THE SOLUTION FOR YOUR HANDHELD MIC IN HEAVY WINDS... • Fits all standard handheld microphones• For heavy wind• Stays in place on the microphone• Built with Imitation Fur• Reduces Wind Noise• Easy to Mount on Microphone• Designed in Denmark by sound lovers, for sound lovers The Big Windbubble provides some of the best wind protection for handheld microphones on the market. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside. So instead of the wind hammering on the microphone and making those horrible “ I’m in the middle of a hurricane”- sounds, it passes right through. The outside consists of carefully chosen black faux-fur that is soft, fluffy and even, and help make sure that you get the best possible results when recording outdoors.There is a smooth mesh lining underneath the fur and an elastic mount at the bottom, which makes it easy and secure to fit the Big Windbubble on all standard handheld microphones. Height: 10 cm (3.9”). Diameter: 5.2 cm (2.0”) Weight: 100g (incl. packaging) Long Haired Item code: BBI-BWB-BK Short Haired Item code: BBI-BWB-BKS

Read more less

The Windkiller SE (Special Edition) uses Bubblebees finest imitation fur to effectively protect your DPA 4018G or 4018E mic against wind noise. The outer layer of The Windkiller SE for DPA 4018G features a high-density, soft, multi-pile fur to gradually slow the wind down before reaching your mic. Inside, The Windkiller SE uses a super soft and smooth, open material. This allows your mic to sound as transparent as possible, whilst protecting your recordings against harmful wind noises. The black elastic band and press stud keeps The Windkiller SE firmly attached to your mic, whilst seamlessly blending into the windshield to remain discreet. When fitted correctly, The Windkiller SE holds a bubble of dead air around the front of the mic capsule, allowing the microphone to function as naturally as possible and keeping wind interference at bay. FEATURES: Designed to fit the DPA 4018G and DPA 4018E low profile supercardioid microphones. Uses the much-loved, multi-pile fur for the ultimate protection against wind noise. Transparent inner fabric maintains a very natural frequency response, on or off-axis. Manufactured in Denmark with quality and comfort in mind by sound lovers, for sound lovers. WHAT’S INCLUDED: 1 x The Windkiller SE for DPA 4018G  

Read more less

The Windkiller SE (Special Edition) uses Bubblebees finest imitation fur to effectively protect your DPA 4097 or 4099 mic against wind noise. On the outside, The Windkiller SE for DPA 4097 features a high-density, soft, multi-pile fur to gradually slow the wind down before reaching your mic. Inside, The Windkiller SE uses a soft and smooth, open material. This allows your mic to sound as transparent as possible, whilst protecting your recordings against harmful wind noises. The black elastic tab and press stud keeps The Windkiller SE firmly attached to your microphone, whilst seamlessly blending into the windshield to remain discreet. When fitted correctly, The Windkiller SE holds a bubble of dead air around the front of the mic capsule, allowing the microphone to function as naturally as possible and keeping wind interference at bay. FEATURES: Designed to fit the DPA 4097 Micro Shotgun and DPA 4099 Instrument microphones. Uses the much-loved, multi-pile fur for the ultimate protection against wind noise. Transparent inner fabric maintains a very natural frequency response, on or off-axis. Manufactured in Denmark with quality and comfort in mind by sound lovers, for sound lovers.

Read more less

The Regular Spares Set for The Lav Concealer contains 6 full sets of metalwork replacements for your regular 'square' format Lav Concealers; ie. Like the Lav Concealer for Cos-11, DPA 4060, 4071 or RØDE Lavalier, B3, MKE 2, W.Lav Pro, ECM-77 etc. A 'set' of metalwork consists of a Fabric Guard, Fabric Guard Extreme and a Clothing Clip. The Spares Set has 3 x silver sets (for white Lav Concealers) and 3 x black sets (for Black Lav Concealers), making 6 full sets in total.

Read more less

The Tiny Spares Set for The Lav Concealer contains 6 full sets of metalwork replacements for your tiny 'subminiature' format Lav Concealers; ie. Like the Lav Concealer for DPA 6060. MKE1, B6, W.Lav Micro A 'set' of metalwork consists of one big metal Fabric Guard, one small metal Fabric Guard and a metal Lock piece. The Spares Set has 3 x silver sets (for white Lav Concealers) and 3 x black sets (for Black Lav Concealers), making 6 sets (18pcs) in total.

Read more less

SPECIALLY DESIGNED DOUBLE-SIDED HYPOALLERGENIC TAPE FOR MOUNTING THE TINY Lav CONCEALERS TO CLOTHING OR DIRECTLY ON SKIN. The new tape features a small recessed area in the sticky tab, to prevent the build up of adhesive residue around your mics capsule. Similar in principle to existing Lav Concealer Tape, the new tiny version includes a handy thumb tab to help you affix the tape to the tiny Lav Concealers. The hypoallergenic tape itself is super sticky, allowing you to mount your tiny Lav Concealer on a number of different surfaces with the confidence that it will stay in place throughout your recording. To apply The Lav Concealer Tiny Tape, simply lift the tape from the backing tape using the thumb-tab. Then line up and press the glue-side firmly onto The Lav Concealer. Then, use the thumb-tab to remove the guard paper, leaving the double sided tape on the concealer. Fit directly to clothing, skin or other surfaces without worry! PERFECT FIT FOR: The Lav Concealer for DPA6060, Sennheiser MKE1, Countryman B6 and Deity W.Lav Micro.

Read more less

THE STICKIEST ONE YOU'LL FIND... Optimal for use under clothes Sticks directly on clothes and skin Tape. is allergy tested. Works perfectly with The Piece-A-Fur. 120 pieces of high quality tape. Designed in Denmark by sound lovers, for sound lovers. This product is for the individuals who have their own routines on how to mount Lavalier microphones and insist to use the best possible tape on the market. This double-sided tape is exactly the same tape that comes with our Invisible Lav Covers. The only difference is that you do not get any mesh fabric but instead a batch of 120 pieces of our best tape. The transparent double-sided tape keeps your microphone solid in place on one side and sticks directly to the skin or to clothes on the other side allowing the microphone to be safely and securely mounted almost anywhere. The tape also has a small piece cut out in the middle of the tape, which is to be saved and used for fixing. The tape must be replaced after each use. Since the Invisible Lav Tape package comes with 120 pieces of tape, you will be able to do 120 mounts per pack. Each piece of tape measures 2.2 cm x 2.2 cm (0.86” x 0.86”). Weight: 20g (incl. packaging)

Read more less