True 75 Ω design meets the stringent HDTV / DVD requirements “rearTWIST Principle” locking/unlocking Excellent cable protection and retention Guarantees a lifetime of min. 1000 mating cycles Precise Swiss machined brass parts for outstanding durability

Read more less

Simply use this marker just like a pen to marker on any surface. Plastic, foil, rubber, wood and even glass are no match for this pack of black Sharpie permanent markers. The high intensity pigment of the innot only dries instantly but is also both waterproof and smear-proof.

Read more less

Fits: 1510 Mobility Case 1510 Protector Case Dimensions: Int. Length (mm) 494 Int. Width (mm) 268 Int. Depth (mm) 136

Read more less

Grey ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty faint light grey colour. A much lighter shade than Black. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly. Grey – light grey colour. Very light shade, low density, subtle colour. Good for mixing with others or very light shading to just make things look slightly dirty. Several coats looks like one coat of Black (above). It is perfect for its use in TV or films, when the ageing effect needs to be washed completely. Makes a good “sweat” stain effect. Usage Instructions: Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather. Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.

Read more less

BNC T Piece (F+F-M) (75 Ohm)

Read more less

Aluminium Form Holder A4 by Westcott With separating device, laterally-Opening, versatile and practically usable Inner page clip holder Retention tray with attachment strip E-17004 00 aka: Sheet Tin, Form Holder, Neg Report Holder.

Read more less

The original Sprig for 1/4" and 3/8" Whitworth threaded holes. Made from a flexible material and features a flexible thread for fast installation with a secure hold. A perfect accessory for securing and cleaning up the cables on your camera or monitors. Cable management device for filmmakers! Includes: 10 of 1/4" & 5 of 3/8" sprigs  

Read more less

MOUNTING A LavALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. Note: The RØDE Lavalier II is not suitable for use in this model of The Lav Concealer. Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape

Read more less

FOR ULTIMATE TRANSPARENCY AND INVISIBILITY... The Invisible Lav Covers - Original allow you to easily mount and hide your lavalier microphones directly on the skin or on clothing, whilst protecting your audio against clothing rustle. Each package of The Invisible Lav Covers Big Bag - Original consists of 40 pieces of mesh fabric, each reusable 3-4 times, for at least 120 mounts (choose from black/beige/white). FEATURES: Optimal for use under clothing Provides you with ultimate transparency and invisibility when mounting your lavalier mics Available in black, beige or white Stick directly to the skin or clothing 40 pieces of reusable aerated mesh fabric Each piece can be used at least 3 times, giving you 120 mounts per bag Comes in a useful reusable zip-lock storage pouch Designed in Denmark by Sound Lovers, for Sound Lovers While the fabric can be used many times, you will be able to do a minimum of 120 mounts per pack. Use their transparent, double-sided Invisible Lav Tape (sold separately) to keep your microphone and Invisible Lav Cover firmly in place whilst sticking directly to the skin or to clothing allowing the microphone to be safely and securely mounted almost anywhere. It’s all about being creative: under the collar, next to a buttonhole, or under the clothing in the chest area. Not sure which colour to use? The Invisible Lav Covers - Original are also available in a smaller multipack, that also includes our Invisible Lav Tape. SPECIFICATIONS Each piece of fabric and tape measures 2.2 cm x 2.2 cm (0.86” x 0.86”), and comes in a handy reusable zip-lock storage pouch. Item codes: BBI-ILC-O-40BK/BE/WH Product warranty: This product is covered by their two-year warranty securing against defects in material, design and workmanship. The full-length warranty is available for download here. Also available: Invisible Lav Covers, Big Bag - Fur Outdoor: For ultimate wind protection and fabric noise reductionInvisible Lav Covers, Big Bag - Moleskin: For ultimate invisibility and fabric noise reduction

Read more less

Hook and loop tape comes on a sticky-back self-adhesive liner, making it simple to cut to your desired size. Ideal for endless projects. Strong adhesion offering an instant bond to most surfaces. Offered in 25mm width. Sold by the Metre or pack of 25 Metre Rolls Aka: Velcro

Read more less

Scapa 3130 is a high quality 80 mesh, polyethylene coated waterproof cloth tape, coated with a pressure sensitive natural rubber resin adhesive and a superior matte finish. Scapa 3130 is available in Chromakey blue and green for the entertainment industry. Good all round performance. Can be written on. Peels off cleanly after use, even after 6 weeks. Very easy tear by hand. Easy unwind for ease of use. Good initial tack and ultimate adhesion. Highly flexible and conformable to support use in difficult and uneven surfaces. Can be removed cleanly from surfaces after being in situ temporarily. Good strength and durability. Excellent waterproof properties. Excellent matt finish prevents the reflection of light.

Read more less

Round Large Viewfinder Eyecushion, #2012 77 mm / 3.03" diameter Compatible with: Arri 235, Arri 435, Arri 535, Arri Alexa, Alexa Mini, Arri Amira, Arri SR2, Arri SR3, Blackmagic eyecup, Bolex H16, Canon C100, C200, C300 (when using the Andrew Miller C-Cup), Hitachi Videocam, JVC GY-HD100U, Panasonic GH3 and GH4 (G-Cup), Panavision Genesis(old version), Small HD 502 Sidefinder, Sony a7 Series (A-Cup) Since 1984, every single genuine Bluestar Eyecushion is carefully crafted and inspected one at a time to ensure a perfect, sanitary, safe and consistent Eyecushion, right here in our Toronto production studio. Our production and inspection staff are taught and updated on an ongoing basis to ensure consistency of our high standards. In a world where quality is commonly compromised for profit, we are proud to maintain our high standards and deliver to you a high quality Canadian made product. And interestingly, Bluestar Eyecushions have been tested by Nasa engineers for space use and could be the first Eyecushions sent to Mars. As the worldwide leader in the Camera Viewfinder Eyecushion market since 1984, Bluestar has become synonymous with Eyecup comfort around the world.

Read more less

Micro Windjammer Rycote has been making Windjammers for professional broadcasters and film-makers for over four decades and are recognised as the industry-standard for wind protection products. These days even the smallest compact cameras allow you to shoot great, high-quality video but if you've ever tried filming outdoors on even a mildly blustery day, you'll know that the wind can wreck your perfectly composed soundtrack in a matter of seconds!Our fantastic Micro Windjammer is easy to fit and provides all-in-one wind protection for your camera's built-in microphone helping you to capture great sounding audio, even outdoors. Designed to help prevent wind noise from destroying the audio recording from your HDSLR camera, camcorder or compact digital camera, the Rycote Micro Windjammer is also compatible with the IPhone, IPad and most other mobile phones. This invaluable piece of kit for all your outdoors recordings is handy, easy to fit and leaves no residue on removal.Made by Rycote in the UK. Each individual pack contains 30 Stickies and 6 reusable grey fur discs. Main Benefits: Micro Windjammer provides versatile wind protection for the built-in microphones on a range of devices Fits over the built-in microphone on HDSLR cameras, camcorders and compact cameras Compatible with iPhone, iPad and most other mobile phones and tablets Greatly reduces wind noise, to help you to capture great audio, to go with your video An invaluable piece of kit for your outdoor recordings great for improving the sound quality of vlogs and YouTube videos Handy, easy to fit, easy to remove and leaves no residue Each individual pack contains 30 Stickies and 6 reusable grey fur discs

Read more less

SPECIALLY DESIGNED DOUBLE-SIDED HYPOALLERGENIC TAPE PADS FOR MOUNTING THE Lav CONCEALER TO CLOTHING OR DIRECTLY ON SKIN. The Lav Concealer Tape features very strong binding glue that is safe to apply to skin and fabric, affixing The Lav Concealer firmly to the talent where a clip isn't possible and the microphone has to remain hidden for camera. The new design features a handy thumb tab which makes application super-easy. Simply lift the tape from the backing tape using the thumb-tab. Line up and press the glue-side firmly onto The Lav Concealer. Use the thumb-tab to remove the guard paper, leaving the double sided tape on the concealer. Fit to clothing or skin.

Read more less

1000kg rated strength with a minimum break strain of 500 DAN. Used for securing/lashing and fastening loads. Conform to EN12195-2:2001 safety performance requirements. Quick release mechanism for easy use. Produced from 100% polyester material. Available in 4.5m (endless), and 4.5m (with hooks) lengths. 1000kg Mini Ratchets have a 25mm webbing width. Custom made 1000kgs mini lashing systems can be produced. Rubber corner protectors are available to protect the webbing (please see Rubber Wear Sleeves). Each part of the Mini Ratchet is marked with manufacturers mark, size, length and ID mark. Individual certification can be supplied. Measured from bearing point to bearing point.

Read more less

A Clear Zipper Case with a blue lined zipper. Fit up to 8 URSA Straps in one Case. Very handy for storing and organising your URSAs. Seen here stored using velcro on the lid of a radio mic box. Each case stores a different size of strap. Each URSA Zipper Case comes with an URSA Colour Chart Card & a fancy URSA Sticker. Dimensions : 203 x 127mm (8inx5in) SKU: U-ZIPPERCASE

Read more less

FEATURES & BENEFITS Blade snapper included in handle for safety Multi-position push button for quick, easy use Two part moulded body that allows rapid blade changing.

Read more less

Low profile, light weight and extremely durable. The Pro-Pocket 2.0 has a unique layout design which enables it to hold a professional’s must-have tools and necessities with minimal bulk. Increased durability with 1200 denier nylon polyester (previously 600). Wider phone pocket, 10cm(h) x 7.5cm(w) x 2cm(d) now fits most larger smart phones. 1 x Side mounted D-rings 1 x Detachable 26cm accessory loop Single-handed tool access Low profile, unobtrusive design Easy on/off belt flap (allowing independent removal from belt) Integrated accessory loop with snap hook included 1 x internal tool pocket: 10cm(h) x 3cm(w) x 2.5cm(d) 1 x open-bottomed tool pocket (2.5cm diameter) 1 x open-bottomed tool pocket (3cm diameter) 1 x open-bottomed tool pocket (2cm diameter) 1 x open-bottomed pen pocket 1 x side-mounted podger pocket (2cm diameter) Hook & loop closure flap Overall pouch size 20cm(h) x 14cm (w) x 4.5cm (d) – Main structure only (excludes snap hook and accessory loop) Tool bag contents not included. Measurements are approximate. Ensure tools remain securely held in place at all times. If using this item while working at height you should ensure tools are adequately secured and could not become a ‘falling object’ hazard.

Read more less

• Black underside with black adhesive• Matt black low-reflective top surface• Individually wrapped rolls• Minimal light penetration• Easy tear by hand High Performance Black AdhesiveWith an all-black underside and adhesive, this tape is very discrete when applied to most black fabrics, blackout materials, black stage sets and props. Anti-Reflection CoatingA satin-matt, low reflection surface. Ideal for use in professional TV, film & theatre. Durable 80 Mesh ConstructionA durable 80 mesh construction offers good levels of durability.

Read more less

Included: Aye Max-Hinge x 1Holstery MagMaster Pro x 1 About Aye Max Hinge: The Aye Max Hinge and Filmsticks solution to attaching a board to an AC securely meets the brief perfectly using a magnet to attach a clapperboard to belts without any hooks or loops. The Hinge gives you a fast secure place to put your board while you carry out your tasks while being very strong and a reliable solution than using resting / floor bags to store away your board. Easy to snap on and pull off securely the hinge is extremely important as it gives the whole surface area of magnetisation in order for the board to attach securely to the magnet rather than just a single screw. Features Easy to fit onto existing Medium and Small All-Weather Filmsticks. Full flat base for secure fitting onto a suitable magnet clip. Secure holding whilst managing multiple tasks. Aluminium shell to reduce the Hinge weight loading. Aluminium exterior Hinge Pate, fitted with Iron inserts CNC machined to fit the existing Hinge plate specifications About the MagMaster Pro: The Mag Master Pro is a magnetic tool holder that will hold a wide variety of tools while also supporting them within weight restriction. There is no other magnet as strong as these on the market. The Pro has a milled aluminium housing and a upgraded belt clip. Features Super strong magnet holds anything magnetic. Clip it where you want it - belt, pockets, or tool pouches. Speed up workflow - never set a tool down or lose track of hardware again. Light and durable milled aluminum back plate. Neodymium N52 magnet in a hard rubber cap. Spring-steel 1.75" (45mm) belt clip. NOTE: Clappersticks not included, these are available separately. The Aye Max-Hinge is only compatible with medium and small Filmsticks All-Weather Clappersticks MagMaster Pro is a strong magnet but it's still a passive retention device. Please use caution when carrying heavy tools and working overhead. Please also be cautious around equipment that is affected by magnets.

Read more less

The Kondor Blue Anti-Twist Spacer for mini quick release plates is compatible with SmallHD Monitors featuring the locator pins and will keep your accessories from twisting or unscrewing while on the job. The thin aluminium plate slides over the thread on the separately available quick release plate, allowing you to attach the monitor securely. Dimensions: Dimensions: 5" x 3" x 0.2" Weight: 0.3 oz

Read more less

These Emergency Blankets can be used as camera covers that are perfect for keeping dust and light rain off your camera and head when they are not in use. Silver inside to help reflect heat/sun. Available in red or blue aka spaceblanket. space blanket

Read more less

Elasticated ball bungees are simple, reliable and perfect for cable maintenance and equipment hanging.

Read more less