Shurtape Console Tape is a premium paper tape that is printable and removes cleanly. Is ideal for use on sound and lighting boards. Easily tearable by hand this tape also leaves minimal to no residue when peeling off and can be used for writing on without any fuss. Features: Can write on it. Low/No Residue Tearable by hand Flexible Resistant to water, oil, and solvents Provides excellent adhesion Meets LHAMA requirements for use in arts and crafts

Read more less

3/8'' screw 5/8'' (16mm) socket Aluminium

Read more less

Cam Buckle 2pcs (250KG), Black • 250kg rated strength with a minimum break strain of 125 DAN• Used for securing loads.• Conform to EN12195-2:2001 safety performance requirements.• Quick release buckle mechanism for easy use with grips on the buckle to prevent slipping.• Produced from 100% polyester material.• 250kg Cam Buckles have a 25mm webbing width.• Each part of the Cam Buckle is marked with manufacturers mark, size, length and ID mark.• Individual certification can be supplied.• Measured from bearing point to bearing point.

Read more less

Grey ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty faint light grey colour. A much lighter shade than Black. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly. Grey – light grey colour. Very light shade, low density, subtle colour. Good for mixing with others or very light shading to just make things look slightly dirty. Several coats looks like one coat of Black (above). It is perfect for its use in TV or films, when the ageing effect needs to be washed completely. Makes a good “sweat” stain effect. Usage Instructions: Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather. Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.

Read more less

Speciality grade, photographic black masking tape for use in photo studios, film processing labs and darkrooms. Also recommended as a chart tape, for quality photographic reproduction work, cropping and edging negative for contact printing, and sealing camera bellow and film holders against light leaks. Designed with an opaque black matte surface that ensures light-free masking, CP 743 is versatile, reliable and considered to be the "photographer's masking tape." Features & Benefits Speciality grade photographic black masking tape Very high adhesion Light-free masking Good quick stick Highly conformable aka, shuretape, shure tape, ShurTape (Permacel) - Black - 48mm (2") x 27m On a small core for easier carrying

Read more less

The original Sprig for 1/4" and 3/8" Whitworth threaded holes. Made from a flexible material and features a flexible thread for fast installation with a secure hold. A perfect accessory for securing and cleaning up the cables on your camera or monitors. Cable management device for filmmakers! Includes: 10 of 1/4" & 5 of 3/8" sprigs  

Read more less

The Kimtech Science Precision 7557 are light duty 2-ply wipes that are effective in cleaning glassware, Lenses, slides, sensitive surfaces and equipment. Made of 100% pure fibre and having a high absorbency rate makes these wipes ideal to use in working environments that need delicate cleaning applications, Also contains an anti-static dispensing to reduce lint and antistatic discharge. Features : 24 cartons x 100 white 2 ply sheets = 2400 sheets Light duty, white-coloured wipes made from 100% pure fibre Provided in a hygienic, user-friendly pop-up box Low-lint absorbency for delicate applications and surfaces

Read more less

Elasticated ball bungees are simple, reliable and perfect for cable maintenance and equipment hanging.

Read more less

The URSA MiniMounts are a slim, low-profile mount designed to be rigged where larger mounts cannot go. They are made from a hardened plastic which does not deform or snap under pressure. Each mount is hand finished to get the smoothest surface to allow fabric to glide across silently. This MiniMount is deigned to fit the DPA 6060. MiniMounts are are available in four colours. Black, Brown, Beige, White. There are seven models available, They are designed specifically for the Deity W.Lav Pro, DPA 4060, 4071, 6060, 4660HD, RODE LAV/LAVii, Sanken COS11, Sennheiser MKE1 & MKE2, ME2, Shure Twinplex and Sony ECM-V1. More About URSA MiniMounts Easy to rig beside buttons on shirts where larger mounts will not fit! Their thin shape makes them perfect mounts for rigging on the skin in the cleavage or onto the bra. Quick & Easy to wind protect using URSA Sticky Circles and Fur Circles. MiniMounts are moulded from hardened plastic. They won t snap under pressure or deform under heat. Each MiniMount is hand finished to get the smoothest possible surface. This helps fabrics glide over the mount without creating friction and noise. Each pack comes with 5 free MiniMount Stickies. These stickies measure 11 x 22mm and are designed specifically for MiniMounts. Our MiniMount Stickies are hypoallergenic and safe to use against skin. They also do not leave residue if used on costumes and delicate fabrics. MiniMounts measure 11m wide x 22mm long x 6mm tall. Our 6060 & MKE1 measure 9.5m wide, 20mm long x 5mm tall. The DPA 4060 model also fits a CountryMan B3 with a Cap. The MKE1 model also fits a Countryman B6. The MKE1 & MKE2 models are designed to be used WITHOUT caps on the mics. This allows the mount to be as small as possible. Made for: DPA 606x Dimension: 20 x 9.5 x 5mm

Read more less

Fur Circles are designed to be used under clothing to reduce wind noise and clothing rustle. Fur Circles are cut using a unique drilling method which only cuts the base and allows allows the fur to be of an equal length around the edge of the circle. Fur Circles can be compressed under tight costumes and leave less of a lump than other furs. Each pack comes with 30 URSA Sticky Circles which are hypoallergenic. More About URSA Fur Circles Multipacks contain 3x White, 3x Black, 3x Brown & 30 Stickies. Fur Circles are reusable up to 4 or 5 times. Can be stuck directly to skin or clothes. Single Colour Packs contain 9 of one colour & 30 Stickies. Available colours : Black, White & Brown. 25mm diameter, re-useable & super soft. Low profile lav cover creates less of a lump under costumes.

Read more less

MIC STRAP WITH UNIQUE GRIPPER. URSA Chest Straps allow you to rig microphones onto sweaty or hairy chests which would otherwise not take sticky tape.Reduces noise from hairy chests and allows you to rig on hot, sweaty bodies. Unique Gripper strips keeps the strap from slipping. Mic Pouch comes with 3 sections to fit all microphone sizes & mounts. Ultra-Thin fabric becomes invisible even under tight T-Shirts. Unique Cable Keeper stops the mic from pulling out of the pouch. One Size fits all strap. Available in Beige, Black, Brown Caramel and White More About URSA Chest Straps The Mic pouch on our Chest Straps have 3 compartments, the central pouch fits an URSA Foamie, MiniMount, RM11, DPA Concealer. The thinnest pouch fits a COS11 and the third pouch fits a larger DPA size microphone without a mount. Our unique polyurethane gripper is bonded to either side of the pouch to keep the strap from slipping down the chest. We utilise a Cable Keeper which keeps your cable firmly in place without needing to tape it to the strap. Available in Beige, Espresso, Black and now White. The Chest Strap comes in one size measuring 110cm long which can be rigged on Chests up to 45 inches across. URSA Straps use certified OEKO-TEX hypoallergenic fabric and gripper.

Read more less

Staedtler Lumocolor non-permanent fine markers are a fast drying non-permanent marker containing water-soluble ink. They are a universal marker that can be used on almost all surfaces and can be easily wiped off shiny & glossy surfaces with a damp cloth. Staedtler Lumocolor non-permanent fine markers are available in eight brilliant colours and they can be easily refilled with Staedtler non-permanent refill ink. The M fine tip writes approximately a 0.8mm line.

Read more less

True 75 Ω design meets the stringent HDTV / DVD requirements “rearTWIST Principle” locking/unlocking Excellent cable protection and retention Guarantees a lifetime of min. 1000 mating cycles Precise Swiss machined brass parts for outstanding durability

Read more less

A reusable cleaning cloth designed so the cloth holds dirt away from the surface whilst a good finish. Also great for absorbing water and drying off kit.  Washable when dirty. 6 Quality Microfibre cloths - 40cm x 30cm.

Read more less

100g Bag Silica Gel Desiccant Damp Absorb Moisture Absorber Dehumidifier Packet Camera Computer Media Storage Drier Drying Tool.

Read more less

Constructed of padded, hook and loop knit with a non-scratch nylon backing, these squares can be wrapped around lenses, tools, or anything else that will fit inside. Hook and loop tabs on all four corners let you wrap and stick them in any shape. Features: 19 inch from corner to corner Hook and loop for sealing off the corners Ideal for colour co-ordinating Non scratch nylon backing Available in Black, Blue, Red, Yellow & Grey These are available in three sizes: 11", 15" and 19"

Read more less

The transparent pouch has been designed to hold and see all your work accessories. It can be easily held on to one of your Samas bags through the Velcro system. Useful and convenient for every need.  Pouch can contain a different coloured strap to one shown in picture due to stock count, Coloured straps come in Red, Yellow, Green and Purple. Available in two different sizes: Small L18cm x H16cm x W6cm and Large L24cm x H26cm x W6cm

Read more less

Included: Aye Max-Hinge x 1Holstery MagMaster Pro x 1 About Aye Max Hinge: The Aye Max Hinge and Filmsticks solution to attaching a board to an AC securely meets the brief perfectly using a magnet to attach a clapperboard to belts without any hooks or loops. The Hinge gives you a fast secure place to put your board while you carry out your tasks while being very strong and a reliable solution than using resting / floor bags to store away your board. Easy to snap on and pull off securely the hinge is extremely important as it gives the whole surface area of magnetisation in order for the board to attach securely to the magnet rather than just a single screw. Features Easy to fit onto existing Medium and Small All-Weather Filmsticks. Full flat base for secure fitting onto a suitable magnet clip. Secure holding whilst managing multiple tasks. Aluminium shell to reduce the Hinge weight loading. Aluminium exterior Hinge Pate, fitted with Iron inserts CNC machined to fit the existing Hinge plate specifications About the MagMaster Pro: The Mag Master Pro is a magnetic tool holder that will hold a wide variety of tools while also supporting them within weight restriction. There is no other magnet as strong as these on the market. The Pro has a milled aluminium housing and a upgraded belt clip. Features Super strong magnet holds anything magnetic. Clip it where you want it - belt, pockets, or tool pouches. Speed up workflow - never set a tool down or lose track of hardware again. Light and durable milled aluminum back plate. Neodymium N52 magnet in a hard rubber cap. Spring-steel 1.75" (45mm) belt clip. NOTE: Clappersticks not included, these are available separately. The Aye Max-Hinge is only compatible with medium and small Filmsticks All-Weather Clappersticks MagMaster Pro is a strong magnet but it's still a passive retention device. Please use caution when carrying heavy tools and working overhead. Please also be cautious around equipment that is affected by magnets.

Read more less

This T-Handle Driver from Linky is ideal for undoing base plate screws and has a durable plastic handle that makes screwing / unscrewing quick and easy as well as being comfortable to grip. 10mm Slotted Driver 100mm Total Length Head Style: Flat Colour: Black

Read more less

MOUNTING A LavALIER MICROPHONE IN CLOTHING OR COSTUMES AND ON THE BODY HAS JUST BECOME MUCH EASIER. The Lav Concealer is a soft pliable mount that covers many different mounting options, moulding itself to the surface it is attached to. Because of it's rubber material, it also acts as a shock mount, protecting the mic capsule from vibration and absorbing friction noise to give you clearer sound recordings. These innovative lav mounts fit the capsule perfectly and, along with making hiding the mic easier, protects it from a build up of glue which can result from repeatedly attaching tape directly to the mic. The Lav Concealers can be attached directly to skin or clothing using our Lav Concealer Tape. The tape is very strong, hypoallergenic and easy to apply, for mounting on fabric or skin without worry. It also includes a newly designed metal clothing clip and fabric guards, which can be applied in any configuration you like, depending on the mounting style. It can also be sewn into costumes by the costume department for daily repeated use. This Lav Concealer fits the Deity W.Lav Pro, the lavalier included in the Deity Theos System. Lav CONCEALER FEATURES CREATES SPACE:Keeps material away from the microphone capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations; making your recordings sound cleaner. SHOCK ABSORBING:The moulded rubber concealer is made for excellent vibration and friction absorption, while the metal clothing clip and fabric guards prevent the transmission of vibration through the concealer to the microphone capsule. COLOUR OPTIONS:Available in Matte Black or Matte White finish. The matte finish is non-reflective for discrete hiding. WIRE FABRIC GUARDS:The removable wire fabric guard keeps fabric from touching the microphone capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting transmission of friction to the mic capsule. EXTREME FABRIC GUARD:Also included is the new Extreme Fabric Guard; it moves the point of contact between the fabric and the guard, to a more central position over the body of the Lav Concealer . This can be used where the subject is wearing clothing which is made from a particularly coarse or noisy material. Both fabric guards can be used together, in lieu of the clothing clip, if the situation calls for it. CLIP, TAPE OR SEWING MOUNTING OPTIONS:Provides many options for mounting lavalier mics on talent easily, effectively and quickly, many times under high pressure on sets. ENVIRONMENTALLY SOUND:The Lav Concealer is made from 100% natural rubber, which is biodegradable and kind to the environment. The black and white versions don't use any harmful chemical compounds to achieve the colouring. The natural rubber used in manufacturing The Lav Concealer is biodegradable, which the environment will thank you for. In terms of clarity, using a soft, pliable rubber means it absorbs more vibrations than harder materials (eg. plastic), preventing unnecessary noise from ever reaching the microphone capsule. The Lav Concealer includes two fabric guards and a clothing clip, made of sprung metal. These attach to the concealer in tiny holes on the front and back. Having two different materials operating in unison helps prevent friction or vibrations from being transferred from one to the other, and eventually to the capsule. It moulds to your mounting style: Both the clothing clip and fabric guards are removable, and you can mount them on the front, back, top-side or bottom-side of The Lav Concealer. For the ultimate fabric guard configuration, use tape to attach the concealer and mount the Extreme fabric guard on the top-side of the Lav Concealer, with the regular fabric guard on the bottom, to lift the fabric off the entire concealer. WHAT’S INCLUDED: 1x Rubber Lav Concealer (Black/White) 1x Metal Clothing Clip (Black/Silver) 1x Wire Fabric Guard (Black/Silver) 1x Wire Fabric Guard Extreme (Black/Silver) (Specific Models) 6x Lav Concealer Tape

Read more less

These Emergency Blankets can be used as camera covers that are perfect for keeping dust and light rain off your camera and head when they are not in use. Silver inside to help reflect heat/sun. Available in red or blue aka spaceblanket. space blanket

Read more less

The Bondhus 15264 5MM T-Bar Allen Key is made from a high quality of steel which is very durable and has excellent resistance to corrosion making this Allen Key last a long time. Features: T-Bar handle with a comfortable grip handle Has a 5mm hex tip Made from ProTanium steel which has high durability

Read more less

Temperature resistant, self-adhesive foil Helps control light spills in professional TV, movie and theatre production Temperature resistant up to 180°c*** Self-adhesive Flexible Conformable Easy to tear Backing liner for easy application Block out light spillsTake control of light spills with BlackTak™ Light Masking Foil. A self-adhesive, heat-resistant foil, capable of resisting temperatures up to 180°c once applied***. Designed specifically for use in the professional TV, theatre and movie industry. Matt Black, Non-Reflective Top SurfaceThe ultra-discreet, non-reflective top surface minimises reflection from ambient light. This helps BlackTak™ Light Masking Foil to go as unnoticed as possible, ideal for most professional lighting environments. PLEASE NOTE: For best results, we recommend applying to a surface that is smooth, clean, dry, non-porous and free from dust, oil and other contaminants. Stated performance figures and specification are based on average values and should not be regarded as maximum or minimum values. Measurements are approximate. Due to the nature of this product, performance may deteriorate over time. Due to varying application environments, the suggested uses should be considered as a general guide only. We recommend all users assesses the suitability of our products for their individual application and refer to our full technical datasheet before use.

Read more less

Plush Circles are a brand new 5mm length short fur LAV covers. Designed to use under costumes to help disguise mics, reduce clothing noise and protect the mic from light wind. 25mm diameter, super soft, re-useable lav mic covers. More About URSA Plush Circles Multipacks contain 3x White, 3x Black, 3x Beige & 30 Stickies. Single Colour Packs contain 9 of one colour & 30 Stickies. Available in 4 colours : Black, White, Beige & Brown. 25mm diameter, re-useable & super soft Low profile lav cover creates less of a lump under costumes.

Read more less