YOUR LAVALIER MIC'S BEST FRIEND ON WINDY DAYS The Bubblebee Windbubble consists of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing. And this 'nothing' is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside. So instead of the wind hammering on the microphone and making those horrible, “I’m in the middle of a hurricane,” sounds, the capsule is kept in a calm space and allowed to perform at its best. Each package contains two identical Windbubbles. WINDBUBBLE FEATURES: WORLD-RENOWNED PROTECTION FROM WINDBest in the industry wind protection thanks to the bubble-effect in the design. The construction of the Windbubble holds a quiet space around the mic capsule, allowing it to perform its duties in the best way possible and delivering detailed and natural sound to your transmitter or recorder. WINDBUBBLES WON'T FALL OFFThey are built to stay safe and secure on your Lavalier microphone, with a tight fitting opening aperture - hence the four available sizes.  CHOOSE YOUR SIZEAvailable in four different sizes for over 50 popular lavalier mics. Please consult our Size Guide to check this. CHOOSE YOUR COLOURAvailable in six different colours of high quality Bubblebee fur to make it easier to find a Windbubble for every occasion. NATURAL SOUNDOur fur and mesh construction makes The Windbubble acoustically transparent to keep the sound very close to the microphones natural frequency response. MULTI-PILE FURThe short, dense hair of the fur gives the Windbubble a rounded and organic shape while the longer fur slows wind down gradually for quieter wind protection. NATURAL COLOURSThe Bubblebee fur is less shiny to blend better with skin, clothes and other surrounding materials. QUALITY YOU CAN TRUSTDesigned in Denmark by sound lovers, for sound lovers! MOUNT THE WINDBUBBLE WITH CONFIDENCE The Windbubbles are specially constructed to be mounted quickly and easily on your specified type of microphones and to not fall off during use. To this end, the fit can be fairly tight around the base of the capsule. The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphone, by locating the hole easily. If the lav capsule is on the larger side, you can practise mounting the Windbubble on the tapered end of a ball-point pen as this helps get a feel for it. It is important that you check the correct size(s) suitable for your lavalier microphone. Please consult our Size Guide to check this. Size 1 - Built for microphones with a diameter of 3,0-4,0 mmElastic opening circumference: 28 mm (1.10”)For Example:Sanken COS-11 (without metal windscreen)Countryman B6, B2D, E6Sennheiser MKE 1Sony ECM-90DPA 6060 Size 2 - Built for microphones with a diameter of 5,0-8,0 mm:Elastic opening circumference: 35 mm (1.38”)For Example:Sanken COS-11 (without metal windscreen)Countryman B3DPA 4060Sennheiser MKE 2, ME2, ME2-US (without windscreen), ME2-IILOM Mikro Uši Size 3 - Built for microphones with a diameter of 5,0-9,0 mm:Elastic opening circumference: 40 mm (1.57”)For Example:Sanken COS-11 (with metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II Size 4 - Built for microphones with a diameter of 8,0-13,0 mm:Elastic opening circumference: 42 mm (1.65”)For Example:Sanken COS-11 (with large metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)LOM Uši Pro

Read more less

YOUR LAVALIER MIC'S BEST FRIEND ON WINDY DAYS The Bubblebee Windbubble consists of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing. And this 'nothing' is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside. So instead of the wind hammering on the microphone and making those horrible, “I’m in the middle of a hurricane,” sounds, the capsule is kept in a calm space and allowed to perform at its best. WINDBUBBLE FEATURES: WORLD-RENOWNED PROTECTION FROM WINDBest in the industry wind protection thanks to the bubble-effect in the design. The construction of the Windbubble holds a quiet space around the mic capsule, allowing it to perform its duties in the best way possible and delivering detailed and natural sound to your transmitter or recorder. WINDBUBBLES WON'T FALL OFFThey are built to stay safe and secure on your Lavalier microphone, with a tight fitting opening aperture - hence the four available sizes.  CHOOSE YOUR SIZEAvailable in four different sizes for over 50 popular lavalier mics. Please consult our Size Guide to check this. CHOOSE YOUR COLOURAvailable in six different colours of high quality Bubblebee fur to make it easier to find a Windbubble for every occasion. NATURAL SOUNDOur fur and mesh construction makes The Windbubble acoustically transparent to keep the sound very close to the microphones natural frequency response. MULTI-PILE FURThe short, dense hair of the fur gives the Windbubble a rounded and organic shape while the longer fur slows wind down gradually for quieter wind protection. NATURAL COLOURSThe Bubblebee fur is less shiny to blend better with skin, clothes and other surrounding materials. QUALITY YOU CAN TRUSTDesigned in Denmark by sound lovers, for sound lovers! MOUNT THE WINDBUBBLE WITH CONFIDENCE The Windbubbles are specially constructed to be mounted quickly and easily on your specified type of microphones and to not fall off during use. To this end, the fit can be fairly tight around the base of the capsule. The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphone, by locating the hole easily. If the lav capsule is on the larger side, you can practise mounting the Windbubble on the tapered end of a ball-point pen as this helps get a feel for it. WHAT'S INCLUDED: Each package contains 1x Windbubble It is important that you check the correct size(s) suitable for your lavalier microphone. Please consult our Size Guide to check this. Size 1 - Built for microphones with a diameter of 3,0-4,0 mmElastic opening circumference: 28 mm (1.10”)For Example: Sanken COS-11 (without metal windscreen)Countryman B6, B2D, E6Sennheiser MKE 1Sony ECM-90DPA 6060 Size 2 - Built for microphones with a diameter of 5,0-8,0 mm:Elastic opening circumference: 35 mm (1.38”)For Example: Sanken COS-11 (without metal windscreen)Countryman B3DPA 4060Sennheiser MKE 2, ME2, ME2-US (without windscreen), ME2-IILOM Mikro Uši Size 3 - Built for microphones with a diameter of 5,0-9,0 mm:Elastic opening circumference: 40 mm (1.57”)For Example: Sanken COS-11 (with metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II Size 4 - Built for microphones with a diameter of 8,0-13,0 mm:Elastic opening circumference: 42 mm (1.65”)For Example:Sanken COS-11 (with large metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)LOM Uši Pro

Read more less

FOR ULTIMATE TRANSPARENCY AND INVISIBILITY... The Invisible Lav Covers - Original allow you to easily mount and hide your lavalier microphones directly on the skin or on clothing, whilst protecting your audio against clothing rustle. Each package of The Invisible Lav Covers Big Bag - Original consists of 40 pieces of mesh fabric, each reusable 3-4 times, for at least 120 mounts (choose from black/beige/white). FEATURES: Optimal for use under clothing Provides you with ultimate transparency and invisibility when mounting your lavalier mics Available in black, beige or white Stick directly to the skin or clothing 40 pieces of reusable aerated mesh fabric Each piece can be used at least 3 times, giving you 120 mounts per bag Comes in a useful reusable zip-lock storage pouch Designed in Denmark by Sound Lovers, for Sound Lovers While the fabric can be used many times, you will be able to do a minimum of 120 mounts per pack. Use their transparent, double-sided Invisible Lav Tape (sold separately) to keep your microphone and Invisible Lav Cover firmly in place whilst sticking directly to the skin or to clothing allowing the microphone to be safely and securely mounted almost anywhere. It’s all about being creative: under the collar, next to a buttonhole, or under the clothing in the chest area. Not sure which colour to use? The Invisible Lav Covers - Original are also available in a smaller multipack, that also includes our Invisible Lav Tape. SPECIFICATIONS Each piece of fabric and tape measures 2.2 cm x 2.2 cm (0.86” x 0.86”), and comes in a handy reusable zip-lock storage pouch. Item codes: BBI-ILC-O-40BK/BE/WH Product warranty: This product is covered by their two-year warranty securing against defects in material, design and workmanship. The full-length warranty is available for download here. Also available: Invisible Lav Covers, Big Bag - Fur Outdoor: For ultimate wind protection and fabric noise reductionInvisible Lav Covers, Big Bag - Moleskin: For ultimate invisibility and fabric noise reduction

Read more less

THE INVISIBLE Lav COVERS FUR OUTDOOR THESE FUR PADS ELIMINATE RUSTLING AND WIND NOISES FROM YOUR Lav MIC The Invisible Lav Covers FUR OUTDOOR allow you to easily mount and hide your Lavalier microphones directly on the skin or on clothes.  Each package of Invisible Lav Covers FUR OUTDOOR consists of 9 pieces of fur fabric in 3 colors: Black, Beige and White together with 30 pieces of Bubblebee Industries’ high quality Invisible Lav Tape. FEATURES Designed to be Used Under Clothes Eliminate Rustling and Wind Noises Stick Directly to the Skin or Clothes Hypo Allergic / Allergy Tested 3 Black, 3 Beige and 3 White Reusable Fur Pads 30 Pieces of High Quality Tape Designed in Denmark by Sound Lovers, for Sound Lovers The transparent double-sided Invisible Lav Tape keeps your microphone and fur fabric solid in place on one side and sticks directly to the skin or to clothes on the other side allowing the microphone to be safely and securely mounted almost anywhere. It’s all about being creative: under the collar, next to a buttonhole, or under the clothes in the chest area. The tape also has a small piece cut out in the middle of the tape, which is to be saved and used for fixing. While the fur fabric can be used up to four times, the tape must be replaced after each use. Since the Invisible Lav Covers FUR OUTDOOR package comes with 30 pieces of tape, you will be able to do 30 mounts per pack.

Read more less

The Windbubble PRO microphone windshields will give you the ultimate wind protection you can get for you omni-directional lavalier, field recording or headset mic. Whatever the make or size of your mic, the Windbubble PRO range of premium quality furry windshields keeps away those horrible wind noises and allows the clean and clear frequencies in. The Windbubble PRO lav mic windshield consists of a soft rubber mount. Unlike hard plastic mounts this special rubber mount absorbs shocks and stops vibrations transferring to your mic’s capsule. The rubber mount holds the furry windshield firmly in place on your mic, making sure it doesn't slip off. In addition to this, the rubber mount has a slight conical shape inside, which ensures you can't push your microphone too far into the windshield. This is very important to ensure that your microphone has a "bubble" of dead-air around the capsule for optimal wind protection and audio clarity. This means that your mic will consistently stay in the best possible position for maximum efficiency. There are four sizes of rubber mounts available to fit the most commonly used omnidirectional lavalier mics, headset mics, or field recording stereo-pair microphones, this includes The Windbubble Pro (Twin pack) Large. The fixed positioning of the mic using the rubber mount has given us the ability to engineer a smaller overall profile for the Windbubble PRO without compromising on the efficacy of the wind protection. However, each mount size is also available in a larger 'Extreme' version which consists of an inner foam core, surrounded by our much-loved multi-pile faux fur, to offer you an even greater level of wind protection for your microphone. These are especially helpful on those super windy exteriors and a perfect solution for factual, ENG and broadcast shoots. Every Windbubble PRO is available in our renowned multi-pile faux fur. This unique fur has been specially designed with varying lengths of fur to help gradually slow down the wind particles before reaching the mic. The base of the fur has a higher density of shorter hairs and an acoustically transparent backing material for maximum frequency transparency. So instead of the wind hammering on the microphone and making those horrible, “I’m in the middle of a hurricane,” sounds, the capsule is kept in a calm bubble of wind protection and allowed to perform at its best. Each Windbubble PRO is available in a single or twin-pack of lapel mic windshields and in four different colours (black, grey, white, and beige) to allow you to colour-match to the costume or outfit of the talent. Please note: The Windbubble PRO is only suitable for omnidirectional microphones. If you have a directional microphone, then the original Windbubble is the best microphone windshield for your mic. WINDBUBBLE PRO FEATURES: WORLD-RENOWNED PROTECTION FROM WINDBest in the industry wind protection thanks to the bubble-effect and rubber mount in the design. The construction of the Windbubble PRO holds a quiet space of dead-air around the mic capsule, allowing it to perform the best way possible and delivering detailed and naturally transparent audio to your transmitter or recorder. WINDBUBBLE PROS WON'T FALL OFFThe rubber mount firmly grips your mic, ensuring the windshield will stay in place and you don't have to worry about it falling off mid-shoot. CHOOSE YOUR SIZE AND MODELThe Windbubble PROs are available in four different sizes to fit the most popular lavalier, head-worn or field recording mics. Each size is also available in a standard version or and 'Extreme' version for greater wind protection.  NATURAL SOUNDThe fur and mesh construction makes The Windbubble PRO acoustically transparent to keep the sound very close to the microphone’s natural frequency response. CHOOSE YOUR COLOURAvailable in four different colours (black, grey, white and beige) oh high quality Bubblebee faux fur to make it easier to match a Windbubble PRO colour to most outfits. MULTI-PILE FURThe short, dense hair of the fur gives the Windbubble PRO a rounded and organic shape while the longer fur slows wind down gradually for best-in-class wind protection. The Bubblebee fur is less shiny than others, to better blend with skin, clothes and other surrounding materials. QUALITY YOU CAN TRUSTDesigned in Denmark by sound lovers, for sound lovers! It is important that you check the correct size(s) Windbubble PRO windshield suitable for your omnidirectional lavalier microphone. Please consult the size guide below to check this. XS - Built for omni microphones with a diameter of 3.0-5.0mmFor Example: Countryman B3, B6, E6, H6Deity W.Lav Micro, W.Lav ProDPA 6060, 6061, 6066Sanken COS-11 (without metal popshield)Sennheiser HSP 2, MKE 1, MKE 2Sony ECM-88, ECM-90 Small - Built for omni microphones with a diameter of 5.0-6.5mm:For Example: Deity W.LavDPA 4060, 4061, 4062, 4063, 4066, 4071, 4166, 4266Røde Lavalier, Lavalier Go, SmartLav+ LINKLavSennheiser ME 2 (old style with removable popshield 5.8mm ø from G2/G3 series)Shure Duraplex DL4, DH5, Twinplex TL45, TL46, TL47, TL48Sony ECM-77 Medium - Built for omni microphones with a diameter of 6.0-8.0mm:For Example: LOM mikroUši, mikroUši ProSennheiser ME 2-US (old style with removable popshield 6.5mm ø from G3/G4 series)Sony ECM-V1Tascam TM-10LTentacle MIC-01 ITEM CODES:BBI-WP-XS-BK/WH/GY/BEBBI-WP-S-BK/WH/GY/BEBBI-WP-M-BK/WH/GY/BE BBI-WP-XS-BK/WH/GY/BE-EBBI-WP-S-BK/WH/GY/BE-EBBI-WP-M-BK/WH/GY/BE-E BBI-WP2-XS-BK/WH/GY/BEBBI-WP2-S-BK/WH/GY/BEBBI-WP2-M-BK/WH/GY/BE BBI-WP2-XS-BK/WH/GY/BE-EBBI-WP2-S-BK/WH/GY/BE-EBBI-WP2-M-BK/WH/GY/BE-E

Read more less

The Windbubble PRO microphone windshields will give you the ultimate wind protection you can get for you omni-directional lavalier, field recording or headset mic. Whatever the make or size of your mic, the Windbubble PRO range of premium quality furry windshields keeps away those horrible wind noises and allows the clean and clear frequencies in. The Windbubble PRO lav mic windshield consists of a soft rubber mount. Unlike hard plastic mounts this special rubber mount absorbs shocks and stops vibrations transferring to your mic’s capsule. The rubber mount holds the furry windshield firmly in place on your mic, making sure it doesn't slip off. In addition to this, the rubber mount has a slight conical shape inside, which ensures you can't push your microphone too far into the windshield. This is very important to ensure that your microphone has a "bubble" of dead-air around the capsule for optimal wind protection and audio clarity. This means that your mic will consistently stay in the best possible position for maximum efficiency. The fixed positioning of the mic using the rubber mount has given us the ability to engineer a smaller overall profile for the Windbubble PRO without compromising on the efficacy of the wind protection. However, each mount size is also available in a larger 'Extreme' version which consists of an inner foam core, surrounded by our much-loved multi-pile faux fur, to offer you an even greater level of wind protection for your microphone. These are especially helpful on those super windy exteriors and a perfect solution for factual, ENG and broadcast shoots. Every Windbubble PRO is available in our renowned multi-pile faux fur. This unique fur has been specially designed with varying lengths of fur to help gradually slow down the wind particles before reaching the mic. The base of the fur has a higher density of shorter hairs and an acoustically transparent backing material for maximum frequency transparency. So instead of the wind hammering on the microphone and making those horrible, “I’m in the middle of a hurricane,” sounds, the capsule is kept in a calm bubble of wind protection and allowed to perform at its best. The Windbubble PRO is also available in XS, Small and Medium, in a single or twin-pack of lapel mic windshields and in four different colours (black, grey, white, and beige) to allow you to colour-match to the costume or outfit of the talent. Please note: The Windbubble PRO is only suitable for omnidirectional microphones. If you have a directional microphone, then the original Windbubble is the best microphone windshield for your mic. WINDBUBBLE PRO FEATURES: WORLD-RENOWNED PROTECTION FROM WINDBest in the industry wind protection thanks to the bubble-effect and rubber mount in the design. The construction of the Windbubble PRO holds a quiet space of dead-air around the mic capsule, allowing it to perform the best way possible and delivering detailed and naturally transparent audio to your transmitter or recorder. WINDBUBBLE PROS WON'T FALL OFFThe rubber mount firmly grips your mic, ensuring the windshield will stay in place and you don't have to worry about it falling off mid-shoot. CHOOSE YOUR MODELThe Windbubble PROs are available in a standard version, 'Extreme' version for greater wind protection or 'Extreme' Long-Haired for those super windy conditions.  NATURAL SOUNDThe fur and mesh construction makes The Windbubble PRO acoustically transparent to keep the sound very close to the microphone’s natural frequency response. MULTI-PILE FURThe short, dense hair of the fur gives the Windbubble PRO a rounded and organic shape while the longer fur slows wind down gradually for best-in-class wind protection. The Bubblebee fur is less shiny than others, to better blend with skin, clothes and other surrounding materials. QUALITY YOU CAN TRUSTDesigned in Denmark by sound lovers, for sound lovers! It is important that you check the correct size(s) Windbubble PRO windshield suitable for your omnidirectional lavalier microphone. Please consult the size guide below to check this. Large - Built for omni microphones with a diameter of 11.5-14.0mmFor Example: LOM Uši, Uši ProMicBooster Clippy EM272 ITEM CODES:BBI-WP2-L-BKBBI-WP2-L-BK-EBBI-WP2-L-BK-EL

Read more less

The Bubblebee Microphone Accessory Case is a tough, protective microphone box with multiple compartments for accessories. Each compartment has a lid that keeps its contents safe and separated for easy access. The top of the Mic Accessory Case has the Bubblebee Logo imprinted with our slogan, "Making Sound Sound Better". Package contains two (2) Mic Accessory Cases. Pack contains 2 x strong ABS moulded cases Stainless steel reinforced hinge 5 Independant accessory compartments 1 large compartment for a lavalier microphone Transparent so you can see the contents "Making Sound Sound Better" printed on the front

Read more less

GET EVERYTHING YOU NEED IN THIS FUNDAMENTAL STARTER KIT FOR HIDING LAPEL AND LAVALIER MICROPHONES. In the world of sound production, audio recordings or video content creation, hiding mics can present many challenges, such as clothing rustle, wind, or cable noise. The Mic Hiding Starter Kit is tailored for all needs; offering a selection of essential tools to discreetly conceal the lavalier mic for clear and professional-sounding audio. With our kit, you can try before you buy, ensuring you find the perfect solution for your needs. Features: THE INVISIBLE LAV COVERS - FUR OUTDOORDesigned to be discreet yet powerful, our reusable faux Fur Outdoor covers are crafted for use under clothes, ensuring the elimination of rustling and wind noises for pristine audio recording. THE INVISIBLE LAV COVERS - ORIGINALCreated to keep an important space around your mic capsule for transparency and invisibility, our Original design facilitates easy mounting and discreet hiding of your Lavalier microphones directly on the skin or clothes. THE INVISIBLE LAV COVERS - MOLESKINOur Moleskin is crafted using an eco-friendly bamboo material to be a low-profile, allowing for the placement of lav mics on the skin or under clothes, effectively minimising friction noise whilst maintaining exceptionally discreet. THE INVISIBLE LAV TAPESticky double-sided hypoallergenic tape with a window to keep your mics capsule free from any glue residue. For use on its own or with all Invisible Lav Covers. THE INVISIBLE SKIN TAPEBreathable and sweat proof, this tape offers a discreet low-profile solution for effortlessly managing your lavalier microphone cable. The matte, skin-like finish facilitates seamless makeup application, allowing you to discreetly conceal your lapel mic cable in plain sight. THE MIC ACCESSORY CASEProviding an organised, protective and robust solution for keeping all your Mic Hiding Starter accessories together. The Mic Accessory Case includes 6 different compartments and transparent material ensures separation of accessories, allowing for effortless access. Whether you're a seasoned location sound recordist, videographer or content creator The Mic Hiding Starter Kit is the perfect accessory to help hide your lapel mic like a pro. WHAT'S INCLUDED:3 x FUR-OUTDOOR - Invisible Lav Covers (1 black, 1 white, 1 beige)2 x ORIGINAL - Invisible Lav Covers (1 black, 1 white, 1 beige)9 x MOLESKIN - Invisible Lav Covers (1 black, 1 white, 1 beige)15 x Invisible Lav Tape5 x Invisible Skin Tape1 x The Mic Accessory Case ITEM CODES:BBI-MHK-SK

Read more less

A WINDBUBBLE DREAM TEAM FOR YOUR CONVENIENCE...   Each package contains 1 black, 1 grey, 1 brown and 1 white Windbubble. The Windbubbles are build to stay safe and secure on the microphone, and therefore comes in four different sizes. The frequency through the Windbubble is very close to the microphones natural sound. The wind reduction is the best in the industry, thanks to the bubble-effect in the design. The fur is less shiny to blend better with skin, clothes and other surroundings. Designed in Denmark by sound lovers, for sound lovers. The Bubblebee Windbubbles consist of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing.  And this nothing is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside.  So instead of the wind hammering on the microphone and making those horrible "I’m in the middle of a hurricane"- sounds, it passes right through. The Windbubbles are specially constructed to be mounted quickly and easily on the specified types of microphone and to not fall off during use.  The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphones. CHOOSE THE CORRECT SIZE It is important that you check the correct size(s) suitable for your lavalier microphone. Please consult our Size Guide to check this. Size 1 - Built for microphones with a diameter of 3,0-4,0 mmElastic opening circumference: 28 mm (1.10”)For Example:Sanken COS-11 (without metal windscreen)Countryman B6, B2D, E6Sennheiser MKE 1Sony ECM-90DPA 6060 Size 2 - Built for microphones with a diameter of 5,0-8,0 mm:Elastic opening circumference: 35 mm (1.38”)For Example:Sanken COS-11 (without metal windscreen)Countryman B3DPA 4060Sennheiser MKE 2, ME2, ME2-US (without windscreen), ME2-IILOM Mikro Uši Size 3 - Built for microphones with a diameter of 5,0-9,0 mm:Elastic opening circumference: 40 mm (1.57”)For Example:Sanken COS-11 (with metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II Size 4 - Built for microphones with a diameter of 8,0-13,0 mm:Elastic opening circumference: 42 mm (1.65”)For Example:Sanken COS-11 (with large metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)LOM Uši Pro

Read more less

FOR ULTIMATE INVISIBILITY AND NOISE REDUCTION The Invisible Lav Covers - Moleskin offers a low-profile option to easily mount and hide your lavalier microphones directly on the skin or on clothes, drastically reducing friction noise whilst maintaining a high level of frequency transparency. The Invisible Lav Covers - Moleskin is made from sustainably sourced bamboo, making it significantly quieter and more eco-friendly compared to alternatives. Each package of Invisible Lav Covers - Moleskin consists of 10 black, 10 white, and 10 beige pieces of super-soft fabric and 30 pieces of our high-quality Invisible Lav Tape. FEATURES 30 pieces of (10x3) super soft, sustainably sourced fabric made from bamboo Low-profile, discreet design offers ultimate invisibility 3 colours for more mounting options 30 Pieces of high-quality hypoallergenic tape for easy fitting Stick directly to the skin or clothes Designed in Denmark by Sound Lovers, for Sound Lovers The transparent double-sided Invisible Lav Tape keeps your microphone and fabric solid in place on one side and sticks directly to the skin or to clothes on the other side allowing the microphone to be safely and securely mounted almost anywhere. The tape also has a small piece cut out in the middle of the tape, allowing your microphones capsule to remain free from a build up of sticky residue. SPECIFICATIONS Each piece of fabric and tape measures 2.2 cm x 2.2 cm (0.86” x 0.86”), and comes in a reusable cardboard package measuring 8 cm x 2.5 cm x 1.7 cm (3.1” x 0.9” x 0.6”). Weight: 10g (incl. packaging) Item code: BBI-ILC-M-30 Product warranty: This product is covered by their two-year warranty securing against defects in material, design and workmanship. The full-length warranty is available for download here.

Read more less

In the world of sound production, audio recordings or video content creation, hiding mics can present many challenges, such as clothing rustle, wind, or cable noise. The Mic Hiding Kit for Sennheiser ME 2-II is tailored for all needs; offering a selection of essential tools to discreetly conceal your Sennheiser ME 2-II lavalier mic for clear and professional-sounding audio. With this kit, you can try before you buy, ensuring you find the perfect solution for your needs. THE LAV CONCEALER FOR SENNHEISER ME 2-IIThis super soft, pliable mount is excellent at hiding your Sennheiser ME 2-II (Sennheiser G4, AVX, XSW-D or EW-D), whilst reducing any unwanted clothing noise and absorbing vibrations. It can be sewn, clipped on or taped to the talent or costume with the included accessories. The metal fabric guard ensures you keep an all-important space around the microphones capsule for optimal audio clarity, whilst the combination of the rubber and metal aides the reduction of vibration transference from the concealing layer of fabric to the microphone. This kit includes both black and white Lav Concealers for Sennheiser ME 2-II, allowing you to adapt the lapel mic mount to different costumes and fabrics.THE LAV CONCEALER TAPEDouble-sided hypoallergenic tape perfect for securely mounting The Lav Concealer to clothing or directly onto the skin. Ensuring reliable placement even where clips aren’t feasible, maintaining discreet microphone positioning. THE INVISIBLE SKIN TAPEBreathable and sweat proof, this tape offers a discreet low-profile solution for effortlessly managing your lavalier microphone cable. The matte, skin-like finish allows for easy makeup application, allowing you to discreetly conceal your lapel mic cable in plain sight. THE MIC ACCESSORY CASEProviding an organised, protective and robust solution for keeping all your Sennheiser ME 2-II Mic Hiding accessories together. The six different compartments and transparent material ensures separation of accessories, allowing for easy access. Please note that this is for the more recent ME 2-II (which now Sennheiser refer to as “ME 2”) mic which has a permanently affixed pop-shield.

Read more less

NEVER CHANGE A WINNING TEAM... Each package contains of 3 black, 2, white, 2 grey, 1 brown, 1 off-white and 1 beige Windbubble The Windbubbles are build to stay safe and secure on the microphone, and therefore comes in four different sizes. The frequency through the Windbubble is very close to the microphones natural sound. The wind reduction is the best in the industry, thanks to the bubble-effect in the design The short hair of the fur gives the Windbubble a more rounded and organic shape. The fur is less shiny to blend better with skin, clothes and other surroundings. Available in six different colours make is easier to find a Windbubble for every occasion. Designed in Denmark by sound lovers, for sound lovers. The Bubblebee Windbubbles consist of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing.  And this nothing is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside.  So instead of the wind hammering on the microphone and making those horrible “I’m in the middle of a hurricane”- sounds, it passes right through. The Windbubbles are specially constructed to be mounted quickly and easily on the specified types of microphone and to not fall off during use.  The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphones. It is important that you check the correct size(s) suitable for your lavalier microphone. Please consult our Size Guide to check this. Size 1 - Built for microphones with a diameter of 3,0-4,0 mmElastic opening circumference: 28 mm (1.10”)For Example:Sanken COS-11 (without metal windscreen)Countryman B6, B2D, E6Sennheiser MKE 1Sony ECM-90DPA 6060 Size 2 - Built for microphones with a diameter of 5,0-8,0 mm:Elastic opening circumference: 35 mm (1.38”)For Example:Sanken COS-11 (without metal windscreen)Countryman B3DPA 4060Sennheiser MKE 2, ME2, ME2-US (without windscreen), ME2-IILOM Mikro Uši Size 3 - Built for microphones with a diameter of 5,0-9,0 mm:Elastic opening circumference: 40 mm (1.57”)For Example:Sanken COS-11 (with metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II Size 4 - Built for microphones with a diameter of 8,0-13,0 mm:Elastic opening circumference: 42 mm (1.65”)For Example:Sanken COS-11 (with large metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)LOM Uši Pro

Read more less

DON'T UNDERESTIMATE AN OBVIOUS NAME... The Piece-A-Fur is probably one of the most important additions to your sound recording bag. The high-quality imitation fur is thick, soft and durable, made for sound with a porous back material to allow sound frequencies through and dense, soft fur to deaden friction and reduce wind noise. This combination of an open base material and dense, high-quality fur sets the Piece-A-Fur apart as a top-quality versatile material that can help improve your mounts and recordings greatly, helping you eliminate wind and friction noise to a high degree. PIECE-A-FUR FEATURES Cut the Piece-A-Fur into pieces as desired to make your own wind protection. Eliminate clothing/costume noise caused by friction by cutting and placing under or between the layers of fabric. Reduces friction noise remarkably when rubbed against clothing, hairy chests, skin etc. The base/backing material of the fur is specially selected to allow for better frequency transparency when used to protect the microphone capsule. The fur is specially selected for its high density to deaden friction/rubbing noise The Piece-A-Fur is less shiny or reflective than many other fur types to blend in better with skin, clothing or other surroundings. Soft, durable, comfortable and easy to work with. Can also be stitched into costumes to reduce noise caused by movement in tight areas of fabric. A wide range of colours to help the Piece-A-Fur blend in almost any situation. Designed in Denmark by sound lovers, for sound lovers. The Piece-A-Fur gives you the opportunity to play with a piece of the specially produced wind protection faux-fur yourself. It's lush. You simply cut out the Piece-a-Fur in the desired size and shape and use it when mounting a microphone. This might come in handy if you work with uneven or problematic surfaces like a hairy chest that creates friction noise when recording. The Piece-a-Fur comes in the following six colours:Grey, Black, Brown, White, Off-White and Beige and will partner up perfectly with their Invisible Lav Tape. WHAT YOU GET: A soft, durable piece of faux-fur in either black, brown, grey, beige, off-white or white Measurements:36 cm x 10 cm (14.1” x 4”). Weight: 15g (incl. packaging) Item code: BBI-PAF-BK/BR/BE/OW/WH/GY

Read more less

STICKINESS AND PERFORMANCE WORTH A GOLD MEDAL... Optimal for use under clothes Sticks directly on clothes and skin. Tape is allergy tested. 3x3 reusable fabric pieces. 30 pieces of high quality tape. Designed in Denmark by sound lovers, for sound lovers. The Invisible Lav Covers allow you to easily mount and hide your Lavalier microphones directly on the skin or on clothes. Each package of Invisible Lav Covers consists of 9 pieces of mesh fabric and 30 pieces of our high quality tape. The transparent double-sided tape keeps your microphone and mesh fabric solid in place on one side and sticks directly to the skin or to clothes on the other side allowing the microphone to be safely and securely mounted almost anywhere. It’s all about being creative: under the collar, next to a buttonhole or under the clothes in the chest area. The tape also has a small piece cut out in the middle of the tape, which is to be saved and used for fixing. While the fabric can be used up to four times, the tape must be replaced after each use. Since the Invisible Lav Covers package comes with 30 pieces of tape, you will be able to do 30 mounts per pack. Each piece of fabric and tape measures 2.2 cm x 2.2 cm (0.86” x 0.86”). It comes in a reusable cardboard package measuring 8 cm x 2.5 cm x 1.7 cm (3.1” x 0.9” x 0.6”). Weight: 10g (incl. packaging).

Read more less

The Microphone Foams for Lavalier Mics have been engineered with precision to provide your microphone with excellent protection from vocal plosives and light wind noise whilst retaining a high-level of acoustic transparency. By using a secure cross-section attachment system, the overall profile of the mic foam has been reduced to offer a more discreet solution to existing alternatives on the market. PREMIUM MATERIALS, DURABLE DESIGNCrafted using premium-quality materials, this lapel mic windscreen is constructed to be super effective at reducing unwanted noise, whilst simultaneously retaining the natural frequency response of your lavalier or headset mic. UNIVERSAL COMPATIBILITYAvailable in five different sizes, The Microphone Foam for Lavalier Mics have been manufactured to be compatible with the most prominently used lav, headset or earset microphones. SLEEK AND DISCREETSay goodbye to bulky and distracting foam windshields or pop-screens with The Microphone Foam for Lavalier Mics. Whether you're using a lapel microphone for interviews, on-location shoots, or a headset microphone during a broadcast, conference, or stage performance, our microphone foams provide a snug and secure fit, allowing you to focus on your content or performance without worrying about equipment issues. The Microphone Foams for Lavalier Mics are the perfect solution to help you make sound sound better and an essential microphone accessory for any audio professional, videographer, content creator, journalist, or broadcaster. FEATURES:Premium materials, crafted with performance and durability in mind.Universal compatibility to fit commonly used lavalier microphones.Sleek and discreet profile.Designed in Denmark by sound lovers, for sound lovers.

Read more less

We’ve all seen footage where the microphone picks up those horrible wind noises; it’s very distracting and can ruin the video. The Outdoor Mic Kit for Røde Lavalier will make this a thing of the past; carefully curated to help you make sound sound better. This is the perfect accessory kit for use with the Røde Lavalier, Røde Lavalier Go, Røde SmartLav+ or RødeLINK lav microphones. THE WINDBUBBLEDelivering exceptional wind protection for your lav mic, ensuring clear and natural sound even in windy conditions. Its innovative design features multi-pile imitation fur and a unique core, creating a bubble of dead air around your microphone for optimal clarity. THE MICROPHONE FOAMS FOR LAVALIER MICSOffering excellent protection against vocal plosives and light wind noise while maintaining acoustic transparency. Designed with a secure cross section attachment system to provide a discreet solution for any lapel mic setup for any scenario. THE CABLE SAVERAdd strain relief and eliminating unwanted cable noise from your lav mic at the same time. Save your cable from breaking at the combiner by adding elasticity to your microphone cable. THE MIC ACESSORY CASEProviding an organised, protective and robust solution for keeping all your microphone accessories together. The 6 different compartments and transparent material ensures separation of accessories, allowing for quick and simply access and organisation. WHAT’S INCLUDED:1 x The Windbubble - Size L032 x The Microphone Foams for Lavalier - Medium1 x The Cable Saver1 x The Mic Accessory Case

Read more less

We’ve all seen footage where the microphone picks up those horrible wind noises; it’s very distracting and can ruin the video. The Outdoor Mic Kit for Sennheiser for ME 2-II will make this a thing of the past; carefully assembled to help you make sound sound better.This is the perfect accessory kit for use with the included microphone with selected Sennheiser Evolution Wireless G4, Sennheiser AVX, Sennheiser XSW-D and Sennheiser Evolution Wireless Digital wireless microphone packages. THE WINDBUBBLEDelivering exceptional wind protection for your lav mic, ensuring clear and natural sound even in windy conditions. Its innovative design features multi-pile imitation fur and a unique core, creating a bubble of dead air around your microphone for optimal clarity. THE MICROPHONE FOAMS FOR LAVALIER MICSOffering excellent protection against vocal plosives and light wind noise while maintaining acoustic transparency. Designed with a secure cross section attachment system to provide a discreet solution for any lapel mic setup for any scenario. THE CABLE SAVERAdd strain relief and eliminating unwanted cable noise from your lav mic at the same time. Save your cable from breaking at the combiner by adding elasticity to your microphone cable. THE MIC ACESSORY CASEProviding an organised, protective and robust solution for keeping all your microphone accessories together. The 6 different compartments and transparent material ensures separation of accessories, allowing for quick and simply access and organisation. WHAT’S INCLUDED:1 x The Windbubble - Size L042 x The Microphone Foams for Lavalier - XL1 x The Cable Saver1 x The Mic Accessory Case

Read more less

In the world of sound production, audio recordings or video content creation, hiding mics can present many challenges, such as clothing rustle, wind, or cable noise. The Mic Hiding Kit is tailored for all needs; offering a selection of essential tools to discreetly conceal your Røde lapel mic for clear and professional-sounding audio. With this kit, you can try before you buy, ensuring you find the perfect solution for your needs. The Mic Hiding Kit for Røde Lavalier has many tools carefully designed for help you make sound sound better. THE LAV CONCEALER FOR RØDE LAVALIERThis super soft, pliable mount is excellent at hiding your Røde Lavalier, Røde Smartlav+, RødeLINK lav or Røde Lavalier Go mic, whilst reducing any unwanted clothing noise and absorbing vibrations. It can be sewn, clipped or taped to the talent or costume with the included accessories. The metal fabric guard ensures you keep an all-important space around the microphones capsule for optimal audio clarity, whilst the combination of the rubber and metal aides the reduction of vibration transference from the concealing layer of fabric to the microphone. THE LAV CONCEALER TAPEDouble-sided hypoallergenic tape perfect for securely mounting The Lav Concealer to clothing or directly onto the skin. Ensuring reliable placement even where clips aren’t feasible, maintaining discreet microphone positioning. THE INVISIBLE LAV COVERS – FUR OUTDOORDesigned to be discreet yet effective, our reusable faux Fur Outdoor covers are designed for use under clothes, ensuring the elimination of rustling and wind noises for clean audio recordings. THE INVISIBLE LAV COVERS – MOLESKINCrafted using an eco-friendly bamboo material, allowing for the placement of lav mics on the skin or under clothes, effectively minimising friction noise whilst maintaining exceptionally discreet. THE INVISIBLE LAV TAPESticky double-sided hypoallergenic tape with a window to keep your mics capsule free from any glue residue. For use on its own or with all Invisible Lav Covers. THE INVISIBLE SKIN TAPEBreathable and sweat proof, this tape offers a discreet low-profile solution for effortlessly managing your lavalier microphone cable. The matte, skin-like finish allows for easy makeup application, allowing you to discreetly conceal your lapel mic cable in plain sight. THE MIC ACCESSORY CASEProviding an organised, protective and robust solution for keeping all your Røde Lavalier Mic Hiding accessories together. The six different compartments and transparent material ensures separation of accessories, allowing for easy access. WHAT’S INCLUDED:1 x Lav Concealer for Røde Lavalier6 x Lav Concealer Tape3 x FUR-OUTDOOR – Invisible Lav Covers6 x MOLESKIN – Invisible Lav Covers9 x Invisible Lav Tape5 x Invisible Skin Tape1 x The Mic Accessory Case

Read more less

FOR ULTIMATE INVISIBILITY AND NOISE REDUCTION... The Invisible Lav Covers - Moleskin offers a low-profile option to easily mount and hide your lavalier microphones directly on the skin or on clothing, drastically reducing friction noise whilst maintaining a high level of frequency transparency. The Invisible Lav Covers - Moleskin is made from sustainably sourced bamboo, making it significantly quieter and more eco-friendly compared to alternatives. Each package of The Invisible Lav Covers Big Bag - Moleskin consists of 120 pieces of moleskin squares in one colour (choose from black/beige/white). FEATURES Optimal for use under clothing Provides you ultimate noise reduction when mounting your lavalier mics Available in black, beige or white Stick directly to the skin or clothing 120 pieces of super soft, sustainably sourced fabric made from bamboo fibers Low-profile, discreet design offers ultimate invisibility Comes in a useful reusable zip-lock storage pouch Designed in Denmark by Sound Lovers, for Sound Lovers Moleskin pieces can be used 1-2 times, so you will be able to do a minimum of 120 mounts per pack. Use their transparent, double-sided Invisible Lav Tape (sold separately) to keep your microphone and Invisible Lav Cover firmly in place whilst sticking directly to the skin or to clothing allowing the microphone to be safely and securely mounted almost anywhere. It’s all about being creative: under the collar, next to a buttonhole, or under the clothing in the chest area. Not sure which colour to use? The Invisible Lav Covers - Moleskin are also available in a smaller multipack, that also includes their Invisible Lav Tape. SPECIFICATIONS Each piece of moleskin measures 2.2 cm x 2.2 cm (0.86” x 0.86”) and comes in a handy reusable zip-lock storage pouch. Item codes: BBI-ILC-M-120BK/BE/WH Product warranty: This product is covered by their two-year warranty securing against defects in material, design and workmanship. The full-length warranty is available for download here. Also available: Invisible Lav Covers, Big Bag - Original: For ultimate transparency and invisibilityInvisible Lav Covers, Big Bag - Fur Outdoor: For ultimate wind protection and fabric noise reduction

Read more less

The Invisible Lav Covers - Fur Outdoor allow you to easily mount and hide your lavalier microphones directly on the skin or on clothing, whilst protecting your audio against clothing rustle. Each package of The Invisible Lav Covers Big Bag - Fur Outdoor consists of 40 pieces of fur squares, each reusable 3-4 times, for at least 120 mounts (choose from black/beige/white). Features: Optimal for use under clothing Provides you with ultimate transparency and invisibility when mounting your lavalier mics Available in black, beige or white Stick directly to the skin or clothing 40 pieces of reusable fur squares Each piece can be used 3-4 times, giving you at least 120 mounts per bag Comes in a useful reusable zip-lock storage pouch Designed in Denmark by Sound Lovers, for Sound Lovers While the fur can be used many times, you will be able to do a minimum of 120 mounts per pack. Use the transparent, double-sided Invisible Lav Tape (sold separately) to keep your microphone and Invisible Lav Cover firmly in place whilst sticking directly to the skin or to clothing allowing the microphone to be safely and securely mounted almost anywhere. It’s all about being creative: under the collar, next to a buttonhole, or under the clothing in the chest area. Not sure which colour to use? The Invisible Lav Covers - Fur Outdoor are also available in a smaller multipack, that also includes our, that also includes our Invisible Lav Tape

Read more less

THE STICKIEST ONE YOU'LL FIND... Optimal for use under clothes Sticks directly on clothes and skin Tape. is allergy tested. Works perfectly with The Piece-A-Fur. 120 pieces of high quality tape. Designed in Denmark by sound lovers, for sound lovers. This product is for the individuals who have their own routines on how to mount Lavalier microphones and insist to use the best possible tape on the market. This double-sided tape is exactly the same tape that comes with our Invisible Lav Covers. The only difference is that you do not get any mesh fabric but instead a batch of 120 pieces of our best tape. The transparent double-sided tape keeps your microphone solid in place on one side and sticks directly to the skin or to clothes on the other side allowing the microphone to be safely and securely mounted almost anywhere. The tape also has a small piece cut out in the middle of the tape, which is to be saved and used for fixing. The tape must be replaced after each use. Since the Invisible Lav Tape package comes with 120 pieces of tape, you will be able to do 120 mounts per pack. Each piece of tape measures 2.2 cm x 2.2 cm (0.86” x 0.86”). Weight: 20g (incl. packaging)

Read more less