The iM2100 Peli Storm case is a watertight and lightweight protective case. Features: • Lightweight HPX resin • Press & pull latches • Rubber overmoulded handles • Rubber 'O-ring' seal • Vortex® valve • Plastic padlock hasps • IP67 rated protection Interior Dimension: 330 x 234 x 152 mm Exterior Dimension: 361 x 289 x 165 mm Weight: 1.91 kg

Read more less

The Peli 1300 is a small, easy to carry case from the Peli Protector range. It is available in a range of colours and with or without pick 'n' pluck foam. Features: • Automatic pressure equalisation valve • Easy-open latches • Rubber 'O-ring' seal • Plastic padlock hasps • IP67 rated protection Interior Dimension: 240 x 185 x 153 mm Exterior Dimension: 270 x 246 x 174 mm Weight: 1.4 kg

Read more less

An aluminium frame system for mounting equipment into the base or lid of a Peli Storm case.

Read more less

The Peli 1510 Studio Case is a variation of the popular 1510 Protector. The 1510SC comes with padded dividers and a laptop lid organiser, making the case perfect for storing camera equipment.

Read more less

Customise your case layout with a TrekPak divider system. Using the innovative and sturdy design, TrekPak allows you to optimise space while maximising protection.

Read more less

This is a mounting bracket to install electronics or instrumentation panels in Protector cases. An o-ring gasket seals the panel so that the case remains watertight, even with the lid open. Each kit includes a panel frame, brass inserts, mounting screws and an o-ring, and comes with simple instructions on how to screw the panel frame into the case.

Read more less

The Pick 'n' Pluck foam layer for the 1010 Micro Case.

Read more less

These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Peli cases have survived. Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware. FEAURES:  Interior: 21.1 × 14.7 × 9.5 cm Pick N Pluck™ with convoluted lid foam Watertight, crushproof, and dustproof Open cell core with solid wall design - strong, light weight Automatic Pressure Equalization Valve - balances interior pressure, keeps water out O-ring seal

Read more less

The Clear 24 Ltr from Really Useful is ideal for storing Foolscap, A4 or Lever Arch files and any stationary item that needs to be stored lengthways. The boxes can be stacked with or without lids due to having reinforced corners. Comes with a detachable lid with clip lock handles to keep your boxed items safe and secure. Manufactured in the UK from recyclable and translucent plastic. Dimensions: External: 465 x 270 x 290 Internal: 380 x 230 x 270 Weight: 1.37kg

Read more less

Stacking storage bin complete with lid & locking handles can be stacked with or without lid. Dimensions: 240mm Long x 130mm Wide x 125mm External 190mm x 100mm x 104mm Internal Suggested uses include: Photo storage, Postcard storage, Index cards, Stationery

Read more less

Really useful boxes are perfect for storing consumables, accessories and other equipment for transport to and from set. Additionally it can keep your camera truck organised. Suggested uses: A4 Files Lever Arch Files / Box Files Tarpaulin / Poly Bag Dimensions: External: 600 x 400 x 315 Internal: 530 x 325 x 289(length x width x depth in mm) Weight:  2,575g  

Read more less

Really useful boxes are perfect for storing consumables, accessories and other equipment for transport to and from set. Additionally it can keep your camera truck organised. Additional Suggested uses: Tape  Stationery supplies Dimensions: External: 340 x 200 x 125 Internal: 285 x 160 x 105(length x width x depth in mm) Weight: 540g  

Read more less

The TrekPak Pin Pack comes with 10 pins, plus red pull tabs, to allow you to easily connect your dividers together.

Read more less

The Peli 0340 is the smallest of the waterproof cube cases in the Peli Protector range. Features: • Automatic pressure equalisation valve • Double wide handles • Easy-open latches • Retractable handle • Rubber 'O-ring' seal • Stackable • Wheels • Stainless steel padlock hasps • IP67 rated protection Interior Dimension: 457 x 460 x 450 mm Exterior Dimension: 520 x 520 x 489 mm Weight: 10.89 kg

Read more less

Interior: 23.5 × 18.1 × 10.5 cm Pick N Pluck™ with convoluted lid foam Watertight, crushproof, and dustproof Open cell core with solid wall design - strong, light weight Easy open Double Throw latches Automatic Pressure Equalization Valve - balances interior pressure, keeps water out

Read more less

The 0370 Protector Case is the largest of the cube cases. The case is available with or without a foam set. Padded dividers and a lid organiser are also available separately. Features: • Automatic pressure equalisation valve • Double wide handles • Easy-open latches • Rubber 'O-ring' seal • Stackable • Stainless steel padlock hasps • IP67 rated protection Interior Dimension: 610 x 610 x 605 mm Exterior Dimension: 673 x 673 x 641 mm Weight: 14.5 kg

Read more less

The Peli 0350 is a large cube case, popular for storing high-spec drones as well as many other large, fragile or expensive pieces of equipment. Features: • Automatic pressure equalisation valve • Double wide handles • Easy-open latches • Rubber 'O-ring' seal • Stackable • Stainless steel padlock hasps • IP67 rated protection Interior Dimension: 507 x 510 x 498 mm Exterior Dimension: 571 x 569 x 540 mm Weight: 11.79 kg

Read more less

The iM3410 is a long, watertight case from the Peli Storm range. Features: • Lightweight HPX resin • Press & pull latches • Rubber overmoulded handles • Rubber 'O-ring' seal • Vortex® valve • Wheels • Stainless steel padlock hasps • IP67 rated protection Interior Dimension: 1384 x 254 x 152 mm Exterior Dimension: 1466 x 323 x 169 mm Weight: 7.4 kg

Read more less

The Peli iM3300 Storm case is a long, protective case with two soft-grip handles and in-line wheels for transporting. Features: • Lightweight HPX resin • Press & pull latches • Rubber overmoulded handles • Rubber 'O-ring' seal • Vortex® valve • Wheels • Plastic padlock hasps • IP67 rated protection Interior Dimension: 1282 x 355 x 152 mm Exterior Dimension: 1366 x 419 x 170 mm Weight: 8.66 kg

Read more less

This long case is suitable for protecting any kind of long equipment. The in-line wheels and soft-grip handles make it very easy to transport. Features: • Lightweight HPX resin • Press & pull latches • Rubber overmoulded handles • Rubber 'O-ring' seal • Vortex® valve • Wheels • 4 x Plastic padlock hasps • IP67 rated protection Interior Dimension: 1117 x 355 x 216 mm Exterior Dimension: 1198 x 419 x 234 mm Weight: 9.25 kg

Read more less

The iM3200 is a long Peli Storm military-spec protective case with wheels. It has two handles, enabling easy transportation. Features: • Lightweight HPX resin • Press & pull latches • Rubber overmoulded handles • Rubber 'O-ring' seal • Vortex® valve • Wheels • Plastic padlock hasps • IP67 rated protection Interior Dimension: 1117 x 355 x 152 mm Exterior Dimension: 1198 x 419 x 170 mm Weight: 8.03 kg

Read more less