These cases are designed rugged, and travel the harshest environments on earth.
Against the extreme cold of the arctic or the heat of battle, Peli cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
FEAURES:
Interior: 21.1 × 14.7 × 9.5 cm
Pick N Pluck™ with convoluted lid foam
Watertight, crushproof, and dustproof
Open cell core with solid wall design - strong, light weight
Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
O-ring seal
Gripsticks Laminate Resin Sticks
Gripsticks is has Patented Hexatite Technology design, enabling you to secure your acrylic board slate into the sticks in seconds. It comes in standard Colour Bars and Grey Scale laminate design. The system utilises 1.5mm Hex grub screws with nylon tipped ends for a tighter and more secure hold. Finger-Tight controlled turning of the grub screws ensures a firm hold and releasing the slate is just as simple through unscrewing. Small 1.5mm Hex key supplied with all Gripsticks.
Available in 2 Sizes (width to match board):
Small - 190mm
Medium - 280mm (Standard size)
*This is for Clapper sticks only, the board is sold separately or both can be bought together as a set.
aka, all weather sticks, all weather clappersticks, all weather clapperboard, resin clappersticks
The URSA Waist Strap Sideways Pouch (URSA Waist Side) is designed to hide small transmitters discreetly under tight costumes. By rigging the transmitter and antenna sideways, artists gain more movement without the antenna pressing into the skin.
The strap sits lower on the waist, making it easier to conceal under trousers – which helps hold it in place and reduces transmitter visibility. The pouch is sewn externally, allowing the antenna to bend smoothly around the body using URSA's unique Antenna Pouch.
Key Features
At 8cm tall, this is URSA's slimmest strap yet.
Transmitter pouch measures 8cm x 11cm, fitting both large and small transmitters – from an A20 to a Lectrosonics SSM.
Sideways rig gives performers more freedom of movement.
Available in three sizes (S, M & L) and three colours (Beige, Black & Caramel).
The URSA Popper Pouch is a versatile and discreet solution for rigging transmitters. Its triple-popper design allows horizontal and vertical rigging — simply pop it on and you're ready to go.
It is ideal for bras, belts (without undoing them), car handles (no cable ties required), magic arms, X-Straps and more. Whether on set, performing live or working on location, it offers a comfortable and secure way to keep transmitters firmly in place.
Key Features
Triple-popper loop rigs horizontally or vertically without undoing belts or reaching for cable ties.
Accommodates transmitters from the Lectrosonics SSM up to the Sennheiser G4 & Sound Devices A20.
Available in four sizes (Mini, Small, Medium & Large) and two colours (Black & Beige).
Your 3rd Skin.
A raw grit workman's glove. Specially selected, double-layered goat skin hide creates an exceptional defence for the palm of your hands. A one-piece palm base combines with an articulated second layer to allow optimum freedom of movement as you work. Dirty Rigger select leather delivers a natural ability to resist friction, providing a barrier for your hands when working with rope, cables and staging. A lighter back on the glove minimises heat build-up and helps maintain a comfortable flow of air as you work.
Genuine leather palm
Ultra-durable, double-layered leather palm
Articulated second layer for freedom of movement (palm side)
Double stitched seams
Breathable glove back to relieve heat
Snug fit to minimise snagging
Write-on ID tag
This glove is currently undergoing PPE testing and should be considered suitable for general use in the meantime. For specific PPE requirements please refer to our specialised PPE range.
The workhorse of a camera we all know and love but this time it is reimagined as an enamel pin.
Pin Details:
Soft Enamel
1.5" Gold plated metal with two metal locking backs
Who said you can't pin up your memories! The Memory Card pin is the same size as a real SD card!
Pin details:
Soft enamel
1.2" Black nickel plated metal with two metal locking backs
Showing the sound department some love with the microphone, reimagined into an enamel pin.
Pin details:
Soft enamel
1.75" Nickel plated metal with two metal locking backs
The beloved 16mm film camera we all know and love. A true classic built to last.
Pin details:
Soft enamel
1.4" Nickel plated metal with two metal locking backs
Great Scott! Taking it back to the home video days with our 80s VHS Camera!
Pin details:
Soft enamel
1.75" Nickel plated metal with two metal locking backs
An homage to the critical tool that keeps the camera gear, lenses, and essentials organized.
Pin Details:
Soft Enamel
1.6" Nickel plated metal with two metal locking backs
This 4 socket extension lead by Masterplug with a 2m cable and wall-fixing capability is designed to meet modern standards. Its shuttered sockets allow you to extend your power source safely preventing accidental contact ensuring a power solution that promises both safety and functionality.
Plugs into Super Clamp 035 for lighting fixtures, Grip Heads or connect 2 Super Clamps 035 with 360 degree rotating capability.
Specification:
Weight 54 g
Attachment (bottom) 16mm Hexgon stud [Super Clamp AR]
Top Attachment 5/8" (16mm) stud
Colour Grey
Superclamp Compatible Yes
Material Aluminium
Pukka Pad Jotta notebooks are great for taking notes on the go and in traditional working environments.
Each individual notebook has 200 pages of quality, 80gsm paper with 8mm ruled lines and perforated pages for easy removal.
The notebook pages are feint ruled and have a margin, ensuring your notes are neat. The wirebound design allows pages to fold back and lay flat for ease of use.
Features:
Size: A6 160x120mm
200 Pages
80gsm Premium quality paper
Perforated pages for easy removal
Four-hole punched for easy filing
FSC certified
Edding's 750 permanent paint marker is the premium solution for marks even visible on dark materials. Regardless of surface - whether smooth glass, rough iron, or polished lacquering - you can mark it all.
With its highly opaque lacquer-like ink it specialises in labelling many kind of materials, even dark ones, making it a versatile marker not only for DIY enthusiasts.
Description:
Paint marker for highly opaque and permanent labelling even on dark and transparent materials, e.g. metal, glass and plastic
The round nib has a stroke width of 2-4 mm
The paint-like ink is quick-drying, weatherproof, extremely lightfast and wear-resistant
All colours are heat-resistant up to 400 °C
The colours remain visible at up to 1000 °C
The colour white is recommended by Lufthansa Technik
Suitable spare nibs (edding 750 spare nibs) are available
Low-odour ink with no added toluene/xylene
High-quality aluminium barrel
Benefits:
Long-lasting indoors and outdoors
Visible marking even in compromised lighting conditions
Foil seal ensures the product is unused when purchased
Intensive colour
High-quality brand product
How To Use:
Shake the marker with the cap on
Remove the cap
Pump the marker with the nib downwards on e.g. a piece of scrap paper
Carefully pump it up and down until ink fills the nib
The marker is now ready to use
Store horizontally
Protect your multi-tool with these Nylon Sheaths. Every detail has been thought through to ensure these Sheaths are long-lasting, dependable, and easy to use. A high-grade metal rivet snap closes tightly and keeps your tool secure. They're made out of durable, ballistic nylon and elastic with reinforced stitching for improved accessibility and fit.
Size Guide
Large: ARC, Signal, Super Tool 300, Super Tool 300 EOD, Super Tool 300M, Surge
This Edding 8280 UV Marker is ideal for labelling and creating hidden markings or secret messages on surfaces like wood, glass, metal and plastic, The ink can only be seen under UV light and is also waterproof and wear-resistant with a quick drying time.
Securitas UV marker for hidden marking and labelling of almost all materials
Permanent, quick-drying ink that only becomes clearly visible under UV light
High-quality aluminium barrel
The round nib has a stroke width of 1.5-3 mm
Smudge-proof
Waterproof
Low odour
The Microphone Foams for Lavalier Mics have been engineered with precision to provide your microphone with excellent protection from vocal plosives and light wind noise whilst retaining a high-level of acoustic transparency.
By using a secure cross-section attachment system, the overall profile of the mic foam has been reduced to offer a more discreet solution to existing alternatives on the market.
PREMIUM MATERIALS, DURABLE DESIGNCrafted using premium-quality materials, this lapel mic windscreen is constructed to be super effective at reducing unwanted noise, whilst simultaneously retaining the natural frequency response of your lavalier or headset mic.
UNIVERSAL COMPATIBILITYAvailable in five different sizes, The Microphone Foam for Lavalier Mics have been manufactured to be compatible with the most prominently used lav, headset or earset microphones.
SLEEK AND DISCREETSay goodbye to bulky and distracting foam windshields or pop-screens with The Microphone Foam for Lavalier Mics. Whether you're using a lapel microphone for interviews, on-location shoots, or a headset microphone during a broadcast, conference, or stage performance, our microphone foams provide a snug and secure fit, allowing you to focus on your content or performance without worrying about equipment issues.
The Microphone Foams for Lavalier Mics are the perfect solution to help you make sound sound better and an essential microphone accessory for any audio professional, videographer, content creator, journalist, or broadcaster.
FEATURES:Premium materials, crafted with performance and durability in mind.Universal compatibility to fit commonly used lavalier microphones.Sleek and discreet profile.Designed in Denmark by sound lovers, for sound lovers.
In the world of sound production, audio recordings or video content creation, hiding mics can present many challenges, such as clothing rustle, wind, or cable noise. The Mic Hiding Kit is tailored for all needs; offering a selection of essential tools to discreetly conceal your Røde lapel mic for clear and professional-sounding audio. With this kit, you can try before you buy, ensuring you find the perfect solution for your needs.
The Mic Hiding Kit for Røde Lavalier has many tools carefully designed for help you make sound sound better.
THE LAV CONCEALER FOR RØDE LAVALIERThis super soft, pliable mount is excellent at hiding your Røde Lavalier, Røde Smartlav+, RødeLINK lav or Røde Lavalier Go mic, whilst reducing any unwanted clothing noise and absorbing vibrations. It can be sewn, clipped or taped to the talent or costume with the included accessories.
The metal fabric guard ensures you keep an all-important space around the microphones capsule for optimal audio clarity, whilst the combination of the rubber and metal aides the reduction of vibration transference from the concealing layer of fabric to the microphone.
THE LAV CONCEALER TAPEDouble-sided hypoallergenic tape perfect for securely mounting The Lav Concealer to clothing or directly onto the skin. Ensuring reliable placement even where clips aren’t feasible, maintaining discreet microphone positioning.
THE INVISIBLE LAV COVERS – FUR OUTDOORDesigned to be discreet yet effective, our reusable faux Fur Outdoor covers are designed for use under clothes, ensuring the elimination of rustling and wind noises for clean audio recordings.
THE INVISIBLE LAV COVERS – MOLESKINCrafted using an eco-friendly bamboo material, allowing for the placement of lav mics on the skin or under clothes, effectively minimising friction noise whilst maintaining exceptionally discreet.
THE INVISIBLE LAV TAPESticky double-sided hypoallergenic tape with a window to keep your mics capsule free from any glue residue. For use on its own or with all Invisible Lav Covers.
THE INVISIBLE SKIN TAPEBreathable and sweat proof, this tape offers a discreet low-profile solution for effortlessly managing your lavalier microphone cable. The matte, skin-like finish allows for easy makeup application, allowing you to discreetly conceal your lapel mic cable in plain sight.
THE MIC ACCESSORY CASEProviding an organised, protective and robust solution for keeping all your Røde Lavalier Mic Hiding accessories together. The six different compartments and transparent material ensures separation of accessories, allowing for easy access.
WHAT’S INCLUDED:1 x Lav Concealer for Røde Lavalier6 x Lav Concealer Tape3 x FUR-OUTDOOR – Invisible Lav Covers6 x MOLESKIN – Invisible Lav Covers9 x Invisible Lav Tape5 x Invisible Skin Tape1 x The Mic Accessory Case
