The Round Eartip for The Sidekick in-ear monitor offers comfortable all-day wearablility and medium ambience of your environment, while still having crystal clear comms delivered to left, right or both ears. The Sidekick features the world’s first micro speaker solution for wireless receivers where the entire driver fits comfortably inside the ear. This means practically invisible, crystal-clear cues and comms, even in noisy environments. The Round Eartip offers medium environmental ambience, while still monitoring clear comms. WHAT'S INCLUDED 10 x The Round Eartip for The Sidekick In-Ear MonitorEither Small or Medium fit.

Read more less

These Energizer LR44/A76 Alkaline Batteries come in a sealed pack of 4 76 LR44 1.5V zero-mercury miniature batteries, Regularly used in the home and workplace but also effective for blood pressure monitors, remotes, keyless entry systems, glucose monitors, toys, and games. These packs can hold up power to three years in storage so is ready to go when needed. Long Lasting Trusted Power Reliable Alkaline 4 pack Dimensions:  Cell size: LR44/A76; Type: alkaline coin; volt: 1 5

Read more less

The BST-BNC 6 is a Boot for use with the rear twist BNC 75R connectors.

Read more less

Save money and lower your carbon footprint with Varta’s Accu rechargeable AAA batteries. These high-quality NiMH cells are economical, eco-friendly and are an excellent choice for high-demand applications like cameras and photo strobes. State-of-the-art NiMH technology delivers a battery with the highest possible capacity in a pre-charged cell. These rechargeable batteries also have a very low self-discharge rate, enabling them to retain up to 70% of their charge after 2 full years in storage. Unlike NiCd batteries, these cells don’t exhibit memory effects, so you can recharge them at any stage. No special charger is required; any standard NiMH charger will work. This economical pack contains 4 rechargeable AAA batteries.

Read more less

Helps create a barrier that can withstand moisture, UV and temperature changes. Strong reinforced backing: Offers incredible strength and toughness. Grips rough, smooth uneven surfaces. Fix, Patch, Seal, Hold, Protect, Repair, Create & Reinforce.

Read more less

URSA Pouch Protector for Securing Transmitters Lock your transmitters in place with our low-profile Pouch Protectors. Designed to be soft against the skin. Only 1mm thick! Simply fold the Pouch Protector over the pouch and it velcros onto each side of the strap to tightly secure the transmitter in place. Particularly useful for talent that does stunts or dance, where the transmitter has a chance it could slide, fall or be pushed out of the pouch. Features Designed to be soft against the skin Low profile: Only 1mm thick Sold as packs of 4 Available in Black or Beige

Read more less

URSA Head Strap, Designed for Motion Capture Artists and Puppeteers. This strap allows you to securely rig one or more microphones to the centre of the forehead, you can also rig headphones and attach velcro markers to the exterior of the strap. Each strap features a Hypoallergenic polyurethane gripper to ensure it stays firmly in place whilst remaining comfortable to wear. Head Straps were designed originally for Production Sound Mixer Simon Hayes for use on the film CATS to capture live vocals from the motion capture performances. Available now in Black & Beige Adjustable Velcro Straps One Size Fits All Machine Washable with detergent at 40 Degrees. Hang dry or Tumble Dry. URSA Straps use certified OEKO-TEX hypoallergenic fabric and gripper.

Read more less

THE ANSWER TO YOUR PRAYERS IN COMPACT WIND PROTECTION...  Made for your boom or camera microphone. Handles medium to mild wind. Made from the best imitation fur (high amount of hair pieces per cm2) which allows for optimal wind protection versus frequency transparency. Specially designed rubber base for super easy and secure mounting. When wet, simply dry it up and shake the fur back into a perfect shape.  Designed in Denmark by sound lovers, for sound lovers.  The Windkiller is a short-haired wind protector that fits shotgun microphones from Audio-Technica, Audix, DPA, JVC, Neumann, Røde, Sanken, Schoeps, Sennheiser, Sony and others. See Chart. The core of the Windkiller consists of high quality coarse foam with Bubblebee’s carefully chosen soft and fluffy imitation fur on top. This faux-fur is highly durable, works excellent to block the wind and is aesthetically pleasing for the eye. In the bottom, The Windkiller is constructed with our specially designed rubber mount that grips unto your microphone while still making it perfectly easy to slide the Windkiller on and off. The Windkiller comes in five different sizes, from XS to XL, all with an rubber opening in the bottom that fits shotgun microphones with a diameter of 18-24 mm (0.7”-0.9”). THE BIG MOUNT These come in XS and XL sizes with a rubber opening in the bottom that fits microphones with a wider diameter of 23-26 mm (0.9"-1,02"). There is 5 sizes and two big mount versions to cover all major variants of shotgun microphone: Big Mount:

Read more less

The Spacer Bubble, is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions. The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A short-haired fur cover is available separately if you need it. The Spacer Bubble is available in red, black, green and blue. FEATURES: Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh' and wind. Specially designed rubber base for super easy and secure mounting. Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible. Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection. Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally. Available in seven different sizes - to ensure you find a size that perfectly fits your favourite shotgun mic. Save valuable time while getting the best quality. Practical mesh bag included for easy storage and fast mounting. Designed in Denmark by sound lovers, for sound lovers. The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom. The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds. When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready! The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you're working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency. WHAT’S INCLUDED: 1x The Spacer Bubble 1x The Long-Haired Spacer Cover 1x Mesh Storage Bag   WHICH SPACER BUBBLE SIZE?We offer five different lengths and two different mount sizes: Weight XS:Mesh base: 40g (1,4oz)Long-haired slip on fur: 20g (0,7oz) Full weight w/ packaging: 260g (9,1oz) Weight S:Mesh base: 50g (1,7oz)Long-haired slip on fur: 25g (0,8oz)Full weight w/ packaging: 275g (9,7oz)   Weight M:Mesh base: 55g (1,9oz) Long-haired slip on fur: 30g (1oz)Full weight w/ packaging: 290g (10,2oz) Weight L:Mesh base: 60g (2,1oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 300g (10,5oz) Weight XL:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging:305g (10,7oz) Big Mount: Weight XS Big Mount:Mesh base: 40g (1,4oz) Long-haired slip on fur: 20g (0,7oz)Full weight w/ packaging: 260g (9,1oz) Weight XL Big Mount:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 305g1 (0,7oz)

Read more less

The Invisible Lav Covers - Fur Outdoor allow you to easily mount and hide your lavalier microphones directly on the skin or on clothing, whilst protecting your audio against clothing rustle. Each package of The Invisible Lav Covers Big Bag - Fur Outdoor consists of 40 pieces of fur squares, each reusable 3-4 times, for at least 120 mounts (choose from black/beige/white). Features: Optimal for use under clothing Provides you with ultimate transparency and invisibility when mounting your lavalier mics Available in black, beige or white Stick directly to the skin or clothing 40 pieces of reusable fur squares Each piece can be used 3-4 times, giving you at least 120 mounts per bag Comes in a useful reusable zip-lock storage pouch Designed in Denmark by Sound Lovers, for Sound Lovers While the fur can be used many times, you will be able to do a minimum of 120 mounts per pack. Use the transparent, double-sided Invisible Lav Tape (sold separately) to keep your microphone and Invisible Lav Cover firmly in place whilst sticking directly to the skin or to clothing allowing the microphone to be safely and securely mounted almost anywhere. It’s all about being creative: under the collar, next to a buttonhole, or under the clothing in the chest area. Not sure which colour to use? The Invisible Lav Covers - Fur Outdoor are also available in a smaller multipack, that also includes our, that also includes our Invisible Lav Tape

Read more less

Suitable for Lavalier mics of 4.5 mm in diameter and up to 15 mm length. The Lavalier Foam is a discreet, slip-on foam windshield, designed to protect personal microphones against light wind and pop noise.Made of durable, high quality open-cell acoustic foam, Lavalier Foam windshields offer up to 20dB of pop and wind noise attenuation, whilst avoiding concurrent high frequency loss. Engineered exclusively for Rycote, this high quality foam also provides excellent resistance against the damaging effects of moisture and UV light. An effective, low profile windshield solution for personal microphones, the Lavalier Foam is available in a range of Black, Beige and Brown colours.Additionally, you can now also benefit from a further 12dB of wind noise attenuation with Rycote's Lavalier Windjammer (Furry). Specifically designed for windier conditions, the Lavalier Windjammer fits on top of the Lavalier Foam and comes in a range of black, grey, and white as standard. These are sold seperatly. Other colours are also available on request to allow you to select the right match for your chosen piece of clothing. Main Benefits: Up to 20 dB wind and pop noise attenuation with minimal high-frequency loss from this slip-on foam windshield. Excellent resistance to moisture and UV light from the durable, high quality open-cell acoustic foam. Available in Black, Beige and Brown for a low profile windshield solution. Pack contains 5 Foams. Rycote Code: 105501

Read more less

Duracell Procell Constant 9V PP3 6LR61 PC1604 batteries are specifically designed to meet the demands of modern industrial and manufacturing environments. Each battery is crafted for devices requiring a consistent 9V power supply, ensuring operational continuity and reliability. The Procell Constant line stands out for its ability to deliver steady performance over extended periods, which is important in critical settings. These batteries are engineered for a long shelf life, which translates to less frequent replacements and better inventory control for businesses. Dependable Power: Reliable energy delivery for devices essential to business operations. Enhanced Longevity: Specially designed for a longer service life in industrial applications. Stable Operation: Maintains consistent output, even in varying environmental conditions. Professional Grade: Trusted by professionals for high-demand equipment and safety devices. The Duracell Procell Constant 9V PP3 6LR61 PC1604 batteries are each built to provide a high-quality power source for demanding applications. These batteries boast a specialized construction that ensures a stable 9V output, which is crucial for devices that require a consistent and uninterrupted power supply. They are particularly suited for professional use, Duracell Procell Constant 9V batteries are ideal for hospitals, schools, TV & Film production, sound and vision, safety & security companies. The Procell Constant series emphasizes durability and performance, which is reflected in the robust design of the 6LR61 PC1604 model. With a focus on providing sustainable performance, these Procell 9V batteries support the continuous operation of essential equipment, thereby contributing to the safety and efficiency of industrial environments. Their bulk packaging is convenient for facilities management, ensuring that a sufficient supply of high-quality batteries is always on hand.

Read more less

Heavy-duty stitching, premium leather, and a reinforced custom snap that provides added durability and integrity.  Show off your favourite tool with a Heritage Sheath. The premium leather Heritage Sheath has been engineered for high performance and built to last. Sheath has a foil stamped logo and custom snap. Made in the USA. Fits 1.75" wide belt and smaller.Size GuideExtra Small: Micra, Squirt (does not include belt loop)Small: Rebar, Wingman, Rev, SidekickMedium: Free P2, Free P4, Wave, Charge, SkeletoolLarge: Super Tool, Surge, SignalInternal CapacityExtra Small: 2.50” x .8” x .42”Small: 4” x 1.35” x .675”Medium: 4.25” x 1.5” x .8”Large: 4.75" x 1.5" x .8"

Read more less

Filter Tabs are perfect for attaching to the side of your camera for quick and easy identification of what filter is currently fitted. Our filter tabs are made in house out of a acrylic laminate material to ensure they are robust and can endure life on set. This Set comes with: SMQ1 SMQ2 SMQ3 SMQ4 Supplied with the pack is a length of Hook material (Velcro) for applying to the Tabs. This is a build to order item - Please allow a working day for them to be produced. Individual Tabs or custom sets are also available, please contact us. Available in the following Colours: Background Colour/Text Colour Black/White White/Black Red/White Blue/White White/Red White/Blue Yellow/Black If you require another colour please contact us.

Read more less

Filter Tabs are perfect for attaching to the side of your camera for quick and easy identification of what filter is currently fitted. Our filter tabs are made in house out of a acrylic laminate material to ensure they are robust and can endure life on set. This Set comes with: 85 85ND.3 85ND.6 85ND.9 Supplied with the pack is a length of Hook material (Velcro) for applying to the Tabs. This is a build to order item - Please allow a working day for them to be produced. Individual Tabs or custom sets are also available, please contact us. Available in the following Colours: Background Colour/Text Colour Black/White White/Black Red/White Blue/White White/Red White/Blue Yellow/Black If you require another colour please contact us.

Read more less

Concord Classic (A4) 2 O-Ring Capacity 25mm Ring Binder New range of paper over board ring binders from Concord. Two O-ring binding mechanism. Spine label for easy identification. Printed lining incorporating useful index panel. Capacity: 25mm. Size: A4.  Features New range of paper over board ring binders from Concord Two O-ring binding mechanism Spine label for easy identification Printed lining incorporating useful index panel Capacity: 25mm Size: A4

Read more less

The BIC Orange Original Fine ballpoint pens are a writing essential with a contemporary design; a reliable option for your writing tasks The pens have an orange barrel distinctive enough to be easily found in your pencil case or desk tidy The pens have been created with NF accredited Environmental Status The 0.8 mm fine-point tip gives a line width of 0.35 mm giving you the accuracy and precision you need whilst writing

Read more less

The Windkiller SE (Special Edition) uses Bubblebees finest imitation fur to effectively protect your DPA 4097 or 4099 mic against wind noise. On the outside, The Windkiller SE for DPA 4097 features a high-density, soft, multi-pile fur to gradually slow the wind down before reaching your mic. Inside, The Windkiller SE uses a soft and smooth, open material. This allows your mic to sound as transparent as possible, whilst protecting your recordings against harmful wind noises. The black elastic tab and press stud keeps The Windkiller SE firmly attached to your microphone, whilst seamlessly blending into the windshield to remain discreet. When fitted correctly, The Windkiller SE holds a bubble of dead air around the front of the mic capsule, allowing the microphone to function as naturally as possible and keeping wind interference at bay. FEATURES: Designed to fit the DPA 4097 Micro Shotgun and DPA 4099 Instrument microphones. Uses the much-loved, multi-pile fur for the ultimate protection against wind noise. Transparent inner fabric maintains a very natural frequency response, on or off-axis. Manufactured in Denmark with quality and comfort in mind by sound lovers, for sound lovers.

Read more less

This refill canister is for use with the Falcon Dust-Off Plus 360° Vector Valve. Specially created for hard to dust areas, the Dust-Off Plus was designed with an innovative 360° Vector Valve which allows the user to blast dust, dirt and lint out of even the most impossible to reach places. Provides amazing range and versatility Ideal for use on keyboards, photographic equipment, workstations etc. 100% ozone safe Contains bitterant to dissuade solvent abuse 300ml * Only for use with the Falcon Dust-Off Plus 360° Vector Valve (not included with this product)

Read more less

Stacking storage bin complete with lid & locking handles can be stacked with or without lid. Dimensions: 240mm Long x 130mm Wide x 125mm External 190mm x 100mm x 104mm Internal Suggested uses include: Photo storage, Postcard storage, Index cards, Stationery

Read more less

The Spares Set for ME2 Lav Concealer contains 6 full sets of metalwork replacements for The Lav Concealer for Sennheiser ME2. A 'set' of metalwork consists of a metal Fabric Guard and a metal Clothing Clip. The Spares Set has 3 x silver sets (for white Lav Concealers) and 3 x black sets (for Black Lav Concealers), making 6 sets in total.

Read more less

The Spares Set for ME2-II Lav Concealer contains 6 full sets of metalwork replacements for The Lav Concealer for Sennheiser ME2-II  A 'set' of metalwork consists of a metal Fabric Guard and a metal Clothing Clip. The Spares Set has 3 x silver sets (for white Lav Concealers) and 3 x black sets (for Black Lav Concealers), making 6 sets in total.

Read more less