm Medium - 200mm Large - 300mm

Read more less

Engraved plastic plaque with 3M adhesive backing. Beveled edge.

Read more less

Disposable shower caps. Clear. Large, 20" in size. Useful for quickly covering small cameras or lenses to protect them from water or dust. Sold as a pack of 10.

Read more less

A high-quality flame retardant PVC electrical tape is available in a full range of colours. 19mm Wide 33m length On a 1 core. Performance Data Type of Film - PVC Thickness - 0.13mm Tensile Strength (Kg/cm) -2.5 Elongation at Break (Kg/cm) - 200 Adhesion (Kg/cm) - 18 Dielectric Breakdown (Volts) - 6,500 Dielectric Strength (Volts/mil) - 1,250 Also known as insulating tape, LX tape

Read more less

Hook and loop tape comes on a sticky-back self-adhesive liner, making it simple to cut to your desired size. Ideal for endless projects. Strong adhesion offering an instant bond to most surfaces. Offered in 25mm and 50mm widths. Sold by the Metre or pack of 25 Metre Rolls Aka: Velcro

Read more less

Our fully customised engraved Clapperboards are perfect for your longer running productions, special shoots or as a gift for a member of the crew as a small memento for their work on the production. They are also very popular with production companies as they can include their logo on the board. A custom board normally takes 3-4 working days from order to shipment. Sticks: Filmsticks Resin - These all weather sticks are hard wearing and durable, allowing them to perform better in wet conditions. Available in all 5 sizes of Clapperboard. Gripsticks Colour - Also suitable for all weather conditions, these lightweight sticks and colourful design ensures high visibility on set. Available in Small and Medium sizes. Gripsticks Greyscale - Also suitable for all weather conditions, these lightweight sticks can be secured to your board in seconds. Available in Small and Medium sizes.  Features: Deep Engraved and infilled for durability. Opaque 3mm plastic so that they can be back-lit for night shoots As standard, the design will be infilled Black. We can also infill unit letters (A, B, C etc) with the corresponding colours. Available in five sizes: Nano - 76mm W x 70mm H Tiny - 150mm W x 102mm H Small - 190mm W x 129mm H Medium - 280mm W x 190mm H (Most Popular) Large - 380mm W x 258mm H Note: Height measurement is the board without the sticks attached Design Process: The complete layout of the board can be engraved to how you would like it. Including production title, Director and DOP names, additional information boxes and fonts etc. If you want a specific layout we would ask for you to draw this out ahead of time and share it with us when you place the order. A limitation of an engraved board is that you cannot have complex multicolour designs. For example, a logo may have several colours in it, we would only be able to infill a single colour. Any colour other than our standard colours (Black, Red, Blue, Yellow, Green) is hand-mixed, therefor will be an approximation colour match. Order Process Place Order on our website. Please provide a sketch or/and a detailed description of how you would like the board to look. (Email this to team@cinestore.co.uk with your order number). Any logos/images need to be provided in high ref format, Preferably 300DPI in PDF, PNG, SVG or AI, however, feel free to send what you have and we can advise. We will put the design together and send it to you for your approval.  We allow for up to 2 minor revisions (including: font change, nudging of a line/text etc). Please allow time between edits. Any major revisions (such as a different layout) are chargeable at £20+VAT. Once you have approved the design, it will be sent to be produced. At this point, no further changes can be made.  Expect a minimum of two full working days from approval of the design for the board to be produced. You will receive a notification when you order ships.  Not included in the cost is; Licensing costs if you request a specific font. Complex artwork prep (for example, designing a logo from scratch). Major design revisions, More than 2 minor revisions.  This is for a complete Clapperboard with sticks. Replacement boards without sticks are also available. Custom clapperboards are non-returnable unless faulty. aka; clapperboard, slate, clapper board.

Read more less

This highly conformable double sided tape made from pressure-sensitive rubber resin bonds difficult substrates, such as polythene, polypropylene and many more. Ideal for joining polythene sheeting, bonding kick plates, bonding wires to road surfaces, mounting light weight items , roof bar bonding, the list goes on.

Read more less

Designed to fit in the slat on the lid of the Peli 1510. This engraved label is perfect for identifying your case. Comes with 3M adhesive backing to stick it on your case. Use our online designer tool to create the label how you like it. As this is a custom product, please allow around 1-2 working days for it to be produced. If you have ordered anything else from us we will not ship these until your Case Label is ready. TIP: We recommend you clean the area thoroughly with Isopropyl alcohol to ensure strong adhesion of the label. We will supply a wipe. Please note this product is exempt from our return policy as it is customised (unless faulty, then we will replace)

Read more less

Chamois leather is a natural product with unique properties allowing it to absorb up to 6 times its own weight in water. Commonly used on set to dry off equipment during wet weather. Another popular use is to place on top of a camera/lens to protect from light rain. Also perfect for use on cars ensuring a dry, streak-free finish. When dry, chamois leather is also ideal for polishing glass, windows, furniture and items of silver, leaving them dust free with a perfect shine. Available in 2 Sizes: Small - 2 Sq.Feet Large - 3 Sq.Feet

Read more less

Made from high tensile steel with a self colour finish, meaning these are uncoated. Angular lifts will significantly lower working load limits and should be avoided. Hardened/Tempered. Thread length approx 20mm. When using these for some applications such as on camera top handles, the thread may need cut down. This will jepordise the integrity of the eyebolt and to what they are rated to. Therefor we sell them in their original condition.

Read more less

Bolton is very useful for lighting, but also for covering over monitors in bright lighting situations. It's a more economical masking material than serge. Additionally can be used as a protective black backing to increase the density of serged masking flats which may otherwise bleed light from nearby lamps. 150cm / 60inch Wide 100% Cotton – 250gm/m² Masking Decorative / Scenic Set building/decorating Film and TV Studios NDFR (Non Durable Flame Retardant) - BS5867 When supplied by the metre, the fabric will be folded for shipping purposes. It will not be supplied on a roll unless you purchase a full roll. There is a tolerance of ~2cm per meter in length when bought by the meter. Sold by the Meter or by the Roll In-Store collection for Bolton by the Meter MUST be pre-ordered to allow time for it to be cut.

Read more less

Our Standard Engraved ClapperBoards are a must on any shoot. These are made in house and are a high-quality board built for life on set. This is for a complete ClapperBoard with sticks. Replacement boards without sticks are also available. Sticks: Filmsticks Resin - These all weather sticks are hard wearing and durable, allowing them to perform better in wet conditions. Available in all 5 sizes of Clapperboard. Gripsticks Colour - Also suitable for all weather conditions, these lightweight sticks and colourful design ensures high visibility on set. Available in Small and Medium sizes. Gripsticks Greyscale - Also suitable for all weather conditions, these lightweight sticks can be secured to your board in seconds. Available in Small and Medium sizes.  Features: Deep Engraved and infilled for durability. 3mm/4mm Plastic. (Depending on sticks, contact us if you need a specific thickness)  Opaque plastic so that they can be back-lit for night shoots Letters are Black infilled. Available in five sizes: Nano - 76mm W x 70mm H Tiny - 150mm W x 102mm H Small - 190mm W x 129mm H Medium - 280mm W x 190mm H - Standard Size Large - 380mm W x 258mm H Medium is the most popular and 'standard' size. We also offer a customised board design service that will allow you to fully customise the layout of your board. aka; clapperboard, slate, clapper board.

Read more less

3/8" Camera Screw

Read more less

1/4in Camera Screw 

Read more less

Genuine Chamois Leather/sponge on one side and fully cushioned single layer of foam on the other side for extra comfort. Available in four styles: Small ovals - 7.5cm x 10cm (3" x 4") Arri* Small rounds - 7.5cm (3") Mitchell, Panavision* Large round - 10.5cm (4.25") BETACAM, Other Broadcast cameras* Also knows as TBAs *The suggested cameras that these will work with are purely a guide, please check your eyepiece size prior to choosing your eyepiece cover to ensure it fits correctly.

Read more less

High Definition BNC Jack To Jack adaptor, 75OHM 3G HDTV These high-performance, 75-ohm types, have been developed specifically for HDTV applications and have an extremely low return loss

Read more less

Black Tac provides good adhesion to a wide range of substrates. 19mm Wide 2mm Thick Very conformable due to soft composition UV resistance. Does not set and remains flexible. Also known as Black Tack or Butyl tape.

Read more less

Our Standard Engraved Boards are a must on any shoot. These are made in house and are a high-quality board built for life on set. This is for a Replacement Board only, no sticks are supplied. Complete Clapperboards with sticks are also available. Features: Deep Engraved and infilled for durability. 3mm/4mm Plastic. (Depending on sticks, contact us if you need a specific thickness)  Opaque plastic so that they can be back-lit for night shoots Letters are Black infilled. Available in five sizes: Nano - 76mm W x 70mm H Tiny - 150mm W x 102mm H Small - 190mm W x 129mm H Medium - 280mm W x 190mm H - Standard Size Large - 380mm W x 258mm H Medium is the most popular and 'standard' size. We also offer a customised board design service that will allow you to fully customise the layout of your board. aka; clapperboard, slate, clapper board.

Read more less

These Emergency Blankets can be used as camera covers that are perfect for keeping dust and light rain off your camera and head when they are not in use. Silver inside to help reflect heat/sun. Available in red or blue aka spaceblanket. space blanket

Read more less

This exhibition Double Sided Tape is designed and manufactured for use at events and exhibitions. A differential adhesive system ensures carpets are cleanly peeled from exhibition floors. With its design comes a two-strength adhesive. On the open side, a medium-tak adhesive allows good 'grab' on a variety of clean dry surfaces and, most importantly, maintains excellent 'clean peel' properties. • Low-tak peelable adhesive* (open side – exposed as you peel off the roll)• High-tak permanent adhesive (closed side – under release liner)• Two-Strength Adhesive Applications and Industries• Temporary floor coverings• Exhibitions & conferences• Loose lay vinyl floor installations Has the text 'N.E.C APPROVED' printed on the tape. We and this product is not endorsed, approved or associated with the NEC Group. All trademarks are the property the NEC Group.

Read more less

These are 25g sachets High quality silica gel sachets Removes humidity in sealed packages preventing corrosion, condensation, damp, mould etc Each sachet contains desiccant which can adsorb and hold up to a third of its weight in water vapour As a guideline we recommend approx. 5 gram of silica gel for every cubic foot of package and ensure you package is as airtight as possible for the best performance Printed "Do Not Eat" Useful for putting in with lenses or camera to help reduce the moisture in the case/bag. Also can be used in situations like in a car to try to reduce the moisture build up on the windows. Silica gel helps absorb condensation helping protect whatever its placed with. Put these in with electronics, media or anything else. They can also be used in a car to help reduce the amount of condensation in the windows when filming. The more the better with all these situations.

Read more less

Elasticated cover. Clear. Useful for quickly covering cameras setups to protect them from water or dust. Extra Large. Up to 100-150cm diameter Heavy gauge to ensure durability, while remaining lightweight. Sold individually.

Read more less

Hook and loop tape comes on a sticky-back self-adhesive liner, making it simple to cut to your desired size. Ideal for endless projects. Strong adhesion offering an instant bond to most surfaces. Offered in 50mm width. Sold by the Metre or pack of 25 Metre Rolls Aka: Velcro

Read more less