The Core Lighting CLH200 rechargeable head torch offers a maximum output of 200 lumens with a beam range of 55 metres distance from a 3 W cree LED.
The left hand power button operates the torch normally and each press will cycle through high, mid, low and off, while holding the button down in any state will access the SOS mode.
There is also a sensor control switch so that the torch can be turned on and off by waving your hand in front of the torch (within 15 cm range), which is perfect for when you're carrying out tasks where your hands may be dirty so you don't want to touch the torch. To operate the torch with sensor control you can activate it by pressing the right button either while the light is on in any mode to use a particular setting, or if pressed from off it will only access the high output. Pressing either button will turn the sensor mode off.
Powered by a built in 1200 mAh lithium polymer rechargeable battery, the CLH200 has a run-time of 5 hours. Recharging the unit is easy, simply insert the micro USB cable into the underside of the head torch (with the torch turned off) and the other end into a USB power source. To show charging is in progress a red LED will illuminate and turn green to show charging is complete after approximately 4 hours.
The high visibility yellow buttons means that they are easier to be seen, which is useful when working in an industrial environment. The fully adjustable nylon headband is comfortable on the head and a hinged bracket allows the head torch to be adjusted downwards within a 45° angle so you can direct the light source where you need it most.
Product Features
USB rechargeable
Rotational head
Sensor control
Adjustable and comfortable head band
Technical Details
Operating Modes: High / Mid / Low / Strobe / Motion Sensor
Luminous Flux: Up to 200 lumens
LED: 1 x white LED
Focus: Fixed focus
Beam Range: Up to 55 m
Run Time: Up to 5 hours
Charging Time: 4 hours
Batteries Required: Built in lithium polymer rechargeable battery x 1
Weight: 50 grams
Dimensions: 50 x 30 x 36 mm
Switch Type: Push button / sensor
Impact Resistance: 1.5 m
Warranty: 1 year
Packaging and Contents Supplied in retail packaging and includes:
Core Lighting CLH200 head torch x 1
Micro-USB charging cable x 1
Manual x 1
This TZe P-touch tape is (12mm) and is a great substitute for Brother tapes all while having similar characteristics as them, Has a standard adhesive that makes application easy and long-lasting that can work outside and indoors.
Features
( 12mm )Similar characteristics as Brother TapesWorks in all Brother P-Touch Models that use Tze tapesEasy appliable standard adhesive that works indoors and outside
Mepitac is highly easy to apply and remove making ideal for use with patients with fragile and sensitive skin.
Mepitac uses Safetac adhesive which ensures that it can be changed without damaging the skin.
Features:
Minimises pain and trauma during dressing changes
Conforms well to the body
Ideal for patients with fragile or sensitive skin
Suitable for patients requiring repeated application and removal of the tape over the same area
GENTLE & SECURE ADHESION: Mepitac Soft Silicone Tape provides reliable fixation while being gentle on sensitive and fragile skin
SOFT SILICONE TECHNOLOGY: Minimizes pain and skin damage during removal, making it ideal for delicate areas.
BREATHABLE & FLEXIBLE: Allows air circulation to promote skin health and ensure comfort during extended use.
WATER-RESISTANT & REUSABLE: Maintains adhesion even in humid or damp conditions and can be repositioned if needed.
EASY TO TEAR & CUT: Can be easily customized for various medical applications, including wound care, tubing fixation, and scar management
Warning - Our Stock is not for medical use due to how it is stored. Our stock is destined for use in audio recording setups.
Tunnel tape has adhesive only on the outer zone edges to create a tunnel to protect cords, cables and wires from the adhesive material.
SKU number is RS197
Also known as Slipway Tape
These mini rolls come on a small core and are the perfect pocket size.
This super high quality Matt Non Reflective Gaffer tape comes with 100% cotton cloth content (120 mesh) and 100% natural rubber adhesive, with zero release coating. This makes the product our most environmentally conscious gaffer tape to date. Most inks used are plant based and ethically sourced.
100% natural cotton cloth
100% natural rubber adhesive
Plant based dyes
FSC approved packaging
No harmful chemicals used in making this product
Reduces your carbon footprint
This product adheres to any clean, dry surface and removes residue free. It’s ‘write on’ absorbent surface is ideal for the TV, film and entertainment business.
With this bundle, you will receive a Red, a Yellow, and two Black rolls of mini tape. Each roll is 5m long.
Annnd ACTION! The classic glow in the dark Movie Slate but reimagined as an enamel pin.
Pin details:
Soft enamel
1.4" Gold plated metal with two metal locking backs
*GLOWS IN THE DARK*
This Hultafors FI10ME C Futura Fibreglass Long Tape has both metric and imperial measurements.
Specification: Blade Length: 10m/33ft Blade Width
13mm Accuracy: EC Class II
So light you won’t want to take them off.So versatile you won’t need to.
Keep your ring & little finger are covered, whilst the tips of your thumb, middle and index finger remain instantly accessible for intricate tasks. The fitted design moves with your hands as you work, minimising the risk of snagging and making it a comfortably light glove to wear. Although light, the Comfort Fit™ doesn’t hold back on durability. The breathable materials look after your hands on the inside, whilst the double-layered ultra-tough synthetic leather and double stitching do the hard work on the outside.
Light & flexible for all-day comfort
Snug fit to minimise snagging
Double layered synthetic leather on palm and key wear areas
Double stitched seams
Double stitched lanyard eyelet on wrist cuff (lanyard not included)
Neoprene comfort padding
Write on ID tag
The Filmsticks Gripcase – Medium Wet Weather Tag Board Cover is a premium protective solution designed for Gripsticks Clapperboard Kits and Wet Weather Tag storage. This rugged, multifunctional case offers clapperboard protection, efficient tag organisation, and enhanced on-set versatility.
Featuring a soft-side fastener material exterior, the Gripcase allows hard-side fasteners to attach on both the front and back, maximizing usability. Its reinforced edges and sturdy flat surface provide a secure platform for Wet Weather Tags, ensuring quick and organised access on set. The integrated D-Rings offer versatile carrying options, allowing attachment of a shoulder strap or carabiner for easy transport.
Designed to withstand the rigors of professional filmmaking, this durable and lightweight case is an essential companion for ACs, script supervisors, and production crews working in various filming conditions.
NOTE: This is for the Gripcase only. No clapperboard or accessories are included.
Key Features & Benefits
Premium Clapperboard Protection – Designed to fit and safeguard Gripsticks Clapperboards, preventing scratches, scuffs, and damage.
Wet Weather Tag Organisation – Provides a flat, sturdy surface for efficient storage and easy access to Wet Weather Tags.
Soft-Side Fastener Material Exterior – Enables hard-side fasteners to securely attach to both the front and back, enhancing usability.
Versatile Attachment System – Compatible with optional add-ons such as a handle or tool pouch, increasing on-set functionality.
Reinforced Edges for Stability – Ensures long-lasting durability while maintaining a firm, stable surface for tag placement.
Integrated D-Rings for Portability – Allows for shoulder strap or carabiner attachment, offering easy transport and hands-free carrying.
Why Choose the Filmsticks Gripcase?
Designed for Professional Use – Engineered for ACs, script supervisors, and production crews handling clapperboards and tag organisation.
Multipurpose Functionality – Acts as both a clapperboard cover and a Wet Weather Tag board, improving efficiency on set.
Lightweight & Durable Construction – Provides strong protection while remaining easy to carry.
Enhanced Customisation – Attach handles, tool pouches, or additional accessories for improved versatility.
Optimised for Fast-Paced Film Sets – Ensures quick and seamless access to essential tools, keeping production running smoothly.
The Ultimate Clapperboard & Tag Management Solution
The Filmsticks Gripcase – Medium Wet Weather Tag Board Cover is the go-to solution for professionals who need reliable clapperboard protection and tag organisation. Whether you’re working in unpredictable weather conditions or managing complex shot logs, this versatile, durable, and transport-friendly case ensures your gear stays protected and accessible at all times.
Upgrade your filmmaking workflow with the Filmsticks Gripcase – Built for protection, designed for efficiency
The Gripcase is designed to provide a board cover which meets requirements to manage Wet Weather Tags.
The external cover is made up of soft-side fastener material, allowing for hard-side fasteners to attach to it, both front and back. This makes full use of the Gripcase and allows for optional attachments such as a handle or tools pouch to be fastened onto the back.
The edges have been reinforced with piping, which further helps provide a sturdy flat surface to place wet weather tags on.
The two D-Rings attached on the back will allow for a Shoulder Strap or Carabiner to be used to carry the Gripcase.
Technical Specifications
Dimensions: 313mm x 205mm x 20mm (12.3” x 8.1” x 0.1”)
Weight: 200g (0.44 lbs)
Material: Soft-side fastener fabric with reinforced edges
Compatible With: Gripsticks Clapperboards & Wet Weather Tags
Safety and Compliance (GPSR Requirements – EU):
This product complies with the General Product Safety Regulation (GPSR), ensuring safety for both professional and personal use.
Potential Hazards
Fire Hazard: Exposure to open flames or high temperatures may cause the material to ignite or deform.
Suffocation Risk: The cover could pose a suffocation hazard if improperly handled, especially around children.
Allergic Reactions: Some individuals may experience skin irritation or allergic reactions to the cover's material.
Usage Guidelines:
Installation: Ensure the clapperboard is clean and dry before fitting the GripCase cover. Slide the cover over the clapperboard, ensuring a snug fit.
Environment: Keep the covered clapperboard away from open flames, heaters, or other high-temperature sources.
Storage: Store the cover in a cool, dry place when not in use. Avoid prolonged exposure to direct sunlight, which may degrade the material.
Cleaning: Wipe the cover with a damp cloth to remove dirt or debris. Do not use harsh chemicals or abrasive materials.
Residual Risk: When used according to the manual, risks are minimal. Click this link for the full safety manual guidelines -> https://tinyurl.com/2ssmuf7n
Adherence to this safety guidance ensures compliance with the General Product Safety Regulation (GPSR) requirements. Declaration of Conformity Document -> https://tinyurl.com/4k9kphwt
Measurement: 313mm (12.3") x 205mm (8.1") x 20mm (0.1”)Weight: Approximately 0.2kg (200g), 7oz, 0.44 lbs
Viviana Dot stickers are low-profile hypoallergenic tape featuring a 1mm foam layer sandwiched between super sticky tape that can be used on skin and fabric.
This configuration creates an additional barrier between lavalier microphones and fabric, effectively preventing rustling noise.
They are skin-safe, clothing-friendly, and leave no residue.
The Viviana Dot Premium are available in packs of 30 pieces, 70 pieces, and 120 pieces and are also compatible with Bubblebee Lav Concealers, Ursa Mini Mounts and DPA Concealers.
URSA Sticky Zeros are sticky circles with a hole - see-through adhesive circles from URSA's clear stickies range, with a low profile of just 0.4mm and a 14mm hole in the centre.
They are hypoallergenic and safe to use directly on the skin or fabrics, as they won't leave any residue and can be peeled off without tearing. Every Sticky Zero has a small peel-off tab for quick and easy use, and is compatible with various mic mounts such as RM11s, DPA Concealers and URSA MiniMounts.
Key Features
See-through adhesive circles with a 14mm centre hole.
Low profile - just 0.4mm.
Hypoallergenic - safe directly on skin or fabrics.
No residue; peels off without tearing.
Small peel-off tab on every zero.
Compatible with RM11s, DPA Concealers & URSA MiniMounts.
Sold as a Pack of 90.
What's Included
90x pre-cut URSA Sticky Zeros.
THE ULTIMATE SOLUTION FOR DISCREET CABLE MANAGEMENT
Crafted with hypoallergenic transparent materials, this breathable and sweat proof tape offers a discreet low-profile solution for effortlessly managing your lavalier microphone cable. The matte, skin-like finish facilitates seamless makeup application, allowing you to discreetly conceal your lapel mic cable in plain sight. Whether mounting a lavalier mic or seeking a subtle way of attaching an IEM earpiece cable to the skin (such as The Sidekick), The Invisible Skin Tape is your trusted choice for reliable and discreet cable fixing. Each pack includes 40 pieces of The Invisible Skin Tape, conveniently stored in a small, reusable zip-lock carry case.
Features:
SAFE TO USECreated using hypoallergenic transparent materials, our tape ensures skin-friendly, comfortable, and discreet cable concealment.
SECOND LAYER OF SKINExperience adhesive durability, breathability and sweat-proof performance whilst providing a long-lasting solution without concerns of peeling or sliding off (often for days at a time), even in humid conditions or under the bright lights of Broadway and The West End.
LOW-PROFILE DESIGNCrafted with subtlety in mind, our tape provides a discreet solution, guaranteeing your cable stays in place on skin and under clothes, without any concerns of cable noise caused by tape friction.
HIDE IN PLAIN SIGHTFeaturing a matte, skin-like finish, our tape allows for makeup application; allowing you to effortlessly blend your lapel mic cable into the skin, making The Invisible Skin Tape an excellent solution for theatre and film productions.
QUICK AND EASY TO USEWhether you're mounting a lavalier mic, headset mic or attaching the Sidekick (or other IEM earpiece) to the skin, our tape is a versatile solution that is quick and easy to apply and remove. Despite the longevity of the application, The Invisible Skin Tape can easily be removed without leaving any sticky residue on the skin.
WHAT'S INCLUDED:40 x Invisible Skin Tape1 x Reusable zip-lock carry case
ITEM CODES:BBI-IST-40
The Bondhus BT5/32 T-Handled Hex Ball End is a durable hex key wrench and comes with an easy to handle grip design making it easy to deal with rusted and stuck screws, Featuring a ProGuard finish and being made from durable alloy steel this key is very resilient and will last for years.
Easy to grip ergonomic handle design
ProGuard for protection against corrosion
Size: 5/32"
Length: 9.1"
The Mag Master Pro is a magnetic tool holder that will hold a wide variety of tools while also supporting them within weight restriction.
There is no other magnet as strong as these on the market.
The Pro has a milled aluminium housing and a upgraded belt clip.
Features
Super strong magnet holds anything magnetic.
Clip it where you want it - belt, pockets, or tool pouches.
Speed up workflow - never set a tool down or lose track of hardware again.
Light and durable milled aluminum back plate.
Neodymium N52 magnet in a hard rubber cap.
Spring-steel 1.75" (45mm) belt clip.
*MagMaster Pro is a strong magnet but it's still a passive retention device. Please use caution when carrying heavy tools and working overhead. Please also be cautious around equipment that is affected by magnets.
A full foam set including a convoluted lid foam, base foam and Pick 'n' Pluck. This pre-scored, cubed foam allows you to create an insert tailored to your equipment
A full foam set for the 1510 Case.
Replacement foam set.
This full foam set for the 1510 Protector Case includes a lid foam, base foam and one or more layers of Pick 'n' Pluck foam. The Pick 'n' Pluck layers are pre-scored, so you can easily pluck out sections as required, creating a foam insert tailored to your gear.
Case not included
A WINDBUBBLE DREAM TEAM FOR YOUR CONVENIENCE...
Each package contains 1 black, 1 grey, 1 brown and 1 white Windbubble.
The Windbubbles are build to stay safe and secure on the microphone, and therefore comes in four different sizes.
The frequency through the Windbubble is very close to the microphones natural sound.
The wind reduction is the best in the industry, thanks to the bubble-effect in the design.
The fur is less shiny to blend better with skin, clothes and other surroundings.
Designed in Denmark by sound lovers, for sound lovers.
The Bubblebee Windbubbles consist of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing.
And this nothing is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside.
So instead of the wind hammering on the microphone and making those horrible "I’m in the middle of a hurricane"- sounds, it passes right through.
The Windbubbles are specially constructed to be mounted quickly and easily on the specified types of microphone and to not fall off during use.
The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphones.
CHOOSE THE CORRECT SIZE
It is important that you check the correct size(s) suitable for your lavalier microphone. Please consult our Size Guide to check this.
Size 1 - Built for microphones with a diameter of 3,0-4,0 mmElastic opening circumference: 28 mm (1.10”)For Example:Sanken COS-11 (without metal windscreen)Countryman B6, B2D, E6Sennheiser MKE 1Sony ECM-90DPA 6060
Size 2 - Built for microphones with a diameter of 5,0-8,0 mm:Elastic opening circumference: 35 mm (1.38”)For Example:Sanken COS-11 (without metal windscreen)Countryman B3DPA 4060Sennheiser MKE 2, ME2, ME2-US (without windscreen), ME2-IILOM Mikro Uši
Size 3 - Built for microphones with a diameter of 5,0-9,0 mm:Elastic opening circumference: 40 mm (1.57”)For Example:Sanken COS-11 (with metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II
Size 4 - Built for microphones with a diameter of 8,0-13,0 mm:Elastic opening circumference: 42 mm (1.65”)For Example:Sanken COS-11 (with large metal windscreen)Countryman EMWDPA 4060 (with metal windscreen)Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)LOM Uši Pro
The T Marker is a heavy-duty floor marker designed to mark the places of the actors on the set. It is filled with shot, making them extremely durable and heavy enough to stay in place. Utilise the eyelet to string them up for convenient storage and portability. Perfect for alternatives when you don't want to use tape markers.
These markers are manufactured out of a PVC material. This allows them to be easily cleaned after use in muddy and/or dirty locations.
The Scan Breathable Microfoam Nitrile Gloves are manufactured from a knitted grey spandex liner with a microfoam nitrile palm coating. These gloves are suitable for use in many processes involving the handling of small metal or plastic parts, or any situation where high dexterity is required. Extremely light and breathable, the special microfoam coating offers a secure grip in both wet and dry applications, with no sticky side effect and is oil and grease resistant.
Lightweight, high dexterity construction
15g nylon / spandex liner
Oil and grease resistant
Highly breathable
Conforms to EN420 and EN388
Whether in the office, at presentations or at lectures, giving back to the world feels always great.
It is especially easy with the edding 28 EcoLine whiteboard marker, as at least 90% of the total plastic used comes from recycled material.
Thereof even 83% from post-consumer plastics such as used yoghurt pots or watering cans.
The edding 28 EcoLine whiteboard marker has a variable chisel nib releasing an ink, which can easily dry-wiped from virtually all non-porous surfaces.
Better yet, if the cap is left off after a busy presentation or lecture, there is no need to worry - even after several days it won't dry out.
It can be refilled and used multiple times, making it not only eco-friendly but also economical viable for any office or educational facility.
chisel nib 1-5 mm 90% recycled plastic
climate neutral product dry wipeable
refillable open for days
whiteboard flipchart
